Am Samstag, 26. Juni 2004 14:12 schrieb Michael Conrad:

Hallo Axel, unter dem Verzeichnis \var\spool\fax\bin sollte eine Datei mit dem Namen FaxDispatch existieren und etwa so aussehen;

# Dispatch fax to email depending on own MSN or extention (ISDN lines) # sourced from faxrcvd FILETYPE=pdf; #hier deine e-mail adresse SENDTO=deineemailadresse@dein provider.

Dann generiert Hylafx ein superschönes pdf file aus dem Fax, schickt es per e-mail und du kannst es einfach öffnen.

Schöne Grüße aus Mainz

Michael

Danke für die Hinweise, leider funktioniert es nicht :-(

notify.sh bzw. notify wie es bei mir ist sieht folgendermassen aus, so dass ich den "Filetype nicht mit angeben kann:

--------------schnipp-----------------notify....: # # notify qfile why jobtime [nextTry] # # Return mail to the submitter of a job when notification is needed. # if [ $# != 3 -a $# != 4 ]; then echo "Usage: $0 qfile why jobtime [nextTry]" exit 1 fi

test -f etc/setup.cache || { SPOOL=`pwd` cat<<EOF

FATAL ERROR: $SPOOL/etc/setup.cache is missing!

The file $SPOOL/etc/setup.cache is not present. This probably means the machine has not been setup using the faxsetup(8C) command. Read the documentation on setting up HylaFAX before you startup a server system.

EOF exit 1 } . etc/setup.cache

QFILE=$1 WHY=$2 JTIME=$3 NEXT=${4:-'??:??'}

($AWK -F: -f bin/notify.awk why=$WHY jobTime=$JTIME nextTry=$NEXT $QFILE || { echo "" echo "Sorry, there was a problem sending notification;" echo "something went wrong in the shell script $0." echo "" exit 1; } ) | 2>&1 $SENDMAIL -t -ffax -oi ------------------schnapp-----------------

Das gleiche Problem habe ich mit FaxDispatch:

schnipp------FaxDispatch-------------: # # Dispatch fax to email depending on own MSN or extention (ISDN lines) # sourced from faxrcvd # if [ "$7" != "" ]; then PHONEMATCH=$7$ USERENTRY=`grep -v "^#" etc/users | grep "$PHONEMATCH"` if [ "$USERENTRY" != "" ]; then USERNAME=`echo $USERENTRY | awk '{print $1}'` SENDTO="$USERNAME" fi fi ------------------schnapp-------------------------

Alternativ habe ich allerdings es in faxrcvd gefunden und es dort geändert:

--------------schnipp farcvd------: #! /bin/sh # $Id: faxrcvd.sh.in,v 1.9 2003/02/09 02:39:33 darren Exp $ # # HylaFAX Facsimile Software # # Copyright (c) 1990-1996 Sam Leffler # Copyright (c) 1991-1996 Silicon Graphics, Inc. # HylaFAX is a trademark of Silicon Graphics # # Permission to use, copy, modify, distribute, and sell this software and # its documentation for any purpose is hereby granted without fee, provided # that (i) the above copyright notices and this permission notice appear in # all copies of the software and related documentation, and (ii) the names of # Sam Leffler and Silicon Graphics may not be used in any advertising or # publicity relating to the software without the specific, prior written # permission of Sam Leffler and Silicon Graphics. # # THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, # EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY # WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. # # IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR # ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, # OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, # WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF # LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE # OF THIS SOFTWARE. #

# # faxrcvd file devID commID error-msg # if [ $# -lt 4 ]; then echo "Usage: $0 file devID commID error-msg [CIDNumber] [CIDName] [destination]" exit 1 fi

test -f etc/setup.cache || { SPOOL=`pwd` cat<<EOF

FATAL ERROR: $SPOOL/etc/setup.cache is missing!

The file $SPOOL/etc/setup.cache is not present. This probably means the machine has not been setup using the faxsetup(8C) command. Read the documentation on setting up HylaFAX before you startup a server system.

