April 2015 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] kernel-default-base-2.6.29-5.2.x86_64 rpm errors
by Dave Plater 18 Jul '24

18 Jul '24

Hi, I'm busy updating to the latest factory kernel and have received the following errors from kernel-default-base installation (I did insert a blank dvd during the installation of the rpm by zypper):- WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol register_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_ioctl WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_media_changed WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_get_media_event WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_release WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_open WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol unregister_cdrom WARNING: /lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sr_mod.ko needs unknown symbol cdrom_number_of_slots And then these errors which I think IIRC happened before when the kernel was first split into three:- Kernel image: /boot/vmlinuz-2.6.29-rc8-5-default Initrd image: /boot/initrd-2.6.29-rc8-5-default Root device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part3 (/dev/sda3) (mounted on / as xfs) Resume device: /dev/disk/by-id/ata-WDC_WD800JB-00JJC0_WD-WMAM9RA78067-part2 (/dev/sda2) FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module piix not found. WARNING: no dependencies for kernel module 'piix' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. Kernel Modules: scsi_mod libata ata_piix edd ahci sd_mod usbcore ohci-hcd ehci-hcd uhci-hcd WARNING: /dev/shm/mkinitramfs.0drQsZ/mnt/lib/modules/2.6.29-rc8-5-default/kernel/drivers/scsi/sd_mod.ko needs unknown symbol crc_t10dif Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 22669 blocks Should I open a bug report about the errors which are possibly from inserting a dvd while the kernel rpm was installing? Regards Dave P -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 2

[opensuse-kernel] Kernel:linux-next: ARM
by Matwey V. Kornilov 06 Oct '15

06 Oct '15

Hi, Could we have ARM builds for Kernel:linux-next? The reason behind is that our kernel in Kernel:HEAD usually not even builds for early rc-s due to carefully applied upstream bugs. It would be great to be able to detect build failures as early as possible and report the problems upstream. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 5

[opensuse-kernel] 32bit 13.2 panic when no apm=off on cmdline
by Felix Miata 20 Sep '15

20 Sep '15

I just spent most of the past several days getting this Intel 2 core E6700 P965/ICH8 RAID1 system switched from 11.4 to 13.1 and 13.2 in multiboot via Grub Legacy on primary partition. To do so, I used a single HD Intel 2 core E7600 mule/testing system with 2 new disks added, using running 13.1's yast to build all RAID devices on the new pair prior to initializing 13.1 installation. I eventually got both 13.1 and 13.2 booting and running satisfactorily, restored an rsync backup of user data to the RAID, then shut down this system and moved the RAID pair to it. 13.1 worked satisfactorily immediately, including NIC config retaining fixed IP on eth0. 13.2 spewed trap/segfault errors in a neverending stream virtually instantly in trying to boot from some cmdline config attempts. Many of the others ended in trap data, blinking keyboard LEDs and frozen screen claiming reboot would occur in 90 seconds. The failsafe stanza provided boot, but during init many errors were spewed on tty1 among normal messages. Before I even thought to try failsafe, I chrooted from 13.1 to zypper up and update kernel from 3.16.6 to 3.16.7, then when that didn't help, TW's 3.18.3, also no help. I booted failsafe taking one more option off cmdline each time about 8 times until the only rescue options left were noresume and apm=off, so apm=off definitely functions to get a working boot, yet not without seeing the error stream on tty1. The last attempt without apm=off produced the frozen screen and keyboard condition. I looked in the mailing list archives and Bugzilla, but didn't find anything I recognized as similar. Is there something journalctl can capture that can help someone help me figure out if this is a 13.2 bug that may have escaped discovery before now? FWIW, installing new kernels via chroot produces 13.2 initrds 50% bigger than those happening on account of zypper up processing. Here out of habit, zypper up/dup excludes adding a new kernel. I zypper al kernel* first, up, unlock, then repeat, so that the new kernel's initrd is guaranteed to be built once only. Also FWIW, 13.1 (like 11.4 did) requires clock=hpet on cmdline to prevent clock apparently overpowering ntp. While asleep last night it gained something like 10 minutes in 6 hours. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 5

[opensuse-kernel] multiple "BAR 14: failed to assign". found fix, adding 'pci=realloc', but makes it worse?
by lyndat3＠your-mail.com 27 May '15

27 May '15

Booting opensuse 13.2 to uname -rm 3.19.4-1.g74c332b-xen x86_64 I notice in the boot logs dmesg | grep -i " pci " | egrep "fail|space" [ 0.338499] pci 0000:08:00.0: BAR 14: no space for [mem size 0x00400000] [ 0.338500] pci 0000:08:00.0: BAR 14: failed to assign [mem size 0x00400000] [ 0.338501] pci 0000:08:00.0: BAR 14: no space for [mem size 0x00400000] [ 0.338502] pci 0000:08:00.0: BAR 14: failed to assign [mem size 0x00400000] [ 0.338505] pci 0000:09:01.0: BAR 14: no space for [mem size 0x00400000] [ 0.338506] pci 0000:09:01.0: BAR 14: failed to assign [mem size 0x00400000] [ 0.338507] pci 0000:09:01.0: BAR 14: no space for [mem size 0x00400000] [ 0.338508] pci 0000:09:01.0: BAR 14: failed to assign [mem size 0x00400000] Found mention of that error "PCI Out of Resources" http://permalink.gmane.org/gmane.linux.kernel.pci/40845 added 'pci=realloc' cat /proc/cmdline root=... pci=realloc recreated initrd & rebooted. Unfortunately, it made it worse. dmesg | grep -i " pci " | egrep "fail|space" [ 0.338475] pci 0000:08:00.0: BAR 14: no space for [mem size 0x00400000] [ 0.338476] pci 0000:08:00.0: BAR 14: failed to assign [mem size 0x00400000] [ 0.338477] pci 0000:09:01.0: BAR 14: no space for [mem size 0x00400000] [ 0.338478] pci 0000:09:01.0: BAR 14: failed to assign [mem size 0x00400000] [ 0.339172] pci 0000:08:00.0: BAR 14: no space for [mem size 0x00400000] [ 0.339173] pci 0000:08:00.0: BAR 14: failed to assign [mem size 0x00400000] [ 0.339174] pci 0000:09:01.0: BAR 14: no space for [mem size 0x00400000] [ 0.339175] pci 0000:09:01.0: BAR 14: failed to assign [mem size 0x00400000] [ 0.339845] pci 0000:06:04.0: BAR 14: no space for [mem size 0x00500000] [ 0.339846] pci 0000:06:04.0: BAR 14: failed to assign [mem size 0x00500000] [ 0.339874] pci 0000:08:00.0: BAR 14: no space for [mem size 0x00400000] [ 0.339875] pci 0000:08:00.0: BAR 14: failed to assign [mem size 0x00400000] [ 0.339876] pci 0000:08:00.0: BAR 0: no space for [mem size 0x00004000] [ 0.339877] pci 0000:08:00.0: BAR 0: failed to assign [mem size 0x00004000] [ 0.339878] pci 0000:09:01.0: BAR 14: no space for [mem size 0x00400000] [ 0.339879] pci 0000:09:01.0: BAR 14: failed to assign [mem size 0x00400000] [ 0.340596] pci 0000:05:00.0: BAR 14: no space for [mem size 0x00800000] [ 0.340597] pci 0000:05:00.0: BAR 14: failed to assign [mem size 0x00800000] [ 0.340599] pci 0000:06:04.0: BAR 14: no space for [mem size 0x00500000] [ 0.340600] pci 0000:06:04.0: BAR 14: failed to assign [mem size 0x00500000] [ 0.340601] pci 0000:06:07.0: BAR 14: no space for [mem size 0x00100000] [ 0.340602] pci 0000:06:07.0: BAR 14: failed to assign [mem size 0x00100000] [ 0.340603] pci 0000:06:09.0: BAR 14: no space for [mem size 0x00200000] [ 0.340604] pci 0000:06:09.0: BAR 14: failed to assign [mem size 0x00200000] [ 0.340632] pci 0000:08:00.0: BAR 14: no space for [mem size 0x00400000] [ 0.340633] pci 0000:08:00.0: BAR 14: failed to assign [mem size 0x00400000] [ 0.340634] pci 0000:09:01.0: BAR 14: no space for [mem size 0x00400000] [ 0.340635] pci 0000:09:01.0: BAR 14: failed to assign [mem size 0x00400000] [ 0.340804] pci 0000:0d:00.0: BAR 0: no space for [mem size 0x00002000 64bit] [ 0.340805] pci 0000:0d:00.0: BAR 0: failed to assign [mem size 0x00002000 64bit] [ 0.340832] pci 0000:0e:00.0: BAR 14: no space for [mem size 0x00100000] [ 0.340833] pci 0000:0e:00.0: BAR 14: failed to assign [mem size 0x00100000] [ 0.340834] pci 0000:0e:00.0: BAR 1: no space for [mem size 0x00001000] [ 0.340835] pci 0000:0e:00.0: BAR 1: failed to assign [mem size 0x00001000] [ 0.340837] pci 0000:0f:00.0: BAR 1: no space for [mem size 0x00004000] [ 0.340838] pci 0000:0f:00.0: BAR 1: failed to assign [mem size 0x00004000] [ 0.340839] pci 0000:0f:00.0: BAR 0: no space for [mem size 0x00000800] [ 0.340840] pci 0000:0f:00.0: BAR 0: failed to assign [mem size 0x00000800] What are these errors, and what's a fix, if not the 'pci=realloc'? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

4 10

[opensuse-kernel] Set SCSI_MQ_DEFAULT=n in Kernel:stable
by David Sterba 24 Apr '15

24 Apr '15

Hi, currently the scsi-mq is set to Y, since 3.18-rc1 merge. The option enables a feature that makes advantage of enterprise-class storage. It's known not to perform well on slower devices [1] and lacks scheduler support. We'll set the option to N in our stable kernels. The lack of scheduler support can cause significant performance drop. Vojtech reports 10-50x slowdown on random read workloads, the disks seek all over the platters due to the missing io scheduler optimizations. As most of our users are not likely to run on high-end storage devices or otherwise benefit from the scsi-mq feature, I believe it's safe to turn the scsi-mq option off. Once the io scheduler support is availabe we can enable it again. The change will be done for all architectures and all kernel flavors (30 changes in total). [1] http://www.spinics.net/lists/linux-scsi/msg75246.html -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

4 11

[opensuse-kernel] Boot to kernel-xen 3.19.4 fails to "Start Load Kernel Modules" because it can't "find module 'xen-acpi-processor'". Is this bug or config?
by lyndat3＠your-mail.com 21 Apr '15

21 Apr '15

After booting to uname -r 3.19.4-1.g74c332b-xen Boot log fails include dmesg | grep -i modules [ 0.144000] Modules linked in: [ 4.357642] systemd[1]: Failed to start Load Kernel Modules. [ 25.284199] systemd-modules-load[779]: Inserted module 'pciback' [ 35.284122] systemd-modules-load[779]: Failed to find module 'xen-acpi-processor' [ 45.312110] systemd-modules-load[779]: Inserted module 'blktap2' [ 47.972022] systemd[1]: Failed to start Load Kernel Modules. Systemd's service fails systemctl status systemd-modules-load.service systemd-modules-load.service - Load Kernel Modules Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static) Active: failed (Result: exit-code) since Sat 2015-04-18 14:59:05 PDT; 27min ago Docs: man:systemd-modules-load.service(8) man:modules-load.d(5) Process: 779 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE) Main PID: 779 (code=exited, status=1/FAILURE) The module exists locate xen | grep acpi | grep proc | grep 3.19.4 /lib/modules/3.19.4-1.g74c332b-xen/kernel/drivers/acpi/processor.ko is not loaded after boot lsmod | grep acpi acpi_pad 12960 0 Can't be loaded by the given name modprobe xen-acpi-processor modprobe: FATAL: Module xen-acpi-processor not found. And isn't mentioned (as CONFIG_XEN_ACPI_PROCESSOR) in the kernel config grep PROCESSOR /boot/config-3.19.4-1.g74c332b-xen # CONFIG_PROCESSOR_SELECT is not set CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_PROCESSOR_AGGREGATOR=m CONFIG_PROCESSOR_EXTERNAL_CONTROL=y On this server xenpm get-cpufreq-states cpu id : 0 total P-states : 16 usable P-states : 16 current frequency : 800 MHz P0 [3101 MHz]: transition [ 314] residency [ 13730 ms] P1 [3100 MHz]: transition [ 4] residency [ 23 ms] P2 [2900 MHz]: transition [ 2] residency [ 21 ms] P3 [2800 MHz]: transition [ 7] residency [ 33 ms] P4 [2600 MHz]: transition [ 5] residency [ 4 ms] P5 [2400 MHz]: transition [ 4] residency [ 0 ms] P6 [2300 MHz]: transition [ 3] residency [ 21 ms] P7 [2100 MHz]: transition [ 8] residency [ 30 ms] P8 [1900 MHz]: transition [ 5] residency [ 2 ms] P9 [1800 MHz]: transition [ 12] residency [ 56 ms] P10 [1600 MHz]: transition [ 5] residency [ 13 ms] P11 [1500 MHz]: transition [ 7] residency [ 39 ms] P12 [1300 MHz]: transition [ 8] residency [ 34 ms] P13 [1100 MHz]: transition [ 5] residency [ 33 ms] P14 [1000 MHz]: transition [ 20] residency [ 123 ms] *P15 [ 800 MHz]: transition [ 296] residency [ 6896 ms] xenpm get-cpufreq-para cpu id : 0 affected_cpus : 0 cpuinfo frequency : max [3101000] min [800000] cur [3100000] scaling_driver : acpi-cpufreq scaling_avail_gov : userspace performance powersave ondemand current_governor : ondemand ondemand specific : sampling_rate : max [10000000] min [10000] cur [20000] up_threshold : 80 scaling_avail_freq : 3101000 3100000 2900000 2800000 2600000 2400000 2300000 2100000 1900000 1800000 1600000 1500000 1300000 1100000 1000000 *800000 scaling frequency : max [3101000] min [800000] cur [800000] turbo mode : enabled [CPU1] failed to get cpufreq parameter [CPU2] failed to get cpufreq parameter [CPU3] failed to get cpufreq parameter I want to fix, or avoid, the on-boot systemd failure. Is this a bug, or a config fix? LT -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

4 8

[opensuse-kernel] [PATCH] add USB gadget functions
by Bernhard M. Wiedemann 16 Apr '15

16 Apr '15

this should be useful to emulate a USB-keyboard and mass-storage for use in future openQA hardware-testing --- config/armv7hl/default | 62 ++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 47 insertions(+), 15 deletions(-) diff --git a/config/armv7hl/default b/config/armv7hl/default index dbfcc94..760f002 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -5870,9 +5870,9 @@ CONFIG_USBIP_VHCI_HCD=m CONFIG_USBIP_HOST=m # CONFIG_USBIP_DEBUG is not set CONFIG_USB_MUSB_HDRC=m -CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_HOST is not set # CONFIG_USB_MUSB_GADGET is not set -# CONFIG_USB_MUSB_DUAL_ROLE is not set +CONFIG_USB_MUSB_DUAL_ROLE=y # # Platform Glue Layer @@ -5923,9 +5923,10 @@ CONFIG_USB_CHIPIDEA_HOST=y # CONFIG_USB_CHIPIDEA_DEBUG is not set CONFIG_USB_ISP1760=m CONFIG_USB_ISP1760_HCD=y -CONFIG_USB_ISP1760_HOST_ROLE=y +# CONFIG_USB_ISP1760_HOST_ROLE is not set # CONFIG_USB_ISP1760_GADGET_ROLE is not set -# CONFIG_USB_ISP1760_DUAL_ROLE is not set +CONFIG_USB_ISP1760_DUAL_ROLE=y +CONFIG_USB_ISP1761_UDC=y # # USB port drivers @@ -6067,31 +6068,62 @@ CONFIG_USB_MV_U3D=m CONFIG_USB_GADGET_XILINX=m # CONFIG_USB_DUMMY_HCD is not set CONFIG_USB_LIBCOMPOSITE=m +CONFIG_USB_F_ACM=m +CONFIG_USB_U_SERIAL=m CONFIG_USB_U_ETHER=m +CONFIG_USB_F_SERIAL=m +CONFIG_USB_F_OBEX=m CONFIG_USB_F_ECM=m CONFIG_USB_F_EEM=m CONFIG_USB_F_SUBSET=m CONFIG_USB_F_RNDIS=m +CONFIG_USB_F_MASS_STORAGE=m +CONFIG_USB_F_FS=m +CONFIG_USB_F_UAC1=m +CONFIG_USB_F_UAC2=m CONFIG_USB_F_UVC=m -# CONFIG_USB_CONFIGFS is not set +CONFIG_USB_F_HID=m +CONFIG_USB_CONFIGFS=m +# CONFIG_USB_CONFIGFS_SERIAL is not set +CONFIG_USB_CONFIGFS_ACM=y +# CONFIG_USB_CONFIGFS_OBEX is not set +# CONFIG_USB_CONFIGFS_NCM is not set +# CONFIG_USB_CONFIGFS_ECM is not set +# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set +# CONFIG_USB_CONFIGFS_RNDIS is not set +# CONFIG_USB_CONFIGFS_EEM is not set +# CONFIG_USB_CONFIGFS_PHONET is not set +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +# CONFIG_USB_CONFIGFS_F_LB_SS is not set +# CONFIG_USB_CONFIGFS_F_FS is not set +CONFIG_USB_CONFIGFS_F_UAC1=y +CONFIG_USB_CONFIGFS_F_UAC2=y +# CONFIG_USB_CONFIGFS_F_MIDI is not set +CONFIG_USB_CONFIGFS_F_HID=y +CONFIG_USB_CONFIGFS_F_UVC=y # CONFIG_USB_ZERO is not set # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=m CONFIG_USB_ETH_RNDIS=y CONFIG_USB_ETH_EEM=y # CONFIG_USB_G_NCM is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FUNCTIONFS is not set -# CONFIG_USB_MASS_STORAGE is not set -# CONFIG_USB_GADGET_TARGET is not set -# CONFIG_USB_G_SERIAL is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FUNCTIONFS=m +# CONFIG_USB_FUNCTIONFS_ETH is not set +# CONFIG_USB_FUNCTIONFS_RNDIS is not set +CONFIG_USB_FUNCTIONFS_GENERIC=y +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_GADGET_TARGET=m +CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m # CONFIG_USB_G_NOKIA is not set -# CONFIG_USB_G_ACM_MS is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_HID is not set +CONFIG_USB_G_ACM_MS=m +CONFIG_USB_G_MULTI=m +CONFIG_USB_G_MULTI_RNDIS=y +# CONFIG_USB_G_MULTI_CDC is not set +CONFIG_USB_G_HID=m # CONFIG_USB_G_DBGP is not set CONFIG_USB_G_WEBCAM=m CONFIG_USB_LED_TRIG=y -- 2.1.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] [PATCH] add USB gadget functions
by Bernhard M. Wiedemann 15 Apr '15

