December 2021 - openSUSE Factory - openSUSE Mailing Lists

openSUSE:Factory - Build fail notification
by DimStar / Dominique Leuenberger 11 Dec '21

11 Dec '21

Dear Package maintainers and hackers. Below package(s) in openSUSE:Factory have been failing to build for at least 4 weeks. We tried to send out notifications to the configured bugowner/maintainers of the package(s), but so far no fix has been submitted. This probably means that the maintainer/bugowner did not yet find the time to look into the matter and he/she would certainly appreciate help to get this sorted. - rspamd Unless somebody is stepping up and submitting fixes, the listed package(s) are going to be removed from openSUSE:Factory. Kind regards, DimStar / Dominique Leuenberger <dimstar(a)opensuse.org>

1 0

su problem after upgrade
by Miko 11 Dec '21

11 Dec '21

Not sure this is a Tumbleweed issue but the other day I realized that su/kde-su doesn't work anymore: > su Password: su: Authentication service cannot retrieve authentication info /var/log/messages: 2021-12-11T09:52:58.007673+01:00 localhost unix_chkpwd[10249]: check pass; user unknown 2021-12-11T09:52:58.007775+01:00 localhost unix_chkpwd[10249]: password check failed for user (root) 2021-12-11T09:52:58.007907+01:00 localhost su: pam_unix(su:auth): authentication failure; logname= uid=1000 euid=1000 tty=/dev/pts/2 ruser=johndoe rhost= user=root 2021-12-11T09:53:00.664084+01:00 localhost su: FAILED SU (to root) johndoe on pts/2 (login with root did work) Thanks to the fantastic snapper possibilities it turns out that this started to happen right after upgrading from snapshot 20211102 to 20211126 and wasn't solved by upgrading to newer snapshots. Long story short: the file permissions of su changed during that upgrade (util-linux package?): Old: -rwsr-xr-x New: -rwxr-xr-x So I solved it by setting the setuid bit again: sudo chmod u+s /usr/bin/su But is this the correct solution or could the root cause be something else? -Miko

