[opensuse-factory] New Tumbleweed snapshot 20200322 released!

newer
[opensuse-factory] getent hosts...

older
Re: [opensuse-factory] Curl error....

Dominique Leuenberger

23 Mar 2020 23 Mar '20

23:00

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&version=Tumbleweed&build=20200322 Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: blueberry (1.3.5 -> 1.3.6) inxi (3.0.32 -> 3.0.38) wireguard (0.0.20200215_k5.5.9_1 -> 0.0.20200318_k5.5.9_1) yast2 (4.2.73 -> 4.2.74) yast2-firstboot (4.2.12 -> 4.2.13) yast2-installation (4.2.37 -> 4.2.40) yast2-ntp-client (4.2.9 -> 4.2.10) yast2-packager (4.2.58 -> 4.2.59) yast2-storage-ng (4.2.97 -> 4.2.100) yast2-theme (4.2.8 -> 4.2.9) === Details === ==== blueberry ==== Version update (1.3.5 -> 1.3.6) Subpackages: blueberry-lang - Update to version 1.3.6 * tray: Switch to symbolic icons (#100) * Lower min requirement to GTK 3.22 * Update tranlsations ==== inxi ==== Version update (3.0.32 -> 3.0.38) - Update to version 3.0.38: * See /usr/share/doc/packages/inxi/inxi.changelog - Drop support for old openSUSE versions. ==== wireguard ==== Version update (0.0.20200215_k5.5.9_1 -> 0.0.20200318_k5.5.9_1) - Update to version 0.0.20200318 * compat: RHEL 7 backported skb_ensure_writable() * compat: RHEL 8.2 backported ipv6_dst_lookup_flow * curve25519-x86_64: avoid use of r12 * wireguard: queueing: account for skb->protocol==0 * receive: remove dead code from default packet type case * noise: error out precomputed DH during handshake rather than config * send: use normaler alignment formula from upstream ==== yast2 ==== Version update (4.2.73 -> 4.2.74) Subpackages: yast2-logs - Fixed CWM::MultiStatusSelector help text icons displayed during installation (related to bsc#1157780, bsc#1161308, bsc#1161200) - 4.2.74 ==== yast2-firstboot ==== Version update (4.2.12 -> 4.2.13) - Enable by default registration on SLE (bsc#1162846) - 4.2.13 ==== yast2-installation ==== Version update (4.2.37 -> 4.2.40) - In the proposal runner, restore the scroll only when it was previously saved (bsc#1167248). - 4.2.40 - Verify the package versions before applying the self-update fixes (related to bsc#1163084) - 4.2.39 - Drop few not needed recommends to have identical package on opensuse and SLE (jsc#SLE-11936, jsc#SLE-11851) - 4.2.38 ==== yast2-ntp-client ==== Version update (4.2.9 -> 4.2.10) - NTP-server-configuration/Time-setting-module in a running system: Do not show check-boxes for saving configuration and starting the deamon (follow up of bsc#1164547). - 4.2.10 ==== yast2-packager ==== Version update (4.2.58 -> 4.2.59) - Improve the product selection dialog (related to bsc#1157780). - 4.2.59 ==== yast2-storage-ng ==== Version update (4.2.97 -> 4.2.100) - AutoYaST: show an error when no suitable components are found for Bcache, Btrfs multi-devices filesystems, and RAID devices (bsc#1167053). - 4.2.100 - Partitioner: do not allow to clone a partition table to another device with a different block size (bsc#1166363) - 4.2.99 - Restricted the scenarios in which software-defined RAIDs are eligible as target devices for the proposal. Do it only in systems with EFI (bsc#1166258). - 4.2.98 ==== yast2-theme ==== Version update (4.2.8 -> 4.2.9) Subpackages: yast2-theme-breeze yast2-theme-oxygen - Uses a transparent background for the YAST_BANNER (jsc#SLE-9424, bsc#1162997) - 4.2.9 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Show replies by date

Knurpht-openSUSE

23 Mar 23 Mar

23:25

New subject: [opensuse-factory] Curl error. Was: New Tumbleweed snapshot 20200322 released!

...

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here.

Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&version =Tumbleweed&build=20200322

Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports

Packages changed: blueberry (1.3.5 -> 1.3.6) inxi (3.0.32 -> 3.0.38) wireguard (0.0.20200215_k5.5.9_1 -> 0.0.20200318_k5.5.9_1) yast2 (4.2.73 -> 4.2.74) yast2-firstboot (4.2.12 -> 4.2.13) yast2-installation (4.2.37 -> 4.2.40) yast2-ntp-client (4.2.9 -> 4.2.10) yast2-packager (4.2.58 -> 4.2.59) yast2-storage-ng (4.2.97 -> 4.2.100) yast2-theme (4.2.8 -> 4.2.9)

=== Details ===

==== blueberry ==== Version update (1.3.5 -> 1.3.6) Subpackages: blueberry-lang

- Update to version 1.3.6 * tray: Switch to symbolic icons (#100) * Lower min requirement to GTK 3.22 * Update tranlsations

==== inxi ==== Version update (3.0.32 -> 3.0.38)

- Update to version 3.0.38: * See /usr/share/doc/packages/inxi/inxi.changelog - Drop support for old openSUSE versions.

==== wireguard ==== Version update (0.0.20200215_k5.5.9_1 -> 0.0.20200318_k5.5.9_1)

- Update to version 0.0.20200318 * compat: RHEL 7 backported skb_ensure_writable() * compat: RHEL 8.2 backported ipv6_dst_lookup_flow * curve25519-x86_64: avoid use of r12 * wireguard: queueing: account for skb->protocol==0 * receive: remove dead code from default packet type case * noise: error out precomputed DH during handshake rather than config * send: use normaler alignment formula from upstream

==== yast2 ==== Version update (4.2.73 -> 4.2.74) Subpackages: yast2-logs

- Fixed CWM::MultiStatusSelector help text icons displayed during installation (related to bsc#1157780, bsc#1161308, bsc#1161200) - 4.2.74

==== yast2-firstboot ==== Version update (4.2.12 -> 4.2.13)

- Enable by default registration on SLE (bsc#1162846) - 4.2.13

==== yast2-installation ==== Version update (4.2.37 -> 4.2.40)

- In the proposal runner, restore the scroll only when it was previously saved (bsc#1167248). - 4.2.40 - Verify the package versions before applying the self-update fixes (related to bsc#1163084) - 4.2.39 - Drop few not needed recommends to have identical package on opensuse and SLE (jsc#SLE-11936, jsc#SLE-11851) - 4.2.38

==== yast2-ntp-client ==== Version update (4.2.9 -> 4.2.10)

- NTP-server-configuration/Time-setting-module in a running system: Do not show check-boxes for saving configuration and starting the deamon (follow up of bsc#1164547). - 4.2.10

==== yast2-packager ==== Version update (4.2.58 -> 4.2.59)

- Improve the product selection dialog (related to bsc#1157780). - 4.2.59

==== yast2-storage-ng ==== Version update (4.2.97 -> 4.2.100)

- AutoYaST: show an error when no suitable components are found for Bcache, Btrfs multi-devices filesystems, and RAID devices (bsc#1167053). - 4.2.100 - Partitioner: do not allow to clone a partition table to another device with a different block size (bsc#1166363) - 4.2.99 - Restricted the scenarios in which software-defined RAIDs are eligible as target devices for the proposal. Do it only in systems with EFI (bsc#1166258). - 4.2.98

==== yast2-theme ==== Version update (4.2.8 -> 4.2.9) Subpackages: yast2-theme-breeze yast2-theme-oxygen

- Uses a transparent background for the YAST_BANNER (jsc#SLE-9424, bsc#1162997) - 4.2.9 Seeing this happen: 18 packages to upgrade, 1 to remove. Overall download size: 49.6 MiB. Already cached: 1.2 MiB. After the operation, 154.5 KiB will be freed. Continue? [y/n/v/...? shows all options] (y): In cache gawk-5.0.1-3.7.x86_64.rpm (1/18), 1.2 MiB ( 3.4 MiB unpacked) Retrieving package inxi-3.0.38-1.1.noarch (2/18), 276.2 KiB ( 1.0 MiB unpacked) Retrieving: inxi-3.0.38-1.1.noarch.rpm .......................................................................[error (46.1 KiB/s)] Download (curl) error for 'https://download.opensuse.org/tumbleweed/repo/oss/ noarch/inxi-3.0.38-1.1.noarch.rpm': Error code: Unsupported protocol Error message: Redirect to protocol "http" not supported or disabled in

