I already upgraded my system to the mentioned snapshot containing KDE Apps 16.12.0. I had some trouble opening Mails in Kontact/Kmail. After 2 seconds a window appears stating something with "retrieving..." and akonadiserver crashing sometimes on system shutdown and closing Kontact. Thus, I was not able to open a mail.
Went back to the versions from Factory_Standard and here all is fine again.
Did anybody already test it too?
Robby.
On dimanche, 18 décembre 2016 15.21:44 h CET Robby Engelmann wrote:
I already upgraded my system to the mentioned snapshot containing KDE Apps 16.12.0. I had some trouble opening Mails in Kontact/Kmail. After 2 seconds a window appears stating something with "retrieving..." and akonadiserver crashing sometimes on system shutdown and closing Kontact. Thus, I was not able to open a mail.
Went back to the versions from Factory_Standard and here all is fine again.
Did anybody already test it too?
Robby.
I wonder how you got 20161217, actually at 6:20pm CEST only 20161216 is available on download.o.o ?
from the very same location where openqa gets it from :-)
2016-12-18 15:21 GMT+01:00 Robby Engelmann robby.engelmann@igfs-ev.de:
I already upgraded my system to the mentioned snapshot containing KDE Apps 16.12.0. I had some trouble opening Mails in Kontact/Kmail. After 2 seconds a window appears stating something with "retrieving..." and akonadiserver crashing sometimes on system shutdown and closing Kontact. Thus, I was not able to open a mail.
Went back to the versions from Factory_Standard and here all is fine again.
Did anybody already test it too?
KMail is broken in TW 20161217 also for me.
I'm using KMail standalone without Kontact. The mail notifier in the systray shows new mails arrived. I can see also new number of new mails in the folder treeview. At the beginning, I could not see a divided message list or message viewer to the right, just a big content pane showing Retrieving Folder Contents Please wait . . . which was flickering whenever clicking to a different folder in the tree. After about 1-2 minutes, the divided message list and message viewer for the folders appeared, but whenever clicking on a message in the message list, the message viewer still just shows the Retrieving... message.
The akonadi service is still running after all these actions:
rkrell@rkrell:~> akonadictl status Akonadi Control: running Akonadi Server: running Akonadi Server Search Support: available (Remote Search)
No output of kmail started in a terminal at all.
I started kmail in valgrind which prints out a long list of errors immediately at startup, all of them seem to refer to QtWebEngine and OpenGL, maybe an expert knowing the source code should have a look at it. I'm using the nouveau graphics driver, but don't have currently the Mesa-dri-nouveau package installed, according to the latest recommendations in this list and from zypper.
Any hints how to repair this or whatever else to provide which can be helpful for a further analyze?
René
Opened a bug report to track it... https://bugzilla.novell.com/show_bug.cgi?id=1016225
2016-12-18 22:18 GMT+01:00 René Krell:
KMail is broken in TW 20161217 also for me.
... I started kmail in valgrind which prints out a long list of errors immediately at startup, all of them seem to refer to QtWebEngine and OpenGL, maybe an expert knowing the source code should have a look at it. I'm using the nouveau graphics driver, but don't have currently the Mesa-dri-nouveau package installed, according to the latest recommendations in this list and from zypper.
Any hints how to repair this or whatever else to provide which can be helpful for a further analyze?
Got to update my own answer: I did install the Mesa-dri-nouveau (on an Optimus hardware) and restart the system. After that, KMail works and shows all mails immediately.
here it is intel and this should work with webengine as far as I know. And using apps from factory_standard and factory frameworks repos it works fine. I thought TW and both repos should be at almost same versions now.
On Sunday, December 18, 2016 10:36:02 PM WIB Robby Engelmann wrote:
here it is intel and this should work with webengine as far as I know. And using apps from factory_standard and factory frameworks repos it works fine. I thought TW and both repos should be at almost same versions now.
--
On Sonntag, 18. Dezember 2016 22:30:13 CET René Krell wrote:
2016-12-18 22:18 GMT+01:00 René Krell:
KMail is broken in TW 20161217 also for me.
... I started kmail in valgrind which prints out a long list of errors immediately at startup, all of them seem to refer to QtWebEngine and OpenGL, maybe an expert knowing the source code should have a look at it. I'm using the nouveau graphics driver, but don't have currently the Mesa-dri-nouveau package installed, according to the latest recommendations in this list and from zypper.
