<color><param>0100,0100,0100</param>Nach tausenden stunden arbeit, hab ich das vbox soweit hinbekommen das es sich ohne fehler startet und auf einen anruf wartet allerdings wenn ein anruf kommt arbeitet er sich erstmal durch die cfgs ohne fehler startet dann das tcl script sendet ata an die fritz card und dann gibts nen error ich hab keinen plan wodran das liegen kann ich hab hier ne fritz card (avm a1) die sollte ohne probleme mit vbox laufen.hier ein auszug aus der log datei: <FontFamily><param>Courier Neu</param>16-Apr 17:32:35 <<I> Initializing modem port (voice mode; 1500 ms)... 16-Apr 17:32:36 <<D> Hangup modem (drop dtr 800 ms)... 16-Apr 17:32:36 <<D> Flushing modem (timeout)... 16-Apr 17:32:37 <<J> Setting modem speed to 57600... 16-Apr 17:32:37 <<J> Setting modem flow control (HARD)... 16-Apr 17:32:37 <<D> Flushing modem... 16-Apr 17:32:37 <<D> Sending "ATZ&B512&E5"... 16-Apr 17:32:37 <<J> Reading modem echo (4 secs timeout)... 16-Apr 17:32:37 <<J> Reading modem input (4 secs timeout)... 16-Apr 17:32:37 <<D> Waiting for "OK"... Got it. 16-Apr 17:32:37 <<D> Flushing modem... 16-Apr 17:32:37 <<D> Sending "AT+FCLASS=8"... 16-Apr 17:32:37 <<J> Reading modem echo (4 secs timeout)... 16-Apr 17:32:37 <<J> Reading modem input (4 secs timeout)... 16-Apr 17:32:37 <<D> Waiting for "OK|VCON"... Got "OK" (1). 16-Apr 17:32:37 <<D> Flushing modem... 16-Apr 17:32:37 <<D> Sending "ATS13.2=1S13.4=1"... 16-Apr 17:32:37 <<J> Reading modem echo (4 secs timeout)... 16-Apr 17:32:37 <<J> Reading modem input (4 secs timeout)... 16-Apr 17:32:37 <<D> Waiting for "OK|VCON"... Got "OK" (1). 16-Apr 17:32:37 <<D> Flushing modem... 16-Apr 17:32:37 <<I> Waiting... 16-Apr 17:34:36 <<I> Wakeup! 16-Apr 17:34:36 <<D> Checking free space on "/var/spool/vbox/green"... 16-Apr 17:34:36 <<J> 253100032 bytes available; 2000000 bytes needed... enough. 16-Apr 17:34:36 <<D> Getting number of rings to wait before answer call... 16-Apr 17:34:36 <<J> Jumping to section "[RINGS]"... 16-Apr 17:34:36 <<D> Parsing time(s) "*"... 16-Apr 17:34:36 <<D> Range **:**:** - **:**:** (17:34:36): match. 16-Apr 17:34:36 <<D> Parsing day(s) "*"... 16-Apr 17:34:36 <<D> Range *: match. 16-Apr 17:34:36 <<D> Call will be answered after 5 rings... 16-Apr 17:34:36 <<J> Reading modem input (6 secs timeout)... 16-Apr 17:34:36 <<I> [ 1/ 5] RING... 16-Apr 17:34:36 <<J> Reading modem input (6 secs timeout)... 16-Apr 17:34:36 <<D> Flushing modem... 16-Apr 17:34:36 <<D> Sending "ATS20?"... 16-Apr 17:34:36 <<J> Reading modem echo (4 secs timeout)... 16-Apr 17:34:36 <<J> Reading modem input (4 secs timeout)... 16-Apr 17:34:36 <<D> Got s-register value "1". 16-Apr 17:34:36 <<D> Searching user with caller number "0"... 16-Apr 17:34:36 <<J> Jumping to section "[CALLERIDS]"... 16-Apr 17:34:36 <<D> Caller number match user "*** Unknown ***"... 