[opensuse-factory] b43-fwcutter
Hello, would it be possible to also include b43-fwcutter (not only bcm43xx-fwcutter) into factory? b43-fwcutter is needed for newer firmwares / chips. Working packages (I used them myself) can be found for the moment in home:dimstar. Thanks! Dominique -- Sorry for the annoying disclamer TMF is a global management and accounting outsourcing firm with 77 offices in 60 countries and over 2,500 professionals (2007). TMF is expanding rapidly throughout the world. Learn more about our unique network and our services and visit our website at www.tmf-group.com. The information contained in this e-mail communication is confidential and solely intended for the person to whom it is addressed. If someone other than the intended recipient should receive or come into possession of this e-mail communication, he/she will not be entitled to read, disseminate, disclose or duplicate it. If you are not the intended recipient, you are requested to notify the sender and to destroy the original e-mail communication. TMF is neither liable for the correct and complete transmission of the information contained in this e-mail communication nor for any delay in its receipt. This footnote also confirms that this email message has been checked for the presence of computer viruses. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
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---------------------------------------------------------------------To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.orgFor additional commands, e-mail: opensuse-factory+help@opensuse.org
On Tuesday 08 January 2008 15:33, Dominique Leuenberger wrote:
Hello,
would it be possible to also include b43-fwcutter (not only bcm43xx-fwcutter) into factory? b43-fwcutter is needed for newer firmwares / chips.
I'll add b43-fwcutter to factory soon. Best regards, Christopher -- Christopher Stender, R&D Team Mobile Devices SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
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---------------------------------------------------------------------To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.orgFor additional commands, e-mail: opensuse-factory+help@opensuse.org
Christopher Stender wrote:
On Tuesday 08 January 2008 15:33, Dominique Leuenberger wrote:
Hello,
would it be possible to also include b43-fwcutter (not only bcm43xx-fwcutter) into factory? b43-fwcutter is needed for newer firmwares / chips.
I'll add b43-fwcutter to factory soon.
Best regards,
Christopher
bcm43xx-fwcutter also if you can as some firmware files need it. Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Sid
On 10-01-2008 at 02:54, Sid Boyce
wrote: bcm43xx-fwcutter also if you can as some firmware files need it. Regards
bcm43xx-fwcutter IS already part of Factory; it was there at least since openSUSE 10.2 (I was to lazy to check older versions). Dominique -- Greetings, and sorry for the annoying disclaimer TMF is a global management and accounting outsourcing firm with 77 offices in 60 countries and over 2,500 professionals (2007). TMF is expanding rapidly throughout the world. Learn more about our unique network and our services and visit our website at www.tmf-group.com. The information contained in this e-mail communication is confidential and solely intended for the person to whom it is addressed. If someone other than the intended recipient should receive or come into possession of this e-mail communication, he/she will not be entitled to read, disseminate, disclose or duplicate it. If you are not the intended recipient, you are requested to notify the sender and to destroy the original e-mail communication. TMF is neither liable for the correct and complete transmission of the information contained in this e-mail communication nor for any delay in its receipt. This footnote also confirms that this email message has been checked for the presence of computer viruses. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
Christophe,
On 09-01-2008 at 16:05, Christopher Stender
wrote: On Tuesday 08 January 2008 15:33, Dominique Leuenberger wrote: Hello, would it be possible to also include b43-fwcutter (not only bcm43xx-fwcutter) into factory? b43-fwcutter is needed for newer firmwares / chips.
I'll add b43-fwcutter to factory soon.
May I dare to ask how soon will be soon? As of Alpha1 / current Factory, b43-fwcutter is not included yet. As mentioned: in OBS home:dimstar you can find working rpms of b43-fwcutter version 009 Dominique -- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
On Thursday 24 January 2008 10:49, Dominique Leuenberger wrote:
Christophe,
On 09-01-2008 at 16:05, Christopher Stender
wrote: On Tuesday 08 January 2008 15:33, Dominique Leuenberger wrote:
Hello,
would it be possible to also include b43-fwcutter (not only bcm43xx-fwcutter) into factory? b43-fwcutter is needed for newer firmwares / chips.
I'll add b43-fwcutter to factory soon.
May I dare to ask how soon will be soon? As of Alpha1 / current Factory, b43-fwcutter is not included yet. As mentioned: in OBS home:dimstar you can find working rpms of b43-fwcutter version 009
Package is already included in factory and should be part of openSUSE 11.0 Alpha2. http://download.opensuse.org/distribution/SL-OSS-factory/inst-source/suse/i5... Best regards Christopher -- Christopher Stender, R&D Team Mobile Devices SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org
participants (4)
-
Christopher Stender
-
Dominique Leuenberger
-
Rafał Miłecki
-
Sid Boyce