(In reply to Joey Lee from comment #32) > Hi Anthony, > > I have attached updated DSDT and SSDT11 tables. Could you please help to do > the following steps for debugging? I have added some debug log to the above > two tables. > > - Put updated tables to new initrd: > > mkdir -p kernel/firmware/acpi > cp dsdt.aml kernel/firmware/acpi > cp ssdt11.aml kernel/firmware/acpi > find kernel | cpio -H newc --create > > /boot/instrumented_initrd-5.12.0-2-default > cat /boot/initrd-4.12.14-94.41-default > >>/boot/instrumented_initrd-5.12.0-2-default > > - Modify /boot/grub2/grub.cfg > > Add the following kernel parameters (please remove old): > acpi.debug_level=0x2 acpi.debug_layer=0xFFFFFFFF > > Change the booting initrd: > < initrdefi /boot/initrd-5.12.0-2-default > change to > > initrdefi /boot/instrumented_initrd-5.12.0-2-default > > Then please reboot and capture dmesg log. You should see some "[ACPI Debug]" > log in dmesg. Please attach dmesg log on bugzilla. > > Thanks! I currently am running a different kernel than what you're showing (see below). Do I modify your instructions for the 5.12.3-1-default kernel? Thank you for your clarification and wonderful help with this ticket. > cat /etc/os-release | grep VERSION_ID VERSION_ID="20210515" > uname -r 5.12.3-1-default