Re: [suse-isdn] SuSEfirewall2 hängt nach erneuter Einwahl mit ippp0"
Trag in /etc/sysconfig/isdn/cfg-net0
FIREWALL="yes"
ein, danach SuSEconfig --module isdn
gesagt getan, folgendes passiert jetzt ! Kennt man das ?
(
- Meldungen beim booten (dauert ewig !)
ifup-route: Error while excuting:
ifup-route: Command 'ip route replace to 192.168.0.2/24 via
192.168.0.1' returned:
ifup-route: RTNETLINK answers: Invalid argument
MEHR SIEHE UNTEN (BOOT.log)
- Clients und server pingen nach dem booten ins netz,
- nach time out können sich die Cllients einwählen, der server nicht.
- viele SuSE-FW-ILLEGAL-TARGET meldungen MEHR SIEHE UNTEN MEssage.log
- nach neustaht der firewall ist alles ok !
)
Hier die massage.log vom prozess :
[..]
Jan 24 08:46:49 marvin kernel: SuSE-FW-ACCEPT IN=ippp0 OUT= MAC=
SRC=213.165.64.102 DST=217.0.60.123 LEN=52 TOS=0x08 PREC=0x00 TTL=58
ID=51566 DF PROTO=TCP SPT=80 DPT=1197 WINDOW=6798 RES=0x00 ACK URGP=0 OPT
(0101080A125E232B0004518F)
Jan 24 08:47:15 marvin kernel: SuSE-FW-DROP-DEFAULT IN=ippp0 OUT= MAC=
SRC=61.142.56.149 DST=217.0.60.123 LEN=78 TOS=0x00 PREC=0x00 TTL=116
ID=46421 PROTO=UDP SPT=1025 DPT=137 LEN=58
Jan 24 08:47:28 marvin isdnlog: Jan 24 08:47:28 tei 98 calling 0191011
with +49 4161/557862, Buxtehude 9.CI 0.133 EUR (after 0:08:04)
Jan 24 08:48:28 marvin isdnlog: Jan 24 08:48:28 tei 98 calling 0191011
with +49 4161/557862, Buxtehude 10.CI 0.148 EUR (after 0:09:04)
Jan 24 08:49:28 marvin isdnlog: Jan 24 08:49:28 tei 98 calling 0191011
with +49 4161/557862, Buxtehude 11.CI 0.163 EUR (after 0:10:04)
Jan 24 08:50:28 marvin isdnlog: Jan 24 08:50:28 tei 98 calling 0191011
with +49 4161/557862, Buxtehude 12.CI 0.178 EUR (after 0:11:04)
Jan 24 08:51:28 marvin isdnlog: Jan 24 08:51:28 tei 98 calling 0191011
with +49 4161/557862, Buxtehude 13.CI 0.193 EUR (after 0:12:04)
Jan 24 08:52:16 marvin kernel: isdn_net: Hupflags of ippp0 are 5
Jan 24 08:52:16 marvin kernel: isdn_net: local hangup ippp0
Jan 24 08:52:16 marvin kernel: ippp0: Chargesum is 0
Jan 24 08:52:16 marvin ipppd[537]: Modem hangup
Jan 24 08:52:16 marvin ipppd[537]: Connection terminated.
Jan 24 08:52:16 marvin ipppd[537]: taking down PHASE_DEAD link 0,
linkunit: 0
Jan 24 08:52:16 marvin ipppd[537]: sent [0][LCP TermReq id=0x3 6c 69 6e 6b
20 63 6c 6f 73 65 64]
Jan 24 08:52:16 marvin ipppd[537]: LCP is down
Jan 24 08:52:16 marvin ipppd[537]: closing fd 6 from unit 0
Jan 24 08:52:16 marvin ipppd[537]: link 0 closed , linkunit: 0
Jan 24 08:52:16 marvin ipppd[537]: reinit_unit: 0
Jan 24 08:52:16 marvin kernel: ippp, open, slot: 2, minor: 0, state: 0000
Jan 24 08:52:16 marvin kernel: ippp_ccp: allocated reset data structure
d0795000
Jan 24 08:52:16 marvin ipppd[537]: Connect[0]: /dev/ippp0, fd: 6
Jan 24 08:52:16 marvin kernel: ippp_ccp: freeing reset data structure
c306a800
Jan 24 08:52:16 marvin kernel: kcapi: appl 1 ncci 0x10101 down
Jan 24 08:52:16 marvin isdnlog: Jan 24 08:52:16 tei 98 calling 0191011
with +49 4161/557862, Buxtehude HANGUP (13 CI 0.193 EUR 0:12:52
I=729.8Kb O=136.4Kb)
Jan 24 08:52:16 marvin kernel: capidrv-1: DISCONNECT_IND reason 0x3400
(No
additional information) for plci 0x101
Jan 24 08:52:16 marvin modify_resolvconf: restored
/etc/resolv.conf.saved.by.ipppd.ippp0 to /etc/resolv.conf
Jan 24 08:52:16 marvin ifup-route: Warning: Could not set up default route
via interface ippp0
Jan 24 08:52:16 marvin ifup-route: Command 'ip route replace to
default via 62.255.253.197' returned:
Jan 24 08:52:16 marvin ifup-route: . "RTNETLINK answers: Network is
unreachable"
Jan 24 08:52:16 marvin ifup-route: Configuration line: default
62.255.253.197 - -
Jan 24 08:52:16 marvin ifup-route: This needs NOT to be AN ERROR if
you set up multiple interfaces.
