(In reply to Karl Mistelberger from comment #10) > (In reply to Uwe Michael Scheffer from comment #8) > > I have a multi-bootable SSD with TW, Leap-15.4 (with 3 kernels to choose > > from) and Leap 15.3 systems on it. Leap 15.3 always goes to idle temp 45���C, > > Fan level 0, however, the TW and Leap-15.4 systems both show the 60���C idle > > temp issue. Installing 15.3 Kernels on a virginly installed Leap 15.4 system > > does not help with the 60���C idle temps. And remember you CAN see 45���C idle > > temps, fan level 0, too, on the latter systems, however, only erratically > > with a "mesasured" probabaility of ~ 25%. So, these are the current results. > > What do you make of them, what do you especially make of the stochastic > > behavior? > > Did you try the SSD on an other ThinkPad? Given the shaky behaviour I would > check whether it occurs on other hardware too. Today, I tried with a different SSD (of exactly the same type) on a different ThinkPad W530 (same type, too) and got similar results, however not quite the same. Leap-15.4 neither on btrfs nor on ext4 would reach 45���C and the fan would never relax to level 0. So with Leap-15.4 there was always the 60���C idle temp issue. With Leap-15.3 there was a surprise, on this ThinkPad temperatures would cease to 45���C only in 50% in about 10 reboots, the other 50% temperatures would stay above 55���C near 60���C, fan would wander between level 1 and level 2, but never would cease to level 0. Here's a table showing the results of days of installations and runs. ## 60���C Idle Temperatures Issue on ThinkPad W530 --- Device (A) vs Device (B) Leap-15.3 vs Leap-15.4 SSD vs Live-System btrfs vs ext4 --- Thinkpad (A) -> Leap-15.4 -> SSD -> btrfs 60���C = 75% / 45���C = 25% Thinkpad (A) -> Leap-15.4 -> SSD -> ext4 60���C = 75% / 45���C = 25% Thinkpad (A) -> Leap-15.4 -> Live -> ext4 60���C = 0% / 45���C = 100% Thinkpad (A) -> Leap-15.3 -> SSD -> btrfs 60���C = 0% / 45���C = 100% Thinkpad (A) -> Leap-15.3 -> SSD -> ext4 N.E. Thinkpad (A) -> Leap-15.3 -> Live -> ext4 N.E. --- Thinkpad (B) -> Leap-15.4 -> SSD -> btrfs 60���C = 100% / 45���C = 0% Thinkpad (B) -> Leap-15.4 -> SSD -> ext4 60���C = 100% / 45���C = 0% Thinkpad (B) -> Leap-15.4 -> Live -> ext4 60���C = 0% / 45���C = 100% Thinkpad (B) -> Leap-15.3 -> SSD -> btrfs 60���C = 50% / 45���C = 50% Thinkpad (B) -> Leap-15.3 -> SSD -> ext4 N.E. Thinkpad (B) -> Leap-15.3 -> Live -> ext4 N.E. --- Thanks for reading, Regards, M.