2 2

New Tumbleweed snapshot 20211209 released!
by Dominique Leuenberger 10 Dec '21

10 Dec '21

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: flatpak libffi (3.3.git30 -> 3.4.2) nvme-cli (1.15 -> 1.16) python-Mako (1.1.5 -> 1.1.6) python-alembic (1.7.4 -> 1.7.5) python-charset-normalizer (2.0.8 -> 2.0.9) python-importlib-metadata (4.8.1 -> 4.8.2) python-lxml (4.6.3 -> 4.6.4) python-matplotlib python-networkx python-numpy (1.21.2 -> 1.21.4) python-pbr (5.7.0 -> 5.8.0) python-pybind11 (2.8.0 -> 2.8.1) python-pycparser (2.20 -> 2.21) python-pydot python-pyparsing (2.4.7 -> 3.0.6) python-simplejson (3.17.5 -> 3.17.6) python-yarl (1.6.3 -> 1.7.2) spice-gtk === Details === ==== flatpak ==== Subpackages: libflatpak0 system-user-flatpak - Add patch support-new-pyparsing.patch: * Support pyparsing >= 3.0.4. ==== libffi ==== Version update (3.3.git30 -> 3.4.2) Subpackages: libffi8 libffi8-32bit - disable static trampolines (bsc#1193272) - update to 3.4.2: * Add static trampoline support for Linux on x86_64 and ARM64. * Add support for Alibaba's CSKY architecture. * Add support for Kalray's KVX architecture. * Add support for Intel Control-flow Enforcement Technology (CET). * Add support for ARM Pointer Authentication (PA). * Fix 32-bit PPC regression. * Fix MIPS soft-float problem. * Enable tmpdir override with the $LIBFFI_TMPDIR environment variable. * Enable compatibility with MSVC runtime stack checking. * Reject float and small integer argument in ffi_prep_cif_var(). * Callers must promote these types themselves. - drop aarch64.patch: fixed upstream differently - drop info dependency, uses file triggers now ==== nvme-cli ==== Version update (1.15 -> 1.16) Subpackages: nvme-cli-bash-completion - Update to version 1.16: + Print ProductName found even if subvendor/subdevice is unknown. + Add New fields on PEL based on NVMe 2.0a. + nvme-cli: - Split media units written/read into hi/lo 64 bit fields. - Add support for new SN650 device. - Update WDC pluging version to 1.15.3. - fix the [data|mdata]_len param (boo#1193547). - Add support for C3/Latency Monitor Log page parsing. - ctrl-loss-tmo should accept -1 as value. + nvme: add spinup control feature (fid=0x1A). + nvme: Add Identify for CNS 08h NVMe spec 2.0a based. + nvme: add boot partition log support. + nvme: add support for fid supported and effects log(lid = 0x12). + add identify endurance group list (cns 0x19) support. + add json support for zns report zones. + fabrics: fix 'nvme discover' segfault if sysfs path is not available. ==== python-Mako ==== Version update (1.1.5 -> 1.1.6) - update to 1.1.6: * Fixed issue where control statements on multi lines with a backslash would not parse correctly if the template itself contained CR/LF pairs as on Windows. ==== python-alembic ==== Version update (1.7.4 -> 1.7.5) - update to 1.7.5: * Adjustments to the test suite to accommodate for error message change in newer SQLAlchemy ==== python-charset-normalizer ==== Version update (2.0.8 -> 2.0.9) - update to 2.0.9: * Moderating the logging impact (since 2.0.8) for specific environments * Wrong logging level applied when setting kwarg `explain` to True ==== python-importlib-metadata ==== Version update (4.8.1 -> 4.8.2) - update to 4.8.2: * #353: Fixed discovery of distributions when path is empty. ==== python-lxml ==== Version update (4.6.3 -> 4.6.4) - update to 4.6.4: * A new property ``system_url`` was added to DTD entities. * The ``STATIC_*`` variables in ``setup.py`` can now be passed via env vars. - remove python-lxml-test_etree.patch (upstream) ==== python-matplotlib ==== Subpackages: python38-matplotlib python38-matplotlib-cairo python38-matplotlib-gtk3 python38-matplotlib-tk - Skip some broken tests with new pyparsing. ==== python-networkx ==== - Add patch xfail-pydot-tests.patch: * From upstream, survive pydot test failures. ==== python-numpy ==== Version update (1.21.2 -> 1.21.4) - Fix abbreviated references - Update to 1.21.4: * #20278: BUG: Fix shadowed reference of dtype in type stub * #20293: BUG: Fix headers for universal2 builds * #20294: BUG: VOID_nonzero could sometimes mutate alignment flag * #20295: BUG: Do not use nonzero fastpath on unaligned arrays * #20296: BUG: Distutils patch to allow for 2 as a minor version (!) * #20297: BUG, SIMD: Fix 64-bit/8-bit integer division by a scalar * #20298: BUG, SIMD: Workaround broadcasting SIMD 64-bit integers on MSVC... * #20300: REL: Prepare for the NumPy 1.21.4 release. * #20302: TST: Fix a Arrayterator typing test failure - Release to 1.21.3: * #19745: ENH: Add dtype-support to 3 `generic/ndarray methods * #19955: BUG: Resolve Divide by Zero on Apple silicon + test failures... * #19958: MAINT: Mark type-check-only ufunc subclasses as ufunc aliases... * #19994: BUG: np.tan(np.inf) test failure * #20080: BUG: Correct incorrect advance in PCG with emulated int128 * #20081: BUG: Fix NaT handling in the PyArray_CompareFunc for datetime... * #20082: DOC: Ensure that we add documentation also as to the dict for... * #20106: BUG: core: result_type(0, np.timedelta64(4)) would seg. fault. - Add patch to fix aarch64 support: * numpy-fix-cpu_asimdfhm.patch ==== python-pbr ==== Version update (5.7.0 -> 5.8.0) - update to 5.8.0: * Add python2 testing back to PBR * Allow PEP517 without setup\_requires * Clarify the need for setup.py with PEP517 ==== python-pybind11 ==== Version update (2.8.0 -> 2.8.1) - udpate to 2.8.1: * The simple namespace creation shortcut added in 2.8.0 was deprecated due to usage of CPython internal API, and will be removed soon. * Add C++ Exception type to throw and catch ``AttributeError``. * Fixed the potential for dangling references when using properties with ``std::optional`` types. * Modernize usage of ``PyCodeObject`` on Python 3.9+ (moving toward support for Python 3.11a1) * A long-standing bug in ``eigen.h`` was fixed (originally PR #3343). The bug was unmasked by newly added ``static_assert``'s in the Eigen 3.4.0 release. * Support multiple raw inclusion of CMake helper files * Fix harmless warning on upcoming CMake 3.22. * Fix 2.8.0 regression with MSVC 2017 + C++17 mode + Python 3. * Fix 2.8.0 regression that caused undefined behavior (typically segfaults) in ``make_key_iterator``/``make_value_iterator`` if dereferencing the iterator returned a temporary value instead of a reference. ==== python-pycparser ==== Version update (2.20 -> 2.21) - update to 2.21: - Much improved support for C11 (multiple PRs) - Support for parehthesized compount statements (#423) - Support for modern Python versions (3.9 and 3.10) - Fix support for structs with nested enums (#387) - Multiple small bug fixes ==== python-pydot ==== - skip failing tests ==== python-pyparsing ==== Version update (2.4.7 -> 3.0.6) - requires jinja2 for testing - requires railroad-diagrams for testing - update to 3.0.6: * Added suppress_warning() method to individually suppress a warning on a specific ParserElement. Used to refactor original_text_for to preserve internal results names, which, while undocumented, had been adopted by some projects. * Fix bug when delimited_list was called with a str literal instead of a parse expression. - changes from 3.0.5: * Added return type annotations for col, line, and lineno. * Fixed bug when warn_ungrouped_named_tokens_in_collection warning was raised when assigning a results name to an original_text_for expression. (Issue #110, would raise warning in packaging.) * Fixed internal bug where ParserElement.streamline() would not return self if already streamlined. * Changed run_tests() output to default to not showing line and column numbers. If line numbering is desired, call with with_line_numbers=True. Also fixed minor bug where separating line was not included after a test failure. - changes from 3.0.4: * Fixed bug in which Dict classes did not correctly return tokens as nested ParseResults * Documented API-changing side-effect of converting ParseResults to use __slots__ to pre-define instance attributes. * Fixed bug in railroad diagramming where the vertical limit would count all expressions in a group, not just those that would create visible railroad elements. - changes from 3.0.3: * Fixed regex typo in one_of fix for as_keyword=True. * Fixed a whitespace-skipping bug, Issue #319, introduced as part of the revert of the LineStart changes. * Added header column labeling > 100 in with_line_numbers - some input lines are longer than others. - changes from 3.0.2: * Reverted change in behavior with LineStart and StringStart, which changed the interpretation of when and how LineStart and StringStart should match when a line starts with spaces. In 3.0.0, the xxxStart expressions were not really treated like expressions in their own right, but as modifiers to the following expression when used like LineStart() + expr, so that if there were whitespace on the line before expr (which would match in versions prior to 3.0.0), the match would fail. 3.0.0 implemented this by automatically promoting LineStart() + expr to AtLineStart(expr), which broke existing parsers that did not expect expr to necessarily be right at the start of the line, but only be the first token found on the line. This was reported as a regression in Issue (gh#pyparsing/pyparsing/issues#317). In 3.0.2, pyparsing reverts to the previous behavior, but will retain the new AtLineStart and AtStringStart expression classes, so that parsers can chose whichever behavior applies in their specific instance. * Performance enhancement to one_of to always generate an internal Regex, even if caseless or as_keyword args are given as True (unless explicitly disabled by passing use_regex=False). * IndentedBlock class now works with recursive flag. By default, the results parsed by an IndentedBlock are grouped. This can be disabled by constructing the IndentedBlock with grouped=False. - changes from 3.0.1 * Fixed bug where Word(max=n) did not match word groups less than length 'n'. Thanks to Joachim Metz for catching this! * Fixed bug where ParseResults accidentally created recursive contents. Joachim Metz on this one also! * Fixed bug where warn_on_multiple_string_args_to_oneof warning is raised even when not enabled. - changes from 3.0.0 * A consolidated list of all the changes in the 3.0.0 release can be found in docs/whats_new_in_3_0_0.rst. (https://github.com/pyparsing/pyparsing/blob/master/docs/whats_new_in_3_0_0.…) - disable build for python2, not supported anymore ==== python-simplejson ==== Version update (3.17.5 -> 3.17.6) - update to 3.17.6: * Declare support for Python 3.10 and add wheels ==== python-yarl ==== Version update (1.6.3 -> 1.7.2) - version update to 1.7.2 - Changed call in ``with_port()`` to stop reencoding parts of the URL that were already encoded. (`#623 <https://github.com/aio-libs/yarl/issues/623>`_) - Add `__bytes__()` magic method so that `bytes(url)` will work and use optimal ASCII encoding. (`#582 <https://github.com/aio-libs/yarl/issues/582>`_) - Started shipping platform-specific arm64 wheels for Apple Silicon. (`#622 <https://github.com/aio-libs/yarl/issues/622>`_) - Started shipping platform-specific wheels with the ``musl`` tag targeting typical Alpine Linux runtimes. (`#622 <https://github.com/aio-libs/yarl/issues/622>`_) - Added support for Python 3.10. (`#622 <https://github.com/aio-libs/yarl/issues/622>`_) - do not require pytest-runner for build, it is not needed ==== spice-gtk ==== Subpackages: libspice-client-glib-2_0-8 libspice-client-glib-helper libspice-client-gtk-3_0-5 - Add patch support-new-pyparsing.patch: * Use -c 'import foo' to check for module existance.