EOF exit 1 } . etc/setup.cache

INFO=$SBIN/faxinfo FAX2PS=$TIFFBIN/fax2ps ENCODING=base64 TIFF2PS=tiff2ps PS2PDF=ps2pdf TOADDR=axel@linux.local TIFFINFO=tiffinfo NOTIFY_FAXMASTER=always

# # wraper for base64 encoding # # first try uuencode if it is not installed fallback to # metamails mimencode if it is also not installed give an # error message # function base64 {

if [ -x /usr/bin/uuencode ]; then /usr/bin/uuencode -m $1 $1 | /usr/bin/sed '1d;$d' elif [ -x /usr/bin/mimencode ]; then /usr/bin/mimencode $1 else echo "Error: No encoder for base64 found." echo "Please install sharutils or metamail." fi }

# # Permit various types of attachment types: ps, tif, pdf # Note that non-ASCII filetypes require sharutils or metamail. # pdf requires tiff2ps and ps2pdf # FILETYPE=pdf

# # There is no good portable way to find out the fully qualified # domain name (FQDN) of the host or the TCP port for the hylafax # service so we fudge here. Folks may want to tailor this to # their needs; e.g. add a domain or use localhost so the loopback # interface is used. # HOSTNAME=`hostname` # XXX no good way to find FQDN PORT=4559 # XXX no good way to lookup service

FILE="$1" DEVICE="$2" COMMID="$3" MSG="$4" CIDNUMBER="$5" CIDNAME="$6"

