Re: [opensuse-factory] GRUB error - can anyone help please? - openSUSE Factory

newer
[opensuse-factory] Test-Kernel

Re: [opensuse-factory] GRUB error - can anyone help please?

older
[opensuse-factory] Zope oddities

Felix Miata

28 Nov 2006 28 Nov '06

13:02

On 2006/11/28 07:30 (GMT+-0500) Felix Miata apparently typed:

...

I did a FTP install from the beta2 mirror state IIRC. Shortly after I did some partition rearranging, moving the factory from hda21 to hda10. After editing the appropriate files and running grub-install, it would not boot when hda10 selected from IBM Boot Manager or when hda10 chainloaded from grub on another partition. Loading the kernel and initrd from grub elsewhere worked fine.

...

After updating to the rc1 mirror state I reran grub-install once again, and now it boots from BM, and presumably also from chainload.

...

The rc1 graphical grub boot menu is way cool!

I just stumbled onto a clue why my problem may have occurred, but don't know what to make of or do about it. I just grabbed the newest default kernel rpm via ftp and ran rpm -ivh on it. After mkinitrd's bootsplash output came these two lines: ERROR: Core::SplidDevPath: Cannot get device for (hd0,20)/boot/grub/stage1 ERROR: Core::SplidDevPath: Cannot get device for (hd0,20)/boot/grub/stage2 The error is understandable, as when initially installed factory was on hda21. Now hda21 no longer exists. I moved factory to hda10 over a week ago. What triggered the errors? What is remembering the original installation target? Reboot with the new 2.6.18.2-31-default kernel seemed totally normal. -- "Rejoice and be glad, because great is your reward in heaven." Matthew 5:12 NIV Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://mrmazda.no-ip.com/ --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

Show replies by date

Andreas Jaeger

28 Nov 28 Nov

15:56

New subject: [opensuse-factory] GRUB error - can anyone help please?

Felix Miata writes:

...

On 2006/11/28 07:30 (GMT+-0500) Felix Miata apparently typed:

...
I did a FTP install from the beta2 mirror state IIRC. Shortly after I did some partition rearranging, moving the factory from hda21 to hda10. After editing the appropriate files and running grub-install, it would not boot when hda10 selected from IBM Boot Manager or when hda10 chainloaded from grub on another partition. Loading the kernel and initrd from grub elsewhere worked fine.

...
After updating to the rc1 mirror state I reran grub-install once again, and now it boots from BM, and presumably also from chainload.

...
The rc1 graphical grub boot menu is way cool!

I just stumbled onto a clue why my problem may have occurred, but don't know what to make of or do about it.

I just grabbed the newest default kernel rpm via ftp and ran rpm -ivh on it. After mkinitrd's bootsplash output came these two lines:

ERROR: Core::SplidDevPath: Cannot get device for (hd0,20)/boot/grub/stage1 ERROR: Core::SplidDevPath: Cannot get device for (hd0,20)/boot/grub/stage2

The error is understandable, as when initially installed factory was on hda21. Now hda21 no longer exists. I moved factory to hda10 over a week ago.

What triggered the errors? What is remembering the original installation target?

Reboot with the new 2.6.18.2-31-default kernel seemed totally normal.

Please file a bugreport for this! Andreas -- Andreas Jaeger, aj@suse.de, http://www.suse.de/~aj/ SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126

Felix Miata

16:22

New subject: [opensuse-factory] GRUB error - can anyone help please?

On 2006/11/28 16:56 (GMT+0100) Andreas Jaeger apparently typed:

...

Felix Miata writes:

...

...
On 2006/11/28 07:30 (GMT+-0500) Felix Miata apparently typed:

...

...
...
I did a FTP install from the beta2 mirror state IIRC. Shortly after I did some partition rearranging, moving the factory from hda21 to hda10. After editing the appropriate files and running grub-install, it would not boot when hda10 selected from IBM Boot Manager or when hda10 chainloaded from grub on another partition. Loading the kernel and initrd from grub elsewhere worked fine.

...

...
...
After updating to the rc1 mirror state I reran grub-install once again, and now it boots from BM, and presumably also from chainload.

...

...
...
The rc1 graphical grub boot menu is way cool!

...

...
I just stumbled onto a clue why my problem may have occurred, but don't know what to make of or do about it.

...

...
I just grabbed the newest default kernel rpm via ftp and ran rpm -ivh on it. After mkinitrd's bootsplash output came these two lines:

...

...
ERROR: Core::SplidDevPath: Cannot get device for (hd0,20)/boot/grub/stage1 ERROR: Core::SplidDevPath: Cannot get device for (hd0,20)/boot/grub/stage2

...

...
The error is understandable, as when initially installed factory was on hda21. Now hda21 no longer exists. I moved factory to hda10 over a week ago.

...

...
What triggered the errors? What is remembering the original installation target?

...

...
Reboot with the new 2.6.18.2-31-default kernel seemed totally normal.

...

Please file a bugreport for this!

What product and component? IOW, whose fault is it likely to be? /etc/grub.conf was left untouched from its original installation creation state (the old partition originally installed to) after I used YaST 2 System Update to upgrade to RC1. -- "Rejoice and be glad, because great is your reward in heaven." Matthew 5:12 NIV Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://mrmazda.no-ip.com/ --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

Andreas Jaeger

16:29

New subject: [opensuse-factory] GRUB error - can anyone help please?