Any hints how to repair this or whatever else to provide which can be helpful for a further analyze?
Got to update my own answer: I did install the Mesa-dri-nouveau (on an Optimus hardware) and restart the system. After that, KMail works and shows all mails immediately.
This info helped me to overcome my problems after 20161217 update. My repositories only are the normal Tumbleweed updates, Packman and KDE Extra. In my case kmail did not show messages even after 10 minutes of waiting. Akonadictl refresh did nothing to resolve the problem. After using http://download.opensuse.org/repositories/KDE:/Applications/openSUSE_Factory... and http://download.opensuse.org/repositories/KDE:/Frameworks5/openSUSE_Factory/ I can read the emails again.
2016-12-18 22:30 GMT+01:00 René Krell:
2016-12-18 22:18 GMT+01:00 René Krell:
KMail is broken in TW 20161217 also for me.
Got to update my own answer: I did install the Mesa-dri-nouveau (on an Optimus hardware) and restart the system. After that, KMail works and shows all mails immediately.
After several minutes of running kmail and sometimes navigating in mails the problem occurs again, the message viewer shows just the Retrieving... message and doesn't recover from this state. Even restarting kmail doesn't help at this point, but akonadictl restart helps.
This seems to be in sync again with Robby's bug report https://bugzilla.novell.com/show_bug.cgi?id=1016225.
Il giorno Sun, 18 Dec 2016 23:18:55 +0100 René Krell renda.krell@gmail.com ha scritto:
This seems to be in sync again with Robby's bug report https://bugzilla.novell.com/show_bug.cgi?id=1016225.
As said in the BR: kdepim-runtime failed to build in Factory: this did not happen in the stagings. Probably some components (libkgapi, likely) need a rebuild against the new PIM stack.
As a workaround (but it is unsupported: if it breaks, you get to keep the pieces) you can get kdepim-runtime from KDE:Applications.
On Sonntag, 18. Dezember 2016 22:18:37 CET René Krell wrote:
KMail is broken in TW 20161217 also for me.
As Luca already indicated, some libraries didn't got rebuild after KDE Applications 16.12 was accepted in Factory. This issue got now resolved and the updates are in the progress to be published as a special update, which are available through the Tumbleweed Update channel.
Performing the update should deliver you an updated version of the libKF5GAPI* libraries, libkolab* libraries and kdepim-runtime. This should fix the issues with kmail after the last TW snapshot update
Raymond
Op maandag 19 december 2016 12:56:07 CET schreef Raymond Wooninck:
On Sonntag, 18. Dezember 2016 22:18:37 CET René Krell wrote:
KMail is broken in TW 20161217 also for me.
As Luca already indicated, some libraries didn't got rebuild after KDE Applications 16.12 was accepted in Factory. This issue got now resolved and the updates are in the progress to be published as a special update, which are available through the Tumbleweed Update channel.
Performing the update should deliver you an updated version of the libKF5GAPI* libraries, libkolab* libraries and kdepim-runtime. This should fix the issues with kmail after the last TW snapshot update
Raymond
Thanks Raymond. Installed the fixed packages and all is back to normal.
On Mon, Dec 19, 2016 at 3:56 AM, Raymond Wooninck tittiatcoke@gmail.com wrote:
On Sonntag, 18. Dezember 2016 22:18:37 CET René Krell wrote:
KMail is broken in TW 20161217 also for me.
As Luca already indicated, some libraries didn't got rebuild after KDE Applications 16.12 was accepted in Factory. This issue got now resolved and the updates are in the progress to be published as a special update, which are available through the Tumbleweed Update channel.
Performing the update should deliver you an updated version of the libKF5GAPI* libraries, libkolab* libraries and kdepim-runtime. This should fix the issues with kmail after the last TW snapshot update
Raymond
Thank you.
Must have been a sign from the Beyond. Get off email for a short while and enjoy life =B^)
Seriously ... thank you all for your quick action.