15 Apr '15

this should be useful to emulate a USB-keyboard and mass-storage for use in future openQA hardware-testing --- config/armv7hl/default | 36 ++++++++++++++++++++++++------------ 1 file changed, 24 insertions(+), 12 deletions(-) diff --git a/config/armv7hl/default b/config/armv7hl/default index dbfcc94..bc1847f 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -5870,9 +5870,9 @@ CONFIG_USBIP_VHCI_HCD=m CONFIG_USBIP_HOST=m # CONFIG_USBIP_DEBUG is not set CONFIG_USB_MUSB_HDRC=m -CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_HOST is not set # CONFIG_USB_MUSB_GADGET is not set -# CONFIG_USB_MUSB_DUAL_ROLE is not set +CONFIG_USB_MUSB_DUAL_ROLE=y # # Platform Glue Layer @@ -6067,12 +6067,19 @@ CONFIG_USB_MV_U3D=m CONFIG_USB_GADGET_XILINX=m # CONFIG_USB_DUMMY_HCD is not set CONFIG_USB_LIBCOMPOSITE=m +CONFIG_USB_F_ACM=m +CONFIG_USB_U_SERIAL=m CONFIG_USB_U_ETHER=m +CONFIG_USB_F_SERIAL=m +CONFIG_USB_F_OBEX=m CONFIG_USB_F_ECM=m CONFIG_USB_F_EEM=m CONFIG_USB_F_SUBSET=m CONFIG_USB_F_RNDIS=m +CONFIG_USB_F_MASS_STORAGE=m +CONFIG_USB_F_FS=m CONFIG_USB_F_UVC=m +CONFIG_USB_F_HID=m # CONFIG_USB_CONFIGFS is not set # CONFIG_USB_ZERO is not set # CONFIG_USB_AUDIO is not set @@ -6080,18 +6087,23 @@ CONFIG_USB_ETH=m CONFIG_USB_ETH_RNDIS=y CONFIG_USB_ETH_EEM=y # CONFIG_USB_G_NCM is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FUNCTIONFS is not set -# CONFIG_USB_MASS_STORAGE is not set -# CONFIG_USB_GADGET_TARGET is not set -# CONFIG_USB_G_SERIAL is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FUNCTIONFS=m +# CONFIG_USB_FUNCTIONFS_ETH is not set +# CONFIG_USB_FUNCTIONFS_RNDIS is not set +CONFIG_USB_FUNCTIONFS_GENERIC=y +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_GADGET_TARGET=m +CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m # CONFIG_USB_G_NOKIA is not set -# CONFIG_USB_G_ACM_MS is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_HID is not set +CONFIG_USB_G_ACM_MS=m +CONFIG_USB_G_MULTI=m +CONFIG_USB_G_MULTI_RNDIS=y +# CONFIG_USB_G_MULTI_CDC is not set +CONFIG_USB_G_HID=m # CONFIG_USB_G_DBGP is not set CONFIG_USB_G_WEBCAM=m CONFIG_USB_LED_TRIG=y -- 2.1.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] 3.16.7-13: Problem loading in-kernel X.509 certificate
by Andrei Borzenkov 14 Apr '15

14 Apr '15

[ 0.000000] CPU0 microcode updated early to revision 0x60f, date = 2010-09-29 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.7-13-desktop (geeko@buildhost) (gcc version 4.8.3 20140627 [gcc-4_8-branch revision 212064] (SUSE Linux) ) #1 SMP PREEMPT Wed Mar 18 17:31:15 UTC 2015 (ba2afab) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.7-13-desktop root=UUID=bf08b064-2753-45b5-9af1-4fab01c9cca5 resume=/dev/system/swap splash=silent quiet showopts ... [ 1.260969] Loading compiled-in X.509 certificates [ 1.260973] Problem loading in-kernel X.509 certificate (-19) I have no idea what it tries to do but I do not like errors in kernel log :) -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 1

[opensuse-kernel] kernel-desktop-3.16.7-13.2 breaks module compatibility
by Andrei Borzenkov 14 Apr '15

14 Apr '15

After reboot no GUI came up; /lib/modules/3.16.7-13-desktop/weak-updates with nvidia links was not present. It was there for previous version bor@opensuse:~> LC_ALL=C ll /lib/modules/3.16.7-7-desktop/weak-updates/updates/ total 0 lrwxrwxrwx 1 root root 51 Apr 12 10:32 nvidia-uvm.ko -> /lib/modules/3.16.6-2-desktop/updates/nvidia-uvm.ko lrwxrwxrwx 1 root root 47 Apr 12 10:33 nvidia.ko -> /lib/modules/3.16.6-2-desktop/updates/nvidia.ko bor@opensuse:~> Attempt to load nvidia manually [ 792.370816] nvidia_uvm: disagrees about version of symbol module_layout [ 811.868133] nvidia: disagrees about version of symbol module_layout I would not expect *that* much breakage from security fix. I cannot open bugzilla right now because attempt to login enters endless redirection loop. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 1

[opensuse-kernel] [PATCH] ARMv6/v7: config: build uncommon HID drivers as modules
by Dirk Müller 07 Apr '15

07 Apr '15

92db3f1ad forgot to update ARM configs accordingly. --- config/armv6hl/default | 24 ++++++++++++------------ config/armv6hl/vanilla | 24 ++++++++++++------------ config/armv7hl/default | 22 +++++++++++----------- config/armv7hl/lpae | 24 ++++++++++++------------ config/armv7hl/vanilla | 24 ++++++++++++------------ 5 files changed, 59 insertions(+), 59 deletions(-) diff --git a/config/armv6hl/default b/config/armv6hl/default index 43f5b7a..12404db 100644 --- a/config/armv6hl/default +++ b/config/armv6hl/default @@ -2384,7 +2384,7 @@ CONFIG_ISDN_HDLC=m # Input device support # CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m CONFIG_INPUT_MATRIXKMAP=m @@ -4141,25 +4141,25 @@ CONFIG_HID_GENERIC=y # # Special HID drivers # -CONFIG_HID_A4TECH=y +CONFIG_HID_A4TECH=m CONFIG_HID_ACRUX=m # CONFIG_HID_ACRUX_FF is not set -CONFIG_HID_APPLE=y +CONFIG_HID_APPLE=m # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set -CONFIG_HID_BELKIN=y +CONFIG_HID_BELKIN=m # CONFIG_HID_BETOP_FF is not set -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m CONFIG_HID_PRODIKEYS=m CONFIG_HID_CP2112=m -CONFIG_HID_CYPRESS=y +CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y CONFIG_HID_EMS_FF=m CONFIG_HID_ELECOM=m CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=y +CONFIG_HID_EZKEY=m CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF=y CONFIG_HID_GT683R=m @@ -4171,10 +4171,10 @@ CONFIG_HID_WALTOP=m CONFIG_HID_GYRATION=m CONFIG_HID_ICADE=m CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=y +CONFIG_HID_KENSINGTON=m CONFIG_HID_LCPOWER=m CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH=m CONFIG_HID_LOGITECH_DJ=m CONFIG_HID_LOGITECH_HIDPP=m CONFIG_LOGITECH_FF=y @@ -4182,8 +4182,8 @@ CONFIG_LOGIRUMBLEPAD2_FF=y CONFIG_LOGIG940_FF=y CONFIG_LOGIWHEELS_FF=y CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m CONFIG_HID_MULTITOUCH=m CONFIG_HID_NTRIG=m CONFIG_HID_ORTEK=m diff --git a/config/armv6hl/vanilla b/config/armv6hl/vanilla index 0a773a9..a8c645a 100644 --- a/config/armv6hl/vanilla +++ b/config/armv6hl/vanilla @@ -2381,7 +2381,7 @@ CONFIG_ISDN_HDLC=m # Input device support # CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m CONFIG_INPUT_MATRIXKMAP=m @@ -4137,25 +4137,25 @@ CONFIG_HID_GENERIC=y # # Special HID drivers # -CONFIG_HID_A4TECH=y +CONFIG_HID_A4TECH=m CONFIG_HID_ACRUX=m # CONFIG_HID_ACRUX_FF is not set -CONFIG_HID_APPLE=y +CONFIG_HID_APPLE=m # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set -CONFIG_HID_BELKIN=y +CONFIG_HID_BELKIN=m # CONFIG_HID_BETOP_FF is not set -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m CONFIG_HID_PRODIKEYS=m CONFIG_HID_CP2112=m -CONFIG_HID_CYPRESS=y +CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y CONFIG_HID_EMS_FF=m CONFIG_HID_ELECOM=m CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=y +CONFIG_HID_EZKEY=m CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF=y CONFIG_HID_GT683R=m @@ -4167,10 +4167,10 @@ CONFIG_HID_WALTOP=m CONFIG_HID_GYRATION=m CONFIG_HID_ICADE=m CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=y +CONFIG_HID_KENSINGTON=m CONFIG_HID_LCPOWER=m CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH=m CONFIG_HID_LOGITECH_DJ=m CONFIG_HID_LOGITECH_HIDPP=m CONFIG_LOGITECH_FF=y @@ -4178,8 +4178,8 @@ CONFIG_LOGIRUMBLEPAD2_FF=y CONFIG_LOGIG940_FF=y CONFIG_LOGIWHEELS_FF=y CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m CONFIG_HID_MULTITOUCH=m CONFIG_HID_NTRIG=m CONFIG_HID_ORTEK=m diff --git a/config/armv7hl/default b/config/armv7hl/default index bafe55e..332b359 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -3050,7 +3050,7 @@ CONFIG_ISDN_HDLC=m # Input device support # CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m CONFIG_INPUT_MATRIXKMAP=y @@ -5564,25 +5564,25 @@ CONFIG_HID_GENERIC=y # # Special HID drivers # -CONFIG_HID_A4TECH=y +CONFIG_HID_A4TECH=m CONFIG_HID_ACRUX=m # CONFIG_HID_ACRUX_FF is not set -CONFIG_HID_APPLE=y +CONFIG_HID_APPLE=m # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set -CONFIG_HID_BELKIN=y +CONFIG_HID_BELKIN=m CONFIG_HID_BETOP_FF=m -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m CONFIG_HID_PRODIKEYS=m CONFIG_HID_CP2112=m -CONFIG_HID_CYPRESS=y +CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y CONFIG_HID_EMS_FF=m CONFIG_HID_ELECOM=m CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=y +CONFIG_HID_EZKEY=m CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF=y CONFIG_HID_GT683R=m @@ -5597,7 +5597,7 @@ CONFIG_HID_TWINHAN=m CONFIG_HID_KENSINGTON=y CONFIG_HID_LCPOWER=m CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH=m CONFIG_HID_LOGITECH_DJ=m CONFIG_HID_LOGITECH_HIDPP=m CONFIG_LOGITECH_FF=y @@ -5605,8 +5605,8 @@ CONFIG_LOGIRUMBLEPAD2_FF=y CONFIG_LOGIG940_FF=y CONFIG_LOGIWHEELS_FF=y CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m CONFIG_HID_MULTITOUCH=m CONFIG_HID_NTRIG=m CONFIG_HID_ORTEK=m diff --git a/config/armv7hl/lpae b/config/armv7hl/lpae index 05d0bad..a5b067f 100644 --- a/config/armv7hl/lpae +++ b/config/armv7hl/lpae @@ -2928,7 +2928,7 @@ CONFIG_ISDN_HDLC=m # Input device support # CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m CONFIG_INPUT_MATRIXKMAP=y @@ -5257,25 +5257,25 @@ CONFIG_HID_GENERIC=y # # Special HID drivers # -CONFIG_HID_A4TECH=y +CONFIG_HID_A4TECH=m CONFIG_HID_ACRUX=m # CONFIG_HID_ACRUX_FF is not set -CONFIG_HID_APPLE=y +CONFIG_HID_APPLE=m # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set -CONFIG_HID_BELKIN=y +CONFIG_HID_BELKIN=m CONFIG_HID_BETOP_FF=m -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m CONFIG_HID_PRODIKEYS=m CONFIG_HID_CP2112=m -CONFIG_HID_CYPRESS=y +CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y CONFIG_HID_EMS_FF=m CONFIG_HID_ELECOM=m CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=y +CONFIG_HID_EZKEY=m CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF=y CONFIG_HID_GT683R=m @@ -5287,10 +5287,10 @@ CONFIG_HID_WALTOP=m CONFIG_HID_GYRATION=m CONFIG_HID_ICADE=m CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=y +CONFIG_HID_KENSINGTON=m CONFIG_HID_LCPOWER=m CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH=m CONFIG_HID_LOGITECH_DJ=m CONFIG_HID_LOGITECH_HIDPP=m CONFIG_LOGITECH_FF=y @@ -5298,8 +5298,8 @@ CONFIG_LOGIRUMBLEPAD2_FF=y CONFIG_LOGIG940_FF=y CONFIG_LOGIWHEELS_FF=y CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m CONFIG_HID_MULTITOUCH=m CONFIG_HID_NTRIG=m CONFIG_HID_ORTEK=m diff --git a/config/armv7hl/vanilla b/config/armv7hl/vanilla index fdfbcf1..bb87ab8 100644 --- a/config/armv7hl/vanilla +++ b/config/armv7hl/vanilla @@ -3047,7 +3047,7 @@ CONFIG_ISDN_HDLC=m # Input device support # CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m CONFIG_INPUT_MATRIXKMAP=y @@ -5560,25 +5560,25 @@ CONFIG_HID_GENERIC=y # # Special HID drivers # -CONFIG_HID_A4TECH=y +CONFIG_HID_A4TECH=m CONFIG_HID_ACRUX=m # CONFIG_HID_ACRUX_FF is not set -CONFIG_HID_APPLE=y +CONFIG_HID_APPLE=m # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set -CONFIG_HID_BELKIN=y +CONFIG_HID_BELKIN=m CONFIG_HID_BETOP_FF=m -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m CONFIG_HID_PRODIKEYS=m CONFIG_HID_CP2112=m -CONFIG_HID_CYPRESS=y +CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y CONFIG_HID_EMS_FF=m CONFIG_HID_ELECOM=m CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=y +CONFIG_HID_EZKEY=m CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF=y CONFIG_HID_GT683R=m @@ -5590,10 +5590,10 @@ CONFIG_HID_WALTOP=m CONFIG_HID_GYRATION=m CONFIG_HID_ICADE=m CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=y +CONFIG_HID_KENSINGTON=m CONFIG_HID_LCPOWER=m CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH=m CONFIG_HID_LOGITECH_DJ=m CONFIG_HID_LOGITECH_HIDPP=m CONFIG_LOGITECH_FF=y @@ -5601,8 +5601,8 @@ CONFIG_LOGIRUMBLEPAD2_FF=y CONFIG_LOGIG940_FF=y CONFIG_LOGIWHEELS_FF=y CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m CONFIG_HID_MULTITOUCH=m CONFIG_HID_NTRIG=m CONFIG_HID_ORTEK=m -- 2.0.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 2

[opensuse-kernel] booting to Xen 4.5 on Grub2+UEFI gets caught in systemd journal loop?
by lyndat3＠your-mail.com 06 Apr '15

06 Apr '15

I'm working on booting Xen 4.5 on an opensuse 13.2 GRUB2+UEFI box. The system fully boots to non-Xen, kernel-default. In the Xen case, Until Xen 4.6 comes available, I have grub2 chainloading xen.efi. The .efi is found, Xen loads, and hands off to the kernel-xen boot process. It gets fairly far then gets caught in a systemd-journal loop. Output at serial console is Xen 4.5.0_03-361 (c/s ) EFI loader Using configuration file 'xen.cfg' vmlinuz-xen: 0x000000008c0d1000-0x000000008c5aaf10 initrd-xen: 0x000000008b346000-0x000000008c0d0c78 0x0000:0x00:0x19.0x0: ROM: 0x10000 bytes at 0x92963018 0x0000:0x04:0x00.0x0: ROM: 0x8000 bytes at 0x92953018 0x0000:0x10:0x00.0x0: ROM: 0x10800 bytes at 0x9293b018 Xen 4.5.0_03-361 (XEN) Xen version 4.5.0_03-361 (abuild(a)suse.de) (gcc (SUSE Linux) 4.8.3 20140627 [gcc-4_8-branch revision 212064]) debug=n Mon Mar 16 16:14:15 UTC 2015 ... (XEN) [2015-04-06 10:45:44] Xen is relinquishing VGA console. (XEN) [2015-04-06 10:45:44] *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) [2015-04-06 10:45:44] Freed 316kB init memory. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.3-1.gf10e7fc-xen (geeko@buildhost) (gcc version 4.8.3 20141208 [gcc-4_8-branch revision 218481] (SUSE Linux) ) #1 SMP Thu Mar 26 17:34:34 UTC 2015 (f10e7fc) ... [ 218.221315] systemd[1]: Accepted new private connection. [ 218.238825] systemd[1]: Got message type=signal sender=n/a destination=n/a object=/org/freedesktop/systemd1/agent interface=org.freedesktop.systemd1.Agent member=Released cookie=1 reply_cookie=0 error=n/a [ 218.238841] systemd-journald[896]: Entry is too big with 8 properties and 16924204553027465025 bytes, ignoring. [ 218.331936] systemd[1]: Got disconnect on private connection. [ 240.000517] systemd[1]: Got notification message for unit systemd-journald.service [ 240.024839] systemd[1]: systemd-journald.service: Got notification message from PID 896 (WATCHDOG=1...) ... [ 478.806639] systemd[1]: systemd-journald.service: got WATCHDOG=1 [ 478.826279] systemd[1]: Got notification message for unit systemd-journald.service [ 478.850591] systemd[1]: systemd-journald.service: Got notification message from PID 896 (WATCHDOG=1...) [ 478.882226] systemd[1]: systemd-journald.service: got WATCHDOG=1 ... [ 820.076223] systemd[1]: Got notification message for unit systemd-journald.service [ 820.100546] systemd[1]: systemd-journald.service: Got notification message from PID 896 (WATCHDOG=1...) [ 820.132191] systemd[1]: systemd-journald.service: got WATCHDOG=1 Notice the ridiculously large 'bytes' value in [ 218.238841] systemd-journald[896]: Entry is too big with 8 properties and 16924204553027465025 bytes, ignoring. Usually I'd use systemd journal & serial console to debug this. But it looks like those are the problem here. How do I get more detail out of logs to figure out what's causing this problem? LT -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] booting opensuse 13.2 server -- non-Xen & no SAS drives -- reports 'fail' at boot on xen modules and sas probes?
by lyndat3＠your-mail.com 04 Apr '15