1 0

/usr/bin/ld.so as a symbolic link
by Florian Weimer 10 Dec '21

10 Dec '21

I guess I should bring this up here as well. I've submitted a proposal to glibc upstream to install a symbolic link to the dynamic linker under /usr/bin/ld.so: [PATCH v3] elf: Install a symbolic link to ld.so as /usr/bin/ld.so <https://sourceware.org/pipermail/libc-alpha/2021-December/133952.html> This allows scripts to invoke dynamic linker features (e.g., ld.so --list-diagnostics) without hard-coding a specific path. It's still a bit rough around the edges (e.g., we can't launch binaries across architectures), but we've already fixed launching of executables that are not actually dynamically linked. I'm pretty sure OpenSUSE ships an ld.so(8) manual page already. It should be moved/linked to ld.so(1). (/usr/bin is the right directory because running ld.so does not need special privileges.) What do you think about this? Thanks, Florian

2 4

Tumbleweed - Review of the week 2021/49
by Dominique Leuenberger / DimStar 10 Dec '21

10 Dec '21

Dear Tumbleweed users and hackers, Unfortunately, we could not keep up the daily streak of snapshots during this week. We ‘only’ managed to push out 6 snapshots. Over the last weekend, we had an openQA-worker causing some troubles, which resulted in not sufficient throughput to get anything ready to publish. But 6 snapshots is still acceptable, isn’t it? Anyway, we had the following releases: 1202, 1203, 1205, 1206, 1207, and 1208. The main changes included were: * KDE Plasma 5.23.4 * Automake 1.16.5 * sssd 2.6.1 * Harfbuzz 3.1.1: as announced, sadly with an ABI break. I triggered a rebuild of everything behind harfbuzz, so unless packages explicitly used the lost API, they should be back in shape at least. One known fallout is still electron, which I have a submission on the queue, scheduled for snapshot 1210. * Linux kernel 5.15.6 * Mesa 21.3.1 * gc 8.2.0 * Poppler 21.12.0 * strace 5.15 * GCC 11: Enable the full cross compiler, cross-aarch64-gcc11 and cross-riscv64-gcc11 now provide a fully hosted C (and C++) cross compiler, not just a freestanding one Stagings are almost all filled, and you can expect these changes coming to Tumbleweed soon: * Linux kernel 5.15.7 * Mozilla Firefox 95.0 * Rust 1.57 * Kubernetes 1.23 * KDE Applications 21.12.0 * GNOME 41.2 * Moving default php version from php7 to php8 * Testing the results when moving system ruby from 2.7 to 3.0: YaST team is working on the main fallouts * Enabling the build of python310-* modules; the move of the devault python3 provider to python310 should follow soon after * pipewire 0.3.40, with a move to from pipewire-media-session to wireplumber; currently failing openQA * openSSL 3.0 Cheers, Dominique