Carl
2016-12-18 15:21 GMT+01:00 Robby Engelmann robby.engelmann@igfs-ev.de:
I already upgraded my system to the mentioned snapshot containing KDE Apps 16.12.0. I had some trouble opening Mails in Kontact/Kmail. After 2 seconds a window appears stating something with "retrieving..." and akonadiserver crashing sometimes on system shutdown and closing Kontact. Thus, I was not able to open a mail.
Went back to the versions from Factory_Standard and here all is fine again.
Did anybody already test it too?
Robby.
Did you also try sending a mail in kmail? For me, this is broken beginning from TW 20161217, too. The mail to be sent is stuck in outbox. In the output of akonadictl I see: /usr/bin/akonadi_maildispatcher_agent: symbol lookup error: /usr/bin/akonadi_maildispatcher_agent: undefined symbol: _ZN13MailTransport22SentBehaviourAttributeC1ENS0_13SentBehaviourERKN7Akonadi10CollectionE org.kde.pim.akonadiserver: Shutting down "akonadi_maildispatcher_agent" ... org.kde.pim.akonadicontrol: ProcessControl: Application '/usr/bin/akonadi_maildispatcher_agent' returned with exit code 127 (Unknown error)
Unfortunately this can't be even recovered by akonadictl restart.
* René Krell renda.krell@gmail.com [12-18-16 18:23]:
2016-12-18 15:21 GMT+01:00 Robby Engelmann robby.engelmann@igfs-ev.de:
I already upgraded my system to the mentioned snapshot containing KDE Apps 16.12.0. I had some trouble opening Mails in Kontact/Kmail. After 2 seconds a window appears stating something with "retrieving..." and akonadiserver crashing sometimes on system shutdown and closing Kontact. Thus, I was not able to open a mail.
Went back to the versions from Factory_Standard and here all is fine again.
Did anybody already test it too?
Robby.
Did you also try sending a mail in kmail? For me, this is broken beginning from TW 20161217, too. The mail to be sent is stuck in outbox. In the output of akonadictl I see: /usr/bin/akonadi_maildispatcher_agent: symbol lookup error: /usr/bin/akonadi_maildispatcher_agent: undefined symbol: _ZN13MailTransport22SentBehaviourAttributeC1ENS0_13SentBehaviourERKN7Akonadi10CollectionE org.kde.pim.akonadiserver: Shutting down "akonadi_maildispatcher_agent" ... org.kde.pim.akonadicontrol: ProcessControl: Application '/usr/bin/akonadi_maildispatcher_agent' returned with exit code 127 (Unknown error)
Unfortunately this can't be even recovered by akonadictl restart.
tw w/kmail-16.12.0-7.1.x86_64
sending works for me
2016-12-19 0:31 GMT+01:00 Patrick Shanahan:
tw w/kmail-16.12.0-7.1.x86_64
sending works for me
Interesting flavors of this issue - for me the message was hanging in outbox even after reboot with the latest TW 20161217. This sequence solved it for me at the moment:
rpm -Uvh http://download.opensuse.org/repositories/KDE:/Applications/openSUSE_Factory... http:// download.opensuse.org/repositories/KDE:/Applications/openSUSE_Factory_standard/x86_64/kdepim-runtime-debuginfo-16.12.0-65.1.x86_64.rpm akonadictl start
At that moment the message was sent immediately.
* René Krell renda.krell@gmail.com [12-19-16 06:05]:
2016-12-19 0:31 GMT+01:00 Patrick Shanahan:
tw w/kmail-16.12.0-7.1.x86_64
sending works for me
Interesting flavors of this issue - for me the message was hanging in outbox even after reboot with the latest TW 20161217. This sequence solved it for me at the moment:
rpm -Uvh http://download.opensuse.org/repositories/KDE:/Applications/openSUSE_Factory... http:// download.opensuse.org/repositories/KDE:/Applications/openSUSE_Factory_standard/x86_64/kdepim-runtime-debuginfo-16.12.0-65.1.x86_64.rpm akonadictl start
At that moment the message was sent immediately.
I have/had: tw 20161217 kdepim-runtime-16.12.0-65.1.x86_64
-
Bruno Friedmann -
Carl Symons -
Constant Brouerius van Nidek -
Knurpht - Gertjan Lettink -
Luca Beltrame -
Patrick Shanahan -
Raymond Wooninck -
René Krell -
Robby Engelmann