Fritz!Card 2.0 unter SuSE Linux 7.3 Ich will eine Fritz!Card 2.0 unter SuSE Linux 7.3 installieren. Da die Treiber der Distribution nicht beiliegen habe ich sie nach der Anleitung hvogel_fritz2 in der SuSE Supportdatenbank runtergeladen, entpackt mit ./install installiert und in Yast auf AVM B1 umgestellt, einem Provider ausgewählt und so weiter. Aber mit Kinternet kann ich mich nicht einwählen, hier ist das Protokoll: SuSE Meta pppd (smpppd) Version 0.49 on ext failed to open /dev/isdnctrl: No such device Selection of provider Westerkappeln failed. Reloading configuration Deselection of provider Reloading providers. Usw. Am Ende noch die /var/log/boot.msg Hat einer ne Ahnung wie ich das lösen kann? Oder lohnt sich das SuSE 8.0 zu besorgen? Sind die Treiber schon integriert, so dass ich nicht selber Hand anlegen muss? Das ganze hab ich schon zweimal versucht, nachdem ich Linux einmal frisch installiert habe, aber das brachte auch nix. Ein zur Zeit ziemlich genervter und verzweifelter, aber Linux-Williger Newbie - Elmar Inspecting /boot/System.map-2.4.10-4GB Loaded 11713 symbols from /boot/System.map-2.4.10-4GB. Symbols match kernel version 2.4.10. Loaded 28 symbols from 4 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.10-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Tue Sep 25 12:33:54 GMT 2001 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 0000000007ffc000 (usable) <4> BIOS-e820: 0000000007ffc000 - 0000000007fff000 (ACPI data) <4> BIOS-e820: 0000000007fff000 - 0000000008000000 (ACPI NVS) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <4>On node 0 totalpages: 32764 <4>zone(0): 4096 pages. <4>zone(1): 28668 pages. <4>zone(2): 0 pages. <4>Local APIC disabled by BIOS -- reenabling. <4>Found and enabled local APIC! <4>Kernel command line: auto BOOT_IMAGE=linux ro root=308 BOOT_FILE=/boot/vmlinuz enableapic vga=0x0317 hdc=ide-scsi <4>ide_setup: hdc=ide-scsi <6>Initializing CPU#0 <4>Detected 902.084 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 1795.68 BogoMIPS <4>Memory: 125912k/131056k available (1289k kernel code, 4756k reserved, 381k data, 124k init, 0k highmem) <4>Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) <4>Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) <4>Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) <4>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) <4>Page-cache hash table entries: 32768 (order: 5, 131072 bytes) <7>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 256K <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 <7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 <7>CPU: Common caps: 0383fbff 00000000 00000000 00000000 <4>CPU: Intel Pentium III (Coppermine) stepping 06 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000040 <4>ESR value after enabling vector: 00000000 <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 902.0641 MHz. <4>..... host bus clock speed is 100.2292 MHz. <4>cpu: 0, clocks: 1002292, slice: 501146 <4>CPU0T0:1002288,T1:501136,D:6,S:501146,C:1002292 <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <4>PCI: PCI BIOS revision 2.10 entry at 0xf0900, last bus=1 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <3>Unknown bridge resource 0: assuming transparent <6>PCI: Using IRQ router VIA [1106/0686] at 00:04.0 <6>PCI: Disabling Via external APIC routing <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) <4>Starting kswapd <5>VFS: Diskquotas version dquot_6.5.0 initialized <6>vesafb: framebuffer at 0xf0000000, mapped to 0xc8800000, size 32768k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=0 <6>vesafb: protected mode interface info at c000:0f34 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>Looking for boot splash picture.... found (1024x768, 32431 bytes). <6>Initializing splash screen... done. <4>Console: switching to colour frame buffer device 104x34 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <4>block: 128 slots per queue, batch=16 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>VP_IDE: IDE controller on PCI bus 00 dev 21 <4>VP_IDE: chipset revision 16 <4>VP_IDE: not 100%% native mode: will probe irqs later <6>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1 <4> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA <4> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio <4>hda: ST340823A, ATA DISK drive <4>hdb: LITEON DVD-ROM LTD122, ATAPI CD/DVD-ROM drive <4>hdc: R/RW 4x4x32, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: 78165360 sectors (40021 MB) w/1024KiB Cache, CHS=4865/255/63, UDMA(66) <4>hdb: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.12 <4>ide-floppy driver 0.97.sv <6>Partition check: <6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 > <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>loop: loaded (max 8 devices) <4>ide-floppy driver 0.97.sv <6>SCSI subsystem driver Revision: 1.00 <3>request_module[scsi_hostadapter]: Root fs not mounted <3>request_module[scsi_hostadapter]: Root fs not mounted <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <4>md: autorun ... <4>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 512 buckets, 4Kbytes <4>TCP: Hash tables configured (established 8192 bind 8192) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <4>Uncompressing...................................................done. <4>Freeing initrd memory: 553k freed <4>VFS: Mounted root (ext2 filesystem). <6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <4> Vendor: IDE-CD Model: R/RW 4x4x32 Rev: 1.4B <4> Type: CD-ROM ANSI SCSI revision: 02 <4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 <4>sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray <4>FAT: bogus logical sector size 63222 <4>FAT: bogus logical sector size 63222 <4>reiserfs: checking transaction log (device 03:08) ... <4>Using r5 hash to sort names <4>reiserfs: using 3.5.x disk format <4>ReiserFS version 3.6.25 <4>VFS: Mounted root (reiserfs filesystem) readonly. <4>change_root: old root has d_count=2 <5>Trying to unmount old root ... okay <4>Freeing unused kernel memory: 124k freed <6>Adding Swap: 265032k swap-space (priority 42) Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Thu Apr 11 18:32:30 2002 fbmngplay: no process killed Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.24a (02-Sep-2001) <-------------reiserfsck, 2001-------------> reiserfsprogs 3.x.0k-pre9 /dev/hda6: clean, 31/6024 files, 4405/24066 blocks doneSetting up /lib/modules/2.4.10-4GBdone Mounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda6 on /boot type ext2 (rw) /dev/hda5 on /windows/D type vfat (rw,noexec,nosuid,nodev) doneActivating remaining swap-devices in /etc/fstab... doneSetting up the CMOS clockdone Starting ldconfig (setting up /etc/ld.so.cache)done Setting up timezone datadone Setting up loopback devicedone Setting up hostnamedone Mount SHM FS on /dev/shmdone Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports doneRunning /etc/init.d/boot.local doneCreating /var/log/boot.msg done<notice>killproc: kill(27,29) Enabling dynamic IP patchBoot logging started on /dev/tty1(/dev/console) at Thu Apr 11 16:32:46 2002 Master Resource Control: previous runlevel: N, switching to runlevel: 5 done Enabling syn flood protectiondone Disabling IP forwardingdone <notice>killproc: kill(27,3) INIT: Entering runlevel: 5 <notice>/etc/init.d/rc5.d/S01SuSEfirewall_init start <notice>'/etc/init.d/rc5.d/S01SuSEfirewall_init start' exits with status 0 <notice>/etc/init.d/rc5.d/S01dummy start <notice>'/etc/init.d/rc5.d/S01dummy start' exits with status 0 <notice>/etc/init.d/rc5.d/S01i4l_hardware start Loading ISDN drivers ... Loading AVM-B1 driver ... /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/capiutil.o Using /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/capiutil.o Symbol version prefix '' /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/kernelcapi.o Using /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/kernelcapi.o /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/capifs.o Using /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/capifs.o Symbol version prefix '' /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/capi.o Using /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/capi.o /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/net/slhc.o Using /lib/modules/2.4.10-4GB/kernel/drivers/net/slhc.o Symbol version prefix '' /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/isdn/isdn.o Using /lib/modules/2.4.10-4GB/kernel/drivers/isdn/isdn.o /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/capidrv.o Using /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/capidrv.o /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/b1.o Using /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/b1.o Symbol version prefix '' /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/b1dma.o Using /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/b1dma.o /sbin/insmod /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/b1pci.o Using /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/b1pci.o /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/b1pci.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/b1pci.o: insmod /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/b1pci.o failed # delete b1dma # delete b1 /lib/modules/2.4.10-4GB/kernel/drivers/isdn/avmb1/b1pci.o: insmod b1pci failed Initialization of the AVM-B1-PCI-module failed! <notice>'/etc/init.d/rc5.d/S01i4l_hardware start' exits with status 1 <notice>/etc/init.d/rc5.d/S01personal-firewall.initial start Starting personal-firewall (initial) [not active]unused <notice>'/etc/init.d/rc5.d/S01personal-firewall.initial start' exits with status 6 <notice>/etc/init.d/rc5.d/S01random start Initializing random number generatordone <notice>'/etc/init.d/rc5.d/S01random start' exits with status 0 <notice>/etc/init.d/rc5.d/S02dhclient start <notice>'/etc/init.d/rc5.d/S02dhclient start' exits with status 0 <notice>/etc/init.d/rc5.d/S02i4l start /dev/isdnctrl: No such device <notice>'/etc/init.d/rc5.d/S02i4l start' exits with status 0 <notice>/etc/init.d/rc5.d/S03c4l start capiinit start 1 fcpci running fritz-pci A1 3.09-10 0xB400 5 <notice>'/etc/init.d/rc5.d/S03c4l start' exits with status 0 <notice>/etc/init.d/rc5.d/S05network start Setting up network device eth0 done<notice>'/etc/init.d/rc5.d/S05network start' exits with status 0 <notice>/etc/init.d/rc5.d/S06hotplug start Starting hotplugging services [ usb ]done <notice>'/etc/init.d/rc5.d/S06hotplug start' exits with status 0 <notice>/etc/init.d/rc5.d/S07route start Setting up routing (using /etc/route.conf)done <notice>'/etc/init.d/rc5.d/S07route start' exits with status 0 <notice>/etc/init.d/rc5.d/S08SuSEfirewall_setup start <notice>'/etc/init.d/rc5.d/S08SuSEfirewall_setup start' exits with status 0 <notice>/etc/init.d/rc5.d/S08sshd start insmod: Using /lib/modules/2.4.10-4GB/kernel/drivers/usb/scanner.o insmod: Symbol version prefix '' Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=ext CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done <notice>'/etc/init.d/rc5.d/S08sshd start' exits with status 0 <notice>/etc/init.d/rc5.d/S08syslog start Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=ext CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/syslogd ] <notice>done startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=ext CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse- linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/klogd ] <notice>'/etc/init.d/rc5.d/S08syslog start' exits with status 0 <notice>/etc/init.d/rc5.d/S08xfs start <notice>'/etc/init.d/rc5.d/S08xfs start' exits with status 0 <notice>/etc/init.d/rc5.d/S09portmap start Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=ext CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/portmap ] done <notice>'/etc/init.d/rc5.d/S09portmap start' exits with status 0 <notice>/etc/init.d/rc5.d/S09splash_early start <notice>'/etc/init.d/rc5.d/S09splash_early start' exits with status 0 <notice>/etc/init.d/rc5.d/S10nfs start <notice>'/etc/init.d/rc5.d/S10nfs start' exits with status 0 <notice>/etc/init.d/rc5.d/S11apmd start <notice>'/etc/init.d/rc5.d/S11apmd start' exits with status 0 <notice>/etc/init.d/rc5.d/S11at start Starting service at daemon:<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=ext CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL= 2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/atd ] done <notice>'/etc/init.d/rc5.d/S11at start' exits with status 0 <notice>/etc/init.d/rc5.d/S11fbset start <notice>'/etc/init.d/rc5.d/S11fbset start' exits with status 0 <notice>/etc/init.d/rc5.d/S11kbd start Loading keymap qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Loading