04 Apr '15

I'm booting a non-Xen opensuse 13.2 server to uname -rm 3.19.3-1.gf10e7fc-default x86_64 I'm not booting to Xen. Xen & kernel-xen are installed, just not used. Yet. I have no sas drives; all are sata (in RAID arrays). Before migrating to Xen I'm doing housecleaning on the boot process In the boot logs I see these journalctl -b | egrep -i "sas |sas:|fail" Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'xen-evtchn' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'xen-gntdev' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'xen-gntalloc' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'xen-blkback' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'xen-netback' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'xen-pciback' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'evtchn' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'gntdev' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'netbk' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'blkbk' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'xen-scsibk' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'usbbk' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'pciback' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'xen-acpi-processor' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'blktap2' Apr 04 08:37:48 xen01 systemd-modules-load[161]: Failed to find module 'blktap' Apr 04 08:37:48 xen01 systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE Apr 04 08:37:48 xen01 systemd[1]: Failed to start Load Kernel Modules. Apr 04 08:37:48 xen01 systemd[1]: Unit systemd-modules-load.service entered failed state. Apr 04 08:37:48 xen01 rpc.statd[301]: Failed to open directory sm: No such file or directory Apr 04 08:37:55 xen01 kernel: sas: phy-12:0 added to port-12:0, phy_mask:0x1 ( 0) Apr 04 08:37:55 xen01 kernel: sas: phy-12:1 added to port-12:1, phy_mask:0x2 ( 100000000000000) Apr 04 08:37:55 xen01 kernel: sas: phy-12:2 added to port-12:2, phy_mask:0x4 ( 200000000000000) Apr 04 08:37:55 xen01 kernel: sas: phy-12:3 added to port-12:3, phy_mask:0x8 ( 300000000000000) Apr 04 08:37:55 xen01 kernel: sas: DOING DISCOVERY on port 0, pid:104 Apr 04 08:37:55 xen01 kernel: sas: DONE DISCOVERY on port 0, pid:104, result:0 Apr 04 08:37:55 xen01 kernel: sas: DOING DISCOVERY on port 1, pid:104 Apr 04 08:37:55 xen01 kernel: sas: DONE DISCOVERY on port 1, pid:104, result:0 Apr 04 08:37:55 xen01 kernel: sas: DOING DISCOVERY on port 2, pid:104 Apr 04 08:37:55 xen01 kernel: sas: DONE DISCOVERY on port 2, pid:104, result:0 Apr 04 08:37:55 xen01 kernel: sas: DOING DISCOVERY on port 3, pid:104 Apr 04 08:37:55 xen01 kernel: sas: DONE DISCOVERY on port 3, pid:104, result:0 Apr 04 08:37:55 xen01 kernel: sas: Enter sas_scsi_recover_host busy: 0 failed: 0 Apr 04 08:37:55 xen01 kernel: sas: ata13: end_device-12:0: dev error handler Apr 04 08:37:56 xen01 kernel: sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 Apr 04 08:37:56 xen01 kernel: sas: Enter sas_scsi_recover_host busy: 0 failed: 0 Apr 04 08:37:56 xen01 kernel: sas: ata13: end_device-12:0: dev error handler Apr 04 08:37:56 xen01 kernel: sas: ata14: end_device-12:1: dev error handler Apr 04 08:37:56 xen01 kernel: sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 Apr 04 08:37:56 xen01 kernel: sas: Enter sas_scsi_recover_host busy: 0 failed: 0 Apr 04 08:37:56 xen01 kernel: sas: ata13: end_device-12:0: dev error handler Apr 04 08:37:56 xen01 kernel: sas: ata14: end_device-12:1: dev error handler Apr 04 08:37:56 xen01 kernel: sas: ata15: end_device-12:2: dev error handler Apr 04 08:37:56 xen01 kernel: sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 Apr 04 08:37:56 xen01 kernel: sas: Enter sas_scsi_recover_host busy: 0 failed: 0 Apr 04 08:37:56 xen01 kernel: sas: ata13: end_device-12:0: dev error handler Apr 04 08:37:56 xen01 kernel: sas: ata14: end_device-12:1: dev error handler Apr 04 08:37:56 xen01 kernel: sas: ata15: end_device-12:2: dev error handler Apr 04 08:37:56 xen01 kernel: sas: ata16: end_device-12:3: dev error handler Apr 04 08:37:56 xen01 kernel: sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 Apr 04 08:38:13 xen01 systemd-modules-load[864]: Failed to find module 'netbk' Apr 04 08:37:59 xen01 systemd-modules-load[864]: Failed to find module 'xen-evtchn' Apr 04 08:37:59 xen01 systemd-modules-load[864]: Failed to find module 'xen-gntdev' Apr 04 08:37:59 xen01 systemd-modules-load[864]: Failed to find module 'xen-gntalloc' Apr 04 08:37:59 xen01 systemd-modules-load[864]: Failed to find module 'xen-blkback' Apr 04 08:37:59 xen01 systemd-modules-load[864]: Failed to find module 'xen-netback' Apr 04 08:37:59 xen01 systemd-modules-load[864]: Failed to find module 'xen-pciback' Apr 04 08:37:59 xen01 systemd-modules-load[864]: Failed to find module 'evtchn' Apr 04 08:37:59 xen01 systemd-modules-load[864]: Failed to find module 'gntdev' Apr 04 08:38:13 xen01 systemd-modules-load[864]: Failed to find module 'blkbk' Apr 04 08:38:13 xen01 systemd-modules-load[864]: Failed to find module 'xen-scsibk' Apr 04 08:38:13 xen01 systemd-modules-load[864]: Failed to find module 'usbbk' Apr 04 08:38:13 xen01 systemd-modules-load[864]: Failed to find module 'pciback' Apr 04 08:38:13 xen01 systemd-modules-load[864]: Failed to find module 'xen-acpi-processor' Apr 04 08:38:13 xen01 systemd-modules-load[864]: Failed to find module 'blktap2' Apr 04 08:38:13 xen01 systemd-modules-load[864]: Failed to find module 'blktap' Apr 04 08:38:13 xen01 systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE Apr 04 08:38:13 xen01 systemd[1]: Failed to start Load Kernel Modules. I'd like to remove the source of 'fails' and wasted cycles on boot. What config(s) do I need to set to prevent these checks, and their fails? LT -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] [PATCH] ARM64: stable: Fix support for ARMv7 userspace
by Dirk Müller 04 Apr '15

04 Apr '15

Hi, here's the stable backport of the patchset. please review/merge. TIA, Dirk

2 3

[opensuse-kernel] [PATCH openSUSE-13.2] arm64-fix-mmap2-compat-syscall.patch: add missing endprocedure declaration
by Dirk Müller 04 Apr '15

04 Apr '15

--- patches.arch/arm64-fix-mmap2-compat-syscall.patch | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/patches.arch/arm64-fix-mmap2-compat-syscall.patch b/patches.arch/arm64-fix-mmap2-compat-syscall.patch index 0eea377..f7760fd 100644 --- a/patches.arch/arm64-fix-mmap2-compat-syscall.patch +++ b/patches.arch/arm64-fix-mmap2-compat-syscall.patch @@ -47,7 +47,7 @@ index 423a5b3..baf024d 100644 /* * System call wrappers for the AArch32 compatibility layer. -@@ -53,6 +56,20 @@ compat_sys_fstatfs64_wrapper: +@@ -53,6 +56,25 @@ compat_sys_fstatfs64_wrapper: b compat_sys_fstatfs64 ENDPROC(compat_sys_fstatfs64_wrapper) @@ -57,6 +57,7 @@ index 423a5b3..baf024d 100644 + * Note: off_4k (w5) is always units of 4K. If we can't do the requested + * offset, we return EINVAL. + */ ++#if PAGE_SHIFT > 12 +compat_sys_mmap2_wrapper: + tst w5, #~PAGE_MASK >> 12 + b.ne 1f @@ -64,10 +65,11 @@ index 423a5b3..baf024d 100644 + b sys_mmap_pgoff +1: mov x0, #-EINVAL + ret lr ++ENDPROC(compat_sys_mmap2_wrapper) ++#else ++#define compat_sys_mmap2_wrapper sys_mmap_pgoff ++#endif + /* * Wrappers for AArch32 syscalls that either take 64-bit parameters * in registers or that take 32-bit parameters which require sign --- -2.3.1 - -- 2.0.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] [PATCH] ARM64: config: Sync vanilla with default config
by Dirk Müller 04 Apr '15

04 Apr '15

--- config/arm64/vanilla | 156 +++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 115 insertions(+), 41 deletions(-) diff --git a/config/arm64/vanilla b/config/arm64/vanilla index 1cf88fa..b763bbc 100644 --- a/config/arm64/vanilla +++ b/config/arm64/vanilla @@ -216,6 +216,7 @@ CONFIG_HAVE_RCU_TABLE_FREE=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR_NONE is not set @@ -309,7 +310,7 @@ CONFIG_ARCH_EXYNOS=y CONFIG_ARCH_EXYNOS7=y CONFIG_ARCH_FSL_LS2085A=y CONFIG_ARCH_MEDIATEK=y -# CONFIG_ARCH_SEATTLE is not set +CONFIG_ARCH_SEATTLE=y CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA_132_SOC=y CONFIG_ARCH_THUNDER=y @@ -428,7 +429,7 @@ CONFIG_ZSMALLOC=y # CONFIG_PGTABLE_MAPPING is not set # CONFIG_ZSMALLOC_STAT is not set CONFIG_GENERIC_EARLY_IOREMAP=y -# CONFIG_SECCOMP is not set +CONFIG_SECCOMP=y # CONFIG_XEN is not set CONFIG_FORCE_MAX_ZONEORDER=14 @@ -546,7 +547,7 @@ CONFIG_SYN_COOKIES=y CONFIG_NET_IPVTI=m CONFIG_NET_UDP_TUNNEL=m CONFIG_NET_FOU=m -# CONFIG_NET_FOU_IP_TUNNELS is not set +CONFIG_NET_FOU_IP_TUNNELS=y CONFIG_GENEVE=m CONFIG_INET_AH=m CONFIG_INET_ESP=m @@ -669,7 +670,7 @@ CONFIG_NFT_COUNTER=m CONFIG_NFT_LOG=m CONFIG_NFT_LIMIT=m CONFIG_NFT_MASQ=m -# CONFIG_NFT_REDIR is not set +CONFIG_NFT_REDIR=m CONFIG_NFT_NAT=m # CONFIG_NFT_QUEUE is not set # CONFIG_NFT_REJECT is not set @@ -838,6 +839,7 @@ CONFIG_NF_NAT_IPV4=m CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_NF_NAT_MASQUERADE_IPV4=m CONFIG_NFT_MASQ_IPV4=m +CONFIG_NFT_REDIR_IPV4=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PPTP=m @@ -878,6 +880,7 @@ CONFIG_NF_NAT_IPV6=m CONFIG_NFT_CHAIN_NAT_IPV6=m CONFIG_NF_NAT_MASQUERADE_IPV6=m CONFIG_NFT_MASQ_IPV6=m +CONFIG_NFT_REDIR_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -1061,7 +1064,7 @@ CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m -# CONFIG_NET_ACT_VLAN is not set +CONFIG_NET_ACT_VLAN=m CONFIG_NET_ACT_BPF=m CONFIG_NET_ACT_CONNMARK=m CONFIG_NET_CLS_IND=y @@ -1083,7 +1086,7 @@ CONFIG_NETLINK_MMAP=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m CONFIG_HSR=m -# CONFIG_NET_SWITCHDEV is not set +CONFIG_NET_SWITCHDEV=y CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y @@ -1277,7 +1280,7 @@ CONFIG_MAC80211=m CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL_HT=y -# CONFIG_MAC80211_RC_MINSTREL_VHT is not set +CONFIG_MAC80211_RC_MINSTREL_VHT=y CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" CONFIG_MAC80211_MESH=y @@ -1329,7 +1332,7 @@ CONFIG_HAVE_BPF_JIT=y # Device Drivers # CONFIG_ARM_AMBA=y -# CONFIG_TEGRA_AHB is not set +CONFIG_TEGRA_AHB=y # # Generic Driver Options @@ -1739,8 +1742,8 @@ CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_LPFC=m CONFIG_SCSI_LPFC_DEBUG_FS=y CONFIG_SCSI_DC395x=m -# CONFIG_SCSI_AM53C974 is not set -# CONFIG_SCSI_WD719X is not set +CONFIG_SCSI_AM53C974=m +CONFIG_SCSI_WD719X=m CONFIG_SCSI_DEBUG=m CONFIG_SCSI_PMCRAID=m CONFIG_SCSI_PM8001=m @@ -1931,7 +1934,7 @@ CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m # CONFIG_NET_TEAM_MODE_LOADBALANCE is not set CONFIG_MACVLAN=m CONFIG_MACVTAP=m -# CONFIG_IPVLAN is not set +CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -1997,7 +2000,7 @@ CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y CONFIG_NET_DSA_MV88E6131=m CONFIG_NET_DSA_MV88E6123_61_65=m CONFIG_NET_DSA_MV88E6171=m -# CONFIG_NET_DSA_MV88E6352 is not set +CONFIG_NET_DSA_MV88E6352=m CONFIG_NET_DSA_BCM_SF2=m CONFIG_ETHERNET=y CONFIG_MDIO=m @@ -2157,6 +2160,7 @@ CONFIG_R8169=m CONFIG_NET_VENDOR_RDC=y CONFIG_R6040=m CONFIG_NET_VENDOR_ROCKER=y +CONFIG_ROCKER=m CONFIG_NET_VENDOR_SAMSUNG=y CONFIG_SXGBE_ETH=m CONFIG_NET_VENDOR_SEEQ=y @@ -2368,7 +2372,12 @@ CONFIG_HOSTAP_PCI=m CONFIG_IPW2100=m CONFIG_IPW2100_MONITOR=y CONFIG_IPW2100_DEBUG=y -# CONFIG_IPW2200 is not set +CONFIG_IPW2200=m +CONFIG_IPW2200_MONITOR=y +CONFIG_IPW2200_RADIOTAP=y +CONFIG_IPW2200_PROMISCUOUS=y +CONFIG_IPW2200_QOS=y +CONFIG_IPW2200_DEBUG=y CONFIG_LIBIPW=m CONFIG_LIBIPW_DEBUG=y CONFIG_IWLWIFI=m @@ -2401,7 +2410,13 @@ CONFIG_LIBERTAS_SDIO=m # CONFIG_LIBERTAS_SPI is not set # CONFIG_LIBERTAS_DEBUG is not set CONFIG_LIBERTAS_MESH=y -# CONFIG_HERMES is not set +CONFIG_HERMES=m +# CONFIG_HERMES_PRISM is not set +CONFIG_HERMES_CACHE_FW_ON_INIT=y +CONFIG_PLX_HERMES=m +CONFIG_TMD_HERMES=m +CONFIG_NORTEL_HERMES=m +CONFIG_ORINOCO_USB=m CONFIG_P54_COMMON=m CONFIG_P54_USB=m CONFIG_P54_PCI=m @@ -2669,7 +2684,7 @@ CONFIG_KEYBOARD_SUNKBD=m # CONFIG_KEYBOARD_OMAP4 is not set CONFIG_KEYBOARD_XTKBD=m CONFIG_KEYBOARD_CROS_EC=m -# CONFIG_KEYBOARD_CAP11XX is not set +CONFIG_KEYBOARD_CAP11XX=m CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -2685,7 +2700,9 @@ CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_BCM5974=m # CONFIG_MOUSE_CYAPA is not set -# CONFIG_MOUSE_ELAN_I2C is not set +CONFIG_MOUSE_ELAN_I2C=m +CONFIG_MOUSE_ELAN_I2C_I2C=y +CONFIG_MOUSE_ELAN_I2C_SMBUS=y CONFIG_MOUSE_VSXXXAA=m CONFIG_MOUSE_GPIO=m # CONFIG_MOUSE_SYNAPTICS_I2C is not set @@ -2749,7 +2766,7 @@ CONFIG_TOUCHSCREEN_HAMPSHIRE=m CONFIG_TOUCHSCREEN_FUJITSU=m # CONFIG_TOUCHSCREEN_ILI210X is not set CONFIG_TOUCHSCREEN_GUNZE=m -# CONFIG_TOUCHSCREEN_ELAN is not set +CONFIG_TOUCHSCREEN_ELAN=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_WACOM_W8001=m # CONFIG_TOUCHSCREEN_WACOM_I2C is not set @@ -2934,7 +2951,7 @@ CONFIG_IPMI_PANIC_EVENT=y CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m # CONFIG_IPMI_SI_PROBE_DEFAULTS is not set -# CONFIG_IPMI_SSIF is not set +CONFIG_IPMI_SSIF=m CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=y @@ -3028,6 +3045,7 @@ CONFIG_I2C_TEGRA=m # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set +CONFIG_I2C_DLN2=m # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_ROBOTFUZZ_OSIF is not set @@ -3041,7 +3059,7 @@ CONFIG_I2C_TEGRA=m # CONFIG_I2C_CROS_EC_TUNNEL is not set # CONFIG_I2C_STUB is not set CONFIG_I2C_SLAVE=y -CONFIG_I2C_SLAVE_EEPROM=m +# CONFIG_I2C_SLAVE_EEPROM is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -3055,6 +3073,7 @@ CONFIG_SPI_MASTER=y # CONFIG_SPI_ALTERA is not set CONFIG_SPI_BITBANG=m # CONFIG_SPI_BUTTERFLY is not set +CONFIG_SPI_DLN2=m # CONFIG_SPI_GPIO is not set # CONFIG_SPI_LM70_LLP is not set CONFIG_SPI_FSL_LIB=y @@ -3134,7 +3153,7 @@ CONFIG_GPIO_GENERIC=y # # Memory mapped GPIO drivers: # -# CONFIG_GPIO_74XX_MMIO is not set +CONFIG_GPIO_74XX_MMIO=m CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_PL061=y # CONFIG_GPIO_SCH311X is not set @@ -3187,6 +3206,7 @@ CONFIG_GPIO_KEMPLD=m # USB GPIO expanders: # CONFIG_GPIO_VIPERBOARD=m +CONFIG_GPIO_DLN2=m CONFIG_W1=m CONFIG_W1_CON=y @@ -3335,7 +3355,7 @@ CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_SENSORS_NCT6683=m CONFIG_SENSORS_NCT6775=m -# CONFIG_SENSORS_NCT7802 is not set +CONFIG_SENSORS_NCT7802=m # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set CONFIG_SENSORS_PWM_FAN=m @@ -3390,7 +3410,7 @@ CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_CPU_THERMAL=y -# CONFIG_CLOCK_THERMAL is not set +CONFIG_CLOCK_THERMAL=y CONFIG_THERMAL_EMULATION=y # CONFIG_IMX_THERMAL is not set CONFIG_TEGRA_SOCTHERM=m @@ -3469,13 +3489,13 @@ CONFIG_BCMA_DRIVER_GPIO=y # Multifunction device drivers # CONFIG_MFD_CORE=y -# CONFIG_MFD_ATMEL_HLCDC is not set +CONFIG_MFD_ATMEL_HLCDC=m # CONFIG_MFD_BCM590XX is not set CONFIG_MFD_CROS_EC=m # CONFIG_MFD_CROS_EC_I2C is not set # CONFIG_MFD_CROS_EC_SPI is not set # CONFIG_MFD_DA9052_SPI is not set -# CONFIG_MFD_DLN2 is not set +CONFIG_MFD_DLN2=m # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_MFD_HI6421_PMIC is not set @@ -3610,7 +3630,7 @@ CONFIG_IR_IMON=m CONFIG_IR_MCEUSB=m CONFIG_IR_REDRAT3=m CONFIG_IR_STREAMZAP=m -# CONFIG_IR_IGORPLUGUSB is not set +CONFIG_IR_IGORPLUGUSB=m CONFIG_IR_IGUANA=m CONFIG_IR_TTUSBIR=m CONFIG_RC_LOOPBACK=m @@ -3783,7 +3803,7 @@ CONFIG_DVB_MANTIS=m CONFIG_DVB_HOPPER=m CONFIG_DVB_NGENE=m CONFIG_DVB_DDBRIDGE=m -# CONFIG_DVB_SMIPCIE is not set +CONFIG_DVB_SMIPCIE=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_CAFE_CCIC=m # CONFIG_SOC_CAMERA is not set @@ -3803,7 +3823,7 @@ CONFIG_VIDEO_SAMSUNG_S5P_MFC=m CONFIG_VIDEO_SH_VEU=m CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIVID=m -# CONFIG_VIDEO_VIM2M is not set +CONFIG_VIDEO_VIM2M=m # # Supported MMC/SDIO adapters @@ -4072,7 +4092,53 @@ CONFIG_TEGRA_HOST1X_FIREWALL=y # # Direct Rendering Manager # -# CONFIG_DRM is not set +CONFIG_DRM=m +CONFIG_DRM_MIPI_DSI=y +CONFIG_DRM_KMS_HELPER=m +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_LOAD_EDID_FIRMWARE=y +CONFIG_DRM_TTM=m + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_PTN3460 is not set +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +CONFIG_DRM_RADEON=m +# CONFIG_DRM_RADEON_UMS is not set +CONFIG_DRM_NOUVEAU=m +CONFIG_NOUVEAU_PLATFORM_DRIVER=y +CONFIG_NOUVEAU_DEBUG=5 +CONFIG_NOUVEAU_DEBUG_DEFAULT=3 +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +CONFIG_DRM_MGA=m +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_DRM_VMWGFX is not set +CONFIG_DRM_UDL=m +CONFIG_DRM_AST=m +CONFIG_DRM_MGAG200=m +CONFIG_DRM_CIRRUS_QEMU=m +CONFIG_DRM_QXL=m +CONFIG_DRM_BOCHS=m +CONFIG_DRM_TEGRA=m +CONFIG_DRM_TEGRA_FBDEV=y +# CONFIG_DRM_TEGRA_DEBUG is not set +# CONFIG_DRM_TEGRA_STAGING is not set +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +# CONFIG_DRM_PANEL_SIMPLE is not set +# CONFIG_DRM_PANEL_LD9040 is not set +# CONFIG_DRM_PANEL_S6E8AA0 is not set +# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set # # Frame buffer Devices @@ -4094,7 +4160,7 @@ CONFIG_FB_SYS_FOPS=m CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -4168,6 +4234,7 @@ CONFIG_BACKLIGHT_GPIO=m # CONFIG_BACKLIGHT_LV5207LP is not set # CONFIG_BACKLIGHT_BD6107 is not set # CONFIG_VGASTATE is not set +CONFIG_HDMI=y # # Console display driver support @@ -4346,7 +4413,7 @@ CONFIG_SND_USB_VARIAX=m CONFIG_SND_FIREWIRE=y CONFIG_SND_FIREWIRE_LIB=m CONFIG_SND_DICE=m -# CONFIG_SND_OXFW is not set +CONFIG_SND_OXFW=m CONFIG_SND_ISIGHT=m CONFIG_SND_SCS1X=m CONFIG_SND_FIREWORKS=m @@ -4423,7 +4490,7 @@ CONFIG_HID_PICOLCD_BACKLIGHT=y CONFIG_HID_PICOLCD_LCD=y CONFIG_HID_PICOLCD_LEDS=y CONFIG_HID_PICOLCD_CIR=y -# CONFIG_HID_PLANTRONICS is not set +CONFIG_HID_PLANTRONICS=m # CONFIG_HID_PRIMAX is not set CONFIG_HID_ROCCAT=m CONFIG_HID_SAITEK=m @@ -4480,7 +4547,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # CONFIG_USB_DEFAULT_PERSIST=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set +CONFIG_USB_OTG=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_OTG_FSM is not set @@ -4734,13 +4801,18 @@ CONFIG_MMC_TIFM_SD=m CONFIG_MMC_SPI=m CONFIG_MMC_CB710=m CONFIG_MMC_VIA_SDMMC=m -# CONFIG_MMC_DW is not set +CONFIG_MMC_DW=m +CONFIG_MMC_DW_IDMAC=y +CONFIG_MMC_DW_PLTFM=m +CONFIG_MMC_DW_EXYNOS=m +CONFIG_MMC_DW_K3=m +CONFIG_MMC_DW_PCI=m CONFIG_MMC_VUB300=m CONFIG_MMC_USHC=m # CONFIG_MMC_USDHI6ROL0 is not set CONFIG_MMC_REALTEK_PCI=m CONFIG_MMC_REALTEK_USB=m -# CONFIG_MMC_TOSHIBA_PCI is not set +CONFIG_MMC_TOSHIBA_PCI=m CONFIG_MEMSTICK=m # CONFIG_MEMSTICK_DEBUG is not set @@ -4775,14 +4847,14 @@ CONFIG_LEDS_GPIO=m # CONFIG_LEDS_LP5523 is not set # CONFIG_LEDS_LP5562 is not set # CONFIG_LEDS_LP8501 is not set -# CONFIG_LEDS_LP8860 is not set +CONFIG_LEDS_LP8860=m # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_PCA963X is not set # CONFIG_LEDS_DAC124S085 is not set CONFIG_LEDS_PWM=m # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2802 is not set -# CONFIG_LEDS_INTEL_SS4200 is not set +CONFIG_LEDS_INTEL_SS4200=m CONFIG_LEDS_LT3593=m # CONFIG_LEDS_TCA6507 is not set # CONFIG_LEDS_LM355x is not set @@ -5153,8 +5225,8 @@ CONFIG_DVB_CXD2099=m CONFIG_VIDEO_DT3155=m CONFIG_DT3155_CCIR=y CONFIG_DT3155_STREAMING=y -# CONFIG_DVB_MN88472 is not set -# CONFIG_DVB_MN88473 is not set +CONFIG_DVB_MN88472=m +CONFIG_DVB_MN88473=m # CONFIG_LIRC_STAGING is not set # @@ -5178,7 +5250,7 @@ CONFIG_LNET_XPRT_IB=m CONFIG_DGNC=m CONFIG_DGAP=m # CONFIG_GS_FPGABOOT is not set -# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set +CONFIG_COMMON_CLK_XLNX_CLKWZRD=m # CONFIG_FB_TFT is not set CONFIG_I2O=m CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y @@ -5464,6 +5536,7 @@ CONFIG_HID_SENSOR_PRESS=m # CONFIG_VME_BUS is not set CONFIG_PWM=y CONFIG_PWM_SYSFS=y +CONFIG_PWM_ATMEL_HLCDC_PWM=m # CONFIG_PWM_FSL_FTM is not set # CONFIG_PWM_PCA9685 is not set CONFIG_PWM_SAMSUNG=m @@ -5503,7 +5576,7 @@ CONFIG_THUNDERBOLT=m # CONFIG_FIRMWARE_MEMMAP=y CONFIG_DMIID=y -# CONFIG_DMI_SYSFS is not set +CONFIG_DMI_SYSFS=m # # EFI (Extensible Firmware Interface) Support @@ -5674,7 +5747,7 @@ CONFIG_SQUASHFS_DECOMP_SINGLE=y # CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y -# CONFIG_SQUASHFS_LZ4 is not set +CONFIG_SQUASHFS_LZ4=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set @@ -6278,6 +6351,7 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_BTREE=y +CONFIG_INTERVAL_TREE=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y -- 2.0.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] [PATCH] ARM64/ARMv6/ARMv7: config: Sync tunables with x86_64
by Dirk Müller 04 Apr '15

