(In reply to Takashi Iwai from comment #1) > Could you give hwinfo output and the dmesg output from Leap 15.4 and/or TW > kernels? > > Also, please try to install Leap 15.3 kernel on top of Leap 15.4 system, and > check whether the problem is gone with that or not. (For installing Leap > 15.3 kernel, you might need to pass --force or whatever option to ignore the > package dependency.) @Mr. Takashi Iwai, short answer: problem ist NOT gone. Installed 5.3.18-57 kernel on top of current Leap-15.4 System. Behaviror same as before. However, there's a long answer, too. There's a stochastic element to all this. See, if you have, say, 12 sorties of a Leap-15.4 (or TW, for that) system, then 9x you shall find that 60���C idle temp problem, and 3x temps move to ~45���C while the fan level moves to zero. Even did experiments with Legacy Boot vs. UEFI Boot but could not find deviating behavior there, i.e., with Leap-15.4 or TW you shall find the erratic 60���C idle temp issue, with Leap-15.0 ... 15.3, live is good. Thanks for reading this. Regards, M.