Hallo, seit 2 Monaten versuche ich schon CAPI zum laufen zu bringen, aber ohne Erfolg. SUSE 7.1, jetzt 7.2, AMD Athlon 1GHz, FRITZ! PCI Ich habe die Treiber von AVM verwendet, und die von ThePenguin.de. Ich habe auch AVM Support probiert, ... viele Mails, kein Ergebnis Ich habe auch JP probiert, : „„vielleicht hilft 7.2““ leider nicht ! Fehlerbeschreibung: Egal was ich installiere, bei lsmod fehlt immer fcpci. Ich lege mal das (leider lange) Bootlog bei. Mit freundlichen Grüßen Wolfgang Reddies Inspecting /boot/System.map-2.4.4-4GB Loaded 10917 symbols from /boot/System.map-2.4.4-4GB. Symbols match kernel version 2.4.4. Loaded 53 symbols from 1 module. klogd 1.3-3, log source = ksyslog started. <4>Linux version 2.4.4-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed May 16 00:37:55 GMT 2001 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) <4> BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS) <4> BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <4>Scan SMP from c0000000 for 1024 bytes. <4>Scan SMP from c009fc00 for 1024 bytes. <4>Scan SMP from c00f0000 for 65536 bytes. <4>Scan SMP from c009fc00 for 4096 bytes. <4>On node 0 totalpages: 32752 <4>zone(0): 4096 pages. <4>zone(1): 28656 pages. <4>zone(2): 0 pages. <4>mapped APIC to ffffe000 (01221000) <4>Kernel command line: auto BOOT_IMAGE=linux ro root=307 BOOT_FILE=/boot/vmlinuz BOOT_FILE=/boot/vmlinuz <6>Initializing CPU#0 <4>Detected 999.543 MHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 1992.29 BogoMIPS <4>Memory: 125412k/131008k available (1225k kernel code, 5208k reserved, 933k data, 112k init, 0k highmem) <4>Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) <4>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) <4>Page-cache hash table entries: 32768 (order: 5, 131072 bytes) <4>Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) <5>VFS: Diskquotas version dquot_6.5.0 initialized <7>CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <7>CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000 <7>CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 <7>CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 <4>CPU: AMD Athlon(tm) Processor stepping 02 <6>Enabling fast FPU save and restore... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <4>PCI: PCI BIOS revision 2.10 entry at 0xfb250, last bus=1 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <3>Unknown bridge resource 0: assuming transparent <6>PCI: Using IRQ router VIA [1106/0686] at 00:07.0 <6>Applying VIA PCI latency patch. <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) <4>Starting kswapd v1.8 <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <4>pty: 256 Unix98 ptys configured <4>block: queued sectors max/low 83189kB/27729kB, 256 slots per queue <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>VP_IDE: IDE controller on PCI bus 00 dev 39 <4>VP_IDE: chipset revision 6 <4>VP_IDE: not 100%% native mode: will probe irqs later <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 <4> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio <4> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio <4>hda: ST340824A, ATA DISK drive <4>hdc: Pioneer DVD-ROM ATAPIModel DVD-115 0127, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63 <4>hdc: ATAPI 40X DVD-ROM drive, 512kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <6>Partition check: <6> hda: hda1 hda2 < hda5 hda6 hda7 > <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <5>RAMDISK: Compressed image found at block 0 <4>Uncompressing.................................done. <4>Freeing initrd memory: 457k freed <6>loop: loaded (max 8 devices) <6>Serial driver version 5.05a (2001-03-20) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10d <6>SCSI subsystem driver Revision: 1.00 <3>request_module[scsi_hostadapter]: Root fs not mounted <3>request_module[scsi_hostadapter]: Root fs not mounted <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 512 buckets, 4Kbytes <4>TCP: Hash tables configured (established 8192 bind 8192) <6>Linux IP multicast router 0.06 plus PIM-SM <3>IP-Config: No network devices available. <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <4>VFS: Mounted root (ext2 filesystem). <6>usb.c: registered new driver usbdevfs <6>usb.c: registered new driver hub <4>VFS: Mounted root (ext2 filesystem) readonly. <4>change_root: old root has d_count=3 <5>Trying to unmount old root ... okay <4>Freeing unused kernel memory: 112k freed <6>Adding Swap: 136512k swap-space (priority -1) Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started at Tue Aug 7 22:22:35 2001 Activating swap-devices in /etc/fstab... doneChecking file systems... Parallelizing fsck version 1.19a (13-Jul-2000) /dev/hda7: clean, 394000/4480448 files, 2026472/8960245 blocks /dev/hda5: clean, 32/6024 files, 4533/24066 blocks doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda5 on /boot type ext2 (rw) doneActivating remaining swap-devices in /etc/fstab... doneSetting up the CMOS clockdone Setting up timezone datadone Setting up loopback devicedone Setting up hostnamedone Mount SHM FS on /dev/shmdone Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports doneRunning /etc/init.d/boot.local doneCreating /var/log/boot.msg doneEnabling dynamic IP patchdone Enabling syn flood protectiondone Disabling IP forwardingdone Boot logging started at Tue Aug 7 20:22:42 2001 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Loading ISDN drivers ... Loading HiSax driver ... /sbin/insmod /lib/modules/2.4.4-4GB/kernel/drivers/isdn/isdn.o Using /lib/modules/2.4.4-4GB/kernel/drivers/isdn/isdn.o Symbol version prefix '' /sbin/insmod /lib/modules/2.4.4-4GB/kernel/drivers/isdn/hisax/hisax.o type=27,27 protocol=2,2 id=HiSax2%HiSax3 Using /lib/modules/2.4.4-4GB/kernel/drivers/isdn/hisax/hisax.o HiSax3: No such device Loading CAPI4Linux ThePenguin.de Edition ... fcpci - -(0) - - - - /lib/modules/2.4.4-4GB/misc/fcpci.o: init_module: Input/output error Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.4-4GB/misc/fcpci.o: insmod /lib/modules/2.4.4-4GB/misc/fcpci.o failed /lib/modules/2.4.4-4GB/misc/fcpci.o: insmod fcpci failed Loading bridge for isdn4linux ... Starting isdnlog with /etc/isdn/isdnlog.isdnctrl0.options for isdnctrl0... Enabling ide dma mode: hdadone Starting personal-firewall (initial) [not active]unused Initializing random number generatordone Initializing SAM9407 done Verbose-level set to 3. Starting isdn4linux on device ippp0 ippp0 added EAZ/MSN for ippp0 is 0 Layer-2-Protocol for ippp0 is hdlc Layer-3-Protocol for ippp0 is trans Encapsulation for ippp0 is syncppp Security for ippp0 is off Hangup-Timeout for ippp0 is 150 sec. Charge-Hangup for ippp0 is off Incoming-Hangup for ippp0 is off Dialmax must be > 0 Callback for ippp0 is off Callback delay for ippp0 is 2 sec. Reject before Callback for ippp0 is on Setting up network device ippp0 Starting ippp-daemon for ISDN device ippp0 with /etc/ppp/options.ippp0 done ippp0 bound to 0 Starting isdn4linux on device ippp1 ippp1 added EAZ/MSN for ippp1 is 0 Layer-2-Protocol for ippp1 is hdlc Layer-3-Protocol for ippp1 is trans Encapsulation for ippp1 is syncppp Security for ippp1 is off Hangup-Timeout for ippp1 is 150 sec. Charge-Hangup for ippp1 is off Incoming-Hangup for ippp1 is off Dialmax must be > 0 Callback for ippp1 is off Callback delay for ippp1 is 2 sec. Reject before Callback for ippp1 is on Setting up network device ippp1 Starting ippp-daemon for ISDN device ippp1 with /etc/ppp/options.ippp1 done ippp1 bound to 1 Starting isdn4linux on device ippp2 ippp2 added EAZ/MSN for ippp2 is 0 Layer-2-Protocol for ippp2 is hdlc Layer-3-Protocol for ippp2 is trans Encapsulation for ippp2 is syncppp Security for ippp2 is off Hangup-Timeout for ippp2 is 360 sec. Charge-Hangup for ippp2 is off Incoming-Hangup for ippp2 is off Dialmax must be > 0 Callback for ippp2 is off Callback delay for ippp2 is 2 sec. Reject before Callback for ippp2 is on Setting up network device ippp2 Starting ippp-daemon for ISDN device ippp2 with /etc/ppp/options.ippp2 done ippp2 bound to 2 Setting up network device eth0 doneSetting up IPv6 network interface (no address)Setting up IPv6 network interface (no address)Setting up IPv6 network interface (no address)Setting up IPv6 network interface (no address)done Setting up routing (using /etc/route.conf)done Starting SSH daemondone Starting syslog servicesdone Starting service usbmgr done Starting service at daemon:done Starting identddone Loading keymap qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Loading console font lat1-16.psfu doneLoading unimap lat1u.uni doneSetting up console ttys doneStarting SAMBA nmbd :done Starting SAMBA smbd :done Starting service HylaFAXdone Starting lpddone Starting nis_cachemgrskipped error connecting to 192.168.10.2:139 (No route to host) 884: Connection to hannah failed SMB connection failed error connecting to 192.168.10.2:139 (No route to host) 887: Connection to hannah failed SMB connection failed error connecting to 192.168.10.2:139 (No route to host) 890: Connection to hannah failed SMB connection failed error connecting to 192.168.10.2:139 (No route to host) 893: Connection to hannah failed SMB connection failed error connecting to 192.168.10.2:139 (No route to host) 896: Connection to hannah failed SMB connection failed Starting service kdmdone Starting CRON daemondone Starting Name Service Cache Daemondone ALSA driver is already running. Starting httpd [ LDAP Jserv PERL PHP4 Tomcat ] see /var/log/httpd/rcapache.log for details unusedStarting Tomcatrunning Starting personal-firewall (final) [not active]unused Master Resource Control: runlevel 5 has been reached Failed services in runlevel 5: tomcat Skipped services in runlevel 5: personal-firewall.initial pcmcia c4l nis_cachemgr apache personal-firewall.final