[opensuse-factory] Tumbleweed QEMU 3.1x and 4.1 problems
LS, I tried to use Qemu 4.1. under Tumbleweed, but the client does not get an IP address. Compiled it myself, same result. Tried to compile Qemu 3.1 series, but all failed during compile with the message: (loadable library and perl binaries are mismatched (got handshake key 0xde00080, needed 0xce00080) Compiling and using the 3.1.x and 4.1 version under Opensuse 15.1 is no problem. Except when using 4.1 and wanting to use spice where there is only a very old version available under 15.1. So, the problem must be in the Tumbleweed distribution, which somehow blocks Qemu 4.1 networking or disallows compiling Qemu 3.1 series. Suggestions? Regards, Frans -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 19-10-2019 23:00, Frans de Boer wrote:
LS,
I tried to use Qemu 4.1. under Tumbleweed, but the client does not get an IP address. Compiled it myself, same result.
Tried to compile Qemu 3.1 series, but all failed during compile with the message: (loadable library and perl binaries are mismatched (got handshake key 0xde00080, needed 0xce00080)
Compiling and using the 3.1.x and 4.1 version under Opensuse 15.1 is no problem. Except when using 4.1 and wanting to use spice where there is only a very old version available under 15.1.
So, the problem must be in the Tumbleweed distribution, which somehow blocks Qemu 4.1 networking or disallows compiling Qemu 3.1 series.
Suggestions?
Regards, Frans
Update: Excerpt from listing for 3.1x: GEN qemu-img-cmds.texi GEN qemu-monitor-info.texi GEN qemu-doc.html MiscXS.c: loadable library and perl binaries are mismatched (got handshake key 0xde00080, needed 0xce00080) make: *** [Makefile:942: qemu-doc.html] Error 1 --- Frans. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
Am Samstag, 19. Oktober 2019, 23:00:06 CEST schrieb Frans de Boer:
LS,
I tried to use Qemu 4.1. under Tumbleweed, but the client does not get an IP address. Compiled it myself, same result.
Tried to compile Qemu 3.1 series, but all failed during compile with the message: (loadable library and perl binaries are mismatched (got handshake key 0xde00080, needed 0xce00080)
Compiling and using the 3.1.x and 4.1 version under Opensuse 15.1 is no problem. Except when using 4.1 and wanting to use spice where there is only a very old version available under 15.1.
So, the problem must be in the Tumbleweed distribution, which somehow blocks Qemu 4.1 networking or disallows compiling Qemu 3.1 series.
Suggestions?
No solution to your problem, but libvirt of TW 20191014 is doing just fine here, including networking: libvirt-daemon-driver-qemu-5.7.0-1.1.x86_64 qemu-4.1.0-1.1.x86_64 qemu-block-curl-4.1.0-1.1.x86_64 qemu-block-rbd-4.1.0-1.1.x86_64 qemu-ipxe-1.0.0+-1.1.noarch qemu-ksm-4.1.0-1.1.x86_64 qemu-kvm-4.1.0-1.1.x86_64 qemu-linux-user-4.1.0-1.1.x86_64 qemu-ovmf-x86_64-201908-1.1.noarch qemu-seabios-1.12.1-1.1.noarch qemu-sgabios-8-1.1.noarch qemu-tools-4.1.0-1.1.x86_64 qemu-ui-curses-4.1.0-1.1.x86_64 qemu-ui-gtk-4.1.0-1.1.x86_64 qemu-ui-sdl-4.1.0-1.1.x86_64 qemu-vgabios-1.12.1-1.1.noarch qemu-x86-4.1.0-1.1.x86_64 Here's the part of nic config from a typical qemu run: -netdev tap,fd=38,id=hostnet0 -device e1000,netdev=hostnet0,id=net0,mac=52:54:00:xx:xx:xx,bus=pci.0,addr=0x3 and the network config: <network connections="1"> <name>default</name> <uuid>ef7f738c-86fe-43df-a1b6-xxxxxxxxxxxx</uuid> <forward mode="nat"> <nat> <port start="1024" end="65535"/> </nat> </forward> <bridge name="virbr0" stp="on" delay="0"/> <mac address="52:54:00:xx:xx:xx"/> <ip address="192.168.122.1" netmask="255.255.255.0"> <dhcp> <range start="192.168.122.2" end="192.168.122.254"/> </dhcp> </ip> </network> Using it with 15.0 JeOS and Tails here, and really happy to be able to configure everything via GUI. ;-) Since you compile yourself, you're in for many issues, that stem from manual installations, but it's most definitely a configuration issue (that might be related to libvirt's evolution). You might consider trying virt-manager after a full clean-up. Cheers, Pete -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
On 20-10-2019 13:42, Hans-Peter Jansen wrote:
Am Samstag, 19. Oktober 2019, 23:00:06 CEST schrieb Frans de Boer:
LS,
I tried to use Qemu 4.1. under Tumbleweed, but the client does not get an IP address. Compiled it myself, same result.
