On Mon, Aug 31, 2015 at 12:12 PM, Sid Boyce wrote:

Problem: nothing provides perl(:MODULE_COMPAT_5.20.1) needed by

Seeing something similar, I though it was a transient error, but apparently it's not $sudo zypper dup Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command. Loading repository data... Reading installed packages... Computing distribution upgrade... 2 Problems: Problem: spamassassin-3.4.0-47.2.x86_64 requires perl(:MODULE_COMPAT_5.20.1), but this requirement cannot be provided Problem: perl-5.20.1-3.12.x86_64 requires perl-base = 5.20.1, but this requirement cannot be provided Robert -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

On Mon, 2015-08-31 at 11:41 +0200, Francesco Montesano wrote:

Hi,

2015-08-31 11:12 GMT+02:00 Sid Boyce :

...

Konsole output #zypper in perl-Tk Loading repository data... Reading installed packages... Resolving package dependencies...

Problem: nothing provides perl(:MODULE_COMPAT_5.20.1) needed by perl-Tk-804.032-3.4.x86_64 Solution 1: do not install perl-Tk-804.032-3.4.x86_64 Solution 2: break perl-Tk-804.032-3.4.x86_64 by ignoring some of its dependencies

If I try to install frozen bubble, I get a similar problem, but with perl(Locale::Maketext::Lexicon). So now I have to work ... :P

Either that (you work) or you get to fix frozen-bubble, which will benefit all of us :) the current issue with frozen-bubble can be pinned down to: Problem: nothing provides perl = 5.20.1 needed by frozen-bubble-2.212 -10.2.x86_64 Solution 1: do not install frozen-bubble-2.212-10.2.x86_64 Solution 2: break frozen-bubble-2.212-10.2.x86_64 by ignoring some of its dependencies looking in OBS ( https://build.opensuse.org/package/show/openSUSE:Factory/frozen-bubble ) we see that the package currently fails to build. The build log says: [ 152s] + perl Build.PL destdir=/home/abuild/rpmbuild/BUILDROOT/frozen -bubble-2.212-10.3.x86_64 installdirs=vendor --prefix=/usr [ 153s] Can't locate Module/Build.pm in @INC (you may need to install the Module::Build module) (@INC contains: inc /usr/lib/perl5/site_perl/5.22.0/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.22.0 /usr/lib/perl5/vendor_perl/5.22.0/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.22.0 /usr/lib/perl5/5.22.0/x86_64-linux -thread-multi /usr/lib/perl5/5.22.0 /usr/lib/perl5/site_perl .) at inc/My/Builder.pm line 12. [ 153s] BEGIN failed--compilation aborted at inc/My/Builder.pm line 12. [ 153s] Compilation failed in require at Build.PL line 10. [ 153s] BEGIN failed--compilation aborted at Build.PL line 10. [ 153s] error: Bad exit status from /var/tmp/rpm-tmp.qLCqli (%build) so, we miss to have Module/Build.pm in our buildroot.

From our perl packaging knowledge, we know that thus should be a virtual provides, that can be added to the .spec:

BuildRequires: perl(Module::Build) add a .changes entry to that, and see if it builds already again with this :) Now, sadly, to make things less fun for you, Bernhard already made all this work, and FB has a pending submission to openSUSE:Factory ( https://build.opensuse.org/request/show/327857 ); so the next snapshot will have a fixed version of it again. So, then back to playing Frozen Bubble! (you can get it from the games repo in the meantime) Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Hi Dominique, 2015-08-31 15:32 GMT+02:00 Dominique Leuenberger / DimStar :

[...]

Either that (you work) or you get to fix frozen-bubble, which will benefit all of us :)

the current issue with frozen-bubble can be pinned down to: Problem: nothing provides perl = 5.20.1 needed by frozen-bubble-2.212 -10.2.x86_64 Solution 1: do not install frozen-bubble-2.212-10.2.x86_64 Solution 2: break frozen-bubble-2.212-10.2.x86_64 by ignoring some of its dependencies

looking in OBS ( https://build.opensuse.org/package/show/openSUSE:Factory/frozen-bubble ) we see that the package currently fails to build.