FILENAME=`echo $FILE | $SED -e 's/.tif//' -e 's/recvq///'`

if [ -f $FILE ]; then # # Check the sender's TSI and setup to dispatch # facsimile received from well-known senders. # SUBADDR="`$INFO $FILE | $AWK -F: '/SubAddr/ { print $2 }' 2>/dev/null`" SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }' 2>/dev/null`" SENDTO= if [ -f bin/FaxDispatch ]; then . bin/FaxDispatch # NB: FaxDispatch sets SENDTO based on $7 fi # # Don't send FaxMaster duplicates, and FaxMaster may not even # want a message at all, depending on NOTIFY_FAXMASTER. # case $NOTIFY_FAXMASTER$MSG in never*) NOTIFY_FAXMASTER=no;; errors) NOTIFY_FAXMASTER=no;; *) NOTIFY_FAXMASTER=yes;; esac if [ "$TOADDR" != "$SENDTO" -a "$NOTIFY_FAXMASTER" != "no" ]; then (echo "To: $TOADDR" echo "From: The HylaFAX Receive Agent <fax>" echo "Subject: Facsimile received from $SENDER"; echo "" echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE echo "ReceivedOn: $DEVICE" if [ "$MSG" ]; then echo "" echo "The full document was not received because:" echo "" echo " $MSG" echo "" echo " ---- Transcript of session follows ----" echo "" if [ -f log/c$COMMID ]; then $SED -e '/-- data/d' \ -e '/start.*timer/d' -e '/stop.*timer/d' \ log/c$COMMID elif [ -n "$COMMID" ]; then echo " No transcript available (CommID c$COMMID)." else echo " No transcript available." fi else echo " CommID: c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)" fi if [ "$CIDNUMBER" ]; then echo " CIDNumber: $CIDNUMBER" fi if [ "$CIDNAME" ]; then echo " CIDName: $CIDNAME" fi if [ -n "$SENDTO" ]; then echo "" echo "The facsimile was automatically dispatched to: $SENDTO." fi ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR fi if [ -n "$SENDTO" ]; then (MIMEBOUNDARY="NextPart$$" echo "Mime-Version: 1.0" echo "Content-Type: Multipart/Mixed; Boundary="$MIMEBOUNDARY"" echo "Content-Transfer-Encoding: 7bit" echo "To: $SENDTO" echo "From: The HylaFAX Receive Agent <fax>" echo "Subject: Facsimile received from $SENDER"; echo "" echo "--$MIMEBOUNDARY" echo "Content-Type: text/plain; charset=us-ascii" echo "Content-Transfer-Encoding: 7bit" echo "" echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE echo "ReceivedOn: $DEVICE" if [ "$MSG" ]; then echo "" echo "The full document was not received because:" echo "" echo " $MSG" echo "" echo " ---- Transcript of session follows ----" echo "" if [ -f log/c$COMMID ]; then $SED -e '/-- data/d' \ -e '/start.*timer/d' -e '/stop.*timer/d' \ log/c$COMMID elif [ -n "$COMMID" ]; then echo " No transcript available (CommID c$COMMID)." else echo " No transcript available." fi else echo " CommID: c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)" fi if [ "$CIDNUMBER" ]; then echo " CIDNumber: $CIDNUMBER" fi if [ "$CIDNAME" ]; then echo " CIDName: $CIDNAME" fi echo "" echo "--$MIMEBOUNDARY" if [ "$FILETYPE" = "tif" ]; then echo "Content-Type: image/tiff; name="$FILENAME.tif"" echo "Content-Description: FAX document" echo "Content-Transfer-Encoding: $ENCODING" echo "Content-Disposition: attachment; filename="$FILENAME.tif"" echo "" base64 $FILE 2>/dev/null elif [ "$FILETYPE" = "pdf" ]; then echo "Content-Type: application/pdf; name="c$COMMID.pdf"" echo "Content-Description: FAX document" echo "Content-Transfer-Encoding: $ENCODING" echo "Content-Disposition: attachment; filename="c$COMMID.pdf"" echo "" GW=`$TIFFINFO $FILE | $GREP "Image Width" | \ $SED 's/.*Image Width: ([0-9]*).*/\1/g' | sort -n | $SED -n '$p'` GL=`$TIFFINFO $FILE | $GREP "Image Length" | \ $SED 's/.*Image Length: ([0-9]*).*/\1/g' | sort -n | $SED -n '$p'` RW=`$TIFFINFO $FILE | $GREP "Resolution" | \ $SED 's/.*Resolution: ([0-9]*).*/\1/g' | sort -n | $SED -n '$p'` RL=`$TIFFINFO $FILE | $GREP "Resolution" | \ $SED 's/.*Resolution: [0-9]*, ([0-9]*).*/\1/g' | sort -n | $SED -n '$p'` $TIFF2PS -a -O $FILE.ps $FILE 2>/dev/null # fax2ps looks bad $PS2PDF -g$GW\x$GL -r$RW\x$RL $FILE.ps $FILE.pdf 2>/dev/null base64 $FILE.pdf 2>/dev/null $RM -f $FILE.ps $FILE.pdf 2>/dev/null else # default as Postscript echo "Content-Type: application/postscript; name="$FILENAME.ps"" echo "Content-Description: FAX document" echo "Content-Transfer-Encoding: 7bit" echo "Content-Disposition: attachment; filename="$FILENAME.ps"" echo "" $FAX2PS $FILE 2>/dev/null fi echo "" echo "--$MIMEBOUNDARY--" ) | 2>&1 $SENDMAIL -ffax -oi $SENDTO fi else # # Generate notification mail for a failed attempt. # (echo "To: $TOADDR" echo "From: The HylaFAX Receive Agent <fax>" echo "Subject: facsimile not received" echo "" echo "An attempt to receive facsimile on $DEVICE failed because:" echo "" echo " $MSG" echo "" echo " ---- Transcript of session follows ----" echo "" if [ -f log/c$COMMID ]; then $SED -e '/-- data/d' \ -e '/start.*timer/d' -e '/stop.*timer/d' \ log/c$COMMID elif [ -n "$COMMID" ]; then echo " No transcript available (CommID c$COMMID)." else echo " No transcript available." fi ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR fi -----------------schnapp--------------------------------

Weiß jemand was hier schief läuft??? Danke Ns.: Hylafax aus SuSE 9.0( bei der 8.1 ging es wirklich so :-( ) Gruß Axel

Hallo Axel hast Du von hylafax das faxsetup richtig gemacht? Der Fehler "FATAL ERROR: $SPOOL/etc/setup.cache is missing!" deutet darauf hin das beim faxsetup etwas nicht richtig gelaufen sein kann. Gehe davon aus, das du 9.0 hast. Wenn du eine detailierte Installationsanleitung willst, kann ich dir eine schicken.

