[New: openFATE 310085] Zypper: Filter
Feature added by: Michael Moser (Mose) Feature #310085, revision 1 Title: Zypper: Filter Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pchk | grep ' Needed' then copy the output of that output to zypper patch Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) I've seen alot of threads on google on this subject, I think it would be a worthwhile implementation. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Rémy Marquis (Spyhawk) Feature #310085, revision 2 - Title: Zypper: Filter + Title: Zypper patch: Filter Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pchk | grep ' Needed' then copy the output of that output to zypper patch Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) I've seen alot of threads on google on this subject, I think it would be a worthwhile implementation. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Michael Moser (Mose) Feature #310085, revision 3 - Title: Zypper patch: Filter + Title: Zypper patch: Filter Security Needed patches Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pchk | grep ' Needed' then copy the output of that output to zypper patch Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) I've seen alot of threads on google on this subject, I think it would be a worthwhile implementation. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Michael Moser (Mose) Feature #310085, revision 4 - Title: Zypper patch: Filter Security Needed patches + Title: Zypper: Filter Security Needed patches Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pchk | grep ' Needed' then copy the output of that output to zypper patch Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) I've seen alot of threads on google on this subject, I think it would be a worthwhile implementation. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Michael Moser (Mose) Feature #310085, revision 5 Title: Zypper: Filter Security Needed patches Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. - Currently we zypper pchk | grep ' Needed' then copy the output of that - output to zypper patch + Currently we zypper pch | grep security | grep '| Needed' then copy & + paste the output of that list to zypper patch. + I've thought about trying to write a script to generate the list, but + thought an intrinsic feature would be cleaner, especially when cssh'd + into 30+ boxes at a time. + I've seen alot of threads on google on this subject, so it seems that + others are trying to accomplish the same task. I think such a feature + would be a worthwhile implementation. Something to the order of: - * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) - I've seen alot of threads on google on this subject, I think it would - be a worthwhile implementation. + -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Carl Linden (carllinden) Feature #310085, revision 7 Title: Zypper: Filter Security Needed patches Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) + Discussion: + #1: Carl Linden (carllinden) (2010-11-01 15:47:12) + Hi + + I have several customer asking for this feature. We used to have "rug + up -t patch -g security" which worked fine on SLES10 but with SLES11 + and zypper this is not yet availble. + + -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Matthias Eckermann (mge1512) Feature #310085, revision 8 Title: Zypper: Filter Security Needed patches Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) - - - - + Or implement it similar to "zypper lp --issue=security", i.e. "zypper + patch --issue=security". Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi - I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. - - + #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) + In my view, the commandline should be similar to "zypper lp -- + issue=security", i.e. "zypper patch --issue=security". -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Matthias Eckermann (mge1512) Feature #310085, revision 9 Title: Zypper: Filter Security Needed patches + openSUSE-11.4: Evaluation + Priority + Requester: Important Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Rob Fortune (rob-fortune) Feature #310085, revision 11 Title: Zypper: Filter Security Needed patches openSUSE-11.4: Evaluation by product manager Priority Requester: Important Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". + #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) + zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep + 'needed$' | cut -f2 -d\|` -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Rob Fortune (rob-fortune) Feature #310085, revision 12 Title: Zypper: Filter Security Needed patches openSUSE-11.4: Evaluation by product manager Priority Requester: Important Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` + #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) + You could grep out recommended if you didn't want them after grepping + for needed. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Federico Lucifredi (flucifredi) Feature #310085, revision 13 Title: Zypper: Filter Security Needed patches openSUSE-11.4: Evaluation by product manager Priority Requester: Important Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) You could grep out recommended if you didn't want them after grepping for needed. + #5: Federico Lucifredi (flucifredi) (2011-03-26 00:43:33) (reply to + #4) + valid use case. Let's do this, unless Engineering reports it as a significant + effort, I think it is clearly worth it. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Jiri Srain (jsrain) Feature #310085, revision 15 Title: Zypper: Filter Security Needed patches openSUSE-11.4: Evaluation by product manager Priority Requester: Important Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) + Engineering Manager: (Novell) + Engineering Manager: (Novell) Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) You could grep out recommended if you didn't want them after grepping for needed. #5: Federico Lucifredi (flucifredi) (2011-03-26 00:43:33) (reply to #4) valid use case. Let's do this, unless Engineering reports it as a significant effort, I think it is clearly worth it. