February 2023 - openSUSE Kernel Bugs - openSUSE Mailing Lists

[Bug 1207948] New: Lenovo T14s Gen3 AMD resume from hibernation ends in kernel panic
by bugzilla_noreply＠suse.com 20 Feb '23

20 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1207948 Bug ID: 1207948 Summary: Lenovo T14s Gen3 AMD resume from hibernation ends in kernel panic Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: mjambor(a)suse.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Created attachment 864736 --> http://bugzilla.opensuse.org/attachment.cgi?id=864736&action=edit hwinfo output With the current openSUSE Tumbleweed (kernel-default-6.1.8-1.1.x86_64), attempts to resume from hibernation (from "suspend to disk") ends in kernel panic. After I type in my disk encryption password (I have kernel and initrd on an unencrypted partition), initrd takes over but a short while afterwards system hangs, does nothing for about 30 seconds and then CapsLock starts blinking). Usually the screen stays black but two or three times I have seen the contents of the screen restored and only then the laptop froze. All my attempts to get at some backtraces or error messages were not successful (I tried no_console_suspend=1 but that only meant I saw the cursor blinking before the machine froze but no messages appeared and my attempts to somehow use EFI pstore also led to nothing). Resume from suspend to RAM works fine. I am attaching output from hwinfo. -- You are receiving this mail because: You are the assignee for the bug.

1 21

[Bug 1208239] Driver for Intel Alder Lake-UP3 GT2 [UHD Graphics] -- HDMI not properly recognized
by bugzilla_noreply＠suse.com 20 Feb '23

20 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1208239 http://bugzilla.opensuse.org/show_bug.cgi?id=1208239#c3 --- Comment #3 from Patrik Jakobsson <patrik.jakobsson(a)suse.com> --- Hi Luca, Please boot without the external monitor connected and with "drm.debug=0x1e log_buf_len=8M" on the kernel command line, then attach the failing HDMI monitor and then capture the dmesg log. Attach the log here and I'll have a look. However, since you're using a stable kernel it's likely that this is an upstream bug that should be reported to Intel directly. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1208205] Latest kernel/TW updates seem to have issues with openrazer drivers and polychromatic (possibly --no-initramfs issue)
by bugzilla_noreply＠suse.com 20 Feb '23

20 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1208205 http://bugzilla.opensuse.org/show_bug.cgi?id=1208205#c3 Anthony Agelastos <iqgrande(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution|--- |FIXED --- Comment #3 from Anthony Agelastos <iqgrande(a)gmail.com> --- Issue is solved. #1208192 impacted python3-openrazer which impacted Polychromatic since it relies upon the Python interface. I used the commands from the aforementioned bug and things were able to find BLAS. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1208205] Latest kernel/TW updates seem to have issues with openrazer drivers and polychromatic (possibly --no-initramfs issue)
by bugzilla_noreply＠suse.com 20 Feb '23

20 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1208205 http://bugzilla.opensuse.org/show_bug.cgi?id=1208205#c2 --- Comment #2 from Anthony Agelastos <iqgrande(a)gmail.com> --- Issue is solved. #1208192 impacted python3-openrazer which impacted Polychromatic since it relies upon the Python interface. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1208069] Leap 15.5 & Gecko rolling plasma does not revive video from suspend?
by bugzilla_noreply＠suse.com 18 Feb '23

18 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1208069 https://bugzilla.suse.com/show_bug.cgi?id=1208069#c14 --- Comment #14 from Fritz Hudnut <non.space.1(a)gmail.com> --- Yes. I can confirm that the 5.14.21-150500.39-default kernel that the internal grub is loading does not work to revive from suspend. The question is, I ran the "update-bootloader" command after the 6.1.12 kernel was installed, but grub doesn't seem to recognize it, nor does it seem to recognize the previous 5.14.21 xxxxx .80 kernel either. I have to use the ext Super Grub2 drive option to select the 6.1.12 option. So far it is only the newest 6.1.12 kernel that revives the machine from suspend, so the question remains, how to get that kernel to be selected as "running"??? Do I have to remove all of the other kernels?? I thought grub would select the newest kernel installed to be the "running" kernel? -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1208448] New: Kernel updates after a zypper dup can leave system with no kernel to boot into
by bugzilla_noreply＠suse.com 18 Feb '23

18 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1208448 Bug ID: 1208448 Summary: Kernel updates after a zypper dup can leave system with no kernel to boot into Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Kernel Assignee: kernel-bugs(a)opensuse.org Reporter: socvirnyl.estela(a)gmail.com QA Contact: qa-bugs(a)suse.de Found By: --- Blocker: --- Hello. I was updating my openSUSE Tumbleweed machine with `zypper dup` and ended up having no kernel to boot into in my grub menu. So I will always go to an older snapshot by selecting advanced options from the menu. I have experienced this in the past and was able to fix it by booting into an installation media and chrooting to the existing installation forcing it to rebuild through chroot. Anyway, I don't know how to reproduce this nor have any idea how it happened. I have a guess that it might be the snapshot mechanism from snapper that does not sync well fast enough for it to recognize the regenerated kernel. -- You are receiving this mail because: You are the assignee for the bug.

