January 2011 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] dvb_bt8xx, bt878 module loading issue after update to 2.6.34.7-0.7-desktop
by richard -rw- weinberger 20 Jan '11

20 Jan '11

Hi, today zypper updated my kernel from 2.6.34-12-desktop to 2.6.34.7-0.7-desktop, now I have problems with the modules dvb_bt8xx and bt878. The kernel hangs while loading dvb_bt8xx: [ 2.765243] saa7134[0] Tuner type is 38 [ 32.616021] dvb_bt8xx: gave up waiting for init of module bt878. [ 32.616105] dvb_bt8xx: Unknown symbol bt878_num [ 62.617016] dvb_bt8xx: gave up waiting for init of module bt878. [ 62.617095] dvb_bt8xx: Unknown symbol bt878_start [ 92.618016] dvb_bt8xx: gave up waiting for init of module bt878. [ 92.618094] dvb_bt8xx: Unknown symbol bt878_stop [ 122.619018] dvb_bt8xx: gave up waiting for init of module bt878. [ 122.619096] dvb_bt8xx: Unknown symbol bt878 or while loading bt878: [ 2.735017] saa7134[0] Tuner type is 38 [ 32.582282] bt878: gave up waiting for init of module bttv. [ 32.582365] bt878: Unknown symbol bttv_read_gpio [ 62.582277] bt878: gave up waiting for init of module bttv. [ 62.582355] bt878: Unknown symbol bttv_write_gpio [ 92.582277] bt878: gave up waiting for init of module bttv. [ 92.582355] bt878: Unknown symbol bttv_gpio_enable This happens always after a reboot and sometimes after a shutdown. With 2.6.34-12-desktop I've had no problems with these modules. Any ideas? Dmesgs for all cases are attached. -- Thanks, //richard

3 8

[opensuse-kernel] Rail Model font for coders
by hare_krsna_hare_krsna_krsna_krsna_hare_hare_hare_rama_hare_rama_rama_rama_hare_hare＠lavabit.com 20 Jan '11

20 Jan '11

There is a font for coders called Rail Model, please include it with Linux distributions: http://code.google.com/p/railmodel/downloads/detail?name=RailModelFont.zip&… Copyright: Copyright (c) 2010, Copyright (c) Holder for the commissioned (Unicode 0915) devanagri glyph design as the new 11th english and european glyph and the cancellation of the previous k / K is (His Divine Grace) Prabhupada, Founder Acharya & Permanent Sole Initiator of the Panca Tattva / Caitanya Mahaprabhu / Vaisnava Movement, the permanent person not the estate, state, representative/s or representative organisation/s etc. All Rights Reserved. (full and also other copyright information at accompanying font files) Description: November 20 2010 (Hrant H Papazian) Version 1.1 Ð k/K (Unicode glyphs /006B and /004B) exchanged through Unicode glyph / uni0915 Ð released as N: Hrant H Papazian E: hpapazian..... W: http://www.themicrofoundry.com D: Designer Ð Unicode glyph /uni0915 upper and lower case Best, Meeku -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] [patch 0/5] scripts/sequence-patch.sh: Add some useful options
by Jeff Mahoney 19 Jan '11

19 Jan '11

Hi all - There are a few things I do every time I expand the source tree with sequence-patch.sh. Or, rather, things I should do and forget to do a lot. The first I always remember to do: Copy the config I want to test with to my build directory. The second I forget more often than not: Expand the kABI references into my build directory. One of the things that bites me occasionally is when there are kABI changes that go un-noticed until the automated build checker flags them and sends me an email yelling at me for my carelessness. This patch adds three options to scripts/sequence-patch.sh to take care of these automatically. --build-dir=PATH allows you to specify the build directory you'll be using. It will create the directory if it doesn't exist. It defaults to $PATCH_DIR. --config=ARCH-FLAVOR allows you to specify the config you'll use. It will copy the config to your build directory. It is not a fatal error if the config does not exist. It will just not copy one. --kabi allows you to direct sequence-patch to expand the kABI references into your build directory. Since the references are arch/flavor specific, it depends on --config=ARCH-FLAVOR. It is not a fatal error if the kABI reference doesn't exist since this is always the case in the master branch. The --build-dir PATH is subject to shell expansion. It is expanded late enough in the script that most variables should be available. There are also three new variables available when --config is used: $CONFIG contains the --config contents. $CONFIG_ARCH contains the arch part of the config. $CONFIG_FLAVOR contains the flavor part. For reference, I have this in my .bashrc: export SEQUENCE_PATCH_ARGS="--config=x86_64-desktop --build-dir=~/src/scratch/build/\$CONFIG_ARCH/linux-\$SRCVERSION-\$TAG-\$CONFIG_FLAVOR --kabi" I've also added patches for --ctags and --cscope which will automatically generate the databases for either of those tools in the build directory after the source tree is expanded. -Jeff -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 8

