Karsten Keil wrote:

On Mon, Jun 07, 2004 at 02:51:54PM +0200, Benjamin Zeller wrote:

...

...

killall isdnlog hisaxctrl contr0 11 0xf4f hisaxctrl contr0 1 0xffff

cat /dev/isdnctrl > ilog

Einwahlversuch starten.

cat ilog:

73:50.88 l1 debugging flags card 1 set to f4f 75:04.98 debugging flags card 1 set to ffff 82:09.10 Ch0 LL->HL SETL2 card 1 3 82:09.10 Ch0 LL->HL SETL3 card 1 0 82:09.10 Ch0 LL->HL DIAL 911496 -> 08009676383 (7,0) 82:09.10 Ch0 callc State ST_NULL Event EV_DIAL 82:09.10 Ch0 callc ChangeState ST_OUT_DIAL 82:09.10 L3DC State ST_L3_LC_ESTAB_WAIT Event EV_ESTABLISH_REQ no routine 82:49.10 L3DC State ST_L3_LC_ESTAB_WAIT Event EV_ESTABLISH_REQ no routine 83:29.10 L3DC State ST_L3_LC_ESTAB_WAIT Event EV_ESTABLISH_REQ no routine 83:29.10 Ch0 callc State ST_OUT_DIAL Event EV_NOSETUP_RSP 83:29.10 Ch0 HL->LL STAT_DHUP 83:29.10 Ch0 callc ChangeState ST_NULL 83:35.10 Ch0 LL->HL SETL2 card 1 3 83:35.10 Ch0 LL->HL SETL3 card 1 0 83:35.10 Ch0 LL->HL HANGUP 83:35.10 Ch0 callc State ST_NULL Event EV_HANGUP no routine

Zu spaet, das log sollte vor einem ersten Versuch gestartet werden, hier ist der interessante Teil schon gelaufen, in jedem Fall ist es so, das der S0 nicht aktiviert werden kann und ich tippe auf IRQ Probleme, weil wenn z.B: das Kabel kaputt waer, würden trotzdem bei jedem Versuch IRQs erzeugt werden.

den cat hab ich vor "isdnctrl dial ippp0" gemacht... Habs nochmal gemacht: 55:29.66 Ch0 LL->HL SETL2 card 1 3 55:29.66 Ch0 LL->HL SETL3 card 1 0 55:29.66 Ch0 LL->HL DIAL 911496 -> 08009676383 (7,0) 55:29.66 Ch0 callc State ST_NULL Event EV_DIAL 55:29.66 Ch0 callc ChangeState ST_OUT_DIAL 55:29.66 L3DC State ST_L3_LC_ESTAB_WAIT Event EV_ESTABLISH_REQ no routine 56:09.66 L3DC State ST_L3_LC_ESTAB_WAIT Event EV_ESTABLISH_REQ no routine 56:49.66 L3DC State ST_L3_LC_ESTAB_WAIT Event EV_ESTABLISH_REQ no routine 56:49.66 Ch0 callc State ST_OUT_DIAL Event EV_NOSETUP_RSP 56:49.66 Ch0 HL->LL STAT_DHUP 56:49.66 Ch0 callc ChangeState ST_NULL 56:55.66 Ch0 LL->HL SETL2 card 1 3 56:55.66 Ch0 LL->HL SETL3 card 1 0 56:55.66 Ch0 LL->HL HANGUP 56:55.66 Ch0 callc State ST_NULL Event EV_HANGUP no routine 70:18.48 debugging flags card 1 set to ffff 72:48.79 l1 debugging flags card 1 set to f4f 79:03.10 Ch0 LL->HL SETL2 card 1 3 79:03.10 Ch0 LL->HL SETL3 card 1 0 79:03.10 Ch0 LL->HL DIAL 911496 -> 08009676383 (7,0) 79:03.10 Ch0 callc State ST_NULL Event EV_DIAL 79:03.10 Ch0 callc ChangeState ST_OUT_DIAL 79:03.10 L3DC State ST_L3_LC_ESTAB_WAIT Event EV_ESTABLISH_REQ no routine 79:43.10 L3DC State ST_L3_LC_ESTAB_WAIT Event EV_ESTABLISH_REQ no routine 80:23.10 L3DC State ST_L3_LC_ESTAB_WAIT Event EV_ESTABLISH_REQ no routine 80:23.10 Ch0 callc State ST_OUT_DIAL Event EV_NOSETUP_RSP 80:23.10 Ch0 HL->LL STAT_DHUP 80:23.10 Ch0 callc ChangeState ST_NULL 80:29.10 Ch0 LL->HL SETL2 card 1 3 80:29.10 Ch0 LL->HL SETL3 card 1 0 80:29.10 Ch0 LL->HL HANGUP 80:29.10 Ch0 callc State ST_NULL Event EV_HANGUP no routine Wenn IRQ-Problem: Was kann ich jetzt tun? Vor dem Update ging ja alles tadellos :-( -- http://www.usp-reviews.de - Die USP-Testseite http://www.usp-chat.de - Der Chat zum Forum