recently I replaced my backup disk (/dev/sdb1) to a bigger one (5Tb -> 12Tb), after a cold start or "shut down" the new disk is not recognized (lsblk, lsscsi, lspci), after "reboot" it is available and works smoothly- any timeouts to adjust?? For debugging I installed a fresh TW. The relevant output from dmesg:
### after shutdown: dmesg | grep -5 sda [ 1.701192] ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.703234] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20191018/psargs-330) [ 1.704782] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20191018/psparse-529) [ 1.706651] ata1.00: configured for UDMA/133 [ 1.708478] scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4H PQ: 0 ANSI: 5 [ 1.710730] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.712735] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.713787] scsi 4:0:0:0: CD-ROM hp DVD-RAM GH82N R204 PQ: 0 ANSI: 5 [ 1.714667] sd 0:0:0:0: [sda] Write Protect is off [ 1.718602] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.718627] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.754083] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 [ 1.756311] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.758861] Freeing unused decrypted memory: 2040K ... ### after reboot: dmesg | grep -5 sda [ 1.682184] ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.684039] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20191018/psargs-330) [ 1.685428] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20191018/psparse-529) [ 1.687191] ata1.00: configured for UDMA/133 [ 1.688808] scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4H PQ: 0 ANSI: 5 [ 1.690687] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.692109] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.693523] sd 0:0:0:0: [sda] Write Protect is off [ 1.693539] scsi 4:0:0:0: CD-ROM hp DVD-RAM GH82N R204 PQ: 0 ANSI: 5 [ 1.695598] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.697724] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.730187] scsi 5:0:0:0: Direct-Access ATA TOSHIBA HDWG21C 0601 PQ: 0 ANSI: 5 [ 1.732720] sd 5:0:0:0: [sdb] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB) [ 1.734784] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 1.737007] sd 5:0:0:0: [sdb] Write Protect is off [ 1.737073] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 [ 1.740251] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.743566] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.744947] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.798228] sdb: sdb1 [ 1.800589] sd 5:0:0:0: [sdb] Attached SCSI disk [ 1.803812] Freeing unused decrypted memory: 2040K ... <<<
Uwe -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org