Re: [opensuse-kernel] Patch Kernel 2.6.34.7-0.7-desktop and rebuilt it - problem building rpm
by Crismon 19 Jan '11

19 Jan '11

Hello gentlemen, if I would ask for an opinion on this guide (http://istvanv.users.sourceforge.net/v4l/xc4000.html#install) to install pctv 340e .... I have the 2.6.34.7 kernel so you have to recompile the kernel using the patch-xc4000-winfast 2.6.34.x.patch. Then copy and rename the firmware a /lib/firmware. I understood the procedure? thank you very much -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

Re: [opensuse-kernel] Patch Kernel 2.6.34.7-0.7-desktop and rebuilt it - problem building rpm
by Crismon 17 Jan '11

17 Jan '11

"make rpm" after installing a new system (another openSUSE 11.3) work fine .... I have installed the new kernel but the device (pctv 340e) doesen't work. When i insert it "tail -f /var/log/message" says: Jan 15 20:15:41 linux-kfxc kernel: [ 823.273021] usb 1-4: new high speed USB device using ehci_hcd and address 3 Jan 15 20:15:41 linux-kfxc kernel: [ 823.388186] usb 1-4: New USB device found, idVendor=2304, idProduct=023e Jan 15 20:15:41 linux-kfxc kernel: [ 823.388190] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jan 15 20:15:41 linux-kfxc kernel: [ 823.388193] usb 1-4: Product: PCTV 340e SE Jan 15 20:15:41 linux-kfxc kernel: [ 823.388195] usb 1-4: Manufacturer: YUANRD Jan 15 20:15:41 linux-kfxc kernel: [ 823.388197] usb 1-4: SerialNumber: 060078CECB xc4000 module is loaded by the kernel. The module is load: linux-kfxc:/home/ # lsmod |grep xc xc4000 18980 0 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] Problems with suspending
by Stephen Shaw 16 Jan '11

16 Jan '11

I'm using the latest kernel from Kernel:HEAD with Factory. It seems that being able to suspend my laptop (lenovo T61P) is more the exception than the norm. It will either start to suspend and the light (moon looking light) just blinks forever, it does suspend but never comes back up, or just fails. Lately there has been a message dumped to the console: kernel:[20877.607239] Oops: 0000 [#1] PREEMPT SMP Message from syslogd@bender at Jan 16 01:35:38 ... kernel:[20877.607248] last sysfs file: /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill2/uevent Message from syslogd@bender at Jan 16 01:35:38 ... kernel:[20877.607428] Process bluetoothd (pid: 1752, ti=ed000000 task=ed100070 task.ti=ed000000) Message from syslogd@bender at Jan 16 01:35:38 ... kernel:[20877.607433] Stack: Message from syslogd@bender at Jan 16 01:35:38 ... kernel:[20877.607488] Call Trace: Message from syslogd@bender at Jan 16 01:35:38 ... kernel:[20877.607743] Code: 90 8d b4 26 00 00 00 00 83 ec 10 85 c0 89 7c 24 08 89 c7 89 1c 24 89 74 24 04 89 6c 24 0c 74 35 89 e0 25 00 e0 ff ff 83 40 14 01 <8b> 87 6c 01 00 00 64 ff 40 04 8b 6c 24 10 3e 8d 74 26 00 83 3f Message from syslogd@bender at Jan 16 01:35:38 ... kernel:[20877.607835] EIP: [<c027ebb3>] module_put+0x23/0xd0 SS:ESP 0068:ed001ed0 Message from syslogd@bender at Jan 16 01:35:38 ... kernel:[20877.607847] CR2: 00000000696369cb Thanks, Stephen PS, It seems like I usually need to restart network manager to get my network to work again. I'm assuming that's a NM issue though and unrelated? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

[opensuse-kernel] I would like to package kernel
by José Luis M Moreno 16 Jan '11

16 Jan '11

How I can package the kernel OpenSUSE style? If someone like to help participate can contact me. The reason is to have a version without blobs. Regards. -- José Luis A tlamaki (libre) developer. :-) http://tlamaki.org -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

Re: [opensuse-kernel] Patch Kernel 2.6.34.7-0.7-desktop and rebuilt it - problem building rpm
by Crismon 15 Jan '11