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Lukas Ocilka (locilka) Feature #310085, revision 16 Title: Zypper: Filter Security Needed patches openSUSE-11.4: Evaluation by product manager Priority Requester: Important Package Wishlist: Unconfirmed Priority Requester: Desirable Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) Engineering Manager: (Novell) - Engineering Manager: (Novell) Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) You could grep out recommended if you didn't want them after grepping for needed. #5: Federico Lucifredi (flucifredi) (2011-03-26 00:43:33) (reply to #4) valid use case. Let's do this, unless Engineering reports it as a significant effort, I think it is clearly worth it. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Duncan Mac-Vicar (dmacvicar) Feature #310085, revision 17 Title: Zypper: Filter Security Needed patches openSUSE-11.4: Evaluation by product manager Priority Requester: Important Package Wishlist: Unconfirmed Priority Requester: Desirable + Info Provider: (Novell) Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) Engineering Manager: (Novell) Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) You could grep out recommended if you didn't want them after grepping for needed. #5: Federico Lucifredi (flucifredi) (2011-03-26 00:43:33) (reply to #4) valid use case. Let's do this, unless Engineering reports it as a significant effort, I think it is clearly worth it. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Duncan Mac-Vicar (dmacvicar) Feature #310085, revision 19 Title: Zypper: Filter Security Needed patches openSUSE-11.4: Evaluation by product manager Priority Requester: Important Package Wishlist: Unconfirmed Priority Requester: Desirable Info Provider: (Novell) Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) Engineering Manager: (Novell) + Developer: (Novell) Technical Contact: (Novell) + Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) You could grep out recommended if you didn't want them after grepping for needed. #5: Federico Lucifredi (flucifredi) (2011-03-26 00:43:33) (reply to #4) valid use case. Let's do this, unless Engineering reports it as a significant effort, I think it is clearly worth it. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Duncan Mac-Vicar (dmacvicar) Feature #310085, revision 20 Title: Zypper: Filter Security Needed patches - openSUSE-11.4: Evaluation by product manager - Priority - Requester: Important Package Wishlist: Unconfirmed Priority Requester: Desirable Info Provider: (Novell) Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) Engineering Manager: (Novell) Developer: (Novell) Technical Contact: (Novell) Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) You could grep out recommended if you didn't want them after grepping for needed. #5: Federico Lucifredi (flucifredi) (2011-03-26 00:43:33) (reply to #4) valid use case. Let's do this, unless Engineering reports it as a significant effort, I think it is clearly worth it. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Dominik Heidler (dheidler) Feature #310085, revision 21 Title: Zypper: Filter Security Needed patches Package Wishlist: Unconfirmed Priority Requester: Desirable Info Provider: (Novell) Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) Engineering Manager: (Novell) Developer: (Novell) Technical Contact: (Novell) Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) You could grep out recommended if you didn't want them after grepping for needed. #5: Federico Lucifredi (flucifredi) (2011-03-26 00:43:33) (reply to #4) valid use case. Let's do this, unless Engineering reports it as a significant effort, I think it is clearly worth it. + #7: Dominik Heidler (dheidler) (2011-04-07 14:50:47) (reply to #5) + Feature is implemented. + See git commit a9d08b88d753c72faa375530c5d093117b371bf8 (zypper 1.5.5) -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Duncan Mac-Vicar (dmacvicar) Feature #310085, revision 22 Title: Zypper: Filter Security Needed patches Package Wishlist: Unconfirmed Priority Requester: Desirable Info Provider: (Novell) Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) Engineering Manager: (Novell) Developer: (Novell) Technical Contact: (Novell) Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) You could grep out recommended if you didn't want them after grepping for needed. #5: Federico Lucifredi (flucifredi) (2011-03-26 00:43:33) (reply to #4) valid use case. Let's do this, unless Engineering reports it as a significant effort, I think it is clearly worth it. #7: Dominik Heidler (dheidler) (2011-04-07 14:50:47) (reply to #5) Feature is implemented. See git commit a9d08b88d753c72faa375530c5d093117b371bf8 (zypper 1.5.5) + #8: Duncan Mac-Vicar (dmacvicar) (2011-04-07 16:01:40) (reply to #7) + Implemented in master, we need to backport it. We will do for the first + snapshot. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Duncan Mac-Vicar (dmacvicar) Feature #310085, revision 23 Title: Zypper: Filter Security Needed patches Package Wishlist: Unconfirmed Priority Requester: Desirable Info Provider: (Novell) Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) Engineering Manager: (Novell) Developer: (Novell) Technical Contact: (Novell) Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". + References: + packages: zypper Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) You could grep out recommended if you didn't want them after grepping for needed. #5: Federico Lucifredi (flucifredi) (2011-03-26 00:43:33) (reply to #4) valid use case. Let's do this, unless Engineering reports it as a significant effort, I think it is clearly worth it. #7: Dominik Heidler (dheidler) (2011-04-07 14:50:47) (reply to #5) Feature is implemented. See git commit a9d08b88d753c72faa375530c5d093117b371bf8 (zypper 1.5.5) #8: Duncan Mac-Vicar (dmacvicar) (2011-04-07 16:01:40) (reply to #7) Implemented in master, we need to backport it. We will do for the first snapshot. