recvq/fax00007.tif:
    Sender: 0049 375 7883862
     Pages: 1
   Quality: Fine
      Page: 1728 by 1
  Received: 2001:09:10 18:34:47
TimeToRecv: 0:33
SignalRate: 14400 bit/s
DataFormat: 2-D MR

    
    ---- Transcript of session follows ----
Sep 10 18:34:31.65: [  276]: SESSION BEGIN 00000017 493757883862
Sep 10 18:34:31.65: [  276]: <-- [4:ATA\r]
Sep 10 18:34:34.12: [  276]: --> [3:FAX]
Sep 10 18:34:34.13: [  276]: MODEM set baud rate: 19200 baud (flow control unchanged)
Sep 10 18:34:34.13: [  276]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Sep 10 18:34:34.13: [  276]: ANSWER: FAX CONNECTION
Sep 10 18:34:34.13: [  276]: MODEM input buffering enabled
Sep 10 18:34:34.13: [  276]: RECV FAX: begin
Sep 10 18:34:40.57: [  276]: --> [5:+FCON]
Sep 10 18:34:41.61: [  276]: --> [29:+FTSI: "    0049 XXX XXXXXXX"]
Sep 10 18:34:41.62: [  276]: REMOTE TSI "0049 XXX XXXXXXX"
Sep 10 18:34:41.95: [  276]: -->

 [22:+FDCS: 1,5,0,0,1,0,0,1]
Sep 10 18:34:41.96: [  276]: REMOTE wants 14400 bit/s
Sep 10 18:34:41.96: [  276]: REMOTE wants page width 1728 pixels in 215 mm
Sep 10 18:34:41.96: [  276]: REMOTE wants A4 page length (297 mm)
Sep 10 18:34:41.96: [  276]: REMOTE wants 7.7 line/mm
Sep 10 18:34:41.96: [  276]: REMOTE wants 2-D MR
Sep 10 18:34:42.06: [  276]: --> [2:OK]
Sep 10 18:34:42.07: [  276]: <-- [7:AT+FDR\r]
Sep 10 18:34:45.06: [  276]: --> [5:+FCFR]
Sep 10 18:34:47.68: [  276]: --> [22:+FDCS: 1,5,0,0,1,0,0,1]
Sep 10 18:34:47.69: [  276]: REMOTE wants 14400 bit/s
Sep 10 18:34:47.69: [  276]: REMOTE wants page width 1728 pixels in 215 mm
Sep 10 18:34:47.69: [  276]: REMOTE wants A4 page length (297 mm)
Sep 10 18:34:47.69: [  276]: REMOTE wants 7.7 line/mm
Sep 10 18:34:47.69: [  276]: REMOTE wants 2-D MR
Sep 10 18:34:47.69: [  276]: --> [7:CONNECT]
Sep 10 18:34:47.69: [  276]: RECV: begin page
Sep 10 18:34:47.69: [  276]: MODEM set XON/XOFF/FLUSH: input ignored
,
 output generated
Sep 10 18:34:47.69: [  276]: RECV: send trigger 021
Sep 10 18:34:47.69: [  276]: <-- data [1]
Sep 10 18:35:15.92: [  276]: RECV: 9 total lines, 0 bad lines, 0 consecutive bad lines
Sep 10 18:35:15.92: [  276]: MODEM set XON/XOFF/DRAIN: input interpreted, output disabled
Sep 10 18:35:15.92: [  276]: --> [17:+FPTS: 1,2219,0,0]
Sep 10 18:35:25.34: [  276]: --> [7:+FET: 2]
Sep 10 18:35:25.35: [  276]: RECV recv EOP (no more pages or documents)
Sep 10 18:35:25.45: [  276]: --> [2:OK]
Sep 10 18:35:25.46: [  276]: RECV send MCF (message confirmation)
Sep 10 18:35:25.46: [  276]: RECV FAX (00000017): from 0049 XXX XXXXXXX, page 1 in 0:43, A4, 7.7 line/mm, 2-D MR
Sep 10 18:35:25.46: [  276]: RECV FAX (00000017): recvq/fax00007.tif from 0049 XXX XXXXXXX, route to <unspecified>, 1 pages in 0:51
Sep 10 18:35:25.48: [  276]: <-- [7:AT+FDR\r]
Sep 10 18:35:28.50: [  276]: --> [8:+FHNG: 0]
Sep 10 18:35:28.50: [  276]: REMOTE HAN
GU
P: Normal and proper end of connection (code 0)
Sep 10 18:35:28.50: [  276]: RECV FAX: bin/faxrcvd "recvq/fax00007.tif" "ttyS2" "00000017" ""