16-Apr 17:34:36 <<D> Section "[STANDARD]" will be used... 16-Apr 17:34:36 <<D> Parsing settings from section "[STANDARD]"... 16-Apr 17:34:36 <<J> Jumping to section "[STANDARD]"... 16-Apr 17:34:36 <<D> Parsing time(s) "*"... 16-Apr 17:34:36 <<D> Range **:**:** - **:**:** (17:34:36): match. 16-Apr 17:34:36 <<D> Parsing day(s) "*"... 16-Apr 17:34:36 <<D> Range *: match. 16-Apr 17:34:36 <<J> Found Flag "RINGS=5"... 16-Apr 17:34:36 <<J> Settings: Message "/var/spool/vbox/green/messages/standard.msg". 16-Apr 17:34:36 <<J> Settings: Beep "/var/spool/vbox/green/messages/beep.msg". 16-Apr 17:34:36 <<J> Settings: Timeout "/var/spool/vbox/green/messages/timeout.msg". 16-Apr 17:34:36 <<J> Settings: Script "/var/spool/vbox/green/standard.tcl". 16-Apr 17:34:36 <<J> Settings: Rings changed to 5. 16-Apr 17:34:36 <<J> Settings: 90 secs record time. 16-Apr 17:34:36 <<J> Settings: Answer call. 16-Apr 17:34:36 <<J> Settings: Record a message. 16-Apr 17:34:36 <<J> Settings: Play standard message. 16-Apr 17:34:36 <<J> Settings: Play beep message. 16-Apr 17:34:36 <<J> Settings: Play timeout message. 16-Apr 17:34:36 <<I> [ 1/ 5] CALLER NUMBER: 0 (*** Unknown ***)... 16-Apr 17:34:36 <<J> Reading modem input (6 secs timeout)... 16-Apr 17:34:36 <<I> Control file "vboxctrl-answerall" exists - answering now... 16-Apr 17:34:36 <<D> Initializing tcl script "/var/spool/vbox/green/standard.tcl"... 16-Apr 17:34:36 <<D> Answering call... 16-Apr 17:34:36 <<D> Flushing modem... 16-Apr 17:34:36 <<D> Sending "ATA"... 16-Apr 17:34:36 <<J> Reading modem echo (4 secs timeout)... 16-Apr 17:34:36 <<J> Reading modem input (4 secs timeout)... <color><param>FF00,0000,0000</param>16-Apr 17:34:40 <<J> Modem timeout function called... 16-Apr 17:34:40 <<J> Can't read from modem [0] (timeout). 16-Apr 17:34:40 <<E> Can't read modem command result. 16-Apr 17:34:40 <<D> Flushing modem (timeout)... 16-Apr 17:34:40 <<F> Can't answer call! 16-Apr 17:34:40 <<D> Freeing tcl interpreter... 16-Apr 17:34:40 <<E> General tcl problem - setting flag to quit program...<color><param>0100,0100,0100</param> 16-Apr 17:34:40 <<D> Hangup modem (drop dtr 800 ms)... 16-Apr 17:34:40 <<D> Flushing modem (timeout)... 16-Apr 17:34:41 <<D> Blocking all signals (0-64)... 16-Apr 17:34:41 <<I> Exit program on signal 15... 16-Apr 17:34:41 <<D> Hangup modem (drop dtr 800 ms)... 16-Apr 17:34:41 <<D> Flushing modem (timeout)... 16-Apr 17:34:42 <<D> Closing modem port (4)... 16-Apr 17:34:42 <<D> Unlocking vboxgetty (/var/run/vboxgetty- ttyI6.pid)... 16-Apr 17:34:42 <<W> Can't remove lock "/var/run/vboxgetty-ttyI6.pid". 16-Apr 17:34:42 <<D> Unlocking modem port (/var/lock/LCK..ttyI6)... 16-Apr 17:34:42 <<W> Can't remove lock "/var/lock/LCK..ttyI6". 16-Apr 17:34:42 <<I> ------------------------[End session]----------------------- Weis da jemand ne lösung? Florian<FontFamily><param>Arial</param>