
Hallo Liste, ich habe im Suse-10.2 Sysz´temm das Problem, dass die Fritz_Card sich nicht / merkwürdig konfigurieren läßt. Wenn ich die Karte erstmalig einrichte wird in Yast das Gerät contr0 eingerichtet, später werden aber weitere Geräte hinzugefügt, die jeweils als nicht konfiguriert gekennzeichnet werden. Nach Konfiguration werden diese dann als contr1, 2 Geräte aufgeführt. Bei der Bestätigung der Konfiguration kommt der Hinweis, dass Treiber ohne Quellcode ausgewählt wurde... Wie kann ich denn den Status der richtig installierten Hardware überprüfen? Mit capiinfo? Oder gibt es noch grundlegendere Informationsquellen? ki01:/usr/lib/capisuite # capiinfo Number of Controllers : 1 Controller 1: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.11-07 (49.23) Serial Number: 0000000 BChannels: 2 Global Options: 0x00000039 internal controller supported DTMF supported Supplementary Services supported channel allocation supported (leased lines) B1 protocols support: 0x4000011f 64 kbit/s with HDLC framing 64 kbit/s bit-transparent operation V.110 asynconous operation with start/stop byte framing V.110 synconous operation with HDLC framing T.30 modem for fax group 3 Modem asyncronous operation with start/stop byte framing B2 protocols support: 0x00000b1b ISO 7776 (X.75 SLP) Transparent LAPD with Q.921 for D channel X.25 (SAPI 16) T.30 for fax group 3 ISO 7776 (X.75 SLP) with V.42bis compression V.120 asyncronous mode V.120 bit-transparent mode B3 protocols support: 0x800000bf Transparent T.90NL, T.70NL, T.90 ISO 8208 (X.25 DTE-DTE) X.25 DCE T.30 for fax group 3 T.30 for fax group 3 with extensions Modem 0100 0200 39000000 1f010040 1b0b0000 bf000080 00000000 00000000 00000000 00000000 00000000 00000000 01000001 00020000 00000000 00000000 00000000 Supplementary services support: 0x000003ff Hold / Retrieve Terminal Portability ECT 3PTY Call Forwarding Call Deflection MCID CCBS capiinfo - ENDE Danke für Tips Gruß Torsten --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-isdn-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-isdn-de+help@opensuse.org
participants (1)
-
Torsten Kerstan