On 11/11/2014 09:19 PM, Roman Bysh wrote:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1

On 11/11/2014 03:57 AM, ellanios82 wrote:

...

Hello List ,

- how please to adjust in yast , the Bootloader Grub2 to see Large Text for processes whilst booting :

1). Must i use the character-size Top-Box , or the character-size Lower Box ?

2). How to select size-Large ? [ i previously tried selecting "Text" and subsequently was unable to Boot! { something like error 'unrecognized character-code'} ]

3). then presumably i must :

Delete "quiet splash=silent" from kernel command line

..........

thanks Use the one below. This the setting for console resolution. Setting it to a lower resolution will increase the character size.

- --

- What please does the Top-Box character-resolution refer [ think mentions VGA] but, i do not understand ? : If i recall, once i selected Top-Box "Text" but this caused a gosh-awful inability to boot ; seemingly a total grub2 seize-up ? ......... thank you kindly regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

On 11/12/2014 05:19 AM, Roman Bysh wrote:
> On 11/11/2014 03:02 PM, ellanios82 wrote:
>> On 11/11/2014 09:19 PM, Roman Bysh wrote:
>>> -----BEGIN PGP SIGNED MESSAGE-----
>>> Hash: SHA1
>>>
>>> On 11/11/2014 03:57 AM, ellanios82 wrote:
>>>> Hello List ,
>>>>
>>>> - how please to adjust in yast , the Bootloader Grub2  to see
>>>> Large Text for processes whilst booting  :
>>>>
>>>> 1).  Must i use the character-size Top-Box , or the character-size
>>>> Lower Box ?
>>>>
>>>> 2). How to select size-Large ? [ i previously tried selecting
>>>> "Text" and subsequently was unable to Boot! { something like error
>>>> 'unrecognized character-code'} ]
>>>>
>>>> 3). then presumably i must :
>>>>
>>>> Delete "quiet splash=silent" from kernel command line
>>>>
>>>> ..........
>>>>
>>>> thanks
>>> Use the one below. This the setting for console resolution.
>>> Setting it to a lower resolution will increase the character size.
>>>
>>> - --
>>   - What please does the Top-Box character-resolution refer [ think
>> mentions VGA]
>>   but, i do not understand ? : If i recall, once i selected Top-Box
>> "Text" but this caused a gosh-awful inability to boot ; seemingly a
>> total grub2 seize-up ?
>>
>> .........
>>
>>   thank you kindly
>>    regards
> The top section handles the frame buffer. This adjusts the screen resolution for
> Grub2. I always have mine sets to a lower resolution.
> It depends on your graphics card. I'm using an older GeForce 8600 GTS Nvidia card.
>
> My setting is:
>
> My screen resolution is 1680x1050 on a 20" monitor.
> My setting Grub2 fb setting is:  1280x1024 24-bits or 0x31b or vga= 795
>
> The numbers beginning with 0x300 and up have been deprecated. So
> now the alternate vga numbers are being used. i.e 795
>
> If you find that the Grub2 is freezing up try using a lower number.
> I never use the same resolution as your regular screen viewing.
> This setting is just for the boot up process.
>
> So top is for screen resolution. Bottom is for console text. Yes.
>
> I hope this helps you.
...............

  - helps greatly : many thanks
      regards

-- 
To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org
To contact the owner, e-mail: opensuse-factory+owner@opensuse.org