1 0

Unstable AMD Driver?
by Frans de Boer 10 Dec '21

10 Dec '21

LS, Recently I bought a Radeon RX 6600 XT card from Gigabyte. But I noticed quite quickly that my system has issues. 95% of the time I try to wake the system - only the screen is switched off after sometime, no system suspend - the system input and display freezes. I noticed that the drive LED is still working, so assume that the rest of the system is still working. Thinking that the PSU might not up-to it's task with this new card, I upgraded that too. It seemed to go better, but still have these freezes from time to time. Below is a snippet from the log file around the time the system freezes. The GPU seems to have issues, from which the software does not seem to recover: -----------------------------> Dec 8 18:51:59 pws1 kernel: [drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3 Dec 8 18:52:02 pws1 kernel: snd_hda_intel 0000:03:00.1: refused to change power state from D3hot to D0 Dec 8 18:52:02 pws1 kernel: snd_hda_intel 0000:03:00.1: CORB reset timeout#2, CORBRP = 65535 Dec 8 18:52:02 pws1 kernel: [drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3 Dec 8 18:52:02 pws1 kernel: snd_hda_codec_hdmi hdaudioC1D0: Unable to sync register 0x2f0d00. -5 Dec 8 18:52:02 pws1 rtkit-daemon[6110]: Supervising 7 threads of 4 processes of 1 users. Dec 8 18:52:02 pws1 rtkit-daemon[6110]: Successfully made thread 23363 of process 6103 owned by 'frans' RT at priority 5. Dec 8 18:52:02 pws1 rtkit-daemon[6110]: Supervising 8 threads of 4 processes of 1 users. Dec 8 18:52:05 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: Failed to export SMU metrics table! Dec 8 18:52:08 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command! Dec 8 18:52:08 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: Failed to export SMU metrics table! Dec 8 18:52:12 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command! Dec 8 18:52:12 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: Failed to export SMU metrics table! Dec 8 18:52:12 pws1 kernel: [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx_0.0.0 timeout, signaled seq=2453204, emitted seq=2453206 Dec 8 18:52:12 pws1 kernel: [drm:amdgpu_job_timedout [amdgpu]] *ERROR* Process information: process Xorg.bin pid 1860 thread Xorg.bin:cs0 pid 1882 Dec 8 18:52:12 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: GPU reset begin! Dec 8 18:52:12 pws1 kernel: clocksource: Switched to clocksource acpi_pm Dec 8 18:52:12 pws1 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125! Dec 8 18:52:16 pws1 kernel[1780]: Last message '[drm:amdgpu_cs_ioctl' repeated 9 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:52:15 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command! Dec 8 18:52:15 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff! Dec 8 18:52:20 pws1 kernel: [drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3 Dec 8 18:52:29 pws1 kernel: amdgpu 0000:03:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_2.1.0 test failed (-110) Dec 8 18:52:29 pws1 kernel: [drm:gfx_v10_0_hw_fini [amdgpu]] *ERROR* KGQ disable failed Dec 8 18:52:29 pws1 kernel: amdgpu 0000:03:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_2.1.0 test failed (-110) Dec 8 18:52:29 pws1 kernel: [drm:gfx_v10_0_hw_fini [amdgpu]] *ERROR* KCQ disable failed Dec 8 18:52:29 pws1 kernel: [drm:gfx_v10_0_hw_fini [amdgpu]] *ERROR* failed to halt cp gfx Dec 8 18:52:33 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command! Dec 8 18:52:33 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features. Dec 8 18:52:33 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features! Dec 8 18:52:33 pws1 kernel: [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62 Dec 8 18:52:33 pws1 kernel: [drm] free PSP TMR buffer Dec 8 18:52:34 pws1 kernel: [drm] psp gfx command DESTROY_TMR(0x7) failed and response status is (0x80000306) Dec 8 18:52:34 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: MODE1 reset Dec 8 18:52:34 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset Dec 8 18:52:34 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: GPU smu mode1 reset Dec 8 18:52:37 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command! Dec 8 18:52:37 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset failed Dec 8 18:52:37 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: ASIC reset failed with error, -62 for drm dev, 0000:03:00.0 Dec 8 18:52:48 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: GPU reset succeeded, trying to resume Dec 8 18:52:48 pws1 kernel: [drm] PCIE GART of 512M enabled (table at 0x00000080005A4000). Dec 8 18:52:48 pws1 kernel: [drm] VRAM is lost due to GPU reset! Dec 8 18:52:48 pws1 kernel: [drm] PSP is resuming... Dec 8 18:52:49 pws1 kernel: [drm] failed to load ucode SMC(0x18) Dec 8 18:52:49 pws1 kernel: [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0x80000306) Dec 8 18:52:49 pws1 kernel: [drm] reserve 0xa00000 from 0x81fe000000 for PSP TMR Dec 8 18:52:51 pws1 kernel: [drm] psp gfx command AUTOLOAD_RLC(0x21) failed and response status is (0x0) Dec 8 18:52:51 pws1 kernel: [drm:psp_load_non_psp_fw [amdgpu]] *ERROR* Failed to start rlc autoload Dec 8 18:52:51 pws1 kernel: [drm:psp_resume [amdgpu]] *ERROR* PSP resume failed Dec 8 18:52:51 pws1 kernel: [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* resume of IP block <psp> failed -22 Dec 8 18:52:51 pws1 kernel: [drm] Skip scheduling IBs! Dec 8 18:52:52 pws1 kernel[1780]: Last message '[drm] Skip schedulin' repeated 3 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:52:51 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: GPU reset(2) failed Dec 8 18:52:51 pws1 kernel: [drm] Skip scheduling IBs! Dec 8 18:52:52 pws1 kernel[1780]: Last message '[drm] Skip schedulin' repeated 36 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:52:51 pws1 kernel: amdgpu_cs_ioctl: 22 callbacks suppressed Dec 8 18:52:51 pws1 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125! Dec 8 18:52:52 pws1 kernel[1780]: Last message '[drm:amdgpu_cs_ioctl' repeated 5 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:52:51 pws1 kernel: snd_hda_intel 0000:03:00.1: refused to change power state from D3hot to D0 Dec 8 18:52:51 pws1 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125! Dec 8 18:52:52 pws1 kernel[1780]: Last message '[drm:amdgpu_cs_ioctl' repeated 3 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:52:52 pws1 kernel: snd_hda_intel 0000:03:00.1: CORB reset timeout#2, CORBRP = 65535 Dec 8 18:52:52 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: GPU reset end with ret = -22 Dec 8 18:52:57 pws1 kernel: amdgpu_cs_ioctl: 43 callbacks suppressed Dec 8 18:52:57 pws1 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125! Dec 8 18:53:02 pws1 kernel[1780]: Last message '[drm:amdgpu_cs_ioctl' repeated 9 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:53:02 pws1 kernel: [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma1 timeout, signaled seq=20241, emitted seq=20243 Dec 8 18:53:02 pws1 kernel: [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, signaled seq=14909, emitted seq=14911 Dec 8 18:53:02 pws1 kernel: [drm:amdgpu_job_timedout [amdgpu]] *ERROR* Process information: process pid 0 thread pid 0 Dec 8 18:53:02 pws1 kernel[1780]: Last message '[drm:amdgpu_job_time' repeated 1 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:53:02 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: GPU reset begin! Dec 8 18:53:02 pws1 kernel[1780]: Last message 'amdgpu 0000:03:00.0:' repeated 1 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:53:02 pws1 kernel: amdgpu 0000:03:00.0: amdgpu: Bailing on TDR for s_job:4f11, as another already in progress Dec 8 18:53:02 pws1 kernel: amdgpu_cs_ioctl: 32 callbacks suppressed Dec 8 18:53:02 pws1 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125! Dec 8 18:53:08 pws1 kernel[1780]: Last message '[drm:amdgpu_cs_ioctl' repeated 9 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:53:07 pws1 kernel: amdgpu_cs_ioctl: 33 callbacks suppressed Dec 8 18:53:07 pws1 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125! Dec 8 18:53:13 pws1 kernel[1780]: Last message '[drm:amdgpu_cs_ioctl' repeated 9 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:53:12 pws1 kernel: amdgpu_cs_ioctl: 29 callbacks suppressed Dec 8 18:53:12 pws1 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125! Dec 8 18:53:18 pws1 kernel[1780]: Last message '[drm:amdgpu_cs_ioctl' repeated 9 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:53:17 pws1 kernel: amdgpu_cs_ioctl: 31 callbacks suppressed Dec 8 18:53:17 pws1 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125! Dec 8 18:53:23 pws1 kernel[1780]: Last message '[drm:amdgpu_cs_ioctl' repeated 9 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:53:22 pws1 kernel: amdgpu_cs_ioctl: 32 callbacks suppressed Dec 8 18:53:22 pws1 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125! Dec 8 18:53:28 pws1 kernel[1780]: Last message '[drm:amdgpu_cs_ioctl' repeated 9 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:53:28 pws1 kernel: amdgpu_cs_ioctl: 36 callbacks suppressed Dec 8 18:53:28 pws1 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125! Dec 8 18:53:33 pws1 kernel[1780]: Last message '[drm:amdgpu_cs_ioctl' repeated 9 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:53:33 pws1 kernel: amdgpu_cs_ioctl: 25 callbacks suppressed Dec 8 18:53:33 pws1 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125! Dec 8 18:53:38 pws1 kernel[1780]: Last message '[drm:amdgpu_cs_ioctl' repeated 9 times, suppressed by syslog-ng on pws1.fransdb.local Dec 8 18:53:38 pws1 kernel: amdgpu_cs_ioctl: 36 callbacks suppressed Dec 8 18:53:38 pws1 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125! <---------------------------- After the last line the system is totally unresponsive. Does anybody has an Idea whether this due to a driver bug, firmare bug or something else? System: Phenom II X4 965, 16 GB, Gigabyte Radeon RX 6600 XT pro with 4K screen. Regards, Frans. -- A: Yes, just like that A: Ja, net zo Q: Oh, Just like reading a book backwards Q: Oh, net als een boek achterstevoren lezen A: Because it upsets the natural flow of a story A: Omdat het de natuurlijke gang uit het verhaal haalt Q: Why is top-posting annoying? Q: Waarom is Top-posting zo irritant?

