[opensuse-kernel] 11.0 released kernel problems
Hi, I'm struggling with two kernel issues of 11.0: - Bug 401119 - ntp doesn't work with serial DCF receiver (Greg, I tried to CC you on the bug, but the dreaded bugzilla refrained from sending the message to you..) and today another issue appeared, that didn't happen on my hefty modded 10.2 (2.6.25.4): I tried to use my Canon Powershot as a capture device. Plug in: Jun 18 23:03:10 stan kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2 Jun 18 23:03:10 stan kernel: usb 1-5: configuration #1 chosen from 1 choice Jun 18 23:03:10 stan kernel: usb 1-5: New USB device found, idVendor=04a9, idProduct=311a Jun 18 23:03:10 stan kernel: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 18 23:03:10 stan kernel: usb 1-5: Product: Canon Digital Camera Jun 18 23:03:10 stan kernel: usb 1-5: Manufacturer: Canon Inc. "gphoto2 --set-config capture=on --capture-image" resulted in: Jun 18 23:04:01 stan kernel: ehci_hcd 0000:00:0b.1: HC died; cleaning up Jun 18 23:04:01 stan kernel: usb 1-5: USB disconnect, address 2 unplug: Jun 18 23:10:07 stan kernel: irq 21: nobody cared (try booting with the "irqpoll" option) Jun 18 23:10:07 stan kernel: Pid: 0, comm: swapper Tainted: P N 2.6.25.5-1.1-pae #1 Jun 18 23:10:07 stan kernel: [<c01071d9>] dump_trace+0x63/0x227 Jun 18 23:10:07 stan kernel: [<c0107c8a>] show_trace+0x15/0x29 Jun 18 23:10:07 stan kernel: [<c02e84b5>] _etext+0x5b/0x65 Jun 18 23:10:07 stan kernel: [<c01556bc>] __report_bad_irq+0x2e/0x6f Jun 18 23:10:07 stan kernel: [<c01558bc>] note_interrupt+0x1bf/0x217 Jun 18 23:10:07 stan kernel: [<c0155e6c>] handle_fasteoi_irq+0x8f/0xaf Jun 18 23:10:07 stan kernel: [<c010830c>] do_IRQ+0x71/0x89 Jun 18 23:10:07 stan kernel: [<c0106a33>] common_interrupt+0x23/0x30 Jun 18 23:10:07 stan kernel: [<c012199d>] finish_task_switch+0x2a/0xa6 Jun 18 23:10:07 stan kernel: [<c02e30d1>] schedule+0x690/0x6ef Jun 18 23:10:07 stan kernel: [<c0104a4e>] cpu_idle+0xbb/0xc0 Jun 18 23:10:07 stan kernel: [<c02d7301>] rest_init+0x49/0x4b Jun 18 23:10:07 stan kernel: [<c04938a0>] start_kernel+0x32a/0x332 Jun 18 23:10:07 stan kernel: ======================= Jun 18 23:10:07 stan kernel: handlers: Jun 18 23:10:07 stan kernel: [<f90e0f81>] (usb_hcd_irq+0x0/0x57 [usbcore]) Jun 18 23:10:07 stan kernel: Disabling IRQ #21 reboot... Suggestions are highly appreciated (apart from hacking this into bugzilla, if not known already, but I'm just to tired ATM).. Pete -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org
On Thu, Jun 19, 2008 at 12:51:30AM +0200, Hans-Peter Jansen wrote:
Hi,
I'm struggling with two kernel issues of 11.0: - Bug 401119 - ntp doesn't work with serial DCF receiver (Greg, I tried to CC you on the bug, but the dreaded bugzilla refrained from sending the message to you..)
Just file a bug assigned to the kernel component, if that is responsible, and I will get it eventually. Or, add gregkh@novell.com as a CC: member. Or just let me know what bugzilla number you are referring to.
and today another issue appeared, that didn't happen on my hefty modded 10.2 (2.6.25.4):
I tried to use my Canon Powershot as a capture device.
Plug in:
Jun 18 23:03:10 stan kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2 Jun 18 23:03:10 stan kernel: usb 1-5: configuration #1 chosen from 1 choice Jun 18 23:03:10 stan kernel: usb 1-5: New USB device found, idVendor=04a9, idProduct=311a Jun 18 23:03:10 stan kernel: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 18 23:03:10 stan kernel: usb 1-5: Product: Canon Digital Camera Jun 18 23:03:10 stan kernel: usb 1-5: Manufacturer: Canon Inc.
"gphoto2 --set-config capture=on --capture-image" resulted in:
Jun 18 23:04:01 stan kernel: ehci_hcd 0000:00:0b.1: HC died; cleaning up Jun 18 23:04:01 stan kernel: usb 1-5: USB disconnect, address 2
So, your hardware died 1 minute later, not nice :(
unplug:
Jun 18 23:10:07 stan kernel: irq 21: nobody cared (try booting with the "irqpoll" option) Jun 18 23:10:07 stan kernel: Pid: 0, comm: swapper Tainted: P N 2.6.25.5-1.1-pae #1
Can you reproduce this on a untainted kernel? thanks, greg k-h -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org
Am Donnerstag, 19. Juni 2008 schrieb Greg KH:
On Thu, Jun 19, 2008 at 12:51:30AM +0200, Hans-Peter Jansen wrote:
Hi,
I'm struggling with two kernel issues of 11.0: - Bug 401119 - ntp doesn't work with serial DCF receiver (Greg, I tried to CC you on the bug, but the dreaded bugzilla refrained from sending the message to you..)
Just file a bug assigned to the kernel component, if that is responsible, and I will get it eventually.
It is filed as base component, since it happens with a serial ntp device, but it strongly smells like a kernel issue. See: http://marc.info/?l=linux-kernel&m=121088057315460&w=2 Filed as: https://bugzilla.novell.com/show_bug.cgi?id=401119
Or, add gregkh@novell.com as a CC: member.
Or just let me know what bugzilla number you are referring to.
I was already, I thought, that referring to a bug number implicitely points to novell bugzilla in this ML, if not specified otherwise.
and today another issue appeared, that didn't happen on my hefty modded 10.2 (2.6.25.4):
I tried to use my Canon Powershot as a capture device.
Plug in:
Jun 18 23:03:10 stan kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2 Jun 18 23:03:10 stan kernel: usb 1-5: configuration #1 chosen from 1 choice Jun 18 23:03:10 stan kernel: usb 1-5: New USB device found, idVendor=04a9, idProduct=311a Jun 18 23:03:10 stan kernel: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 18 23:03:10 stan kernel: usb 1-5: Product: Canon Digital Camera Jun 18 23:03:10 stan kernel: usb 1-5: Manufacturer: Canon Inc.
"gphoto2 --set-config capture=on --capture-image" resulted in:
Jun 18 23:04:01 stan kernel: ehci_hcd 0000:00:0b.1: HC died; cleaning up Jun 18 23:04:01 stan kernel: usb 1-5: USB disconnect, address 2
So, your hardware died 1 minute later, not nice :(
No, it died immediately after running the command above.
unplug:
Jun 18 23:10:07 stan kernel: irq 21: nobody cared (try booting with the "irqpoll" option) Jun 18 23:10:07 stan kernel: Pid: 0, comm: swapper Tainted: P N 2.6.25.5-1.1-pae #1
Can you reproduce this on a untainted kernel?
Done and filed as: https://bugzilla.novell.com/show_bug.cgi?id=401730 Pete -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org
participants (2)
-
Greg KH -
Hans-Peter Jansen