Op dinsdag 24 maart 2020 00:00:42 CET schreef Dominique Leuenberger: libcurl Abort, retry, ignore? [a/r/i/...? shows all options] (a): -- Gertjan Lettink a.k.a. Knurpht openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Knurpht-openSUSE

24 Mar 24 Mar

00:37

New subject: [opensuse-factory] Curl error. Was: New Tumbleweed snapshot 20200322 released!

Op dinsdag 24 maart 2020 00:25:10 CET schreef Knurpht-openSUSE:

...

Op dinsdag 24 maart 2020 00:00:42 CET schreef Dominique Leuenberger:

...
Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here.

Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versi on =Tumbleweed&build=20200322

Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports

Packages changed: blueberry (1.3.5 -> 1.3.6) inxi (3.0.32 -> 3.0.38) wireguard (0.0.20200215_k5.5.9_1 -> 0.0.20200318_k5.5.9_1) yast2 (4.2.73 -> 4.2.74) yast2-firstboot (4.2.12 -> 4.2.13) yast2-installation (4.2.37 -> 4.2.40) yast2-ntp-client (4.2.9 -> 4.2.10) yast2-packager (4.2.58 -> 4.2.59) yast2-storage-ng (4.2.97 -> 4.2.100) yast2-theme (4.2.8 -> 4.2.9)

=== Details ===

==== blueberry ==== Version update (1.3.5 -> 1.3.6) Subpackages: blueberry-lang

- Update to version 1.3.6

* tray: Switch to symbolic icons (#100) * Lower min requirement to GTK 3.22 * Update tranlsations

==== inxi ==== Version update (3.0.32 -> 3.0.38)

- Update to version 3.0.38: * See /usr/share/doc/packages/inxi/inxi.changelog

- Drop support for old openSUSE versions.

==== wireguard ==== Version update (0.0.20200215_k5.5.9_1 -> 0.0.20200318_k5.5.9_1)

- Update to version 0.0.20200318

* compat: RHEL 7 backported skb_ensure_writable() * compat: RHEL 8.2 backported ipv6_dst_lookup_flow * curve25519-x86_64: avoid use of r12 * wireguard: queueing: account for skb->protocol==0 * receive: remove dead code from default packet type case * noise: error out precomputed DH during handshake rather than

config

* send: use normaler alignment formula from upstream

==== yast2 ==== Version update (4.2.73 -> 4.2.74) Subpackages: yast2-logs

- Fixed CWM::MultiStatusSelector help text icons displayed during

installation (related to bsc#1157780, bsc#1161308, bsc#1161200)

- 4.2.74

==== yast2-firstboot ==== Version update (4.2.12 -> 4.2.13)

- Enable by default registration on SLE (bsc#1162846) - 4.2.13

==== yast2-installation ==== Version update (4.2.37 -> 4.2.40)

- In the proposal runner, restore the scroll only when it was

previously saved (bsc#1167248).

- 4.2.40 - Verify the package versions before applying the self-update

fixes (related to bsc#1163084)

- 4.2.39 - Drop few not needed recommends to have identical package on

opensuse and SLE (jsc#SLE-11936, jsc#SLE-11851)

- 4.2.38

==== yast2-ntp-client ==== Version update (4.2.9 -> 4.2.10)

- NTP-server-configuration/Time-setting-module in a running

system: Do not show check-boxes for saving configuration and starting the deamon (follow up of bsc#1164547).

- 4.2.10

==== yast2-packager ==== Version update (4.2.58 -> 4.2.59)

- Improve the product selection dialog (related to bsc#1157780). - 4.2.59

==== yast2-storage-ng ==== Version update (4.2.97 -> 4.2.100)

- AutoYaST: show an error when no suitable components are found

for Bcache, Btrfs multi-devices filesystems, and RAID devices (bsc#1167053).