3 12

New Tumbleweed snapshot 20211208 released!
by Dominique Leuenberger 10 Dec '21

10 Dec '21

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: alsa (1.2.5.1 -> 1.2.6) alsa-plugins (1.2.5 -> 1.2.6) alsa-ucm-conf (1.2.5.1 -> 1.2.6) alsa-utils (1.2.5.1 -> 1.2.6) dbus-1-glib double-conversion (3.1.5 -> 3.1.6) emacs fftw3 (3.3.9 -> 3.3.10) fltk (1.3.7 -> 1.3.8) grub2 inkscape kmod libXfixes libserf libyui (4.2.21 -> 4.2.22) libyui-ncurses (4.2.21 -> 4.2.22) libyui-ncurses-pkg (4.2.21 -> 4.2.22) libyui-qt (4.2.21 -> 4.2.22) libyui-qt-graph (4.2.21 -> 4.2.22) libyui-qt-pkg (4.2.21 -> 4.2.22) live555 (2021.08.23 -> 2021.11.23) orca (41.0 -> 41.1) ovmf pcsc-lite (1.9.4 -> 1.9.5) perl-Try-Tiny (0.30 -> 0.31) python qemu re2 soundtouch (2.2 -> 2.3.1) sudo (1.9.7p2 -> 1.9.8p2) suse-module-tools (16.0.14+2 -> 16.0.16) susepaste virt-manager yast2-journal (4.4.0 -> 4.4.1) yast2-trans (84.87.20211126.cedf3cc035 -> 84.87.20211204.c55adb9b7a) yast2-users (4.4.9 -> 4.4.10) === Details === ==== alsa ==== Version update (1.2.5.1 -> 1.2.6) Subpackages: libasound2 libasound2-32bit libatopology2 - Update to version 1.2.6: lots of changes, including UCM and config updates and rawmidi framing mode support: for details, see below https://www.alsa-project.org/wiki/Changes_v1.2.5.1_v1.2.6#alsa-lib - Add *.sig file for the source tarball ==== alsa-plugins ==== Version update (1.2.5 -> 1.2.6) Subpackages: alsa-plugins-pulse alsa-plugins-pulse-32bit alsa-plugins-speexrate alsa-plugins-upmix - Update to version 1.2.6: Fixes for a52 plugin, jack, rate-lav. For details, see URL: https://alsa-project.org/wiki/Changes_v1.2.5.1_v1.2.6#alsa-plugins - Add *.sig file for the source tarball ==== alsa-ucm-conf ==== Version update (1.2.5.1 -> 1.2.6) - Update to version 1.2.6: various profile updates. See URL below for details: https://alsa-project.org/wiki/Changes_v1.2.5.1_v1.2.6#alsa-ucm-conf - Add *.sig file for the tarball - Explicit Requires for the libasound2 with the same or newer version ==== alsa-utils ==== Version update (1.2.5.1 -> 1.2.6) - Update to alsa-utils 1.2.6: various updates / fixes for alsactl, amidi, alsaloop, alsamixer, alsatplg, amixer, aplay and aseqnet. Details are found in https://alsa-project.org/wiki/Changes_v1.2.5.1_v1.2.6#alsa-utils - Update the download URL - Add *.sig file for the tarball ==== dbus-1-glib ==== - Add relevant dbus-1-glib-<targettype> provides/obsoletes also in baselibs.conf (boo#1193502). ==== double-conversion ==== Version update (3.1.5 -> 3.1.6) - update to 3.1.6: * Features some code cleanups. * Adds the following new architectures: loongarch, xtensa, nios2, e2k. ==== emacs ==== Subpackages: emacs-info emacs-nox emacs-x11 etags - Use %make_build macro. ==== fftw3 ==== Version update (3.3.9 -> 3.3.10) Subpackages: libfftw3-3 libfftw3_threads3 - update to 3.3.10: * Fix bug that would cause 2-way SIMD (notably SSE2 in double precision) to attempt unaligned accesses in certain obscure cases, causing segfaults. * This test computes a pair of length-4 real->complex transforms where the second input is 5 real numbers away from the first input. That is, there is a gap of one real number between the first and second input array. The -oexhaustive level allow FFTW to attempt to compute this transform by reducing it to a pair of complex transforms of length 2, but now the second input is not aligned to a complex-number boundary. The fact that 5 is odd is the problem. * The bug cannot occur in complex->complex transforms because the complex interface accepts strides in units of complex numbers, so strides are aligned by construction. ==== fltk ==== Version update (1.3.7 -> 1.3.8) - Update to 1.3.8: * Add new dialog with extended return values * Make "FLTK_CONSOLIDATE_MOTION" user-definable - Use bzip2 compressed sources ==== grub2 ==== Subpackages: grub2-i386-pc grub2-snapper-plugin grub2-systemd-sleep-plugin grub2-x86_64-efi grub2-x86_64-xen - Fix extent not found when initramfs contains shared extents (bsc#1190982) * 0001-fs-btrfs-Make-extent-item-iteration-to-handle-gaps.patch ==== inkscape ==== Subpackages: inkscape-extensions-extra inkscape-extensions-gimp inkscape-lang - Enable RPATH in cmake (bsc#1193183, bsc#1193261). ==== kmod ==== Subpackages: kmod-bash-completion libkmod2 - Ensure that kmod and packages linking to libkmod provide same features (bsc#1193430). ==== libXfixes ==== Subpackages: libXfixes-devel libXfixes3 libXfixes3-32bit - update to version 6.0 is needed for GNOME41, particularly the gnome-settings-daemon's new feature to disconnect from Xwayland (JIRA #SLE-22829) ==== libserf ==== - Update Source links - add openssl3.patch to avoid using removed functionality in an irrelvant place ==== libyui ==== Version update (4.2.21 -> 4.2.22) - Send a proper notify event from the YMultiSelectionBox widget when checking a check box via the REST API (bsc#1192574) - 4.2.22 ==== libyui-ncurses ==== Version update (4.2.21 -> 4.2.22) - Send a proper notify event from the YMultiSelectionBox widget when checking a check box via the REST API (bsc#1192574) - 4.2.22 ==== libyui-ncurses-pkg ==== Version update (4.2.21 -> 4.2.22) - Send a proper notify event from the YMultiSelectionBox widget when checking a check box via the REST API (bsc#1192574) - 4.2.22 ==== libyui-qt ==== Version update (4.2.21 -> 4.2.22) - Send a proper notify event from the YMultiSelectionBox widget when checking a check box via the REST API (bsc#1192574) - 4.2.22 ==== libyui-qt-graph ==== Version update (4.2.21 -> 4.2.22) - Send a proper notify event from the YMultiSelectionBox widget when checking a check box via the REST API (bsc#1192574) - 4.2.22 ==== libyui-qt-pkg ==== Version update (4.2.21 -> 4.2.22) - Send a proper notify event from the YMultiSelectionBox widget when checking a check box via the REST API (bsc#1192574) - 4.2.22 ==== live555 ==== Version update (2021.08.23 -> 2021.11.23) Subpackages: libBasicUsageEnvironment1 libUsageEnvironment3 libgroupsock30 - update to 2021.11.23: * Updated the "RTSPServer::setTLSState()" function to take an optional parameter "weServeSRTP". For now, the default value of this parameter is False, but it will get changed to True later, when we implement server-side SRTP. * Updated the RTSP server implementation to (optionally) support connections via TLS. * Updated the "TLSState" interface and implementation to (1) reduce the amount of stuff that the compiler gets to see if you're compiling with NO_OPENSSL defined, and (2) add a new subclass "ServerTLSState" that will eventually be used to implement optional TLS connections to our RTSP server. * Split the "TLSState" class into two classes: "TLSState" (an abstract base class), and "ClientTLSState" (a subclass). This is in preparation for later defining second subclass "ServerTLSState" that will eventually be