15 Jan '11

Make command work fine: IHEX firmware/advansys/38C1600.bin IHEX firmware/advansys/3550.bin IHEX firmware/advansys/38C0800.bin IHEX firmware/qlogic/1040.bin IHEX firmware/qlogic/1280.bin IHEX firmware/qlogic/12160.bin IHEX firmware/korg/k1212.dsp IHEX firmware/ess/maestro3_assp_kernel.fw IHEX firmware/ess/maestro3_assp_minisrc.fw IHEX firmware/yamaha/ds1_ctrl.fw IHEX firmware/yamaha/ds1_dsp.fw IHEX firmware/yamaha/ds1e_ctrl.fw IHEX firmware/tehuti/bdx.bin IHEX firmware/tigon/tg3.bin IHEX firmware/tigon/tg3_tso.bin IHEX firmware/tigon/tg3_tso5.bin IHEX firmware/3com/typhoon.bin IHEX2FW firmware/dabusb/firmware.fw IHEX firmware/dabusb/bitstream.bin IHEX2FW firmware/emi26/loader.fw IHEX2FW firmware/emi26/firmware.fw IHEX2FW firmware/emi26/bitstream.fw IHEX2FW firmware/emi62/loader.fw IHEX2FW firmware/emi62/bitstream.fw IHEX2FW firmware/emi62/spdif.fw IHEX2FW firmware/emi62/midi.fw IHEX firmware/kaweth/new_code.bin IHEX firmware/kaweth/trigger_code.bin IHEX firmware/kaweth/new_code_fix.bin IHEX firmware/kaweth/trigger_code_fix.bin IHEX firmware/ti_3410.fw IHEX firmware/ti_5052.fw IHEX firmware/mts_cdma.fw IHEX firmware/mts_gsm.fw IHEX firmware/mts_edge.fw H16TOFW firmware/edgeport/boot.fw H16TOFW firmware/edgeport/boot2.fw H16TOFW firmware/edgeport/down.fw H16TOFW firmware/edgeport/down2.fw IHEX firmware/edgeport/down3.bin IHEX2FW firmware/whiteheat_loader.fw IHEX2FW firmware/whiteheat.fw IHEX2FW firmware/keyspan_pda/keyspan_pda.fw IHEX2FW firmware/keyspan_pda/xircom_pgs.fw H16TOFW firmware/vicam/firmware.fw IHEX firmware/cpia2/stv0672_vp4.bin IHEX firmware/yam/1200.bin IHEX firmware/yam/9600.bin suse-desktop:/usr/src/linux-2.6.34.7-0.7 # Why "make rpm" fails? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

Re: [opensuse-kernel] Patch Kernel 2.6.34.7-0.7-desktop and rebuilt it - problem building rpm
by Crismon 15 Jan '11

15 Jan '11

Now xc4000.c is in drivers/media/common/tuners/ "make rpm semd me an error: CC [M] drivers/net/ifb.o CC [M] drivers/net/macvlan.o CC [M] drivers/net/macvtap.o CC [M] drivers/net/de600.o CC [M] drivers/net/de620.o CC [M] drivers/net/defxx.o CC [M] drivers/net/8139cp.o CC [M] drivers/net/8139too.o CC [M] drivers/net/atp.o CC [M] drivers/net/sc92031.o CC [M] drivers/net/eql.o CC [M] drivers/net/tun.o CC [M] drivers/net/veth.o CC [M] drivers/net/dl2k.o CC [M] drivers/net/r8169.o CC [M] drivers/net/amd8111e.o CC [M] drivers/net/s2io.o CC [M] drivers/net/enc28j60.o CC [M] drivers/net/ethoc.o CC [M] drivers/net/dnet.o CC [M] drivers/net/netconsole.o CC [M] drivers/net/niu.o CC [M] drivers/net/virtio_net.o LD drivers/net/built-in.o LD [M] drivers/net/bnx2x.o make[2]: *** [drivers] Error 2 errore: Stato d'uscita errato da /var/tmp/rpm-tmp.Pi9Sn7 (%build) Errori di compilazione RPM: Stato d'uscita errato da /var/tmp/rpm-tmp.Pi9Sn7 (%build) make[1]: *** [rpm] Error 1 make: *** [rpm] Error 2 I try to run make. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

Re: [opensuse-kernel] Patch Kernel 2.6.34.7-0.7-desktop and rebuilt it - problem building rpm
by Crismon 15 Jan '11

15 Jan '11

Yes, the file was xc4000.c. I read this article (http://istvanv.users.sourceforge.net/v4l/xc4000.html#install), I understand that I just pacth the kernel and do not have to install the DVB drivers. Am I wrong? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0