- 4.2.100 - Partitioner: do not allow to clone a partition table to another

device with a different block size (bsc#1166363)

- 4.2.99 - Restricted the scenarios in which software-defined RAIDs are

eligible as target devices for the proposal. Do it only in systems with EFI (bsc#1166258).

- 4.2.98

==== yast2-theme ==== Version update (4.2.8 -> 4.2.9) Subpackages: yast2-theme-breeze yast2-theme-oxygen

- Uses a transparent background for the YAST_BANNER

(jsc#SLE-9424, bsc#1162997)

- 4.2.9

Seeing this happen: 18 packages to upgrade, 1 to remove. Overall download size: 49.6 MiB. Already cached: 1.2 MiB. After the operation, 154.5 KiB will be freed. Continue? [y/n/v/...? shows all options] (y): In cache gawk-5.0.1-3.7.x86_64.rpm (1/18), 1.2 MiB ( 3.4 MiB unpacked) Retrieving package inxi-3.0.38-1.1.noarch (2/18), 276.2 KiB ( 1.0 MiB unpacked) Retrieving: inxi-3.0.38-1.1.noarch.rpm .......................................................................[erro r (46.1 KiB/s)] Download (curl) error for 'https://download.opensuse.org/tumbleweed/repo/oss/ noarch/inxi-3.0.38-1.1.noarch.rpm': Error code: Unsupported protocol Error message: Redirect to protocol "http" not supported or disabled in libcurl

Abort, retry, ignore? [a/r/i/...? shows all options] (a): Seems to be fixed meanwhile.

-- Gertjan Lettink a.k.a. Knurpht openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Knurpht-openSUSE

00:40

New subject: [opensuse-factory] Curl error. Was: New Tumbleweed snapshot 20200322 released!

Op dinsdag 24 maart 2020 01:37:54 CET schreef Knurpht-openSUSE:

...

Op dinsdag 24 maart 2020 00:25:10 CET schreef Knurpht-openSUSE:

...
Op dinsdag 24 maart 2020 00:00:42 CET schreef Dominique Leuenberger:

...
Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here.

Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&ver si on =Tumbleweed&build=20200322

Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports

Packages changed: blueberry (1.3.5 -> 1.3.6) inxi (3.0.32 -> 3.0.38) wireguard (0.0.20200215_k5.5.9_1 -> 0.0.20200318_k5.5.9_1) yast2 (4.2.73 -> 4.2.74) yast2-firstboot (4.2.12 -> 4.2.13) yast2-installation (4.2.37 -> 4.2.40) yast2-ntp-client (4.2.9 -> 4.2.10) yast2-packager (4.2.58 -> 4.2.59) yast2-storage-ng (4.2.97 -> 4.2.100) yast2-theme (4.2.8 -> 4.2.9)

=== Details ===

==== blueberry ==== Version update (1.3.5 -> 1.3.6) Subpackages: blueberry-lang

- Update to version 1.3.6

* tray: Switch to symbolic icons (#100) * Lower min requirement to GTK 3.22 * Update tranlsations

==== inxi ==== Version update (3.0.32 -> 3.0.38)

- Update to version 3.0.38: * See /usr/share/doc/packages/inxi/inxi.changelog

- Drop support for old openSUSE versions.

==== wireguard ==== Version update (0.0.20200215_k5.5.9_1 -> 0.0.20200318_k5.5.9_1)

- Update to version 0.0.20200318

* compat: RHEL 7 backported skb_ensure_writable() * compat: RHEL 8.2 backported ipv6_dst_lookup_flow * curve25519-x86_64: avoid use of r12 * wireguard: queueing: account for skb->protocol==0 * receive: remove dead code from default packet type case * noise: error out precomputed DH during handshake rather than

config

* send: use normaler alignment formula from upstream

==== yast2 ==== Version update (4.2.73 -> 4.2.74) Subpackages: yast2-logs

- Fixed CWM::MultiStatusSelector help text icons displayed during

installation (related to bsc#1157780, bsc#1161308, bsc#1161200)

- 4.2.74

==== yast2-firstboot ==== Version update (4.2.12 -> 4.2.13)

- Enable by default registration on SLE (bsc#1162846) - 4.2.13

==== yast2-installation ==== Version update (4.2.37 -> 4.2.40)

- In the proposal runner, restore the scroll only when it was

previously saved (bsc#1167248).