used to implement TLS connections in our RTSP server. * Updated the implementation of AES encryption/decryption (used by our client SRTP implementation) to use the new OpenSSL EVP interface. This makes it possible to use hardware acceleration (e.g., AES-NI), when it is available. * Updated the "RTSPClient"s implementation of receiving RTP/RTCP-over-TCP so that it will also work over a RTSP-over-TLS (including RTSPS) connection. * Fixed a bug in "MatroskaFileParser" that could cause delivery of data to a downstream object that wasn't expecting it (potentially causing an invalid memory access). * The final (I hope!) update to eliminate a "depends on uninitialised value" report from 'valgrind'. ==== orca ==== Version update (41.0 -> 41.1) Subpackages: orca-lang - Update to version 41.1: + Web: - Fix presentation of selected items in datalist - Fix issue causing non-rendered headings being combined with other, rendered elements when presenting line contents - Improve behavior when focused back/forward button is pressed - Improve presentation of subscript and superscript elements (requires implementations exposing the associated AT-SPI2 roles) - Attempt to identify and present custom-element images - Fix SayAll for rich-text editors - Treat all list items inside listboxes as focus mode widgets regardless of authoring - Clear cached objects when not dumping full cache for child change to prevent skipping over newly-added content - Fix speech generator for browser alerts - Fix issues causing certain spin buttons to not be presented correctly + General: - Modify collections module import for Python3.10 compatibility - Event Manager: Handle name/description change floods - Adjust string for repeats when presenting text changes - Clear flat review context when page tab lists emit selection-changed to eliminate stale context (e.g. in a wizard) - Improve presentation of indeterminate progress bars (busy indicators) + Updated translations. ==== ovmf ==== Subpackages: qemu-ovmf-x86_64 qemu-uefi-aarch64 - cross-i386-binutils and cross-i386-gcc have been dropped from Factory, so use only cross-x86_64-* - boo#1193424 - Merge the difference from SLE for pushing back to SLE15-SP4 - Add/Update 50-xen-hvm-x86_64.json in descriptors.tar.xz - Add the json descriptor for xen-hvm (bsc#1180050) - Add "nvram-template" and change the firmware file to ovmf-x86_64-ms-4m.bin (bsc#1180050, bsc#1181264) - The following patches in SLE are already in edk2-edk2-stable202108 in factory, so they will be removed from 15-SP4 - ovmf-bsc1177789-cryptopkg-fix-null-dereference.patch to fix the potential NULL dereference in AuthenticodeVerify() (bsc#1177789, CVE-2019-14584) - 26442d11e620a9 edk2-stable202011~124 - ovmf-bsc1180079-amd-sev-es-mitigation.patch to mitigate the potential AMD SEV-ES security issues (bsc#1180079) - a91b700e385e74 edk2-stable202102~181 - ovmf-jscSLE-16075-SEV-ES-use-physical-address.patch as the follow-up patch for SEV-ES to fix the flash writing (jsc#SLE-16075) - 3a3501862f7309 edk2-stable202102~105 - ovmf-bsc1183578-lzma-catch-4GB.patch to fix the possible heap corruption (bsc#1183578, CVE-2021-28211) - e7bd0dd26db7e5 edk2-stable202011~7 - ovmf-bsc1183579-fix-fv-recursion.patch to fix unlimited FV recursion (bsc#1183579, CVE-2021-28210) - b9bdfc72853fe9 edk2-stable202011~9 - Add ovmf-bsc1186151-fix-iscsi-overflows.patch to fix the possible overflows in IScsiDxe (bsc#1186151) - 83761337ec91fb edk2-stable202108-rc0~171 ==== pcsc-lite ==== Version update (1.9.4 -> 1.9.5) Subpackages: libpcsclite1 - version 1.9.5 * pcscd: autoexit even if no client connects * Fix variable substitution in systemd units * fix potential race conditions with powerState handling * Add and use tag TAG_IFD_DEVICE_REMOVED * UnitaryTests: port code to Python 3 ==== perl-Try-Tiny ==== Version update (0.30 -> 0.31) - updated to 0.31 see /usr/share/doc/packages/perl-Try-Tiny/Changes 0.31 2021-11-23 20:29:12Z - plug Syntax::Keyword::Try and Feature::Compat::Try in the docs ==== python ==== - build against openssl 1.1.x (incompatible with openssl 3.0x) for now ==== qemu ==== Subpackages: qemu-accel-qtest qemu-accel-tcg-x86 qemu-arm qemu-audio-spice qemu-block-curl qemu-block-dmg qemu-block-gluster qemu-block-iscsi qemu-block-nfs qemu-block-rbd qemu-block-ssh qemu-chardev-baum qemu-chardev-spice qemu-guest-agent qemu-hw-display-qxl qemu-hw-display-virtio-gpu qemu-hw-display-virtio-gpu-pci qemu-hw-display-virtio-vga qemu-hw-usb-host qemu-hw-usb-redirect qemu-hw-usb-smartcard qemu-ipxe qemu-ksm qemu-kvm qemu-lang qemu-microvm qemu-ppc qemu-s390x qemu-seabios qemu-sgabios qemu-skiboot qemu-tools qemu-ui-curses qemu-ui-gtk qemu-ui-opengl qemu-ui-spice-app qemu-ui-spice-core qemu-vgabios qemu-vhost-user-gpu qemu-x86 * Patches added (bsc#1186256): qemu-binfmt-conf.sh-allow-overriding-SUS.patch - cross-i386-binutils and cross-i386-gcc are not needed and were dropped from Factory - boo#1193424 ==== re2 ==== - Use newer libs and GCC on Leap 15.3 & 15.4 ==== soundtouch ==== Version update (2.2 -> 2.3.1) - update to 2.3.1: * Adjusted cmake build settings and header files that cmake installs * Disable setting "SOUNDTOUCH_ALLOW_NONEXACT_SIMD_OPTIMIZATION" by default. The original purpose of this setting was to avoid performance penalty due to unaligned SIMD memory accesses in old CPUs, but that is not any more issue in concurrent CPU SIMD implementations and having this setting enabled can cause slight compromise in result quality. * soundtouch.clear() to really clear whole processing pipeline state. Earlier individual variables were left uncleared, which caused slightly different result if the same audio stream were processed again after calling clear(). * TDstretch to align initial offset position to be in middle of correlation search window. This ensures that with zero tempo change the output will be same as input. * Fix a bug in TDstrectch with too small initial skipFract value that occurred with certain processing parameter settings: Replace assert with assignment that corrects the situation. * Remove OpenMP "_init_threading" workaround from Android build as it's not needed with concurrent Android SDKs any more. ==== sudo ==== Version update (1.9.7p2 -> 1.9.8p2) Subpackages: sudo-plugin-python - update to 1.9.8p2 * Fixed a potential out-of-bounds read with "sudo -i" when the target user's shell is bash. This is a regression introduced in sudo 1.9.8. Bug #998. * sudo_logsrvd now only sends a log ID for first command of a session. There is no need to send the log ID for each sub-command. * Fixed a few minor memory leaks in intercept mode. * Fixed a problem with sudo_logsrvd in relay mode if "store_first" was enabled when handling sub-commands. A new zero-length journal file was created for each sub-command instead of simply using the