Tried to compile Qemu 3.1 series, but all failed during compile with the message: (loadable library and perl binaries are mismatched (got handshake key 0xde00080, needed 0xce00080)
Compiling and using the 3.1.x and 4.1 version under Opensuse 15.1 is no problem. Except when using 4.1 and wanting to use spice where there is only a very old version available under 15.1.
So, the problem must be in the Tumbleweed distribution, which somehow blocks Qemu 4.1 networking or disallows compiling Qemu 3.1 series.
Suggestions? No solution to your problem, but libvirt of TW 20191014 is doing just fine here, including networking:
libvirt-daemon-driver-qemu-5.7.0-1.1.x86_64 qemu-4.1.0-1.1.x86_64 qemu-block-curl-4.1.0-1.1.x86_64 qemu-block-rbd-4.1.0-1.1.x86_64 qemu-ipxe-1.0.0+-1.1.noarch qemu-ksm-4.1.0-1.1.x86_64 qemu-kvm-4.1.0-1.1.x86_64 qemu-linux-user-4.1.0-1.1.x86_64 qemu-ovmf-x86_64-201908-1.1.noarch qemu-seabios-1.12.1-1.1.noarch qemu-sgabios-8-1.1.noarch qemu-tools-4.1.0-1.1.x86_64 qemu-ui-curses-4.1.0-1.1.x86_64 qemu-ui-gtk-4.1.0-1.1.x86_64 qemu-ui-sdl-4.1.0-1.1.x86_64 qemu-vgabios-1.12.1-1.1.noarch qemu-x86-4.1.0-1.1.x86_64
Here's the part of nic config from a typical qemu run:
-netdev tap,fd=38,id=hostnet0 -device e1000,netdev=hostnet0,id=net0,mac=52:54:00:xx:xx:xx,bus=pci.0,addr=0x3
and the network config:
<network connections="1"> <name>default</name> <uuid>ef7f738c-86fe-43df-a1b6-xxxxxxxxxxxx</uuid> <forward mode="nat"> <nat> <port start="1024" end="65535"/> </nat> </forward> <bridge name="virbr0" stp="on" delay="0"/> <mac address="52:54:00:xx:xx:xx"/> <ip address="192.168.122.1" netmask="255.255.255.0"> <dhcp> <range start="192.168.122.2" end="192.168.122.254"/> </dhcp> </ip> </network>
Using it with 15.0 JeOS and Tails here, and really happy to be able to configure everything via GUI. ;-)
Since you compile yourself, you're in for many issues, that stem from manual installations, but it's most definitely a configuration issue (that might be related to libvirt's evolution).
You might consider trying virt-manager after a full clean-up.
Cheers, Pete
I like to keep things simple ;) , so I am using manual (scripted) invocations. No use for virt-manager and the likes. The issue under TW and using Qemu 4.1 might be related to using the virtio network driver, you did not use. Maybe I try to use the e1000 model and see what happens. BTW, even if I use the shipped version of Qemu under TW, same problem. In fact, I had that installed before I noticed the network issue. Remember, everything is working correctly under 15.1 - except the spice-viewer issue. --- Frans. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org
participants (2)
-
Frans de Boer -
Hans-Peter Jansen