The build log says: [ 152s] + perl Build.PL destdir=/home/abuild/rpmbuild/BUILDROOT/frozen -bubble-2.212-10.3.x86_64 installdirs=vendor --prefix=/usr [ 153s] Can't locate Module/Build.pm in @INC (you may need to install the Module::Build module) (@INC contains: inc /usr/lib/perl5/site_perl/5.22.0/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.22.0 /usr/lib/perl5/vendor_perl/5.22.0/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.22.0 /usr/lib/perl5/5.22.0/x86_64-linux -thread-multi /usr/lib/perl5/5.22.0 /usr/lib/perl5/site_perl .) at inc/My/Builder.pm line 12. [ 153s] BEGIN failed--compilation aborted at inc/My/Builder.pm line 12. [ 153s] Compilation failed in require at Build.PL line 10. [ 153s] BEGIN failed--compilation aborted at Build.PL line 10. [ 153s] error: Bad exit status from /var/tmp/rpm-tmp.qLCqli (%build)

so, we miss to have Module/Build.pm in our buildroot.

From our perl packaging knowledge, we know that thus should be a virtual provides, that can be added to the .spec:

BuildRequires: perl(Module::Build)

add a .changes entry to that, and see if it builds already again with this :)

Thanks for the detailed explanation. I reported the frozen bubble thinking that it's related with the issues with perl and yast I reported first in this thread. **But** while writing this mail, I decided to check better and the offending package is coming from packman that still hasn't updated its dependencies to the new perl. So first: sorry for the initial noise. Second: I've set packman priority to 100 Third: I'll remove offending the perl modules from packman and hope that I don't need them.

Now, sadly, to make things less fun for you, Bernhard already made all this work, and FB has a pending submission to openSUSE:Factory ( https://build.opensuse.org/request/show/327857 ); so the next snapshot will have a fixed version of it again.

Too bad :D

So, then back to playing Frozen Bubble! (you can get it from the games repo in the meantime)

I can survive for a few more days. Fra

Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

-- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Hi there, "munin" is another contender which needs adoption to the most recent Perl update: https://bugzilla.opensuse.org/show_bug.cgi?id=943976 Cheers. l8er manfred

On Tue, 01 Sep 2015, 14:10:14 +0200, Manfred Hollstein wrote:

[...] More to follow...

Last one for today: logwatch's http script uses an unescaped {, too. Bugzilla ID and patch: https://bugzilla.opensuse.org/show_bug.cgi?id=944013 FWIW, I currently don't see any similar diagnostics anymore. Cheers. l8er manfred

On Tue, 01 Sep 2015, 14:24:04 +0200, Dominique Leuenberger / DimStar wrote:

On Tue, 2015-09-01 at 14:10 +0200, Manfred Hollstein wrote:

...

Moin,

On Tue, 01 Sep 2015, 10:48:09 +0200, Manfred Hollstein wrote:

...

Hi there,

"munin" is another contender which needs adoption to the most recent Perl update:

https://bugzilla.opensuse.org/show_bug.cgi?id=943976

Once I fixed the munin package in my home project, running munin now generates the following messages:

I already have a submit pending for munin: SR#328307; not sure if you needed more / less to fix this.

Great, thx. This was the only change needed. I'll have a look a Ludwig's snapshot announcements and switch back to the official package(s), when they work again ;) Cheers. l8er manfred

On 09/01/2015 02:24 PM, Dominique Leuenberger / DimStar wrote:

I already have a submit pending for munin: SR#328307; not sure if you needed more / less to fix this.

FWIW there's one more here (oS:TW 20150829): Unescaped left brace in regex is deprecated, passed through in regex; \ marked by <-- HERE in m/\${ <-- HERE ([^ \t=:+{}]+)}/ at \ /usr/bin/automake line 3936. Unortunately, I don't have time for this the next few days. Anyone else? Thanks & have a nice day, Berny -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

On 09/02/2015 09:47 AM, Dominique Leuenberger / DimStar wrote:

Fixed that one yesterday already: https://build.opensuse.org/request/show/328394

great, cool! Thanks & have nice day, Berny -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org