existing journal file. - update to 1.9.8p1 * Fixed support for passing a prompt (sudo -p) or a login class (sudo -l) on the command line. This is a regression introduced in sudo 1.9.8. Bug #993. * Fixed a crash with "sudo ALL" rules in the LDAP and SSSD back-ends. This is a regression introduced in sudo 1.9.8. Bug #994. * Fixed a compilation error when the --enable-static-sudoers configure option was specified. This is a regression introduced in sudo 1.9.8 caused by a symbol clash with the intercept and log server protobuf functions. * It is now possible to transparently intercepting sub-commands executed by the original command run via sudo. Intercept support is implemented using LD_PRELOAD (or the equivalent supported by the system) and so has some limitations. The two main limitations are that only dynamic executables are supported and only the execl, execle, execlp, execv, execve, execvp, and execvpe library functions are currently intercepted. Its main use case is to support restricting privileged shells run via sudo. To support this, there is a new "intercept" Defaults setting and an INTERCEPT command tag that can be used in sudoers. For example: Cmnd_Alias SHELLS=/bin/bash, /bin/sh, /bin/csh, /bin/ksh, /bin/zsh Defaults!SHELLS intercept would cause sudo to run the listed shells in intercept mode. This can also be set on a per-rule basis. For example: Cmnd_Alias SHELLS=/bin/bash, /bin/sh, /bin/csh, /bin/ksh, /bin/zsh chuck ALL = INTERCEPT: SHELLS would only apply intercept mode to user "chuck" when running one of the listed shells. In intercept mode, sudo will not prompt for a password before running a sub-command and will not allow a set-user-ID or set-group-ID program to be run by default. The new intercept_authenticate and intercept_allow_setid sudoers settings can be used to change this behavior. * The new "log_subcmds" sudoers setting can be used to log additional commands run in a privileged shell. It uses the same mechanism as the intercept support described above and has the same limitations. * The new "log_exit_status" sudoers setting can be used to log the exit status commands run via sudo. This is also a corresponding "log_exit" setting in the sudo_logsrvd.conf eventlog stanza. * Support for logging sudo_logsrvd errors via syslog or to a file. Previously, most sudo_logsrvd errors were only visible in the debug log. * Better diagnostics when there is a TLS certificate validation error. * Using the "+=" or "-=" operators in a Defaults setting that takes a string, not a list, now produces a warning from sudo and a syntax error from inside visudo. * Fixed a bug where the "iolog_mode" setting in sudoers and sudo_logsrvd had no effect when creating I/O log parent directories if the I/O log file name ended with the string "XXXXXX". * Fixed a bug in the sudoers custom prompt code where the size parameter that was passed to the strlcpy() function was incorrect. No overflow was possible since the correct amount of memory was already pre-allocated. * The mksigname and mksiglist helper programs are now built with the host compiler, not the target compiler, when cross-compiling. Bug #989. * Fixed compilation error when the --enable-static-sudoers configure option was specified. This was due to a typo introduced in sudo 1.9.7. GitHub PR #113. - pack /usr/libexec/sudo/sudo/sudo_intercept.so ==== suse-module-tools ==== Version update (16.0.14+2 -> 16.0.16) - Update to version 16.0.16: * modprobe.d: split conf files (jsc#SLE-21626, boo#1193059) - Rather than shipping two large files with modprobe.d options (00-system.conf and 50-blacklist.conf), ship multiple small per-module files. This makes it easier for users to override distribution defaults. * blacklist isst_if_mbox_msr (bsc#1187196) * boot-sysctl: make sure file exists (fix for containers) * remove blacklist entry for snd_bt87x (bsc#1192974, bsc#51718) ==== susepaste ==== Subpackages: susepaste-screenshot - Add 0002-susepaste-add-image-paste-info.patch: Add info on posting an image to susepaste in the man page, (boo#1193400). ==== virt-manager ==== Subpackages: virt-install virt-manager-common - jsc#SLE-17735 - Support Oracle Linux as a guest VM. See also bsc#1192238 [Build58.2][KVM] The latest supported OracleLinux as guest versions are not included anywhere virtinst-add-oracle-linux-support.patch - bsc#1188223 - L3: Sles12sp3 DomU won't boot after adding phys hard drive virtinst-xenbus-disk-index-fix.patch - jsc#SLE-21540 Dev: Prefer UEFI when creating new virtual machines. Add a preferences option to allow users to default to UEFI when creating a new VM. Libvirt decides which firmware file to use. virtman-add-firmware-preferences.patch - Renamed patch virtinst-modify-gui-defaults.patch to virtman-modify-gui-defaults.patch ==== yast2-journal ==== Version update (4.4.0 -> 4.4.1) - Prepare code for ruby3 (bsc#1193192) - 4.4.1 ==== yast2-trans ==== Version update (84.87.20211126.cedf3cc035 -> 84.87.20211204.c55adb9b7a) Subpackages: yast2-trans-af yast2-trans-ar yast2-trans-bg yast2-trans-bn yast2-trans-bs yast2-trans-ca yast2-trans-cs yast2-trans-cy yast2-trans-da yast2-trans-de yast2-trans-el yast2-trans-en_GB yast2-trans-es yast2-trans-et yast2-trans-fa yast2-trans-fi yast2-trans-fr yast2-trans-gl yast2-trans-gu yast2-trans-hi yast2-trans-hr yast2-trans-hu yast2-trans-id yast2-trans-it yast2-trans-ja yast2-trans-jv yast2-trans-ka yast2-trans-km yast2-trans-ko yast2-trans-lo yast2-trans-lt yast2-trans-mk yast2-trans-mr yast2-trans-nb yast2-trans-nl yast2-trans-pa yast2-trans-pl yast2-trans-pt yast2-trans-pt_BR yast2-trans-ro yast2-trans-ru yast2-trans-si yast2-trans-sk yast2-trans-sl yast2-trans-sr yast2-trans-sv yast2-trans-ta yast2-trans-th yast2-trans-tr yast2-trans-uk yast2-trans-vi yast2-trans-wa yast2-trans-xh yast2-trans-zh_CN yast2-trans-zh_TW yast2-trans-zu - Update to version 84.87.20211204.c55adb9b7a: * New POT for text domain 'installation'. * Translated using Weblate (Japanese) * Translated using Weblate (Japanese) * Translated using Weblate (Ukrainian) * Translated using Weblate (Ukrainian) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Catalan) * Translated using Weblate (Slovak) * New POT for text domain 'update'. * New POT for text domain 'storage'. * New POT for text domain 'packager'. * New POT for text domain 'installation'. * New POT for text domain 'base'. * New POT for text domain 'add-on'. * Translated using Weblate (Portuguese) * Translated using Weblate (Portuguese) * Translated using Weblate (Portuguese) * New POT for text domain 'users'. * New POT for text domain 'installation'. * New POT for text domain 'autoinst'. * New POT for text domain 'update'. * Translated using Weblate (Japanese) ==== yast2-users ==== Version update (4.4.9 -> 4.4.10) - Prepare code for ruby3 (bsc#1193192) - 4.4.10