Gruß,

Michael

-----Ursprüngliche Nachricht----- Von: Axel Lindlau [mailto:watnu@tiscali.de] Gesendet: Sonntag, 27. Juni 2004 08:38 An: suse-isdn@suse.com Betreff: Re: AW: [suse-isdn] Hylafax....und ftp auf eigenen Rechner

Am Samstag, 26. Juni 2004 14:12 schrieb Michael Conrad:

Hallo Axel, unter dem Verzeichnis \var\spool\fax\bin sollte eine Datei mit dem Namen FaxDispatch existieren und etwa so aussehen;

# Dispatch fax to email depending on own MSN or extention (ISDN lines) # sourced from faxrcvd FILETYPE=pdf; #hier deine e-mail adresse SENDTO=deineemailadresse@dein provider.

Dann generiert Hylafx ein superschönes pdf file aus dem Fax, schickt es

per

e-mail und du kannst es einfach öffnen.

Schöne Grüße aus Mainz

Michael

Danke für die Hinweise, leider funktioniert es nicht :-(

notify.sh bzw. notify wie es bei mir ist sieht folgendermassen aus, so dass ich den "Filetype nicht mit angeben kann:

--------------schnipp-----------------notify....: # # notify qfile why jobtime [nextTry] # # Return mail to the submitter of a job when notification is needed. # if [ $# != 3 -a $# != 4 ]; then echo "Usage: $0 qfile why jobtime [nextTry]" exit 1 fi

test -f etc/setup.cache || { SPOOL=`pwd` cat<<EOF

FATAL ERROR: $SPOOL/etc/setup.cache is missing!

The file $SPOOL/etc/setup.cache is not present. This probably means the machine has not been setup using the faxsetup(8C) command. Read the documentation on setting up HylaFAX before you startup a server system.

EOF exit 1 } . etc/setup.cache

QFILE=$1 WHY=$2 JTIME=$3 NEXT=${4:-'??:??'}

($AWK -F: -f bin/notify.awk why=$WHY jobTime=$JTIME nextTry=$NEXT $QFILE || { echo "" echo "Sorry, there was a problem sending notification;" echo "something went wrong in the shell script $0." echo "" exit 1; } ) | 2>&1 $SENDMAIL -t -ffax -oi ------------------schnapp-----------------

Das gleiche Problem habe ich mit FaxDispatch:

schnipp------FaxDispatch-------------: # # Dispatch fax to email depending on own MSN or extention (ISDN lines) # sourced from faxrcvd # if [ "$7" != "" ]; then PHONEMATCH=$7$ USERENTRY=`grep -v "^#" etc/users | grep "$PHONEMATCH"` if [ "$USERENTRY" != "" ]; then USERNAME=`echo $USERENTRY | awk '{print $1}'` SENDTO="$USERNAME" fi fi ------------------schnapp-------------------------

Alternativ habe ich allerdings es in faxrcvd gefunden und es dort geändert:

--------------schnipp farcvd------: #! /bin/sh # $Id: faxrcvd.sh.in,v 1.9 2003/02/09 02:39:33 darren Exp $ # # HylaFAX Facsimile Software # # Copyright (c) 1990-1996 Sam Leffler # Copyright (c) 1991-1996 Silicon Graphics, Inc. # HylaFAX is a trademark of Silicon Graphics # # Permission to use, copy, modify, distribute, and sell this software and # its documentation for any purpose is hereby granted without fee, provided # that (i) the above copyright notices and this permission notice appear in # all copies of the software and related documentation, and (ii) the names of # Sam Leffler and Silicon Graphics may not be used in any advertising or # publicity relating to the software without the specific, prior written # permission of Sam Leffler and Silicon Graphics. # # THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, # EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY # WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. # # IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR # ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, # OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, # WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF # LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE # OF THIS SOFTWARE. #

# # faxrcvd file devID commID error-msg # if [ $# -lt 4 ]; then echo "Usage: $0 file devID commID error-msg [CIDNumber] [CIDName] [destination]" exit 1 fi

test -f etc/setup.cache || { SPOOL=`pwd` cat<<EOF

FATAL ERROR: $SPOOL/etc/setup.cache is missing!