04 Apr '15

Set numeric tunables to the same values as on x86_64 if they're available for both platforms. --- config/arm64/default | 18 +++++++++--------- config/arm64/vanilla | 18 +++++++++--------- config/armv6hl/default | 2 +- config/armv6hl/vanilla | 2 +- config/armv7hl/default | 6 +++--- config/armv7hl/lpae | 6 +++--- config/armv7hl/vanilla | 8 ++++---- 7 files changed, 30 insertions(+), 30 deletions(-) diff --git a/config/arm64/default b/config/arm64/default index c2bac2c..ea053d5 100644 --- a/config/arm64/default +++ b/config/arm64/default @@ -1564,7 +1564,7 @@ CONFIG_BLK_DEV_OSD=m CONFIG_BLK_DEV_SX8=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_RAM_DAX is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 @@ -1699,7 +1699,7 @@ CONFIG_SCSI_ACARD=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=5000 +CONFIG_AIC7XXX_RESET_DELAY_MS=15000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y @@ -2889,7 +2889,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_LEGACY_PTY_COUNT=0 CONFIG_SERIAL_NONSTANDARD=y CONFIG_ROCKETPORT=m CONFIG_CYCLADES=m @@ -2981,7 +2981,7 @@ CONFIG_APPLICOM=m # PCMCIA character devices # CONFIG_RAW_DRIVER=m -CONFIG_MAX_RAW_DEVS=256 +CONFIG_MAX_RAW_DEVS=4096 CONFIG_TCG_TPM=m # CONFIG_TCG_TIS_I2C_ATMEL is not set # CONFIG_TCG_TIS_I2C_INFINEON is not set @@ -5999,12 +5999,12 @@ CONFIG_LOCKUP_DETECTOR=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 +CONFIG_PANIC_TIMEOUT=90 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_SCHED_STACK_END_CHECK=y @@ -6039,7 +6039,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_TORTURE_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 +CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_RCU_CPU_STALL_INFO is not set # CONFIG_RCU_TRACE is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set @@ -6128,10 +6128,10 @@ CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y -CONFIG_LSM_MMAP_MIN_ADDR=65536 +CONFIG_LSM_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y diff --git a/config/arm64/vanilla b/config/arm64/vanilla index 378d9d3..1cf88fa 100644 --- a/config/arm64/vanilla +++ b/config/arm64/vanilla @@ -1547,7 +1547,7 @@ CONFIG_BLK_DEV_OSD=m CONFIG_BLK_DEV_SX8=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_RAM_DAX is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 @@ -1682,7 +1682,7 @@ CONFIG_SCSI_ACARD=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=5000 +CONFIG_AIC7XXX_RESET_DELAY_MS=15000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y @@ -2858,7 +2858,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_LEGACY_PTY_COUNT=0 CONFIG_SERIAL_NONSTANDARD=y CONFIG_ROCKETPORT=m CONFIG_CYCLADES=m @@ -2950,7 +2950,7 @@ CONFIG_APPLICOM=m # PCMCIA character devices # CONFIG_RAW_DRIVER=m -CONFIG_MAX_RAW_DEVS=256 +CONFIG_MAX_RAW_DEVS=4096 CONFIG_TCG_TPM=m # CONFIG_TCG_TIS_I2C_ATMEL is not set # CONFIG_TCG_TIS_I2C_INFINEON is not set @@ -5908,12 +5908,12 @@ CONFIG_LOCKUP_DETECTOR=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 +CONFIG_PANIC_TIMEOUT=90 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_SCHED_STACK_END_CHECK=y @@ -5948,7 +5948,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_TORTURE_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 +CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_RCU_CPU_STALL_INFO is not set # CONFIG_RCU_TRACE is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set @@ -6037,10 +6037,10 @@ CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y -CONFIG_LSM_MMAP_MIN_ADDR=65536 +CONFIG_LSM_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y diff --git a/config/armv6hl/default b/config/armv6hl/default index 3d7df34..43f5b7a 100644 --- a/config/armv6hl/default +++ b/config/armv6hl/default @@ -5645,7 +5645,7 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480 CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 +CONFIG_PANIC_TIMEOUT=90 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_SCHED_STACK_END_CHECK=y diff --git a/config/armv6hl/vanilla b/config/armv6hl/vanilla index d87c331..0a773a9 100644 --- a/config/armv6hl/vanilla +++ b/config/armv6hl/vanilla @@ -22,7 +22,7 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_ARM_PATCH_PHYS_VIRT=y CONFIG_GENERIC_BUG=y CONFIG_SUSE_KERNEL=y -CONFIG_SPLIT_PACKAGE=y +# CONFIG_SPLIT_PACKAGE is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y diff --git a/config/armv7hl/default b/config/armv7hl/default index ff55541..bafe55e 100644 --- a/config/armv7hl/default +++ b/config/armv7hl/default @@ -5331,7 +5331,7 @@ CONFIG_SND_HDA=m # CONFIG_SND_HDA_INTEL is not set CONFIG_SND_HDA_TEGRA=m CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_HDA_PREALLOC_SIZE=1024 CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y @@ -7395,7 +7395,7 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480 CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 +CONFIG_PANIC_TIMEOUT=90 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_SCHED_STACK_END_CHECK=y @@ -7429,7 +7429,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_TORTURE_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 +CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_RCU_CPU_STALL_INFO is not set # CONFIG_RCU_TRACE is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set diff --git a/config/armv7hl/lpae b/config/armv7hl/lpae index 20b08c9..05d0bad 100644 --- a/config/armv7hl/lpae +++ b/config/armv7hl/lpae @@ -5072,7 +5072,7 @@ CONFIG_SND_HDA=m # CONFIG_SND_HDA_INTEL is not set CONFIG_SND_HDA_TEGRA=m CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_HDA_PREALLOC_SIZE=1024 CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y @@ -6994,7 +6994,7 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480 CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 +CONFIG_PANIC_TIMEOUT=90 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_SCHED_STACK_END_CHECK=y @@ -7028,7 +7028,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_TORTURE_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 +CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_RCU_CPU_STALL_INFO is not set # CONFIG_RCU_TRACE is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set diff --git a/config/armv7hl/vanilla b/config/armv7hl/vanilla index ba6a1dc..fdfbcf1 100644 --- a/config/armv7hl/vanilla +++ b/config/armv7hl/vanilla @@ -26,7 +26,7 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_ARM_PATCH_PHYS_VIRT=y CONFIG_GENERIC_BUG=y CONFIG_SUSE_KERNEL=y -CONFIG_SPLIT_PACKAGE=y +# CONFIG_SPLIT_PACKAGE is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y @@ -5327,7 +5327,7 @@ CONFIG_SND_HDA=m # CONFIG_SND_HDA_INTEL is not set CONFIG_SND_HDA_TEGRA=m CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_HDA_PREALLOC_SIZE=1024 CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y @@ -7390,7 +7390,7 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480 CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 +CONFIG_PANIC_TIMEOUT=90 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_SCHED_STACK_END_CHECK=y @@ -7424,7 +7424,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_TORTURE_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 +CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_RCU_CPU_STALL_INFO is not set # CONFIG_RCU_TRACE is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -- 2.0.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] optimizing ext4 bytes-per-inode on large arrays installed on opensuse?
by lyndat3＠your-mail.com 02 Apr '15

02 Apr '15

I'm replacing a RAID array for a NAS. I'm about to create a the ext4 partition on the primary, full-disk LV. The original LV had been formatted ext4, with defaults, mkfs.ext4 /dev/VG0/NAS03 I'm looking at the original drive's usage, hoping to optimize the new drive. /bin/df /dev/VG0/NAS03 Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/VG0-NAS03 1548182724 1383153132 86363468 95% /NAS03 /bin/df -i /dev/VG0/NAS03 Filesystem Inodes IUsed IFree IUse% Mounted on /dev/mapper/VG0-NAS03 98312192 1182797 97129395 2% /NAS03 For 1383153132 1K blocks = 1,416,348,807,168 bytes in use results in an effective 'bytes-per-inode' 1,416,348,807,168 / 1182797 = 1,197,457 bytes/inode The ext4 fs defaults for mke2fs on opensuse are cat /etc/mke2fs.conf [defaults] base_features = sparse_super,filetype,resize_inode,dir_index,ext_attr default_mntopts = acl,user_xattr enable_periodic_fsck = 0 blocksize = 4096 inode_size = 256 inode_ratio = 16384 [fs_types] ... ext4 = { features = has_journal,extent,huge_file,flex_bg,uninit_bg,dir_nlink,extra_isize auto_64-bit_support = 1 inode_size = 256 } ... The parameters are documented at https://ext4.wiki.kernel.org/index.php/Frequently_Asked_Questions http://man7.org/linux/man-pages/man5/ext4.5.html Assuming (correct?) that "inode_ratio" == "bytes-per-inode" Comparing the default vs effective ratios 16384 <<< 1,197,457 where the effective ratio for my current usage profile falls between largefile = { inode_ratio = 1048576 blocksize = -1 } & largefile4 = { inode_ratio = 4194304 blocksize = -1 } Assuming that usage over time will be similar for the new LV, and Usage: mkfs.ext4 [-c|-l filename] [-b block-size] [-C cluster-size] [-i bytes-per-inode] [-I inode-size] [-J journal-options] [-G flex-group-size] [-N number-of-inodes] [-m reserved-blocks-percentage] [-o creator-os] [-g blocks-per-group] [-L volume-label] [-M last-mounted-directory] [-O feature[,...]] [-r fs-revision] [-E extended-option[,...]] [-t fs-type] [-T usage-type ] [-U UUID] [-jnqvDFKSV] device [blocks-count] for optimal performance, *should* the new LV fs be created as mkfs.ext4 -T largefile ... ? Might as well get it right before locking it in. LT -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

2 2

[opensuse-kernel] [PATCH 3/3] ARMv6: config: Update and reenable for 4.0-rc6
by Dirk Müller 02 Apr '15