1 1

[Bug 1208069] Leap 15.5 & Gecko rolling plasma does not revive video from suspend?
by bugzilla_noreply＠suse.com 18 Feb '23

18 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1208069 https://bugzilla.suse.com/show_bug.cgi?id=1208069#c13 --- Comment #13 from Fritz Hudnut <non.space.1(a)gmail.com> --- @Takashi: So after I installed the 6.1.12 backports kernel I ran update-bootloader in the TW system that controls grub and on reboot I checked uname -r and it shows: "uname -r 5.14.21-150500.39-default" So that isn't the "39.2" that was shown when I ran the zypper dup -l while I was in Leap, to see if that would support the new kernel, the 6.1.12 item that seemed to fix the problem. Is that just a "temporary" condition to check to see if it would fix the issue, but now something else would have to be done to make it permanent?? Or now we have too many kernels installed to let the 6.1 option bubble up?? Forgot that I didn't shut down after I ran the update-bootloader, which might reset grub to where it was . . . don't believe that this 5.14.21 kernel will work to revive the system. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1208069] Leap 15.5 & Gecko rolling plasma does not revive video from suspend?
by bugzilla_noreply＠suse.com 17 Feb '23

17 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1208069 https://bugzilla.suse.com/show_bug.cgi?id=1208069#c12 Fritz Hudnut <non.space.1(a)gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(non.space.1@gmail | |.com) | --- Comment #12 from Fritz Hudnut <non.space.1(a)gmail.com> --- (In reply to Takashi Iwai from comment #10) > (In reply to Fritz Hudnut from comment #9) > > (In reply to Takashi Iwai from comment #7) > > > Could you give hwinfo output, and the dmesg output before the suspend? > > > Also, check journal outputs if it got some kernel Oops or crash. > > > > > > Last but not least, please check with the kernel from OBS > > > Kernel:stable:Backport repo (only kernel-default.rpm) for the latest 6.1.x > > > kernel, and verify whether the problem persists with it or not. > > > > @Takashi > > > > Had a few spare moments to try to find this "OBS Kernel" data, but it seemed > > to lead to a list of links, none of which said "6.1" . . . so I would need a > > direct link to whatever site you are suggesting that I check into to get a > > newer kernel going in Leap 15.5 . . . !!??? > > It's available at > > http://download.opensuse.org/repositories/Kernel:/stable:/Backport/standard/ @Takashi: Alrighty, got the 6.1.12 xxx kernel installed and used SuperGrub2 to boot that selection, and that does seem to have revived from suspend several times and the GUI is working (as I'm typing this) . . . so that would be the preferred condition . . . . After I booted the new kernel Package Updater showed "84 packages+-" to update and when I ran the zypper dup -l it showed "2 problems" relating to, "do I want to move the 5.14 kernels from OBS to openSUSE??" Couldn't make the decision right at that moment, like, I don't need that kernel because it didn't fix the problem, so it isn't too critical . . . but, then it might be one of the back ups??? Anyway, I'll monitor the operation of Leap 15.5 for a bit, but it does seem like the 6.1.12 Backports kernel addresses the problem. Thanks kindly for the help on it. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1208239] Driver for Intel Alder Lake-UP3 GT2 [UHD Graphics] -- HDMI not properly recognized
by bugzilla_noreply＠suse.com 17 Feb '23

17 Feb '23

http://bugzilla.opensuse.org/show_bug.cgi?id=1208239 http://bugzilla.opensuse.org/show_bug.cgi?id=1208239#c2 Stefan Dirsch <sndirsch(a)suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |patrik.jakobsson(a)suse.com, | |tiwai(a)suse.com, | |tzimmermann(a)suse.com Component|X.Org |Kernel Assignee|gfx-bugs(a)suse.de |kernel-bugs(a)opensuse.org QA Contact|gfx-bugs(a)suse.de |qa-bugs(a)suse.de --- Comment #2 from Stefan Dirsch <sndirsch(a)suse.com> --- Intel Kernel driver ... reassigning. -- You are receiving this mail because: You are the assignee for the bug.

1 0

[Bug 1208069] Leap 15.5 & Gecko rolling plasma does not revive video from suspend?
by bugzilla_noreply＠suse.com 17 Feb '23

17 Feb '23

https://bugzilla.suse.com/show_bug.cgi?id=1208069 https://bugzilla.suse.com/show_bug.cgi?id=1208069#c11 --- Comment #11 from Fritz Hudnut <non.space.1(a)gmail.com> --- (In reply to Takashi Iwai from comment #10) > (In reply to Fritz Hudnut from comment #9) > > (In reply to Takashi Iwai from comment #7) > > > Could you give hwinfo output, and the dmesg output before the suspend? > > > Also, check journal outputs if it got some kernel Oops or crash. > > > > > > Last but not least, please check with the kernel from OBS > > > Kernel:stable:Backport repo (only kernel-default.rpm) for the latest 6.1.x > > > kernel, and verify whether the problem persists with it or not. > > > > @Takashi > > > > Had a few spare moments to try to find this "OBS Kernel" data, but it seemed > > to lead to a list of links, none of which said "6.1" . . . so I would need a > > direct link to whatever site you are suggesting that I check into to get a > > newer kernel going in Leap 15.5 . . . !!??? > > It's available at > > http://download.opensuse.org/repositories/Kernel:/stable:/Backport/standard/ @Takashi OK, great, precerate that. I was looking at some site that was titled "OBS" which did not seem to get past 5.14 kernels . . . didn't make sense. So you mean something like "kernel-default-6.1.12-lp154.2.1.g373f017.x86_64.rpm" would be what I would be looking for? And I would need now to remove one of the other kernels first, or in theory I can add one more?? -- You are receiving this mail because: You are the assignee for the bug.

1 0