console font lat9w-16.psfu doneLoading screenmap trivial doneSetting up console ttys done<notice>'/etc/init.d/rc5.d/S11kbd start' exits with status 0 <notice>/etc/init.d/rc5.d/S11lpd start Starting lpd<notice>startproc: execve (/usr/sbin/lpd) [ /usr/sbin/lpd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=ext CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS= 104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/lpd ] done <notice>'/etc/init.d/rc5.d/S11lpd start' exits with status 0 <notice>/etc/init.d/rc5.d/S11raw start <notice>'/etc/init.d/rc5.d/S11raw start' exits with status 0 <notice>/etc/init.d/rc5.d/S11sendmail start <notice>'/etc/init.d/rc5.d/S11sendmail start' exits with status 0 <notice>/etc/init.d/rc5.d/S11smbfs start <notice>'/etc/init.d/rc5.d/S11smbfs start' exits with status 0 <notice>/etc/init.d/rc5.d/S11smpppd start <notice>'/etc/init.d/rc5.d/S11smpppd start' exits with status 0 <notice>/etc/init.d/rc5.d/S11xntpd start <notice>'/etc/init.d/rc5.d/S11xntpd start' exits with status 0 <notice>/etc/init.d/rc5.d/S11ypbind start <notice>'/etc/init.d/rc5.d/S11ypbind start' exits with status 0 <notice>/etc/init.d/rc5.d/S12autofs start <notice>'/etc/init.d/rc5.d/S12autofs start' exits with status 0 <notice>/etc/init.d/rc5.d/S12cron start Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=ext CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done <notice>'/etc/init.d/rc5.d/S12cron start' exits with status 0 <notice>/etc/init.d/rc5.d/S12fam start <notice>'/etc/init.d/rc5.d/S12fam start' exits with status 0 <notice>/etc/init.d/rc5.d/S12ksysguardd start <notice>'/etc/init.d/rc5.d/S12ksysguardd start' exits with status 0 <notice>/etc/init.d/rc5.d/S12nfsserver start <notice>'/etc/init.d/rc5.d/S12nfsserver start' exits with status 0 <notice>/etc/init.d/rc5.d/S12nscd start Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=ext CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] done <notice>'/etc/init.d/rc5.d/S12nscd start' exits with status 0 <notice>/etc/init.d/rc5.d/S12xdm start Starting service kdm<notice>startproc: execve (/opt/kde2/bin/kdm) [ /opt/kde2/bin/kdm ], [ PWD=/ BOOT_FILE=/boot/vmlinuz LC_MESSAGES= HOSTNAME=ext CONSOLE=/dev/console RC_LANG=de_DE@euro vga=0x0317 PREVLEVEL=N SUSE_DOC_HOST=localhost AUTOBOOT=YES QTDIR=/usr/lib/qt2 LC_TIME= MACHTYPE=i386-suse-linux RC_LC_COLLATE=POSIX LC_ALL= LINES=34 LANG=de_DE@euro LC_NUMERIC= SHLVL=2 COLUMNS=104 LC_CTYPE=de_DE@euro BOOT_IMAGE=linux SHELL=/bin/bash PRINTER=HP_Deskjet HOSTTYPE=i386 OSTYPE=linux WINDOWMANAGER=/usr/X11R6/bin/kde HOME=/ TERM=linux no_proxy=localhost PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 LC_MONETARY= INIT_VERSION=sysvinit-2.78 LC_COLLATE=POSIX _=/sbin/startproc DAEMON=/opt/kde2/bin/kdm ] done <notice>'/etc/init.d/rc5.d/S12xdm start' exits with status 0 <notice>/etc/init.d/rc5.d/S20inetd start <notice>'/etc/init.d/rc5.d/S20inetd start' exits with status 0 <notice>/etc/init.d/rc5.d/S21SuSEfirewall_final start <notice>'/etc/init.d/rc5.d/S21SuSEfirewall_final start' exits with status 0 <notice>/etc/init.d/rc5.d/S21alsasound start Starting sound driver: ens1371done Restoring the previous sound settingdone <notice>'/etc/init.d/rc5.d/S21alsasound start' exits with status 0 <notice>/etc/init.d/rc5.d/S21apache start Starting httpd [ ]<notice>startproc: execve (/usr/sbin/httpd) [ /usr/sbin/httpd -f /etc/httpd/httpd.conf ], [ PWD=/ DBROOT=/dev/null BOOT_FILE=/boot/vmlinuz HOSTNAME=ext CONSOLE=/dev/console LD_LIBRARY_PATH=:/lib vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 ORACLE_HOME= SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/httpd ] done <notice>'/etc/init.d/rc5.d/S21apache start' exits with status 0 <notice>/etc/init.d/rc5.d/S22personal-firewall.final start Starting personal-firewall (final) [not active]unused <notice>'/etc/init.d/rc5.d/S22personal-firewall.final start' exits with status 6 <notice>/etc/init.d/rc5.d/S22splash_late start <notice>'/etc/init.d/rc5.d/S22splash_late start' exits with status 0 Master Resource Control: runlevel 5 has been reached Failed services in runlevel 5: i4l_hardware Skipped services in runlevel 5: personal-firewall.initial personal-firewall.final <notice>killproc: kill(133,3)