02 Apr '15

--- config.conf | 4 +- config/armv6hl/default | 105 +++++++++++++--- config/armv6hl/vanilla | 324 ++++++++++++++++++++++++++++++------------------- 3 files changed, 284 insertions(+), 149 deletions(-) diff --git a/config.conf b/config.conf index 6592427..cea8c37 100644 --- a/config.conf +++ b/config.conf @@ -36,8 +36,8 @@ +ppc64le ppc64le/vanilla # ARM architectures -#+armv6hl armv6hl/default -#+armv6hl armv6hl/vanilla ++armv6hl armv6hl/default ++armv6hl armv6hl/vanilla +armv7hl armv7hl/default +armv7hl armv7hl/vanilla +armv7hl armv7hl/lpae diff --git a/config/armv6hl/default b/config/armv6hl/default index 732c7c3..3d7df34 100644 --- a/config/armv6hl/default +++ b/config/armv6hl/default @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 3.19.0 Kernel Configuration +# Linux/arm 4.0.0-rc6 Kernel Configuration # CONFIG_ARM=y CONFIG_ARM_HAS_SG_CHAIN=y @@ -102,9 +102,11 @@ CONFIG_TASK_IO_ACCOUNTING=y # RCU Subsystem # CONFIG_TINY_RCU=y +CONFIG_SRCU=y # CONFIG_TASKS_RCU is not set # CONFIG_RCU_STALL_COMMON is not set # CONFIG_TREE_RCU_TRACE is not set +CONFIG_RCU_KTHREAD_PRIO=0 CONFIG_BUILD_BIN2C=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -147,7 +149,6 @@ CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y CONFIG_RD_LZ4=y -CONFIG_INIT_FALLBACK=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -194,6 +195,7 @@ CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y # CONFIG_JUMP_LABEL is not set +CONFIG_OPTPROBES=y # CONFIG_UPROBES is not set # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -201,6 +203,7 @@ CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y @@ -353,8 +356,6 @@ CONFIG_ARCH_BCM=y # # KONA architected SoCs # -# CONFIG_ARCH_BCM_281XX is not set -# CONFIG_ARCH_BCM_21664 is not set # # Other Architectures @@ -474,6 +475,7 @@ CONFIG_ARM_ERRATA_411920=y # Bus support # # CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS_GENERIC is not set # CONFIG_PCI_SYSCALL is not set # CONFIG_PCCARD is not set @@ -534,6 +536,7 @@ CONFIG_ZPOOL=y CONFIG_ZBUD=y CONFIG_ZSMALLOC=y # CONFIG_PGTABLE_MAPPING is not set +# CONFIG_ZSMALLOC_STAT is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_ALIGNMENT_TRAP=y CONFIG_UACCESS_WITH_MEMCPY=y @@ -1152,6 +1155,7 @@ CONFIG_LAPB=m CONFIG_PHONET=m CONFIG_6LOWPAN=m CONFIG_IEEE802154=m +CONFIG_IEEE802154_SOCKET=m CONFIG_IEEE802154_6LOWPAN=m CONFIG_MAC802154=m CONFIG_NET_SCHED=y @@ -1222,6 +1226,8 @@ CONFIG_NET_ACT_SIMP=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m CONFIG_NET_ACT_VLAN=m +CONFIG_NET_ACT_BPF=m +CONFIG_NET_ACT_CONNMARK=m CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y @@ -1379,6 +1385,7 @@ CONFIG_BT_CMTP=m CONFIG_BT_HIDP=m CONFIG_BT_LE=y CONFIG_BT_6LOWPAN=m +# CONFIG_BT_SELFTEST is not set # # Bluetooth device drivers @@ -1639,6 +1646,7 @@ CONFIG_MTD_NAND_TMIO=m # CONFIG_MTD_NAND_NANDSIM is not set CONFIG_MTD_NAND_PLATFORM=m CONFIG_MTD_NAND_MXC=m +# CONFIG_MTD_NAND_HISI504 is not set CONFIG_MTD_ONENAND=m CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=m @@ -1668,12 +1676,15 @@ CONFIG_OF=y # CONFIG_OF_UNITTEST is not set CONFIG_OF_FLATTREE=y CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_ADDRESS=y CONFIG_OF_IRQ=y CONFIG_OF_NET=y CONFIG_OF_MDIO=m CONFIG_OF_MTD=y CONFIG_OF_RESERVED_MEM=y +CONFIG_OF_RESOLVE=y +CONFIG_OF_OVERLAY=y CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y CONFIG_PARPORT=m CONFIG_PARPORT_PC=m @@ -1729,7 +1740,6 @@ CONFIG_BLK_DEV_OSD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_XIP=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_CDROM_PKTCDVD_WCACHE=y @@ -2018,6 +2028,7 @@ CONFIG_NET_VENDOR_FREESCALE=y CONFIG_FEC=m CONFIG_NET_VENDOR_HISILICON=y # CONFIG_HIX5HD2_GMAC is not set +# CONFIG_HIP04_ETH is not set CONFIG_NET_VENDOR_INTEL=y CONFIG_NET_VENDOR_I825XX=y CONFIG_NET_VENDOR_MARVELL=y @@ -2434,6 +2445,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_PS2_SENTELIC=y CONFIG_MOUSE_PS2_TOUCHKIT=y +CONFIG_MOUSE_PS2_FOCALTECH=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_BCM5974=m @@ -2566,6 +2578,7 @@ CONFIG_INPUT_AD714X=m CONFIG_INPUT_AD714X_I2C=m CONFIG_INPUT_AD714X_SPI=m # CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set CONFIG_INPUT_MAX77693_HAPTIC=m CONFIG_INPUT_MAX8925_ONKEY=m # CONFIG_INPUT_MAX8997_HAPTIC is not set @@ -2581,6 +2594,8 @@ CONFIG_INPUT_KXTJ9=m CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m +# CONFIG_INPUT_REGULATOR_HAPTIC is not set +# CONFIG_INPUT_TPS65218_PWRBUTTON is not set CONFIG_INPUT_TWL4030_PWRBUTTON=m CONFIG_INPUT_TWL4030_VIBRA=m CONFIG_INPUT_TWL6040_VIBRA=m @@ -2638,6 +2653,7 @@ CONFIG_N_HDLC=m CONFIG_N_GSM=m CONFIG_TRACE_ROUTER=m CONFIG_TRACE_SINK=m +CONFIG_DEVMEM=y CONFIG_DEVKMEM=y # @@ -2674,6 +2690,7 @@ CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 CONFIG_SERIAL_XILINX_PS_UART=m # CONFIG_SERIAL_ARC is not set CONFIG_SERIAL_FSL_LPUART=m +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set CONFIG_SERIAL_ST_ASC=m # CONFIG_TTY_PRINTK is not set CONFIG_PRINTER=m @@ -2705,7 +2722,7 @@ CONFIG_TCG_TPM=m CONFIG_TCG_TIS_I2C_ATMEL=m CONFIG_TCG_TIS_I2C_INFINEON=m CONFIG_TCG_TIS_I2C_NUVOTON=m -CONFIG_TCG_ST33_I2C=m +CONFIG_TCG_TIS_I2C_ST33=m CONFIG_CRASHER=m CONFIG_XILLYBUS=m CONFIG_XILLYBUS_OF=m @@ -2786,6 +2803,7 @@ CONFIG_SPI_BCM2835=m CONFIG_SPI_BITBANG=m # CONFIG_SPI_BUTTERFLY is not set # CONFIG_SPI_CADENCE is not set +CONFIG_SPI_DLN2=m CONFIG_SPI_GPIO=m CONFIG_SPI_IMX=m # CONFIG_SPI_LM70_LLP is not set @@ -2998,6 +3016,7 @@ CONFIG_CHARGER_LP8727=m CONFIG_CHARGER_LP8788=m CONFIG_CHARGER_GPIO=m # CONFIG_CHARGER_MANAGER is not set +CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_MAX8997=m CONFIG_CHARGER_MAX8998=m # CONFIG_CHARGER_BQ2415X is not set @@ -3005,6 +3024,8 @@ CONFIG_CHARGER_BQ24190=m CONFIG_CHARGER_BQ24735=m CONFIG_CHARGER_SMB347=m # CONFIG_CHARGER_TPS65090 is not set +CONFIG_BATTERY_GAUGE_LTC2941=m +# CONFIG_BATTERY_RT5033 is not set CONFIG_POWER_RESET=y # CONFIG_POWER_RESET_AS3722 is not set # CONFIG_POWER_RESET_BRCMSTB is not set @@ -3248,6 +3269,7 @@ CONFIG_PMIC_DA9052=y CONFIG_MFD_DA9052_I2C=y CONFIG_MFD_DA9055=y CONFIG_MFD_DA9063=y +CONFIG_MFD_DA9150=m CONFIG_MFD_DLN2=m # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set @@ -3274,6 +3296,7 @@ CONFIG_MFD_VIPERBOARD=m # CONFIG_MFD_PCF50633 is not set CONFIG_UCB1400_CORE=m # CONFIG_MFD_PM8921_CORE is not set +CONFIG_MFD_RT5033=m CONFIG_MFD_RTSX_USB=m CONFIG_MFD_RC5T583=y # CONFIG_MFD_RK808 is not set @@ -3379,6 +3402,7 @@ CONFIG_REGULATOR_PALMAS=m CONFIG_REGULATOR_PFUZE100=m CONFIG_REGULATOR_PWM=m CONFIG_REGULATOR_RC5T583=m +CONFIG_REGULATOR_RT5033=m # CONFIG_REGULATOR_S2MPA01 is not set CONFIG_REGULATOR_S2MPS11=m CONFIG_REGULATOR_S5M8767=m @@ -3513,6 +3537,7 @@ CONFIG_USB_GSPCA_STV0680=m CONFIG_USB_GSPCA_SUNPLUS=m CONFIG_USB_GSPCA_T613=m CONFIG_USB_GSPCA_TOPRO=m +CONFIG_USB_GSPCA_TOUPTEK=m CONFIG_USB_GSPCA_TV8532=m CONFIG_USB_GSPCA_VC032X=m CONFIG_USB_GSPCA_VICAM=m @@ -3925,6 +3950,14 @@ CONFIG_DRM_PTN3460=m CONFIG_DRM_UDL=m CONFIG_DRM_ARMADA=m CONFIG_DRM_TILCDC=y +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +# CONFIG_DRM_PANEL_SIMPLE is not set +# CONFIG_DRM_PANEL_LD9040 is not set +# CONFIG_DRM_PANEL_S6E8AA0 is not set # CONFIG_DRM_STI is not set # @@ -4087,6 +4120,11 @@ CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_USB_6FIRE=m CONFIG_SND_USB_HIFACE=m CONFIG_SND_BCD2000=m +CONFIG_SND_USB_LINE6=m +CONFIG_SND_USB_POD=m +CONFIG_SND_USB_PODHD=m +CONFIG_SND_USB_TONEPORT=m +CONFIG_SND_USB_VARIAX=m # CONFIG_SND_SOC is not set CONFIG_SOUND_PRIME=m CONFIG_AC97_BUS=m @@ -4110,6 +4148,7 @@ CONFIG_HID_APPLE=y # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set CONFIG_HID_BELKIN=y +# CONFIG_HID_BETOP_FF is not set CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_PRODIKEYS=m @@ -4238,7 +4277,6 @@ CONFIG_USB_EHCI_MXC=m CONFIG_USB_EHCI_HCD_PLATFORM=m CONFIG_USB_OXU210HP_HCD=m CONFIG_USB_ISP116X_HCD=m -CONFIG_USB_ISP1760_HCD=m CONFIG_USB_ISP1362_HCD=m CONFIG_USB_FUSBH200_HCD=m CONFIG_USB_FOTG210_HCD=m @@ -4313,6 +4351,7 @@ CONFIG_USB_DWC2_PLATFORM=m # CONFIG_USB_DWC2_DEBUG is not set # CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set # CONFIG_USB_CHIPIDEA is not set +# CONFIG_USB_ISP1760 is not set # # USB port drivers @@ -4493,9 +4532,8 @@ CONFIG_MMC_SDHCI_PLTFM=m # CONFIG_MMC_SDHCI_OF_ARASAN is not set # CONFIG_MMC_SDHCI_CNS3XXX is not set CONFIG_MMC_SDHCI_ESDHC_IMX=m -CONFIG_MMC_SDHCI_PXAV3=m -CONFIG_MMC_SDHCI_PXAV2=m CONFIG_MMC_SDHCI_BCM2835=m +# CONFIG_MMC_SDHCI_F_SDH30 is not set CONFIG_MMC_MXC=m CONFIG_MMC_TMIO_CORE=m CONFIG_MMC_TMIO=m @@ -4522,6 +4560,7 @@ CONFIG_MS_BLOCK=m CONFIG_LEDS_GPIO_REGISTER=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set # # LED drivers @@ -4603,6 +4642,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_88PM860X=y CONFIG_RTC_DRV_88PM80X=y +# CONFIG_RTC_DRV_ABB5ZES3 is not set CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y @@ -4669,6 +4709,7 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1685_FAMILY is not set CONFIG_RTC_DRV_DS1742=y # CONFIG_RTC_DRV_DS2404 is not set CONFIG_RTC_DRV_DA9052=y @@ -4763,7 +4804,6 @@ CONFIG_88EU_AP_MODE=y CONFIG_R8723AU=m CONFIG_8723AU_AP_MODE=y CONFIG_8723AU_BT_COEXIST=y -# CONFIG_LINE6_USB is not set CONFIG_VT6656=m # @@ -4881,18 +4921,11 @@ CONFIG_SPEAKUP_SYNTH_SOFT=m CONFIG_SPEAKUP_SYNTH_SPKOUT=m CONFIG_SPEAKUP_SYNTH_TXPRT=m CONFIG_SPEAKUP_SYNTH_DUMMY=m -CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m CONFIG_STAGING_MEDIA=y CONFIG_I2C_BCM2048=m -CONFIG_VIDEO_TLG2300=m CONFIG_DVB_MN88472=m CONFIG_DVB_MN88473=m -CONFIG_MEDIA_PARPORT_SUPPORT=y -CONFIG_VIDEO_BWQCAM=m -CONFIG_VIDEO_CQCAM=m -CONFIG_VIDEO_W9966=m -# CONFIG_VIDEO_SAA7191 is not set # CONFIG_LIRC_STAGING is not set # @@ -4913,6 +4946,7 @@ CONFIG_LNET_MAX_PAYLOAD=1048576 CONFIG_DGAP=m # CONFIG_GS_FPGABOOT is not set # CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set +# CONFIG_FB_TFT is not set CONFIG_CLKDEV_LOOKUP=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y @@ -4928,8 +4962,10 @@ CONFIG_COMMON_CLK_MAX77686=m # CONFIG_COMMON_CLK_SI570 is not set CONFIG_COMMON_CLK_S2MPS11=m CONFIG_CLK_TWL6040=m +# CONFIG_CLK_QORIQ is not set # CONFIG_COMMON_CLK_PALMAS is not set # CONFIG_COMMON_CLK_PXA is not set +# CONFIG_COMMON_CLK_CDCE706 is not set # CONFIG_COMMON_CLK_QCOM is not set # @@ -4952,9 +4988,16 @@ CONFIG_VT8500_TIMER=y # CONFIG_CLKSRC_VERSATILE is not set CONFIG_MAILBOX=y CONFIG_PL320_MBOX=y +# CONFIG_ALTERA_MBOX is not set CONFIG_IOMMU_SUPPORT=y # +# Generic IOMMU Pagetable Support +# +# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set +# CONFIG_ARM_SMMU is not set + +# # Remoteproc drivers # # CONFIG_STE_MODEM_RPROC is not set @@ -4980,6 +5023,7 @@ CONFIG_DEVFREQ_GOV_USERSPACE=m # # DEVFREQ Drivers # +CONFIG_PM_DEVFREQ_EVENT=y # CONFIG_EXTCON is not set # CONFIG_MEMORY is not set CONFIG_IIO=m @@ -5002,6 +5046,8 @@ CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m CONFIG_KXSD9=m CONFIG_MMA8452=m CONFIG_KXCJK1013=m +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set # # Analog to digital converters @@ -5016,6 +5062,7 @@ CONFIG_AD7793=m CONFIG_AD7887=m CONFIG_AD7923=m CONFIG_AD799X=m +# CONFIG_CC10001_ADC is not set CONFIG_LP8788_ADC=m CONFIG_MAX1027=m CONFIG_MAX1363=m @@ -5040,6 +5087,11 @@ CONFIG_AD8366=m # CONFIG_HID_SENSOR_IIO_COMMON=m CONFIG_HID_SENSOR_IIO_TRIGGER=m + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORHUB is not set CONFIG_IIO_ST_SENSORS_I2C=m CONFIG_IIO_ST_SENSORS_SPI=m CONFIG_IIO_ST_SENSORS_CORE=m @@ -5106,6 +5158,7 @@ CONFIG_SI7020=m # CONFIG_ADIS16400=m CONFIG_ADIS16480=m +# CONFIG_KMX61 is not set CONFIG_INV_MPU6050_IIO=m CONFIG_IIO_ADIS_LIB=m CONFIG_IIO_ADIS_LIB_BUFFER=y @@ -5117,11 +5170,13 @@ CONFIG_ADJD_S311=m CONFIG_AL3320A=m CONFIG_APDS9300=m CONFIG_CM32181=m +CONFIG_CM3232=m CONFIG_CM36651=m CONFIG_GP2AP020A00F=m CONFIG_ISL29125=m CONFIG_HID_SENSOR_ALS=m CONFIG_HID_SENSOR_PROX=m +CONFIG_JSA1212=m CONFIG_LTR501=m CONFIG_TCS3414=m CONFIG_TCS3472=m @@ -5170,6 +5225,11 @@ CONFIG_T5403=m CONFIG_AS3935=m # +# Proximity sensors +# +# CONFIG_SX9500 is not set + +# # Temperature sensors # CONFIG_MLX90614=m @@ -5382,6 +5442,7 @@ CONFIG_ROMFS_ON_BLOCK=y CONFIG_ROMFS_ON_MTD=y CONFIG_PSTORE=y # CONFIG_PSTORE_CONSOLE is not set +# CONFIG_PSTORE_PMSG is not set # CONFIG_PSTORE_FTRACE is not set # CONFIG_PSTORE_RAM is not set CONFIG_SYSV_FS=m @@ -5396,6 +5457,7 @@ CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_FS_SECURITY=y # CONFIG_F2FS_CHECK_FS is not set +# CONFIG_F2FS_IO_TRACE is not set CONFIG_ORE=m CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m @@ -5409,6 +5471,7 @@ CONFIG_NFS_V4_2=y CONFIG_PNFS_FILE_LAYOUT=m CONFIG_PNFS_BLOCK=m CONFIG_PNFS_OBJLAYOUT=m +CONFIG_PNFS_FLEXFILE_LAYOUT=m CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" # CONFIG_NFS_V4_1_MIGRATION is not set CONFIG_NFS_V4_SECURITY_LABEL=y @@ -5421,6 +5484,7 @@ CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y +CONFIG_NFSD_PNFS=y CONFIG_NFSD_V4_SECURITY_LABEL=y # CONFIG_NFSD_FAULT_INJECTION is not set CONFIG_GRACE_PERIOD=m @@ -5539,6 +5603,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_INFO_REDUCED is not set # CONFIG_DEBUG_INFO_SPLIT is not set CONFIG_DEBUG_INFO_DWARF4=y +# CONFIG_GDB_SCRIPTS is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 @@ -5618,6 +5683,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set CONFIG_NOTIFIER_ERROR_INJECTION=m CONFIG_PM_NOTIFIER_ERROR_INJECT=m +# CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y @@ -5672,6 +5738,7 @@ CONFIG_INTERVAL_TREE_TEST=m # CONFIG_PERCPU_TEST is not set # CONFIG_ATOMIC64_SELFTEST is not set CONFIG_ASYNC_RAID6_TEST=m +# CONFIG_TEST_HEXDUMP is not set # CONFIG_TEST_STRING_HELPERS is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_TEST_RHASHTABLE is not set @@ -5698,7 +5765,6 @@ CONFIG_DEBUG_USER=y # CONFIG_DEBUG_LL is not set CONFIG_DEBUG_IMX_UART_PORT=1 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -# CONFIG_DEBUG_UART_PL01X is not set # CONFIG_DEBUG_UART_8250 is not set # CONFIG_DEBUG_UART_BCM63XX is not set CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" @@ -5715,7 +5781,6 @@ CONFIG_PERSISTENT_KEYRINGS=y CONFIG_BIG_KEYS=y CONFIG_TRUSTED_KEYS=m CONFIG_ENCRYPTED_KEYS=m -# CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y @@ -5879,6 +5944,7 @@ CONFIG_CRYPTO_DRBG=m CONFIG_CRYPTO_USER_API=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_HASH_INFO=y CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_PICOXCELL is not set @@ -5896,6 +5962,7 @@ CONFIG_BINARY_PRINTF=y # CONFIG_RAID6_PQ=m CONFIG_BITREVERSE=y +# CONFIG_HAVE_ARCH_BITREVERSE is not set