I found in my pc an outgoing and constant traffic of about 180 kbits/sec:
With "netstat -anp" I got:
The relevant lines are:
With Wireshark obtained a similar result:
No. Time Source Destination Protocol Length Info
1 0.000000000 192.168.1.5 224.0.0.56 UDP 1334 35637 → 46622 Len=1292
2 0.007332847 192.168.1.5 224.0.0.56 UDP 1334 35637 → 46622 Len=1292
3 0.014873637 192.168.1.5 224.0.0.56 UDP 1334 35637 → 46622 Len=1292
4 0.022377510 192.168.1.5 224.0.0.56 UDP 1334 35637 → 46622 Len=1292
5 0.026154002 192.168.1.5 224.0.0.56 UDP 1334 35637 → 46622 Len=1292
6 0.033521088 192.168.1.5 224.0.0.56 UDP 1334 35637 → 46622 Len=1292
7 0.040643769 192.168.1.5 224.0.0.56 UDP 1334 35637 → 46622 Len=1292
8 0.048071838 192.168.1.5 224.0.0.56 UDP 1334 35637 → 46622 Len=1292
9 0.055113545 192.168.1.5 224.0.0.56 UDP 1334 35637 → 46622 Len=1292
10 0.062537718 192.168.1.5 224.0.0.56 UDP 1334 35637 → 46622 Len=1292
11 0.069951504 192.168.1.5 224.0.0.56 UDP 1334 35637 → 46622 Len=1292
I find that could disable this traffic with the command as user:
pactl unload-module module-rtp-send
https://github.com/tsayen/audio-switch/issues/1
But I must do this anytime I switch off and on my pc.
In which configuration file can I disable the loading of this pulseaudio module
module-rtp-send?
Thanks,
Juan