September 2020 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] /etc/sysconfig vs. /etc/default
by Thorsten Kukuk 05 Oct '20

05 Oct '20

Hi, Currently we have two directories with similar usage: - /etc/default, seems to come from Debian, mainly used by upstream projects on openSUSE - /etc/sysconfig, mainly based on Red Hat, mainly used for start scripts written by us. I will ignore the subdirectories here. Both have files with in a KEY=VALUE format which can be sources by a shell. /etc/default is controlled by RPM, so changes in the config files lead to *.rpmsave or *.rpmnew files. /etc/sysconfig is controlled by fillup. Adding new variables is easy, changing defaults or removing variables is next to impossible in most cases. Why do I write this? No, I don't want to get rid of /etc/sysconfig, but bring up an idea how to solve quite some of the problems with updating sysconfig files. Many bug reports about sysconfig files get closed as "Wontfix", since changing defaults is really difficult, as we don't want to overwrite user made changes, and adjusting comments is next to impossible. As result, an user may have many sysconfig files with outdated comments and content after a longer time after installation. This can be very irritating or lead to not working configurations and frustrations as following this steps does not lead to success. Hey, we still have comments which tells the user that he has now to run SuSEconfig because of this! To run and manage our openSUSE containers via podman and systemd, we started with as example for the bind container: /etc/sysconfig/container-bind container-bind.service, which did contain: EnvironmentFile=/etc/sysconfig/container-bind and we run immeaditly into problems as there were typos in it which we couldn't fix in an easy way on already installed systems. But we have now /usr/etc and /usr/etc/default :) So /usr/etc/default/container-bind contains now the system default (fillup doesn't make sense here, as this file is RPM controlled and should not be changed by an user), and the user can override single variables by creating a file /etc/default/container-bind with just this modified variables. The container-bind.service looks now like: EnvironmentFile=/usr/etc/default/container-bind EnvironmentFile=-/etc/default/container-bind All update problems solved without the need to find out, if a variable is modified by an user or not. This is not a proposal to change now all sysconfig files, but I think many packages could benefit from such a change, especially if they are really old and the sysconfig template gets often changed. The packaging change is trivial: install the sysconfig template in /usr/etc/default/, adjust your docu and remove the fillup call. And you need to think about, if you want to rename the old sysconfig file to *.rpmsave or move it to /etc/default. Is this something we should propose as "best practise", or are there reasons not to do so we haven't found yet? Thorsten -- Thorsten Kukuk, Distinguished Engineer, Senior Architect SLES & MicroOS SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany Managing Director: Felix Imendoerffer (HRB 36809, AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

19 46

[opensuse-factory] New Tumbleweed snapshot 20200928 released!
by Dominique Leuenberger 30 Sep '20