CONFIG_RATIONAL=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y diff --git a/config/armv6hl/vanilla b/config/armv6hl/vanilla index 408a22c..d87c331 100644 --- a/config/armv6hl/vanilla +++ b/config/armv6hl/vanilla @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 3.19.0 Kernel Configuration +# Linux/arm 4.0.0-rc6 Kernel Configuration # CONFIG_ARM=y CONFIG_ARM_HAS_SG_CHAIN=y @@ -22,7 +22,7 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_ARM_PATCH_PHYS_VIRT=y CONFIG_GENERIC_BUG=y CONFIG_SUSE_KERNEL=y -# CONFIG_SPLIT_PACKAGE is not set +CONFIG_SPLIT_PACKAGE=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y @@ -100,9 +100,11 @@ CONFIG_TASK_IO_ACCOUNTING=y # RCU Subsystem # CONFIG_TINY_RCU=y +CONFIG_SRCU=y # CONFIG_TASKS_RCU is not set # CONFIG_RCU_STALL_COMMON is not set # CONFIG_TREE_RCU_TRACE is not set +CONFIG_RCU_KTHREAD_PRIO=0 CONFIG_BUILD_BIN2C=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -145,7 +147,6 @@ CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y CONFIG_RD_LZ4=y -CONFIG_INIT_FALLBACK=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -192,6 +193,7 @@ CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y # CONFIG_JUMP_LABEL is not set +CONFIG_OPTPROBES=y # CONFIG_UPROBES is not set # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -199,6 +201,7 @@ CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y @@ -351,8 +354,6 @@ CONFIG_ARCH_BCM=y # # KONA architected SoCs # -# CONFIG_ARCH_BCM_281XX is not set -# CONFIG_ARCH_BCM_21664 is not set # # Other Architectures @@ -472,6 +473,7 @@ CONFIG_ARM_ERRATA_411920=y # Bus support # # CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS_GENERIC is not set # CONFIG_PCI_SYSCALL is not set # CONFIG_PCCARD is not set @@ -532,6 +534,7 @@ CONFIG_ZPOOL=y CONFIG_ZBUD=y CONFIG_ZSMALLOC=y # CONFIG_PGTABLE_MAPPING is not set +# CONFIG_ZSMALLOC_STAT is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_ALIGNMENT_TRAP=y CONFIG_UACCESS_WITH_MEMCPY=y @@ -806,7 +809,7 @@ CONFIG_NF_NAT_TFTP=m CONFIG_NF_NAT_REDIRECT=m CONFIG_NETFILTER_SYNPROXY=m CONFIG_NF_TABLES=m -# CONFIG_NF_TABLES_INET is not set +CONFIG_NF_TABLES_INET=m CONFIG_NFT_EXTHDR=m CONFIG_NFT_META=m CONFIG_NFT_CT=m @@ -816,10 +819,11 @@ CONFIG_NFT_COUNTER=m CONFIG_NFT_LOG=m CONFIG_NFT_LIMIT=m CONFIG_NFT_MASQ=m -# CONFIG_NFT_REDIR is not set +CONFIG_NFT_REDIR=m CONFIG_NFT_NAT=m -# CONFIG_NFT_QUEUE is not set -# CONFIG_NFT_REJECT is not set +CONFIG_NFT_QUEUE=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_REJECT_INET=m CONFIG_NFT_COMPAT=m CONFIG_NETFILTER_XTABLES=m @@ -979,12 +983,13 @@ CONFIG_NF_LOG_IPV4=m CONFIG_NF_TABLES_IPV4=m CONFIG_NFT_CHAIN_ROUTE_IPV4=m CONFIG_NF_REJECT_IPV4=m -# CONFIG_NFT_REJECT_IPV4 is not set +CONFIG_NFT_REJECT_IPV4=m CONFIG_NF_TABLES_ARP=m CONFIG_NF_NAT_IPV4=m CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_NF_NAT_MASQUERADE_IPV4=m CONFIG_NFT_MASQ_IPV4=m +CONFIG_NFT_REDIR_IPV4=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PPTP=m @@ -1019,12 +1024,13 @@ CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=m CONFIG_NFT_CHAIN_ROUTE_IPV6=m CONFIG_NF_REJECT_IPV6=m -# CONFIG_NFT_REJECT_IPV6 is not set +CONFIG_NFT_REJECT_IPV6=m CONFIG_NF_LOG_IPV6=m CONFIG_NF_NAT_IPV6=m CONFIG_NFT_CHAIN_NAT_IPV6=m CONFIG_NF_NAT_MASQUERADE_IPV6=m CONFIG_NFT_MASQ_IPV6=m +CONFIG_NFT_REDIR_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -1052,6 +1058,7 @@ CONFIG_IP6_NF_TARGET_NPT=m # CONFIG_DECNET_NF_GRABULATOR is not set CONFIG_NF_TABLES_BRIDGE=m CONFIG_NFT_BRIDGE_META=m +CONFIG_NFT_BRIDGE_REJECT=m CONFIG_NF_LOG_BRIDGE=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m @@ -1145,6 +1152,7 @@ CONFIG_LAPB=m CONFIG_PHONET=m CONFIG_6LOWPAN=m CONFIG_IEEE802154=m +CONFIG_IEEE802154_SOCKET=m CONFIG_IEEE802154_6LOWPAN=m CONFIG_MAC802154=m CONFIG_NET_SCHED=y @@ -1214,7 +1222,9 @@ CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m -# CONFIG_NET_ACT_VLAN is not set +CONFIG_NET_ACT_VLAN=m +CONFIG_NET_ACT_BPF=m +CONFIG_NET_ACT_CONNMARK=m CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y @@ -1372,6 +1382,7 @@ CONFIG_BT_CMTP=m CONFIG_BT_HIDP=m CONFIG_BT_LE=y CONFIG_BT_6LOWPAN=m +# CONFIG_BT_SELFTEST is not set # # Bluetooth device drivers @@ -1420,7 +1431,7 @@ CONFIG_MAC80211=m CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL_HT=y -# CONFIG_MAC80211_RC_MINSTREL_VHT is not set +CONFIG_MAC80211_RC_MINSTREL_VHT=y CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" CONFIG_MAC80211_MESH=y @@ -1632,6 +1643,7 @@ CONFIG_MTD_NAND_TMIO=m # CONFIG_MTD_NAND_NANDSIM is not set CONFIG_MTD_NAND_PLATFORM=m CONFIG_MTD_NAND_MXC=m +# CONFIG_MTD_NAND_HISI504 is not set CONFIG_MTD_ONENAND=m CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=m @@ -1661,12 +1673,15 @@ CONFIG_OF=y # CONFIG_OF_UNITTEST is not set CONFIG_OF_FLATTREE=y CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_ADDRESS=y CONFIG_OF_IRQ=y CONFIG_OF_NET=y CONFIG_OF_MDIO=m CONFIG_OF_MTD=y CONFIG_OF_RESERVED_MEM=y +CONFIG_OF_RESOLVE=y +CONFIG_OF_OVERLAY=y CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y CONFIG_PARPORT=m CONFIG_PARPORT_PC=m @@ -1722,7 +1737,6 @@ CONFIG_BLK_DEV_OSD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_XIP=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_CDROM_PKTCDVD_WCACHE=y @@ -1948,7 +1962,7 @@ CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m # CONFIG_NET_TEAM_MODE_LOADBALANCE is not set CONFIG_MACVLAN=m CONFIG_MACVTAP=m -# CONFIG_IPVLAN is not set +CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y @@ -1984,7 +1998,7 @@ CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y CONFIG_NET_DSA_MV88E6131=m CONFIG_NET_DSA_MV88E6123_61_65=m CONFIG_NET_DSA_MV88E6171=m -# CONFIG_NET_DSA_MV88E6352 is not set +CONFIG_NET_DSA_MV88E6352=m CONFIG_NET_DSA_BCM_SF2=m CONFIG_ETHERNET=y # CONFIG_ALTERA_TSE is not set @@ -2011,6 +2025,7 @@ CONFIG_NET_VENDOR_FREESCALE=y CONFIG_FEC=m CONFIG_NET_VENDOR_HISILICON=y # CONFIG_HIX5HD2_GMAC is not set +# CONFIG_HIP04_ETH is not set CONFIG_NET_VENDOR_INTEL=y CONFIG_NET_VENDOR_I825XX=y CONFIG_NET_VENDOR_MARVELL=y @@ -2097,10 +2112,6 @@ CONFIG_SLHC=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y - -# -# Host-side USB support is needed for USB Network Adapter support -# CONFIG_USB_NET_DRIVERS=m CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m @@ -2165,7 +2176,7 @@ CONFIG_ATH9K=m # CONFIG_ATH9K_WOW is not set CONFIG_ATH9K_RFKILL=y CONFIG_ATH9K_CHANNEL_CONTEXT=y -CONFIG_ATH9K_PCOEM=y +# CONFIG_ATH9K_PCOEM is not set CONFIG_ATH9K_HTC=m # CONFIG_ATH9K_HTC_DEBUGFS is not set CONFIG_CARL9170=m @@ -2431,11 +2442,14 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_PS2_SENTELIC=y CONFIG_MOUSE_PS2_TOUCHKIT=y +CONFIG_MOUSE_PS2_FOCALTECH=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_BCM5974=m CONFIG_MOUSE_CYAPA=m -# CONFIG_MOUSE_ELAN_I2C is not set +CONFIG_MOUSE_ELAN_I2C=m +CONFIG_MOUSE_ELAN_I2C_I2C=y +# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set CONFIG_MOUSE_VSXXXAA=m CONFIG_MOUSE_GPIO=m CONFIG_MOUSE_SYNAPTICS_I2C=m @@ -2504,7 +2518,7 @@ CONFIG_TOUCHSCREEN_HAMPSHIRE=m CONFIG_TOUCHSCREEN_FUJITSU=m CONFIG_TOUCHSCREEN_ILI210X=m CONFIG_TOUCHSCREEN_GUNZE=m -# CONFIG_TOUCHSCREEN_ELAN is not set +CONFIG_TOUCHSCREEN_ELAN=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_WACOM_W8001=m # CONFIG_TOUCHSCREEN_WACOM_I2C is not set @@ -2561,6 +2575,7 @@ CONFIG_INPUT_AD714X=m CONFIG_INPUT_AD714X_I2C=m CONFIG_INPUT_AD714X_SPI=m # CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set CONFIG_INPUT_MAX77693_HAPTIC=m CONFIG_INPUT_MAX8925_ONKEY=m # CONFIG_INPUT_MAX8997_HAPTIC is not set @@ -2576,6 +2591,8 @@ CONFIG_INPUT_KXTJ9=m CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m +# CONFIG_INPUT_REGULATOR_HAPTIC is not set +# CONFIG_INPUT_TPS65218_PWRBUTTON is not set CONFIG_INPUT_TWL4030_PWRBUTTON=m CONFIG_INPUT_TWL4030_VIBRA=m CONFIG_INPUT_TWL6040_VIBRA=m @@ -2633,26 +2650,19 @@ CONFIG_N_HDLC=m CONFIG_N_GSM=m CONFIG_TRACE_ROUTER=m CONFIG_TRACE_SINK=m +CONFIG_DEVMEM=y CONFIG_DEVKMEM=y # # Serial drivers # CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=32 -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SERIAL_8250_DW is not set -# CONFIG_SERIAL_8250_EM is not set +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AMBA_PL010=m +# CONFIG_SERIAL_AMBA_PL010 is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y # CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set @@ -2666,7 +2676,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_CONSOLE_POLL=y CONFIG_SERIAL_VT8500=y CONFIG_SERIAL_VT8500_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=m # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_SC16IS7XX is not set # CONFIG_SERIAL_BCM63XX is not set @@ -2678,6 +2687,7 @@ CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 CONFIG_SERIAL_XILINX_PS_UART=m # CONFIG_SERIAL_ARC is not set CONFIG_SERIAL_FSL_LPUART=m +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set CONFIG_SERIAL_ST_ASC=m # CONFIG_TTY_PRINTK is not set CONFIG_PRINTER=m @@ -2709,7 +2719,7 @@ CONFIG_TCG_TPM=m CONFIG_TCG_TIS_I2C_ATMEL=m CONFIG_TCG_TIS_I2C_INFINEON=m CONFIG_TCG_TIS_I2C_NUVOTON=m -CONFIG_TCG_ST33_I2C=m +CONFIG_TCG_TIS_I2C_ST33=m CONFIG_XILLYBUS=m CONFIG_XILLYBUS_OF=m @@ -2760,6 +2770,7 @@ CONFIG_I2C_WMT=m # External I2C/SMBus adapter drivers # CONFIG_I2C_DIOLAN_U2C=m +CONFIG_I2C_DLN2=m CONFIG_I2C_PARPORT=m CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_ROBOTFUZZ_OSIF=m @@ -2788,6 +2799,7 @@ CONFIG_SPI_BCM2835=m CONFIG_SPI_BITBANG=m # CONFIG_SPI_BUTTERFLY is not set # CONFIG_SPI_CADENCE is not set +CONFIG_SPI_DLN2=m CONFIG_SPI_GPIO=m CONFIG_SPI_IMX=m # CONFIG_SPI_LM70_LLP is not set @@ -2850,7 +2862,8 @@ CONFIG_PINCTRL_BCM2835=y # CONFIG_PINCTRL_PALMAS is not set CONFIG_PINCTRL_IMX=y CONFIG_PINCTRL_IMX35=y -# CONFIG_PINCTRL_WM8750 is not set +CONFIG_PINCTRL_WMT=y +CONFIG_PINCTRL_WM8750=y CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y @@ -2889,7 +2902,7 @@ CONFIG_GPIO_MAX732X=m CONFIG_GPIO_PCA953X=m CONFIG_GPIO_PCF857X=m CONFIG_GPIO_RC5T583=y -# CONFIG_GPIO_SX150X is not set +CONFIG_GPIO_SX150X=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y CONFIG_GPIO_TPS65912=m @@ -2909,10 +2922,10 @@ CONFIG_GPIO_ADNP=m # # SPI GPIO expanders: # -# CONFIG_GPIO_MAX7301 is not set +CONFIG_GPIO_MAX7301=m CONFIG_GPIO_MCP23S08=m -# CONFIG_GPIO_MC33880 is not set -# CONFIG_GPIO_74X164 is not set +CONFIG_GPIO_MC33880=m +CONFIG_GPIO_74X164=m # # AC97 GPIO expanders: @@ -2935,6 +2948,7 @@ CONFIG_GPIO_TPS65910=y # USB GPIO expanders: # CONFIG_GPIO_VIPERBOARD=m +CONFIG_GPIO_DLN2=m CONFIG_W1=m CONFIG_W1_CON=y @@ -2998,6 +3012,7 @@ CONFIG_CHARGER_LP8727=m CONFIG_CHARGER_LP8788=m CONFIG_CHARGER_GPIO=m # CONFIG_CHARGER_MANAGER is not set +CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_MAX8997=m CONFIG_CHARGER_MAX8998=m # CONFIG_CHARGER_BQ2415X is not set @@ -3005,6 +3020,8 @@ CONFIG_CHARGER_BQ24190=m CONFIG_CHARGER_BQ24735=m CONFIG_CHARGER_SMB347=m # CONFIG_CHARGER_TPS65090 is not set +CONFIG_BATTERY_GAUGE_LTC2941=m +# CONFIG_BATTERY_RT5033 is not set CONFIG_POWER_RESET=y # CONFIG_POWER_RESET_AS3722 is not set # CONFIG_POWER_RESET_BRCMSTB is not set @@ -3012,7 +3029,7 @@ CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_GPIO_RESTART=y # CONFIG_POWER_RESET_LTC2952 is not set CONFIG_POWER_RESET_RESTART=y -# CONFIG_POWER_RESET_VERSATILE is not set +CONFIG_POWER_RESET_VERSATILE=y CONFIG_POWER_RESET_VEXPRESS=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_AVS=y @@ -3023,7 +3040,7 @@ CONFIG_HWMON_VID=m # # Native drivers # -# CONFIG_SENSORS_AD7314 is not set +CONFIG_SENSORS_AD7314=m CONFIG_SENSORS_AD7414=m CONFIG_SENSORS_AD7418=m CONFIG_SENSORS_ADM1021=m @@ -3033,7 +3050,7 @@ CONFIG_SENSORS_ADM1029=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=m CONFIG_SENSORS_ADT7X10=m -# CONFIG_SENSORS_ADT7310 is not set +CONFIG_SENSORS_ADT7310=m CONFIG_SENSORS_ADT7410=m CONFIG_SENSORS_ADT7411=m CONFIG_SENSORS_ADT7462=m @@ -3056,7 +3073,7 @@ CONFIG_SENSORS_GPIO_FAN=m CONFIG_SENSORS_HIH6130=m CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m -# CONFIG_SENSORS_IIO_HWMON is not set +CONFIG_SENSORS_IIO_HWMON=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_JC42=m CONFIG_SENSORS_POWR1220=m @@ -3068,20 +3085,20 @@ CONFIG_SENSORS_LTC4222=m CONFIG_SENSORS_LTC4245=m CONFIG_SENSORS_LTC4260=m CONFIG_SENSORS_LTC4261=m -# CONFIG_SENSORS_MAX1111 is not set +CONFIG_SENSORS_MAX1111=m CONFIG_SENSORS_MAX16065=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX1668=m -# CONFIG_SENSORS_MAX197 is not set +CONFIG_SENSORS_MAX197=m CONFIG_SENSORS_MAX6639=m CONFIG_SENSORS_MAX6642=m CONFIG_SENSORS_MAX6650=m CONFIG_SENSORS_MAX6697=m CONFIG_SENSORS_HTU21=m CONFIG_SENSORS_MCP3021=m -# CONFIG_SENSORS_ADCXX is not set +CONFIG_SENSORS_ADCXX=m CONFIG_SENSORS_LM63=m -# CONFIG_SENSORS_LM70 is not set +CONFIG_SENSORS_LM70=m CONFIG_SENSORS_LM73=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m @@ -3093,28 +3110,29 @@ CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_LM93=m -# CONFIG_SENSORS_LM95234 is not set +CONFIG_SENSORS_LM95234=m CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_SENSORS_NCT6683=m -# CONFIG_SENSORS_NCT6775 is not set -# CONFIG_SENSORS_NCT7802 is not set +CONFIG_SENSORS_NCT6775=m +CONFIG_SENSORS_NCT7802=m CONFIG_SENSORS_PCF8591=m CONFIG_PMBUS=m CONFIG_SENSORS_PMBUS=m CONFIG_SENSORS_ADM1275=m CONFIG_SENSORS_LM25066=m -# CONFIG_SENSORS_LTC2978 is not set +CONFIG_SENSORS_LTC2978=m +CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_SENSORS_MAX16064=m CONFIG_SENSORS_MAX34440=m CONFIG_SENSORS_MAX8688=m CONFIG_SENSORS_TPS40422=m CONFIG_SENSORS_UCD9000=m CONFIG_SENSORS_UCD9200=m -# CONFIG_SENSORS_ZL6100 is not set +CONFIG_SENSORS_ZL6100=m CONFIG_SENSORS_PWM_FAN=m CONFIG_SENSORS_SHT15=m CONFIG_SENSORS_SHT21=m @@ -3133,10 +3151,10 @@ CONFIG_SENSORS_SMM665=m CONFIG_SENSORS_ADC128D818=m CONFIG_SENSORS_ADS1015=m CONFIG_SENSORS_ADS7828=m -# CONFIG_SENSORS_ADS7871 is not set +CONFIG_SENSORS_ADS7871=m CONFIG_SENSORS_AMC6821=m CONFIG_SENSORS_INA209=m -# CONFIG_SENSORS_INA2XX is not set +CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_THMC50=m CONFIG_SENSORS_TMP102=m CONFIG_SENSORS_TMP103=m @@ -3168,7 +3186,7 @@ CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_CPU_THERMAL=y -# CONFIG_CLOCK_THERMAL is not set +CONFIG_CLOCK_THERMAL=y CONFIG_THERMAL_EMULATION=y CONFIG_IMX_THERMAL=m @@ -3186,7 +3204,7 @@ CONFIG_SOFT_WATCHDOG=m CONFIG_DA9052_WATCHDOG=m CONFIG_DA9055_WATCHDOG=m CONFIG_DA9063_WATCHDOG=m -# CONFIG_GPIO_WATCHDOG is not set +CONFIG_GPIO_WATCHDOG=m CONFIG_WM831X_WATCHDOG=m CONFIG_WM8350_WATCHDOG=m # CONFIG_XILINX_WATCHDOG is not set @@ -3235,7 +3253,7 @@ CONFIG_MFD_AS3722=y