- 4.2.40 - Verify the package versions before applying the self-update

fixes (related to bsc#1163084)

- 4.2.39 - Drop few not needed recommends to have identical package on

opensuse and SLE (jsc#SLE-11936, jsc#SLE-11851)

- 4.2.38

==== yast2-ntp-client ==== Version update (4.2.9 -> 4.2.10)

- NTP-server-configuration/Time-setting-module in a running

system: Do not show check-boxes for saving configuration and starting the deamon (follow up of bsc#1164547).

- 4.2.10

==== yast2-packager ==== Version update (4.2.58 -> 4.2.59)

- Improve the product selection dialog (related to bsc#1157780). - 4.2.59

==== yast2-storage-ng ==== Version update (4.2.97 -> 4.2.100)

- AutoYaST: show an error when no suitable components are found

for Bcache, Btrfs multi-devices filesystems, and RAID devices (bsc#1167053).

- 4.2.100 - Partitioner: do not allow to clone a partition table to another

device with a different block size (bsc#1166363)

- 4.2.99 - Restricted the scenarios in which software-defined RAIDs are

eligible as target devices for the proposal. Do it only in systems with EFI (bsc#1166258).

- 4.2.98

==== yast2-theme ==== Version update (4.2.8 -> 4.2.9) Subpackages: yast2-theme-breeze yast2-theme-oxygen

- Uses a transparent background for the YAST_BANNER

(jsc#SLE-9424, bsc#1162997)

- 4.2.9

Seeing this happen: 18 packages to upgrade, 1 to remove. Overall download size: 49.6 MiB. Already cached: 1.2 MiB. After the operation, 154.5 KiB will be freed. Continue? [y/n/v/...? shows all options] (y): In cache gawk-5.0.1-3.7.x86_64.rpm (1/18), 1.2 MiB ( 3.4 MiB unpacked) Retrieving package inxi-3.0.38-1.1.noarch (2/18), 276.2 KiB ( 1.0 MiB unpacked) Retrieving: inxi-3.0.38-1.1.noarch.rpm .......................................................................[er ro r (46.1 KiB/s)] Download (curl) error for 'https://download.opensuse.org/tumbleweed/repo/oss/ noarch/inxi-3.0.38-1.1.noarch.rpm': Error code: Unsupported protocol Error message: Redirect to protocol "http" not supported or disabled in libcurl

...
Abort, retry, ignore? [a/r/i/...? shows all options] (a): Seems to be fixed meanwhile. Was too early, some packages download OK now, some don't.

-- Gertjan Lettink a.k.a. Knurpht openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Stefan Brüns

00:53

New subject: [opensuse-factory] Curl error. Was: New Tumbleweed snapshot 20200322 released!

On Dienstag, 24. März 2020 01:40:37 CET Knurpht-openSUSE wrote:

...

Op dinsdag 24 maart 2020 01:37:54 CET schreef Knurpht-openSUSE:

...
Op dinsdag 24 maart 2020 00:25:10 CET schreef Knurpht-openSUSE:

...
Op dinsdag 24 maart 2020 00:00:42 CET schreef Dominique Leuenberger:

...

...
...
...
Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports

^^^ [130 lines removed ...] Can you please full-quote the mail another time, I need 5 for a flush ... Regards, Stefan -- Stefan Brüns / Bergstraße 21 / 52062 Aachen home: +49 241 53809034 mobile: +49 151 50412019

Knurpht-openSUSE

00:56

New subject: [opensuse-factory] Curl error. Was: New Tumbleweed snapshot 20200322 released!

Op dinsdag 24 maart 2020 01:53:36 CET schreef Stefan Brüns:

...

On Dienstag, 24. März 2020 01:40:37 CET Knurpht-openSUSE wrote:

...
Op dinsdag 24 maart 2020 01:37:54 CET schreef Knurpht-openSUSE:

...
Op dinsdag 24 maart 2020 00:25:10 CET schreef Knurpht-openSUSE:

...
Op dinsdag 24 maart 2020 00:00:42 CET schreef Dominique Leuenberger:

...
Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports

^^^

[130 lines removed ...]