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Duncan Mac-Vicar (dmacvicar) Feature #310085, revision 24 Title: Zypper: Filter Security Needed patches Package Wishlist: Unconfirmed Priority Requester: Desirable Info Provider: (Novell) Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) Engineering Manager: (Novell) Developer: (Novell) Technical Contact: (Novell) Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". References: packages: zypper + Use Case: + dmacvicar:susemanager_code10:conflict Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) You could grep out recommended if you didn't want them after grepping for needed. #5: Federico Lucifredi (flucifredi) (2011-03-26 00:43:33) (reply to #4) valid use case. Let's do this, unless Engineering reports it as a significant effort, I think it is clearly worth it. #7: Dominik Heidler (dheidler) (2011-04-07 14:50:47) (reply to #5) Feature is implemented. See git commit a9d08b88d753c72faa375530c5d093117b371bf8 (zypper 1.5.5) #8: Duncan Mac-Vicar (dmacvicar) (2011-04-07 16:01:40) (reply to #7) Implemented in master, we need to backport it. We will do for the first snapshot. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Duncan Mac-Vicar (dmacvicar) Feature #310085, revision 25 Title: Zypper: Filter Security Needed patches Package Wishlist: Unconfirmed Priority Requester: Desirable Info Provider: (Novell) Requested by: Michael Moser (mose) Product Manager: (Novell) Project Manager: (Novell) Engineering Manager: (Novell) Developer: (Novell) Technical Contact: (Novell) Technical Contact: (Novell) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". References: packages: zypper Use Case: dmacvicar:susemanager_code10:conflict Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) You could grep out recommended if you didn't want them after grepping for needed. #5: Federico Lucifredi (flucifredi) (2011-03-26 00:43:33) (reply to #4) valid use case. Let's do this, unless Engineering reports it as a significant effort, I think it is clearly worth it. #7: Dominik Heidler (dheidler) (2011-04-07 14:50:47) (reply to #5) Feature is implemented. See git commit a9d08b88d753c72faa375530c5d093117b371bf8 (zypper 1.5.5) #8: Duncan Mac-Vicar (dmacvicar) (2011-04-07 16:01:40) (reply to #7) Implemented in master, we need to backport it. We will do for the first snapshot. + #9: Duncan Mac-Vicar (dmacvicar) (2011-05-06 12:29:28) + Can be set to done when request id 69749 is accepted. -- openSUSE Feature: https://features.opensuse.org/310085
Feature changed by: Andreas Jaeger (a_jaeger) Feature #310085, revision 27 Title: Zypper: Filter Security Needed patches - Package Wishlist: Unconfirmed + Package Wishlist: Done Priority Requester: Desirable Requested by: Michael Moser (mose) Partner organization: openSUSE.org Description: I would be nice if there was a way to install only security patches that are 'Needed'. I have a multitude of SuSE based servers under management where I work, and we need to keep boxes up to date with security releases. Since we dont manage the applications the customer uses, we have no way of knowing if recommended patches for any given package will have adverse affects on their software. Currently we zypper pch | grep security | grep '| Needed' then copy & paste the output of that list to zypper patch. I've thought about trying to write a script to generate the list, but thought an intrinsic feature would be cleaner, especially when cssh'd into 30+ boxes at a time. I've seen alot of threads on google on this subject, so it seems that others are trying to accomplish the same task. I think such a feature would be a worthwhile implementation. Something to the order of: * zypper patch -s (security only) * zypper patch -r (recommended only) * zypper patch (Defaults to all patches) Or implement it similar to "zypper lp --issue=security", i.e. "zypper patch --issue=security". References: packages: zypper Use Case: dmacvicar:susemanager_code10:conflict Discussion: #1: Carl Linden (carllinden) (2010-11-01 15:47:12) Hi I have several customer asking for this feature. We used to have "rug up -t patch -g security" which worked fine on SLES10 but with SLES11 and zypper this is not yet availble. #2: Matthias Eckermann (mge1512) (2010-11-01 17:17:39) In my view, the commandline should be similar to "zypper lp -- issue=security", i.e. "zypper patch --issue=security". #3: Rob Fortune (rob-fortune) (2011-03-11 20:53:17) zypper -n in --auto-agree-with-licenses `zypper -A list-patches | grep 'needed$' | cut -f2 -d\|` #4: Rob Fortune (rob-fortune) (2011-03-11 20:54:31) (reply to #3) You could grep out recommended if you didn't want them after grepping for needed. #5: Federico Lucifredi (flucifredi) (2011-03-26 00:43:33) (reply to #4) valid use case. Let's do this, unless Engineering reports it as a significant effort, I think it is clearly worth it. #7: Dominik Heidler (dheidler) (2011-04-07 14:50:47) (reply to #5) Feature is implemented. See git commit a9d08b88d753c72faa375530c5d093117b371bf8 (zypper 1.5.5) #8: Duncan Mac-Vicar (dmacvicar) (2011-04-07 16:01:40) (reply to #7) Implemented in master, we need to backport it. We will do for the first snapshot. #9: Duncan Mac-Vicar (dmacvicar) (2011-05-06 12:29:28) Can be set to done when request id 69749 is accepted. -- openSUSE Feature: https://features.opensuse.org/310085
participants (1)
-
fate_noreply＠suse.de