1 0

What to use as replacement for package otrs ?
by Andreas Vetter 10 Dec '21

10 Dec '21

Hi, otrs in TW and Leap is Community Edition of OTRS. This was abandoned by otrs.com last year or so. There were more than one forks. What will be our favourite replacement for otrs? It seems (looking into OBS) Chris (computersalat) had a look into otobo. But it is not in TW, not to speak of Leap. So I'm curious if it can be a replacement for the old otrs. Where will we go? -- Mit freundlichen Gruessen, Andreas Vetter

1 0

Re: reducing the number of repositories in Virtualization project
by Larry Finger 09 Dec '21

09 Dec '21

On 12/9/21 04:57, Olaf Hering wrote: > Am Wed, 8 Dec 2021 20:16:05 -0600 > schrieb Larry Finger <Larry.Finger(a)lwfinger.net>: > >> Please use Virtualization:virtualbox. > > This project is now yours: https://build.opensuse.org/project/show/Virtualization:virtualbox > > I think the kbuild pkg can be removed again, unless SLE_12_SP5 is supposed to be a target. If it is, gsoup and byacc need to be added, and a few tweaks in prjconf need to be done to deal with the X11 package names. Olaf, I got notice of some build errors where the package failed rpmlint with: The package contains some files that are flagged as forbidden in the Backports project. These happened for 15.3, 15.4, and SLE_15_SP2 and came in at 3 AM local time. When I checked at 11 AM, they were OK. Did you fix this problem? I added Factory to the Cc list to get an opinion on whether VirtualBox should build on SLE_12_SP5. As far as I remember, it never has and we can probably remove the kbuild package. If anyone objects, please let us know. Larry

2 1

Bugzilla Outage - 10 November 2021 between 10:00 and 10:30 CET
by SUSE IT Communications 09 Dec '21

09 Dec '21

[cid:image001.jpg@01D7EC5B.D6FCCDB0]<https://www.suse.com/> 9 November 2021 Bugzilla Outage for Maintenance Update [cid:image002.png@01D7EC5B.D6FCCDB0] IT Updates Bugzilla Outage planned for Thursday the 9th of December between 10:00 and 10:30 CET Bugzilla has a regular maintenance window every Thursday between 7-11 CET. This week’s maintenance update will result in a brief thirty-minute outage. What is this update? This update will result in the "found by" field no longer being labeled as "Novell Technical Services" and the name will be changed to "SUSE Technical Services". Additionally, the obsolete URL link that takes users to the "Innerweb.novell.com" will be removed. When the user clicks on "Found By" or "Service Priority" they will no longer be taken to the Novell Intranet login page. Call to Action? Take note of the outage time and avoid attempting to login during the 30-minute window on Thursday the 9th between 10 and 10:30 CET. Regards, SUSE IT Communications Back to top © 2021 SUSE, All Rights Reserved [cid:image003.png@01D7EC5B.D6FCCDB0]

1 0