Can you please full-quote the mail another time, I need 5 for a flush ...

Regards,

Stefan I get the message, Stefan. Sorry.

-- Gertjan Lettink a.k.a. Knurpht openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Olaf Hering

06:32

New subject: [opensuse-factory] Curl error. Was: New Tumbleweed snapshot 20200322 released!

Am Tue, 24 Mar 2020 01:37:54 +0100 schrieb Knurpht-openSUSE :

...

Seems to be fixed meanwhile.

It is not fixed. Still these stupid full quotes. WHAT ARE YOU SMOKING EVERY DAY?!

Stephan Kulow

07:34

New subject: [opensuse-factory] Curl error. Was: New Tumbleweed snapshot 20200322 released!

Am 24.03.20 um 07:32 schrieb Olaf Hering:

...

Am Tue, 24 Mar 2020 01:37:54 +0100 schrieb Knurpht-openSUSE :

...
Seems to be fixed meanwhile.

It is not fixed.

Still these stupid full quotes. WHAT ARE YOU SMOKING EVERY DAY?!

Could you guys please calm your language? People are people and people make mistakes. Beside that: if you ever met Knurpht, it's pretty obvious what he's smoking - these awfully stinking cigarettes. Greetings, Stephan -- Lighten up, just enjoy life, smile more, laugh more, and don't get so worked up about things. Kenneth Branagh -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

Mathias Homann

07:51

New subject: [opensuse-factory] Curl error. Was: New Tumbleweed snapshot 20200322 released!

Am Dienstag, 24. März 2020, 08:34:06 CET schrieb Stephan Kulow:

...

Beside that: if you ever met Knurpht, it's pretty obvious what he's smoking - these awfully stinking cigarettes.

let's crowdsource a decent pipe and a tin of dannemann sweet mango - smells like freshly baked belgian waffles. Cheers [MH] *Mathias Homann* Mathias.Homann@openSUSE.org[1] OBS: lemmy04 Jabber (XMPP): lemmy@tuxonline.tech IRC: [Lemmy] on freenode and ircnet (bouncer active) telegram: https://telegram.me/lemmy98[2] keybase: https://keybase.io/lemmy[3] *gpg key fingerprint: 8029 2240 F4DD 7776 E7D2 C042 6B8E 029E 13F2 C102* -------- [1] mailto:Mathias.Homann@openSUSE.org [2] https://telegram.me/lemmy98 [3] https://keybase.io/lemmy

Per Jessen

07:54

New subject: [opensuse-factory] Curl error. Was: New Tumbleweed snapshot 20200322 released!

Knurpht-openSUSE wrote:

...

Seeing this happen: 18 packages to upgrade, 1 to remove. Overall download size: 49.6 MiB. Already cached: 1.2 MiB. After the operation, 154.5 KiB will be freed. Continue? [y/n/v/...? shows all options] (y): In cache gawk-5.0.1-3.7.x86_64.rpm (1/18), 1.2 MiB ( 3.4 MiB unpacked) Retrieving package inxi-3.0.38-1.1.noarch (2/18), 276.2 KiB ( 1.0 MiB unpacked) Retrieving: inxi-3.0.38-1.1.noarch.rpm ...................................................................... [error (46.1 KiB/s)] Download (curl) error for 'https://download.opensuse.org/tumbleweed/repo/oss/ noarch/inxi-3.0.38-1.1.noarch.rpm': Error code: Unsupported protocol Error message: Redirect to protocol "http" not supported or disabled in libcurl

I wonder if that might be due to your https download being redirected to an http mirror ? -- Per Jessen, Zürich (-1.0°C) Member, openSUSE Heroes -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org

1487

Age (days ago)

1488

Last active (days ago)

List overview

Download

9 comments

7 participants

participants (7)

Dominique Leuenberger
Knurpht-openSUSE
Mathias Homann
Olaf Hering
Per Jessen
Stefan Brüns
Stephan Kulow

[opensuse-factory] New Tumbleweed snapshot 20200322 released!

tags

participants (7)