CONFIG_PMIC_ADP5520=y CONFIG_MFD_AAT2870_CORE=y # CONFIG_MFD_ATMEL_HLCDC is not set -# CONFIG_MFD_BCM590XX is not set +CONFIG_MFD_BCM590XX=m # CONFIG_MFD_AXP20X is not set CONFIG_MFD_CROS_EC=m CONFIG_MFD_CROS_EC_I2C=m @@ -3247,7 +3265,8 @@ CONFIG_PMIC_DA9052=y CONFIG_MFD_DA9052_I2C=y CONFIG_MFD_DA9055=y CONFIG_MFD_DA9063=y -# CONFIG_MFD_DLN2 is not set +CONFIG_MFD_DA9150=m +CONFIG_MFD_DLN2=m # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_MFD_HI6421_PMIC is not set @@ -3273,6 +3292,7 @@ CONFIG_MFD_VIPERBOARD=m # CONFIG_MFD_PCF50633 is not set CONFIG_UCB1400_CORE=m # CONFIG_MFD_PM8921_CORE is not set +CONFIG_MFD_RT5033=m CONFIG_MFD_RTSX_USB=m CONFIG_MFD_RC5T583=y # CONFIG_MFD_RK808 is not set @@ -3345,6 +3365,7 @@ CONFIG_REGULATOR_ANATOP=m CONFIG_REGULATOR_AAT2870=m CONFIG_REGULATOR_AS3711=m CONFIG_REGULATOR_AS3722=m +CONFIG_REGULATOR_BCM590XX=m CONFIG_REGULATOR_DA903X=m CONFIG_REGULATOR_DA9052=m CONFIG_REGULATOR_DA9055=m @@ -3377,6 +3398,7 @@ CONFIG_REGULATOR_PALMAS=m CONFIG_REGULATOR_PFUZE100=m CONFIG_REGULATOR_PWM=m CONFIG_REGULATOR_RC5T583=m +CONFIG_REGULATOR_RT5033=m # CONFIG_REGULATOR_S2MPA01 is not set CONFIG_REGULATOR_S2MPS11=m CONFIG_REGULATOR_S5M8767=m @@ -3455,7 +3477,7 @@ CONFIG_IR_IMON=m CONFIG_IR_MCEUSB=m CONFIG_IR_REDRAT3=m CONFIG_IR_STREAMZAP=m -# CONFIG_IR_IGORPLUGUSB is not set +CONFIG_IR_IGORPLUGUSB=m CONFIG_IR_IGUANA=m CONFIG_IR_TTUSBIR=m CONFIG_RC_LOOPBACK=m @@ -3511,6 +3533,7 @@ CONFIG_USB_GSPCA_STV0680=m CONFIG_USB_GSPCA_SUNPLUS=m CONFIG_USB_GSPCA_T613=m CONFIG_USB_GSPCA_TOPRO=m +CONFIG_USB_GSPCA_TOUPTEK=m CONFIG_USB_GSPCA_TV8532=m CONFIG_USB_GSPCA_VC032X=m CONFIG_USB_GSPCA_VICAM=m @@ -3914,15 +3937,23 @@ CONFIG_DRM_KMS_CMA_HELPER=y # # I2C encoder or helper chips # -# CONFIG_DRM_I2C_ADV7511 is not set +CONFIG_DRM_I2C_ADV7511=m CONFIG_DRM_I2C_CH7006=m CONFIG_DRM_I2C_SIL164=m CONFIG_DRM_I2C_NXP_TDA998X=m -# CONFIG_DRM_PTN3460 is not set +CONFIG_DRM_PTN3460=m # CONFIG_DRM_EXYNOS is not set CONFIG_DRM_UDL=m CONFIG_DRM_ARMADA=m CONFIG_DRM_TILCDC=y +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +# CONFIG_DRM_PANEL_SIMPLE is not set +# CONFIG_DRM_PANEL_LD9040 is not set +# CONFIG_DRM_PANEL_S6E8AA0 is not set # CONFIG_DRM_STI is not set # @@ -4004,7 +4035,7 @@ CONFIG_BACKLIGHT_AAT2870=m CONFIG_BACKLIGHT_LM3630A=m CONFIG_BACKLIGHT_LM3639=m CONFIG_BACKLIGHT_LP855X=m -# CONFIG_BACKLIGHT_LP8788 is not set +CONFIG_BACKLIGHT_LP8788=m CONFIG_BACKLIGHT_PANDORA=m CONFIG_BACKLIGHT_TPS65217=m CONFIG_BACKLIGHT_AS3711=m @@ -4085,6 +4116,11 @@ CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_USB_6FIRE=m CONFIG_SND_USB_HIFACE=m CONFIG_SND_BCD2000=m +CONFIG_SND_USB_LINE6=m +CONFIG_SND_USB_POD=m +CONFIG_SND_USB_PODHD=m +CONFIG_SND_USB_TONEPORT=m +CONFIG_SND_USB_VARIAX=m # CONFIG_SND_SOC is not set CONFIG_SOUND_PRIME=m CONFIG_AC97_BUS=m @@ -4108,6 +4144,7 @@ CONFIG_HID_APPLE=y # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set CONFIG_HID_BELKIN=y +# CONFIG_HID_BETOP_FF is not set CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_PRODIKEYS=m @@ -4156,7 +4193,7 @@ CONFIG_HID_PICOLCD_BACKLIGHT=y CONFIG_HID_PICOLCD_LCD=y CONFIG_HID_PICOLCD_LEDS=y CONFIG_HID_PICOLCD_CIR=y -# CONFIG_HID_PLANTRONICS is not set +CONFIG_HID_PLANTRONICS=m # CONFIG_HID_PRIMAX is not set CONFIG_HID_ROCCAT=m CONFIG_HID_SAITEK=m @@ -4203,9 +4240,9 @@ CONFIG_USB_HIDDEV=y CONFIG_I2C_HID=m CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=m +CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=m +CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # @@ -4235,7 +4272,6 @@ CONFIG_USB_EHCI_MXC=m CONFIG_USB_EHCI_HCD_PLATFORM=m CONFIG_USB_OXU210HP_HCD=m CONFIG_USB_ISP116X_HCD=m -CONFIG_USB_ISP1760_HCD=m CONFIG_USB_ISP1362_HCD=m CONFIG_USB_FUSBH200_HCD=m CONFIG_USB_FOTG210_HCD=m @@ -4300,18 +4336,17 @@ CONFIG_USBIP_HOST=m # CONFIG_USBIP_DEBUG is not set # CONFIG_USB_MUSB_HDRC is not set # CONFIG_USB_DWC3 is not set -CONFIG_USB_DWC2=m -# CONFIG_USB_DWC2_HOST is not set +CONFIG_USB_DWC2=y +CONFIG_USB_DWC2_HOST=y # # Gadget/Dual-role mode requires USB Gadget support to be enabled # -# CONFIG_USB_DWC2_PERIPHERAL is not set -CONFIG_USB_DWC2_DUAL_ROLE=y CONFIG_USB_DWC2_PLATFORM=m # CONFIG_USB_DWC2_DEBUG is not set # CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set # CONFIG_USB_CHIPIDEA is not set +# CONFIG_USB_ISP1760 is not set # # USB port drivers @@ -4492,9 +4527,8 @@ CONFIG_MMC_SDHCI_PLTFM=m # CONFIG_MMC_SDHCI_OF_ARASAN is not set # CONFIG_MMC_SDHCI_CNS3XXX is not set CONFIG_MMC_SDHCI_ESDHC_IMX=m -CONFIG_MMC_SDHCI_PXAV3=m -CONFIG_MMC_SDHCI_PXAV2=m CONFIG_MMC_SDHCI_BCM2835=m +# CONFIG_MMC_SDHCI_F_SDH30 is not set CONFIG_MMC_MXC=m CONFIG_MMC_TMIO_CORE=m CONFIG_MMC_TMIO=m @@ -4521,6 +4555,7 @@ CONFIG_MS_BLOCK=m CONFIG_LEDS_GPIO_REGISTER=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set # # LED drivers @@ -4538,7 +4573,7 @@ CONFIG_LEDS_LP5523=m CONFIG_LEDS_LP5562=m CONFIG_LEDS_LP8501=m CONFIG_LEDS_LP8788=m -# CONFIG_LEDS_LP8860 is not set +CONFIG_LEDS_LP8860=m CONFIG_LEDS_PCA955X=m CONFIG_LEDS_PCA963X=m CONFIG_LEDS_WM831X_STATUS=m @@ -4602,10 +4637,11 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_88PM860X=y CONFIG_RTC_DRV_88PM80X=y +# CONFIG_RTC_DRV_ABB5ZES3 is not set CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y -# CONFIG_RTC_DRV_DS1374_WDT is not set +CONFIG_RTC_DRV_DS1374_WDT=y CONFIG_RTC_DRV_DS1672=y CONFIG_RTC_DRV_DS3232=y # CONFIG_RTC_DRV_HYM8563 is not set @@ -4668,6 +4704,7 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1685_FAMILY is not set CONFIG_RTC_DRV_DS1742=y # CONFIG_RTC_DRV_DS2404 is not set CONFIG_RTC_DRV_DA9052=y @@ -4762,7 +4799,6 @@ CONFIG_88EU_AP_MODE=y CONFIG_R8723AU=m CONFIG_8723AU_AP_MODE=y CONFIG_8723AU_BT_COEXIST=y -# CONFIG_LINE6_USB is not set CONFIG_VT6656=m # @@ -4880,18 +4916,11 @@ CONFIG_SPEAKUP_SYNTH_SOFT=m CONFIG_SPEAKUP_SYNTH_SPKOUT=m CONFIG_SPEAKUP_SYNTH_TXPRT=m CONFIG_SPEAKUP_SYNTH_DUMMY=m -CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m CONFIG_STAGING_MEDIA=y -# CONFIG_I2C_BCM2048 is not set -CONFIG_VIDEO_TLG2300=m -# CONFIG_DVB_MN88472 is not set -# CONFIG_DVB_MN88473 is not set -CONFIG_MEDIA_PARPORT_SUPPORT=y -CONFIG_VIDEO_BWQCAM=m -CONFIG_VIDEO_CQCAM=m -CONFIG_VIDEO_W9966=m -# CONFIG_VIDEO_SAA7191 is not set +CONFIG_I2C_BCM2048=m +CONFIG_DVB_MN88472=m +CONFIG_DVB_MN88473=m # CONFIG_LIRC_STAGING is not set # @@ -4912,6 +4941,7 @@ CONFIG_LNET_MAX_PAYLOAD=1048576 CONFIG_DGAP=m # CONFIG_GS_FPGABOOT is not set # CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set +# CONFIG_FB_TFT is not set CONFIG_CLKDEV_LOOKUP=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y @@ -4927,8 +4957,10 @@ CONFIG_COMMON_CLK_MAX77686=m # CONFIG_COMMON_CLK_SI570 is not set CONFIG_COMMON_CLK_S2MPS11=m CONFIG_CLK_TWL6040=m +# CONFIG_CLK_QORIQ is not set # CONFIG_COMMON_CLK_PALMAS is not set # CONFIG_COMMON_CLK_PXA is not set +# CONFIG_COMMON_CLK_CDCE706 is not set # CONFIG_COMMON_CLK_QCOM is not set # @@ -4951,9 +4983,16 @@ CONFIG_VT8500_TIMER=y # CONFIG_CLKSRC_VERSATILE is not set CONFIG_MAILBOX=y CONFIG_PL320_MBOX=y +# CONFIG_ALTERA_MBOX is not set CONFIG_IOMMU_SUPPORT=y # +# Generic IOMMU Pagetable Support +# +# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set +# CONFIG_ARM_SMMU is not set + +# # Remoteproc drivers # # CONFIG_STE_MODEM_RPROC is not set @@ -4979,6 +5018,7 @@ CONFIG_DEVFREQ_GOV_USERSPACE=m # # DEVFREQ Drivers # +CONFIG_PM_DEVFREQ_EVENT=y # CONFIG_EXTCON is not set # CONFIG_MEMORY is not set CONFIG_IIO=m @@ -4998,31 +5038,35 @@ CONFIG_HID_SENSOR_ACCEL_3D=m CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m -# CONFIG_KXSD9 is not set +CONFIG_KXSD9=m CONFIG_MMA8452=m CONFIG_KXCJK1013=m +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set # # Analog to digital converters # -# CONFIG_AD7266 is not set +CONFIG_AD_SIGMA_DELTA=m +CONFIG_AD7266=m CONFIG_AD7291=m -# CONFIG_AD7298 is not set -# CONFIG_AD7476 is not set -# CONFIG_AD7791 is not set -# CONFIG_AD7793 is not set -# CONFIG_AD7887 is not set -# CONFIG_AD7923 is not set +CONFIG_AD7298=m +CONFIG_AD7476=m +CONFIG_AD7791=m +CONFIG_AD7793=m +CONFIG_AD7887=m +CONFIG_AD7923=m CONFIG_AD799X=m +# CONFIG_CC10001_ADC is not set CONFIG_LP8788_ADC=m CONFIG_MAX1027=m CONFIG_MAX1363=m -# CONFIG_MCP320X is not set +CONFIG_MCP320X=m CONFIG_MCP3422=m CONFIG_NAU7802=m CONFIG_TI_ADC081C=m CONFIG_TI_ADC128S052=m -CONFIG_TI_AM335X_ADC=m +# CONFIG_TI_AM335X_ADC is not set CONFIG_TWL4030_MADC=m CONFIG_TWL6030_GPADC=m # CONFIG_VF610_ADC is not set @@ -5031,13 +5075,18 @@ CONFIG_VIPERBOARD_ADC=m # # Amplifiers # -# CONFIG_AD8366 is not set +CONFIG_AD8366=m # # Hid Sensor IIO Common # CONFIG_HID_SENSOR_IIO_COMMON=m CONFIG_HID_SENSOR_IIO_TRIGGER=m + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORHUB is not set CONFIG_IIO_ST_SENSORS_I2C=m CONFIG_IIO_ST_SENSORS_SPI=m CONFIG_IIO_ST_SENSORS_CORE=m @@ -5046,18 +5095,18 @@ CONFIG_IIO_ST_SENSORS_CORE=m # Digital to analog converters # CONFIG_AD5064=m -# CONFIG_AD5360 is not set +CONFIG_AD5360=m CONFIG_AD5380=m -# CONFIG_AD5421 is not set +CONFIG_AD5421=m CONFIG_AD5446=m -# CONFIG_AD5449 is not set -# CONFIG_AD5504 is not set -# CONFIG_AD5624R_SPI is not set -# CONFIG_AD5686 is not set -# CONFIG_AD5755 is not set -# CONFIG_AD5764 is not set -# CONFIG_AD5791 is not set -# CONFIG_AD7303 is not set +CONFIG_AD5449=m +CONFIG_AD5504=m +CONFIG_AD5624R_SPI=m +CONFIG_AD5686=m +CONFIG_AD5755=m +CONFIG_AD5764=m +CONFIG_AD5791=m +CONFIG_AD7303=m CONFIG_MAX517=m CONFIG_MAX5821=m CONFIG_MCP4725=m @@ -5070,21 +5119,21 @@ CONFIG_MCP4922=m # # Clock Generator/Distribution # -# CONFIG_AD9523 is not set +CONFIG_AD9523=m # # Phase-Locked Loop (PLL) frequency synthesizers # -# CONFIG_ADF4350 is not set +CONFIG_ADF4350=m # # Digital gyroscope sensors # -# CONFIG_ADIS16080 is not set -# CONFIG_ADIS16130 is not set -# CONFIG_ADIS16136 is not set -# CONFIG_ADIS16260 is not set -# CONFIG_ADXRS450 is not set +CONFIG_ADIS16080=m +CONFIG_ADIS16130=m +CONFIG_ADIS16136=m +CONFIG_ADIS16260=m +CONFIG_ADXRS450=m CONFIG_BMG160=m CONFIG_HID_SENSOR_GYRO_3D=m CONFIG_IIO_ST_GYRO_3AXIS=m @@ -5095,16 +5144,19 @@ CONFIG_ITG3200=m # # Humidity sensors # -# CONFIG_DHT11 is not set -# CONFIG_SI7005 is not set -# CONFIG_SI7020 is not set +CONFIG_DHT11=m +CONFIG_SI7005=m +CONFIG_SI7020=m # # Inertial measurement units # -# CONFIG_ADIS16400 is not set -# CONFIG_ADIS16480 is not set +CONFIG_ADIS16400=m +CONFIG_ADIS16480=m +# CONFIG_KMX61 is not set CONFIG_INV_MPU6050_IIO=m +CONFIG_IIO_ADIS_LIB=m +CONFIG_IIO_ADIS_LIB_BUFFER=y # # Light sensors @@ -5112,12 +5164,14 @@ CONFIG_INV_MPU6050_IIO=m CONFIG_ADJD_S311=m CONFIG_AL3320A=m CONFIG_APDS9300=m -# CONFIG_CM32181 is not set +CONFIG_CM32181=m +CONFIG_CM3232=m CONFIG_CM36651=m CONFIG_GP2AP020A00F=m CONFIG_ISL29125=m CONFIG_HID_SENSOR_ALS=m CONFIG_HID_SENSOR_PROX=m +CONFIG_JSA1212=m CONFIG_LTR501=m CONFIG_TCS3414=m CONFIG_TCS3472=m @@ -5128,7 +5182,7 @@ CONFIG_VCNL4000=m # # Magnetometer sensors # -# CONFIG_AK8975 is not set +CONFIG_AK8975=m CONFIG_AK09911=m CONFIG_MAG3110=m CONFIG_HID_SENSOR_MAGNETOMETER_3D=m @@ -5151,11 +5205,13 @@ CONFIG_IIO_SYSFS_TRIGGER=m # # Pressure sensors # -# CONFIG_BMP280 is not set +CONFIG_BMP280=m CONFIG_HID_SENSOR_PRESS=m CONFIG_MPL115=m -# CONFIG_MPL3115 is not set -# CONFIG_IIO_ST_PRESS is not set +CONFIG_MPL3115=m +CONFIG_IIO_ST_PRESS=m +CONFIG_IIO_ST_PRESS_I2C=m +CONFIG_IIO_ST_PRESS_SPI=m CONFIG_T5403=m # @@ -5164,13 +5220,18 @@ CONFIG_T5403=m CONFIG_AS3935=m # +# Proximity sensors +# +# CONFIG_SX9500 is not set + +# # Temperature sensors # CONFIG_MLX90614=m CONFIG_TMP006=m CONFIG_PWM=y CONFIG_PWM_SYSFS=y -# CONFIG_PWM_BCM2835 is not set +CONFIG_PWM_BCM2835=m # CONFIG_PWM_FSL_FTM is not set CONFIG_PWM_IMX=m # CONFIG_PWM_PCA9685 is not set @@ -5355,7 +5416,7 @@ CONFIG_SQUASHFS_DECOMP_SINGLE=y # CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y -# CONFIG_SQUASHFS_LZ4 is not set +CONFIG_SQUASHFS_LZ4=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set @@ -5376,6 +5437,7 @@ CONFIG_ROMFS_ON_BLOCK=y CONFIG_ROMFS_ON_MTD=y CONFIG_PSTORE=y # CONFIG_PSTORE_CONSOLE is not set +# CONFIG_PSTORE_PMSG is not set # CONFIG_PSTORE_FTRACE is not set # CONFIG_PSTORE_RAM is not set CONFIG_SYSV_FS=m @@ -5390,6 +5452,7 @@ CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_FS_SECURITY=y # CONFIG_F2FS_CHECK_FS is not set +# CONFIG_F2FS_IO_TRACE is not set CONFIG_ORE=m CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m @@ -5403,6 +5466,7 @@ CONFIG_NFS_V4_2=y CONFIG_PNFS_FILE_LAYOUT=m CONFIG_PNFS_BLOCK=m CONFIG_PNFS_OBJLAYOUT=m +CONFIG_PNFS_FLEXFILE_LAYOUT=m CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" # CONFIG_NFS_V4_1_MIGRATION is not set CONFIG_NFS_V4_SECURITY_LABEL=y @@ -5415,6 +5479,7 @@ CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y +CONFIG_NFSD_PNFS=y CONFIG_NFSD_V4_SECURITY_LABEL=y # CONFIG_NFSD_FAULT_INJECTION is not set CONFIG_GRACE_PERIOD=m @@ -5533,6 +5598,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_INFO_REDUCED is not set # CONFIG_DEBUG_INFO_SPLIT is not set CONFIG_DEBUG_INFO_DWARF4=y +# CONFIG_GDB_SCRIPTS is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 @@ -5612,6 +5678,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set CONFIG_NOTIFIER_ERROR_INJECTION=m CONFIG_PM_NOTIFIER_ERROR_INJECT=m +# CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y @@ -5666,6 +5733,7 @@ CONFIG_INTERVAL_TREE_TEST=m # CONFIG_PERCPU_TEST is not set # CONFIG_ATOMIC64_SELFTEST is not set CONFIG_ASYNC_RAID6_TEST=m +# CONFIG_TEST_HEXDUMP is not set # CONFIG_TEST_STRING_HELPERS is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_TEST_RHASHTABLE is not set @@ -5692,7 +5760,6 @@ CONFIG_DEBUG_USER=y # CONFIG_DEBUG_LL is not set CONFIG_DEBUG_IMX_UART_PORT=1 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -# CONFIG_DEBUG_UART_PL01X is not set # CONFIG_DEBUG_UART_8250 is not set # CONFIG_DEBUG_UART_BCM63XX is not set CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" @@ -5709,7 +5776,6 @@ CONFIG_PERSISTENT_KEYRINGS=y CONFIG_BIG_KEYS=y CONFIG_TRUSTED_KEYS=m CONFIG_ENCRYPTED_KEYS=m -# CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y @@ -5873,6 +5939,7 @@ CONFIG_CRYPTO_DRBG=m CONFIG_CRYPTO_USER_API=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_HASH_INFO=y CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_PICOXCELL is not set @@ -5890,6 +5957,7 @@ CONFIG_BINARY_PRINTF=y # CONFIG_RAID6_PQ=m CONFIG_BITREVERSE=y +# CONFIG_HAVE_ARCH_BITREVERSE is not set CONFIG_RATIONAL=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y -- 2.0.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] [PATCH 2/3] ARMv6: config: Reenable DWC2 host support
by Dirk Müller 02 Apr '15