The file $SPOOL/etc/setup.cache is not present. This probably means the machine has not been setup using the faxsetup(8C) command. Read the documentation on setting up HylaFAX before you startup a server system.

EOF exit 1 } . etc/setup.cache

INFO=$SBIN/faxinfo FAX2PS=$TIFFBIN/fax2ps ENCODING=base64 TIFF2PS=tiff2ps PS2PDF=ps2pdf TOADDR=axel@linux.local TIFFINFO=tiffinfo NOTIFY_FAXMASTER=always

# # wraper for base64 encoding # # first try uuencode if it is not installed fallback to # metamails mimencode if it is also not installed give an # error message # function base64 {

if [ -x /usr/bin/uuencode ]; then /usr/bin/uuencode -m $1 $1 | /usr/bin/sed '1d;$d' elif [ -x /usr/bin/mimencode ]; then /usr/bin/mimencode $1 else echo "Error: No encoder for base64 found." echo "Please install sharutils or metamail." fi }

# # Permit various types of attachment types: ps, tif, pdf # Note that non-ASCII filetypes require sharutils or metamail. # pdf requires tiff2ps and ps2pdf # FILETYPE=pdf

# # There is no good portable way to find out the fully qualified # domain name (FQDN) of the host or the TCP port for the hylafax # service so we fudge here. Folks may want to tailor this to # their needs; e.g. add a domain or use localhost so the loopback # interface is used. # HOSTNAME=`hostname` # XXX no good way to find FQDN PORT=4559 # XXX no good way to lookup service

FILE="$1" DEVICE="$2" COMMID="$3" MSG="$4" CIDNUMBER="$5" CIDNAME="$6"

