Linux version 2.4.21-59-default (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 Mon Sep 1 14:57:09 UTC 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fdf0000 (usable) BIOS-e820: 000000001fdf0000 - 000000001fdff000 (ACPI data) BIOS-e820: 000000001fdff000 - 000000001fe00000 (ACPI NVS) BIOS-e820: 000000001fe00000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 503MB vmalloc/ioremap area available. 0MB HIGHMEM available. 509MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 130544 zone(0): 4096 pages. zone(1): 126448 pages. zone(2): 0 pages. ACPI: RSDP (v000 PTLTD ) @ 0x000f6f50 ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x1fdf9a20 ACPI: FADT (v001 SiS 648 01540.00000) @ 0x1fdfef64 ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x1fdfefd8 ACPI: DSDT (v001 PTLTD 635 01540.00000) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present Building zonelist for node : 0 Kernel command line: root=/dev/hda3 vga=0x317 splash=0 apic pci=acpi hdc=ide-scsi hdclun=0 splash=silent splash=silent PCI: Unknown option `acpi' ide_setup: hdc=ide-scsi ide_setup: hdclun=0 bootsplash: silent mode. bootsplash: silent mode. No local APIC present or hardware disabled Initializing CPU#0 Detected 2600.136 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 5128.19 BogoMIPS Memory: 512264k/522176k available (1576k kernel code, 9524k reserved, 602k data, 160k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebf9ff 00000000 00000000 00000000 CPU: Common caps: bfebf9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030619 PCI: PCI BIOS revision 2.10 entry at 0xfd9d8, last bus=1 PCI: Using configuration type 1 Looking for DSDT in initrd ... not found! ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs *5) ACPI: PCI Interrupt Link [LNKD] (IRQs *5) ACPI: PCI Interrupt Link [LNKE] (IRQs *5) ACPI: PCI Interrupt Link [LNKF] (IRQs *5) ACPI: PCI Interrupt Link [LNKG] (IRQs *5) ACPI: PCI Interrupt Link [LNKH] (IRQs 5) ACPI: Power Resource [FN10] (off) ACPI: Power Resource [FN11] (off) PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. PISCH: Plug In Scheduler Interface (Version 6) Starting kswapd bigpage subsystem: allocated 0 bigpages (=0MB). kinoded started VFS: Disk quotas vdquot_6.5.1 aio_setup: num_physpages = 32636 aio_setup: sizeof(struct page) = 48 vesafb: framebuffer at 0xe8000000, mapped to 0xe0819000, size 12288k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:f0d0 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... silenjpeg size 30311 bytes, found (1024x768, 23130 bytes, v3). Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled PCI: Enabling device 00:02.6 (0000 -> 0001) Real Time Clock Driver v1.10e floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 16 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATCS04-0, ATA DISK drive blk: queue c03bae60, I/O limit 4095Mb (mask 0xffffffff) hdc: QSI CD-RW/DVD-ROM SBW-241, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=4864/255/63, UDMA(100) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. cryptoapi: loaded RAMDISK: Compressed image found at block 0 Freeing initrd memory: 447k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 160k freed slmdm: version 2.7.9 Jan 26 2003 16:47:22 (Smart Link Ltd.). slmdm: country set is 0xb5 (USA). Smart Link AMRMO modem. amrmo: probe 1039:7013 Silicon Integrated Systems [SiS] 56k Winmodem (Smart Link HAMR5600 compatible) : SiS630 card... This driver is not compatible with the installed modem codec. Please contact your modem provider for support. slmdm: cannot open file `/var/lib/slmdm.data': errno 30 EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal MSDOS FS: IO charset iso8859-1 SCSI subsystem driver Revision: 1.00 hdc: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: QSI Model: CDRW/DVD SBW-241 Rev: VF10 Type: CD-ROM ANSI SCSI revision: 02 sis900.c: v1.08.06 9/24/2002 eth0: ICS LAN PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 5, 00:40:ca:be:31:f3. eth0: Media Link On 100mbps full-duplex usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Enabling device 00:03.3 (0000 -> 0002) ehci_hcd 00:03.3: PCI device 1039:7002 (Silicon Integrated Systems [SiS]) ehci_hcd 00:03.3: irq 5, pci mem e142e000 usb.c: new USB bus registered, assigned bus number 1 PCI: 00:03.3 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. PCI: 00:03.3 PCI cache line size corrected to 32. ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 6 ports detected usb-uhci.c: $Revision: 1.275 $ time 15:12:21 Sep 1 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver uhci.c: USB Universal Host Controller Interface driver v1.1 usb-ohci.c: USB OHCI at membase 0xe1441000, IRQ 5 usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] 7001 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-ohci.c: USB OHCI at membase 0xe1443000, IRQ 5 usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] 7001 (#2) usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-ohci.c: USB OHCI at membase 0xe1467000, IRQ 5 usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] 7001 (#3) usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected mice: PS/2 mouse device common for all mice Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 BlueZ Core ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky BlueZ L2CAP ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky BlueZ HCI USB driver ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky usb.c: registered new driver hci_usb ACPI: AC Adapter [ACAD] (on-line) Asus Laptop ACPI Extras version 0.24a ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Fan [FN1] (off) ACPI: Fan [FN2] (off) ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states) ACPI: Thermal Zone [THRM] (29 C) PCI: Enabling device 00:02.7 (0000 -> 0001) intel8x0: clocking to 48000 IPsec Security Association Database (SADB): initialized. IPsec Security Policy Database (SPD): initialized. IPsec PF_KEY V2: initialized IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0 IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] lp0: using parport0 (polling). usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 dazuko: loaded, version=1.2.1, dev_major=254 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4363 Sat Apr 19 17:46:46 PDT 2003 Linux video capture interface: v1.00