Felix Miata writes:

...

On 2006/11/28 16:56 (GMT+0100) Andreas Jaeger apparently typed:

...
Felix Miata writes:

...
...
On 2006/11/28 07:30 (GMT+-0500) Felix Miata apparently typed:

...
...
...
I did a FTP install from the beta2 mirror state IIRC. Shortly after I did some partition rearranging, moving the factory from hda21 to hda10. After editing the appropriate files and running grub-install, it would not boot when hda10 selected from IBM Boot Manager or when hda10 chainloaded from grub on another partition. Loading the kernel and initrd from grub elsewhere worked fine.

...
...
...
After updating to the rc1 mirror state I reran grub-install once again, and now it boots from BM, and presumably also from chainload.

...
...
...
The rc1 graphical grub boot menu is way cool!

...
...
I just stumbled onto a clue why my problem may have occurred, but don't know what to make of or do about it.

...
...
I just grabbed the newest default kernel rpm via ftp and ran rpm -ivh on it. After mkinitrd's bootsplash output came these two lines:

...
...
ERROR: Core::SplidDevPath: Cannot get device for (hd0,20)/boot/grub/stage1 ERROR: Core::SplidDevPath: Cannot get device for (hd0,20)/boot/grub/stage2

...
...
The error is understandable, as when initially installed factory was on hda21. Now hda21 no longer exists. I moved factory to hda10 over a week ago.

...
...
What triggered the errors? What is remembering the original installation target?

...
...
Reboot with the new 2.6.18.2-31-default kernel seemed totally normal.

...
Please file a bugreport for this!

What product and component? IOW, whose fault is it likely to be?

So, is this a 10.2 install? In that case against 10.2, component kernel,

...

/etc/grub.conf was left untouched from its original installation creation state (the old partition originally installed to) after I used YaST 2 System Update to upgrade to RC1.

Andreas -- Andreas Jaeger, aj@suse.de, http://www.suse.de/~aj/ SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126

Felix Miata

29 Nov 29 Nov

04:59

New subject: [opensuse-factory] GRUB error - can anyone help please?

On 2006/11/28 17:29 (GMT+0100) Andreas Jaeger apparently typed:

...

Felix Miata writes:

...

...
On 2006/11/28 16:56 (GMT+0100) Andreas Jaeger apparently typed:

...

...
...
Felix Miata writes:

...

...
...
...
On 2006/11/28 07:30 (GMT+-0500) Felix Miata apparently typed:

...

...
...
...
...
I did a FTP install from the beta2 mirror state IIRC. Shortly after I did some partition rearranging, moving the factory from hda21 to hda10. After editing the appropriate files and running grub-install, it would not boot when hda10 selected from IBM Boot Manager or when hda10 chainloaded from grub on another partition. Loading the kernel and initrd from grub elsewhere worked fine.

...

...
...
...
...
After updating to the rc1 mirror state I reran grub-install once again, and now it boots from BM, and presumably also from chainload.

...

...
...
...
...
The rc1 graphical grub boot menu is way cool!

...

...
...
...
I just stumbled onto a clue why my problem may have occurred, but don't know what to make of or do about it.

...

...
...
...
I just grabbed the newest default kernel rpm via ftp and ran rpm -ivh on it. After mkinitrd's bootsplash output came these two lines:

...

...
...
...
ERROR: Core::SplidDevPath: Cannot get device for (hd0,20)/boot/grub/stage1 ERROR: Core::SplidDevPath: Cannot get device for (hd0,20)/boot/grub/stage2

...

...
...
...
The error is understandable, as when initially installed factory was on hda21. Now hda21 no longer exists. I moved factory to hda10 over a week ago.

...

...
...
...
What triggered the errors? What is remembering the original installation target?

...

...
...
...
Reboot with the new 2.6.18.2-31-default kernel seemed totally normal.

...

...
...
Please file a bugreport for this!

...

...
What product and component? IOW, whose fault is it likely to be?

...

So, is this a 10.2 install? In that case against 10.2, component kernel,

Yes, RC1. But, I feel like I've described more than one problem (1-failure to boot after moving partition and reinstalling grub, 2-/etc/grub.conf not getting rewritten as required on YaST2 system upgrade after partition relocation, 3-error messages after mkinitrd portion of new kernel installation), and don't know which you'd like filed.

...

...
/etc/grub.conf was left untouched from its original installation creation state (the old partition originally installed to) after I used YaST 2 System Update to upgrade to RC1. -- "Rejoice and be glad, because great is your reward in heaven." Matthew 5:12 NIV

Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://mrmazda.no-ip.com/ --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org

Andreas Jaeger

05:52

New subject: [opensuse-factory] GRUB error - can anyone help please?

Felix Miata writes:

...

Yes, RC1. But, I feel like I've described more than one problem

Ah, now I see...

...

(1-failure to boot after moving partition and reinstalling grub, 2-/etc/grub.conf not getting rewritten as required on YaST2 system upgrade after partition relocation, 3-error messages after mkinitrd portion of new kernel installation), and don't know which you'd like filed.

I asked for #3, Andreas -- Andreas Jaeger, aj@suse.de, http://www.suse.de/~aj/ SUSE Linux Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126

6355

Age (days ago)

6356

Last active (days ago)

List overview

Download

5 comments

2 participants

participants (2)

Andreas Jaeger
Felix Miata