FILENAME=`echo $FILE | $SED -e 's/.tif//' -e 's/recvq///'`

if [ -f $FILE ]; then # # Check the sender's TSI and setup to dispatch # facsimile received from well-known senders. # SUBADDR="`$INFO $FILE | $AWK -F: '/SubAddr/ { print $2 }' 2>/dev/null`" SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }' 2>/dev/null`" SENDTO= if [ -f bin/FaxDispatch ]; then . bin/FaxDispatch # NB: FaxDispatch sets SENDTO based on $7 fi # # Don't send FaxMaster duplicates, and FaxMaster may not even # want a message at all, depending on NOTIFY_FAXMASTER. # case $NOTIFY_FAXMASTER$MSG in never*) NOTIFY_FAXMASTER=no;; errors) NOTIFY_FAXMASTER=no;; *) NOTIFY_FAXMASTER=yes;; esac if [ "$TOADDR" != "$SENDTO" -a "$NOTIFY_FAXMASTER" != "no" ]; then (echo "To: $TOADDR" echo "From: The HylaFAX Receive Agent <fax>" echo "Subject: Facsimile received from $SENDER"; echo "" echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE echo "ReceivedOn: $DEVICE" if [ "$MSG" ]; then echo "" echo "The full document was not received because:" echo "" echo " $MSG" echo "" echo " ---- Transcript of session follows ----" echo "" if [ -f log/c$COMMID ]; then $SED -e '/-- data/d' \ -e '/start.*timer/d' -e '/stop.*timer/d' \ log/c$COMMID elif [ -n "$COMMID" ]; then echo " No transcript available (CommID c$COMMID)." else echo " No transcript available." fi else echo " CommID: c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)" fi if [ "$CIDNUMBER" ]; then echo " CIDNumber: $CIDNUMBER" fi if [ "$CIDNAME" ]; then echo " CIDName: $CIDNAME" fi if [ -n "$SENDTO" ]; then echo "" echo "The facsimile was automatically dispatched to: $SENDTO." fi ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR fi if [ -n "$SENDTO" ]; then (MIMEBOUNDARY="NextPart$$" echo "Mime-Version: 1.0" echo "Content-Type: Multipart/Mixed; Boundary="$MIMEBOUNDARY"" echo "Content-Transfer-Encoding: 7bit" echo "To: $SENDTO" echo "From: The HylaFAX Receive Agent <fax>" echo "Subject: Facsimile received from $SENDER"; echo "" echo "--$MIMEBOUNDARY" echo "Content-Type: text/plain; charset=us-ascii" echo "Content-Transfer-Encoding: 7bit" echo "" echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE echo "ReceivedOn: $DEVICE" if [ "$MSG" ]; then echo "" echo "The full document was not received because:" echo "" echo " $MSG" echo "" echo " ---- Transcript of session follows ----" echo "" if [ -f log/c$COMMID ]; then $SED -e '/-- data/d' \ -e '/start.*timer/d' -e '/stop.*timer/d' \ log/c$COMMID elif [ -n "$COMMID" ]; then echo " No transcript available (CommID c$COMMID)." else echo " No transcript available." fi else echo " CommID: c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)" fi if [ "$CIDNUMBER" ]; then echo " CIDNumber: $CIDNUMBER" fi if [ "$CIDNAME" ]; then echo " CIDName: $CIDNAME" fi echo "" echo "--$MIMEBOUNDARY" if [ "$FILETYPE" = "tif" ]; then echo "Content-Type: image/tiff; name="$FILENAME.tif"" echo "Content-Description: FAX document" echo "Content-Transfer-Encoding: $ENCODING" echo "Content-Disposition: attachment; filename="$FILENAME.tif"" echo "" base64 $FILE 2>/dev/null elif [ "$FILETYPE" = "pdf" ]; then echo "Content-Type: application/pdf; name="c$COMMID.pdf"" echo "Content-Description: FAX document" echo "Content-Transfer-Encoding: $ENCODING" echo "Content-Disposition: attachment; filename="c$COMMID.pdf"" echo "" GW=`$TIFFINFO $FILE | $GREP "Image Width" | \ $SED 's/.*Image Width: ([0-9]*).*/\1/g' | sort -n | $SED -n '$p'` GL=`$TIFFINFO $FILE | $GREP "Image Length" | \ $SED 's/.*Image Length: ([0-9]*).*/\1/g' | sort -n | $SED -n '$p'` RW=`$TIFFINFO $FILE | $GREP "Resolution" | \ $SED 's/.*Resolution: ([0-9]*).*/\1/g' | sort -n | $SED -n '$p'` RL=`$TIFFINFO $FILE | $GREP "Resolution" | \ $SED 's/.*Resolution: [0-9]*, ([0-9]*).*/\1/g' | sort -n | $SED -n '$p'` $TIFF2PS -a -O $FILE.ps $FILE 2>/dev/null # fax2ps looks bad $PS2PDF -g$GW\x$GL -r$RW\x$RL $FILE.ps $FILE.pdf 2>/dev/null base64 $FILE.pdf 2>/dev/null $RM -f $FILE.ps $FILE.pdf 2>/dev/null else # default as Postscript echo "Content-Type: application/postscript; name="$FILENAME.ps"" echo "Content-Description: FAX document" echo "Content-Transfer-Encoding: 7bit" echo "Content-Disposition: attachment; filename="$FILENAME.ps"" echo "" $FAX2PS $FILE 2>/dev/null fi echo "" echo "--$MIMEBOUNDARY--" ) | 2>&1 $SENDMAIL -ffax -oi $SENDTO fi else # # Generate notification mail for a failed attempt. # (echo "To: $TOADDR" echo "From: The HylaFAX Receive Agent <fax>" echo "Subject: facsimile not received" echo "" echo "An attempt to receive facsimile on $DEVICE failed because:" echo "" echo " $MSG" echo "" echo " ---- Transcript of session follows ----" echo "" if [ -f log/c$COMMID ]; then $SED -e '/-- data/d' \ -e '/start.*timer/d' -e '/stop.*timer/d' \ log/c$COMMID elif [ -n "$COMMID" ]; then echo " No transcript available (CommID c$COMMID)." else echo " No transcript available." fi ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR fi -----------------schnapp--------------------------------

Weiß jemand was hier schief läuft??? Danke Ns.: Hylafax aus SuSE 9.0( bei der 8.1 ging es wirklich so :-( ) Gruß Axel

-- Um die Liste abzubestellen, schicken Sie eine Mail an: suse-isdn-unsubscribe@suse.com Um eine Liste aller verfügbaren Kommandos zu bekommen, schicken Sie eine Mail an: suse-isdn-help@suse.com