Jan 24 08:52:16 marvin ifup-route: See 'man 5 routes' how to avoid
this warning.
Jan 24 08:52:16 marvin ifup-route:
Jan 24 08:52:21 marvin isdnlog: Jan 24 08:52:21 * tei 98 calling 0191011
with +49 4161/557862, Buxtehude RING (Data)
Jan 24 08:52:21 marvin kernel: ippp0: dialing 1 0191011...
Jan 24 08:52:23 marvin isdnlog: Jan 24 08:52:23 tei 98 calling 0191011
with +49 4161/557862, Buxtehude Time:Fri Jan 24 08:47:00 2003
Jan 24 08:52:23 marvin isdnlog: Jan 24 08:52:23 tei 98 calling 0191011
with +49 4161/557862, Buxtehude COLP *INVALID* -- ignored!
Jan 24 08:52:23 marvin isdnlog: Jan 24 08:52:23 tei 98 calling 0191011
with +49 4161/557862, Buxtehude CONNECT (Data)
Jan 24 08:52:23 marvin isdnlog: Jan 24 08:52:23 tei 98 calling 0191011
with +49 4161/557862, Buxtehude INTERFACE ippp0 calling 0191011
Jan 24 08:52:23 marvin isdnlog: Jan 24 08:52:23 tei 98 calling 0191011
with +49 4161/557862, Buxtehude CHARGE: 0.015 EUR/60s = 0.015 EUR/Min
(DTAG T-ISDN Standard, T-Online, t?lich, eco)
Jan 24 08:52:23 marvin isdnlog: Jan 24 08:52:23 tei 98 calling 0191011
with +49 4161/557862, Buxtehude 1.CI 0.015 EUR (now)
Jan 24 08:52:23 marvin isdnlog: Jan 24 08:52:23 tei 98 calling 0191011
with +49 4161/557862, Buxtehude NEXT CI AFTER 01:00 (DTAG T-ISDN
Standard, T-Online, t?lich, eco)
Jan 24 08:52:23 marvin kernel: kcapi: appl 1 ncci 0x10101 up
Jan 24 08:52:23 marvin kernel: isdn_net: ippp0 connected
Jan 24 08:52:23 marvin kernel: capidrv-1: chan 0 up with ncci 0x10101
Jan 24 08:52:23 marvin ipppd[537]: Local number: 04161557862, Remote
number: 0191011, Type: outgoing
Jan 24 08:52:23 marvin ipppd[537]: PHASE_WAIT -> PHASE_ESTABLISHED,
ifunit: 0, linkunit: 0, fd: 6
Jan 24 08:52:23 marvin ipppd[537]: sent [0][LCP ConfReq id=0x1
On Thu, Jan 23, 2003 at 03:01:38AM +0100, KaiU@gmx.de wrote:
Danke für deine Antwort, Das Feld kann ich nicht an klicken ! Warum ? Kai
On Thu, Jan 23, 2003 at 12:53:08AM +0100, KaiU@gmx.de wrote:
Hey Mark,
ich habe siese mail aus der newsgroup, und es schein als hätte ich das gleiche problem unter suse 8.1 ! Die lösung hört sich einfach an, jedoch wo ist das "Firewall Kaestchen beim Provider config" ?
Im Menue Verbindungsparameter unter dem Frame mit den DNS Addressen.
(yast->isdn ->aendern ->Bearbeiten (unten) -> Provider -> Weiter)
Trag in /etc/sysconfig/isdn/cfg-net0
FIREWALL="yes"
ein, danach SuSEconfig --module isdn
-- Karsten Keil SuSE Labs ISDN development
participants (1)
-
KaiU@gmx.de