2015-04-28 9:37 GMT+02:00 ellanios82
On 04/28/2015 02:20 AM, Carlos E. R. wrote:
And butane is just it, and cheap. Previously freon was optimal, till it was found how damaging it was to the ozone layer... so it was forbidden.
__________
- just a remark :: Electrolux swedish vacuum cleaners used to have a plug , under the air-filter , into which plug one could insert a tube to "blow" { instead of suck}
Don't worry, I know where I can get a can of compressed air, I will just need some time. ;) I found some more information on the issue, while randomly googling. It turns out that not all archives on my past issue are on a now-deleted distribution forum, I also asked a question on superuser : http://superuser.com/q/446610/119172 So apparently I remembered things wrong, the fan sensor has always been misreporting low speeds as 4090-ish rpm. It also appears that the problem I had 3 years ago was really close to the one I have today, except that back then, pwm1_enable was working as expected (and so I could turn the fan to max speed at start, so that I could investigate the problem without the computer shutting down). I should have kept a trace of what I did to fix the issue back then... All that I remember was that it involved booting with different acpi_osi settings, maybe tweaking some values in the /sys/class/hwmon folders, maybe also loading and unloading some modules (there were several competing drivers for eeepc acpi)... Ok, no panic, easy things first, first the dust. Thibaut -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org