02 Apr '15

We need the USB host controller support in order to have network on the Raspberry Pi, as the network is connected via USB. --- config/armv6hl/default | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/config/armv6hl/default b/config/armv6hl/default index 877caef..732c7c3 100644 --- a/config/armv6hl/default +++ b/config/armv6hl/default @@ -2104,10 +2104,6 @@ CONFIG_SLHC=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y - -# -# Host-side USB support is needed for USB Network Adapter support -# CONFIG_USB_NET_DRIVERS=m CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m @@ -4209,9 +4205,9 @@ CONFIG_USB_HIDDEV=y CONFIG_I2C_HID=m CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=m +CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=m +CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # @@ -4307,14 +4303,12 @@ CONFIG_USBIP_HOST=m # CONFIG_USBIP_DEBUG is not set # CONFIG_USB_MUSB_HDRC is not set # CONFIG_USB_DWC3 is not set -CONFIG_USB_DWC2=m -# CONFIG_USB_DWC2_HOST is not set +CONFIG_USB_DWC2=y +CONFIG_USB_DWC2_HOST=y # # Gadget/Dual-role mode requires USB Gadget support to be enabled # -# CONFIG_USB_DWC2_PERIPHERAL is not set -CONFIG_USB_DWC2_DUAL_ROLE=y CONFIG_USB_DWC2_PLATFORM=m # CONFIG_USB_DWC2_DEBUG is not set # CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -- 2.0.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] [PATCH 1/3] ARMv6: config: Cleanup default config
by Dirk Müller 02 Apr '15

02 Apr '15

Previous updates enabled config options that do not make sense on ARMv6. ARMv6 default flavor is actually just a RPi1 kernel, so enabling platform support for hardware that is unavailable there and that conflicts with the Rpi drivers should not be done. This causes the kernel to boot again on a Rpi1. --- config/armv6hl/default | 42 +++++------------------------------------- 1 file changed, 5 insertions(+), 37 deletions(-) diff --git a/config/armv6hl/default b/config/armv6hl/default index b74f04b..877caef 100644 --- a/config/armv6hl/default +++ b/config/armv6hl/default @@ -362,15 +362,7 @@ CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM2835=y CONFIG_ARCH_CNS3XXX=y CONFIG_MACH_CNS3420VB=y -CONFIG_ARCH_INTEGRATOR=y - -# -# Integrator Options -# -CONFIG_ARCH_INTEGRATOR_AP=y -CONFIG_ARCH_INTEGRATOR_CP=y -CONFIG_ARCH_CINTEGRATOR=y -CONFIG_INTEGRATOR_IMPD1=y +# CONFIG_ARCH_INTEGRATOR is not set CONFIG_ARCH_MXC=y CONFIG_MXC_AVIC=y CONFIG_MXC_DEBUG_BOARD=y @@ -434,7 +426,6 @@ CONFIG_IMX_HAVE_PLATFORM_SPI_IMX=y CONFIG_ARCH_PICOXCELL=y CONFIG_ARCH_VT8500=y CONFIG_ARCH_WM8750=y -CONFIG_PLAT_VERSATILE=y CONFIG_ARM_TIMER_SP804=y # @@ -478,7 +469,6 @@ CONFIG_MULTI_IRQ_HANDLER=y # CONFIG_ARM_ERRATA_326103 is not set CONFIG_ARM_ERRATA_411920=y # CONFIG_ARM_ERRATA_364296 is not set -CONFIG_ICST=y # # Bus support @@ -599,7 +589,6 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # CONFIG_CPUFREQ_DT=m # CONFIG_ARM_IMX6Q_CPUFREQ is not set -CONFIG_ARM_INTEGRATOR=y # CONFIG_ARM_KIRKWOOD_CPUFREQ is not set # @@ -1770,7 +1759,6 @@ CONFIG_SENSORS_APDS990X=m CONFIG_HMC6352=m CONFIG_DS1682=m # CONFIG_TI_DAC7512 is not set -# CONFIG_ARM_CHARLCD is not set # CONFIG_BMP085_I2C is not set # CONFIG_BMP085_SPI is not set CONFIG_USB_SWITCH_FSA9480=m @@ -2660,21 +2648,12 @@ CONFIG_DEVKMEM=y # Serial drivers # CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=32 -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SERIAL_8250_DW is not set -# CONFIG_SERIAL_8250_EM is not set +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +# CONFIG_SERIAL_AMBA_PL010 is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y # CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set @@ -2688,7 +2667,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_CONSOLE_POLL=y CONFIG_SERIAL_VT8500=y CONFIG_SERIAL_VT8500_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=m # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_SC16IS7XX is not set # CONFIG_SERIAL_BCM63XX is not set @@ -4046,8 +4024,6 @@ CONFIG_HDMI=y # # Console display driver support # -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y @@ -4951,9 +4927,6 @@ CONFIG_COMMON_CLK=y # Common Clock Framework # CONFIG_COMMON_CLK_WM831X=m -CONFIG_COMMON_CLK_VERSATILE=y -# CONFIG_CLK_SP810 is not set -# CONFIG_CLK_VEXPRESS_OSC is not set CONFIG_COMMON_CLK_MAX_GEN=y CONFIG_COMMON_CLK_MAX77686=m # CONFIG_COMMON_CLK_MAX77802 is not set @@ -5000,7 +4973,6 @@ CONFIG_IOMMU_SUPPORT=y # SOC (System On Chip) specific Drivers # CONFIG_SOC_TI=y -CONFIG_SOC_INTEGRATOR_CM=y CONFIG_PM_DEVFREQ=y # @@ -5221,8 +5193,6 @@ CONFIG_IRQCHIP=y CONFIG_ARM_GIC=y CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 -CONFIG_VERSATILE_FPGA_IRQ=y -CONFIG_VERSATILE_FPGA_IRQ_NR=4 # CONFIG_IPACK_BUS is not set CONFIG_RESET_CONTROLLER=y # CONFIG_FMC is not set @@ -5733,12 +5703,10 @@ CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y # CONFIG_DEBUG_LL is not set CONFIG_DEBUG_IMX_UART_PORT=1 -CONFIG_DEBUG_LL_INCLUDE="debug/pl01x.S" -CONFIG_DEBUG_UART_PL01X=y +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# CONFIG_DEBUG_UART_PL01X is not set # CONFIG_DEBUG_UART_8250 is not set # CONFIG_DEBUG_UART_BCM63XX is not set -CONFIG_DEBUG_UART_PHYS=0x16000000 -CONFIG_DEBUG_UART_VIRT=0xf1600000 CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" # CONFIG_ARM_KPROBES_TEST is not set # CONFIG_PID_IN_CONTEXTIDR is not set -- 2.0.4 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

1 0

[opensuse-kernel] large data transfer rate slowdows over NFSv4 local lan with kernel 3.19.3x ?
by lyndat3＠your-mail.com 01 Apr '15

01 Apr '15

I was just pinged on this by a client; I can reproduce it here. I have two opensuse 13.2 machines. NFS xfers -- cp & rsync -- between them slow to a crawl: < 1 MB/sec in the worst case, over a 1Gb local lan. Chats @ #networking/#nfs suggest this is a kernel+NFS issue. So checking here 1st. Both machines run kernel uname -rm 3.19.3-1.gf10e7fc-default x86_64 Both have NFS installed. Packages include nfs-client-1.3.0-4.2.1.x86_64 nfs-kernel-server-1.3.0-4.2.1.x86_64 The server's store is at /NAS/NAS1 it's on a LV on a software (mdadm v3.3.1) RAID-10 array. The client's mounted it at /mnt/NFS4/NAS1 mount | grep NAS1 xen01.loc:/ on /mnt/NFS4/NAS1 type nfs4 (rw,nosuid,nodev,relatime,sync,vers=4.0,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=2,sec=sys,clientaddr=10.0.0.101,fsc,local_lock=none,addr=10.0.0.1) The diagnostics I can think to do follow. creating test files @ both machines @ server dd if=/dev/zero of=/NAS/NAS1/dump-server-file bs=1024 count=1000000 1000000+0 records in 1000000+0 records out 1024000000 bytes (1.0 GB) copied, 1.37631 s, 744 MB/s @ client dd if=/dev/zero of=~/dump-client-file bs=1024 count=1000000 1000000+0 records in 1000000+0 records out 1024000000 bytes (1.0 GB) copied, 1.988 s, 515 MB/s TESTS (1) server -> server, local cp rm -f /tmp/dump-server-file time /bin/cp /NAS/NAS1/dump-server-file /tmp/ real 0m0.486s user 0m0.004s sys 0m0.480s ~= 2100MB/s (real) ~= 2100MB/s (sys) (2) server -> server, local rsync rm -f /tmp/dump-server-file time /usr/bin/rsync /NAS/NAS1/dump-server-file /tmp/ real 0m2.491s user 0m3.344s sys 0m1.264s ~= 411 MB/s (real) ~= 810 MB/s (sys) (3) client -> server, PING ping -c 10 10.0.0.1 PING 10.0.0.1 (10.0.0.1) 56(84) bytes of data. 64 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.307 ms 64 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=0.280 ms 64 bytes from 10.0.0.1: icmp_seq=3 ttl=64 time=0.303 ms 64 bytes from 10.0.0.1: icmp_seq=4 ttl=64 time=0.280 ms 64 bytes from 10.0.0.1: icmp_seq=5 ttl=64 time=0.262 ms 64 bytes from 10.0.0.1: icmp_seq=6 ttl=64 time=0.290 ms 64 bytes from 10.0.0.1: icmp_seq=7 ttl=64 time=0.281 ms 64 bytes from 10.0.0.1: icmp_seq=8 ttl=64 time=0.286 ms 64 bytes from 10.0.0.1: icmp_seq=9 ttl=64 time=0.287 ms 64 bytes from 10.0.0.1: icmp_seq=10 ttl=64 time=0.291 ms --- 10.0.0.1 ping statistics --- 10 packets transmitted, 10 received, 0% packet loss, time 8999ms rtt min/avg/max/mdev = 0.262/0.286/0.307/0.023 ms (4) client -> `iperf3 -s`@server: TCP, one thread iperf3 -c 10.0.0.1 -t 60 -i 15 -F ~/dump-client-file -f M [ ID] Interval Transfer Bandwidth Retr [ 5] 0.00-3.08 sec 337 MBytes 918 Mbits/sec 10 sender [ 5] 0.00-3.08 sec 336 MBytes 915 Mbits/sec receiver (5) client -> `iperf3 -s`@server: TCP, 100 threads iperf3 -c 10.0.0.1 -t 60 -i 15 -F ~/dump-client-file -f M -P100 [ ID] Interval Transfer Bandwidth Retr ... [SUM] 0.00-31.08 sec 3.40 GBytes 940 Mbits/sec 121 sender [SUM] 0.00-31.08 sec 3.39 GBytes 937 Mbits/sec receiver (6) client -> `iperf3 -s`@server: UDP, one thread iperf3 -c 10.0.0.1 -t 60 -i 15 -F ~/dump-client-file -f M -b 1G -P 1 [ ID] Interval Transfer Bandwidth Retr ... [ 5] 0.00-8.97 sec 977 MBytes 913 Mbits/sec 25 sender [ 5] 0.00-8.97 sec 976 MBytes 912 Mbits/sec receiver (7) client -> `iperf3 -s`@server: UDP, 100 threads iperf3 -c 10.0.0.1 -t 60 -i 15 -F ~/dump-client-file -f M -b 1G -P 100 [ ID] Interval Transfer Bandwidth Retr ... [SUM] 0.00-60.01 sec 6.56 GBytes 939 Mbits/sec 180 sender [SUM] 0.00-60.01 sec 6.55 GBytes 937 Mbits/sec receiver (8) client -> server, cp over NFS rm -f /mnt/NFS4/NAS1/dump-client-file time /bin/cp ~/dump-client-file /mnt/NFS4/NAS1/ real 0m54.589s user 0m0.005s sys 0m1.225s ~= 18.75 MB/s (real) ~= 810 MB/s (sys) (9) client -> server, rsync over NFS rm -f /mnt/NFS4/NAS1/dump-client-file time /usr/bin/rsync ~/dump-client-file /mnt/NFS4/NAS1/ real 18m13.408s user 0m4.642s sys 0m2.627s ~= 0.937 MB/s (real) ~= 390 MB/s (sys) If there's additional diagnostic info, I can provide it. What's causing the disproportionate slow down and what's needed for a fix? LT -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kernel+owner(a)opensuse.org

3 9