30 Sep '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: dracut (050+suse.226.gb86d9bcf -> 050+suse.227.g7a9b782d) emacs-apel fcitx-zhuyin ghostscript-fonts-grops python-pygraphviz (1.5 -> 1.6) rubygem-diffy (3.3.0 -> 3.4.0) rubygem-fog-core (2.2.0 -> 2.2.3) timezone timezone-java transactional-update (2.24.1 -> 2.26) webkit2gtk3 (2.30.0 -> 2.30.1) xreader (2.2.2 -> 2.6.4) === Details === ==== dracut ==== Version update (050+suse.226.gb86d9bcf -> 050+suse.227.g7a9b782d) - Update to version 050+suse.227.g7a9b782d: * Revert "install: also install post weak dependencies of kernel modules" (boo#1177016) ==== emacs-apel ==== - add emacs-apel-fix-old-backquote.patch - fix TW build ==== fcitx-zhuyin ==== - Add fcitx-zhuyin-libpinyin.patch * libzhuyin has merged into libpinyin ==== ghostscript-fonts-grops ==== - ghostscript gs >= 9.50 needs "-dNOSAFER" to operate on files but pfbtopfa doesn't have that param ==== python-pygraphviz ==== Version update (1.5 -> 1.6) - update to 1.6: - Add Python 3.8 support - Drop Python 2.7 support - Update to SWIG 4.0.1 ==== rubygem-diffy ==== Version update (3.3.0 -> 3.4.0) updated to version 3.4.0 see installed CHANGELOG ==== rubygem-fog-core ==== Version update (2.2.0 -> 2.2.3) updated to version 2.2.3 see installed changelog.md 2.2.3 09/16/2020 ========================================================== Fix provider lookup to properly symbolize newly underscored names 2.2.2 09/15/2020 ========================================================== Fix #underscore name to be class method (instead of instance method) 2.2.1 09/15/2020 ========================================================== - Change to verify_host_key never in ssh/scp if supported - Allow either downcased and underscored provider names for broader compatability ==== timezone ==== - Fixup tzdata-china.diff: zone.tab and zone1970.tab MUST be tab delimited (boo#1176927). - modify tzdata-china.diff * systemd now reads zone1970.tab * link Asia/Shanghai to Asia/Beijing is enough and more precise ==== timezone-java ==== - modify tzdata-china.diff * systemd now reads zone1970.tab * link Asia/Shanghai to Asia/Beijing is enough and more precise ==== transactional-update ==== Version update (2.24.1 -> 2.26) Subpackages: transactional-update-zypp-config - Version 2.26 - Fix broken sync for second snapshot [boo#1176989] - Add new options to allow separate cleanup of snapshots and overlays - Check for existence of inotifywait before using it - Check that mount options don't exceed maximum length - Version 2.25.1 - Fix inotify watcher setup - Use log_{info,error} for more messages to avoid messing up Salt logs - Version 2.25 - Reduce number of overlays: Instead of using transparent overlays for all previous layers only add the previous snapshot's overlay; this will greatly reduce the number of overlays while still making sure that /etc changes in the running system will be visible in the next snapshot - When using --drop-if-no-change synchronize potential /etc changes with running system - Exclude all non-root-fs mounts from inotify watcher ==== webkit2gtk3 ==== Version update (2.30.0 -> 2.30.1) Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 libwebkit2gtk3-lang typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles - Update to version 2.30.1: + Bring back the environment variable to force single process mode when PSON is disabled. + Fix downloads started by an ephemeral web context. + Updated translations. ==== xreader ==== Version update (2.2.2 -> 2.6.4) Subpackages: libxreaderdocument3 libxreaderview3 xreader-lang xreader-plugin-epubdocument xreader-plugin-pdfdocument xreader-plugin-psdocument xreader-plugin-tiffdocument xreader-plugin-xpsdocument - Update to version 2.6.4. * Fix app version. - Update since 2.2.2. * l10n: Update translations * Fix compile warnings (#317) * Fix build: Fail on implicit function declarations (#321) * preview window/printing: Remove build conditionals for gtk+-unix-print-3.0 * Fix segfault on empty navMap (#334) * meson: Dependency fixes (#335) * EVINCE BACKPORTS: * backends: backends: Don't ask for bug report in known issues. Fixes #695165 * pdf: Create highlight annotations for existing annotations in document * libdocument: adding class EvAnnotationTextMarkup * libdocument: adding annotation highlight * shell: Show highlight annotations in the sidebar * libdocument: Use a common annotation type for text markup annotations * Add support for reading strike out text markup annotations * Add support for reading underline text markup annotations * Add support for changing the type of a text markup annotation * pdf: Fix memory leak when adding new text annotations * libdocument: Added can-have-popup property to EvAnnotationMarkups. * pdf: Set can-have-popup property to markup annotations when created * ev-view: Create an EvAnnotationWindow for EvAnnotationMarkups allowing this * pdf: Added support to save popup rectangles to pdf backend * pdf: Use poppler_annot_markup_set_popup_rectangle() if available * pdf: Force text annotations to have a fixed size 24x24 * libview: Take border into account when converting view points to doc points * view: preparing for interactive annotations * libdocument: adding annotation squiggly. * pdf: adding annotation squiggly. * shell: adding annotation squiggly. * pdf: Fixed wrong type-check in copy_poppler_annot. * libdocument: Add area property to EvAnnotation * libview: Set the area of the annotations created by the user * pdf: Deprecate the rectangle passed to ev_document_annotations_add_annotation * libdocument: Add EV_ANNOTATIONS_SAVE_AREA flag * pdf: Add support for saving the annotation area * libview: Update the annot area while moved when it's being added * pdf: support for adding and saving highlight annotations * shell, view: adding highlight annotation * pdf: Ensure we always create text markup annots with at least one quadrilateral * Add a toolbar for adding annotations * page-cache: Add flags parameter to ev_page_cache_mark_dirty() * pdf: Mark document as modified when inserting annotations * libview: Do not create annotation window twice. * libview: Ignore right clicks while in annotation add mode. * view: use a hashtable to map annots to their popups. * ev-view: don't show tooltips for empty annotations * Fix add_annotation() to update area based on bounding box * Remove deprecated/unused code and fix warnings * libview: Hide annotation windows on key-press * l10n: Update POT * Meson: Formatting fix in the options file * Thumbnailer: Do not try to create an unsupported epub thumbnail * Thumbnailer: Remove MATE label from context * Add meson scripts for compiling gschemas and updating the icon cache * meson: Fix build configuration - dbus support was partly broken. * Shell: Run thumbnail jobs for epubs not as threads (#353) * meson: fix detection of t1lib * Created test for the Xreader Help menu. * Created test cases for File and Edit menus. * Remove use of deprecated g_type_class_add_private function * ev-window.c: Refactor action visibility. * ev-window.c: Hide the toolbar in recent document mode, there's nothing that can be used on it anyhow. * Created more tests for Xreader menu. * Tests: use build target rather than executable name for dependency * Build: change the conditions for handling tests * tests: Some adjustments and improvements * testEditMenu.py and testFileMenu.py: open file with arg to prevent error * Tests: extend the timeout from 30 seconds to 2 minutes * Updated old tests * meson: simplify version comparison * Updated python version to python3 * ev-window.c: Don't use g_type_class_peek. * Added checks to stop error messages from overtaking the terminal and possibly causing a segfault. * Add Print button to toolbar * Added logic to keep the find bar visible until keyboard shortcut is pressed. * Added back hot keys * Fix Segmentation fault when opening a PDF file #339 * Add UTF8 support for filename in recent view * Zoom by Control+scroll is too sensitive * [Feature request] Please provide "Save" option * Use new annotations icons (#397) * Fix xreader crash on epub search * Copy metadata when a file is copied * Thumbnailer: add application/vnd.comicbook-rar - Add patch fix_ev-window.c_error.patch to fix error: control reaches end of non-void function. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Highlights of development sprint 109
by Ancor Gonzalez Sosa 29 Sep '20

29 Sep '20

The YaST Team continues focusing on improving both AutoYaST and the management of storage devices. Let's take a quick glance at some of the results. - New YaST test client to check AutoYaST dynamic profiles. - Improved detection of which YaST package is needed to process each section of the profile, relying on RPM’s supplement information. - First steps to annotate the documentation of AutoYaST with better information about the corresponding version for each feature. - Final design of the new Partitioner user interface. - Improved automatic submission of translations to Leap and SLE. Check the whole report at https://yast.opensuse.org/blog/2020-09-29/sprint-109 Cheers. -- Ancor González Sosa YaST Team at SUSE Linux GmbH -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

Re: [opensuse-factory] New package safeeyes
by opensuse.lietuviu.kalba 29 Sep '20

29 Sep '20

2020-09-27 18:16, Huy Ngo rašė: > > pkg_resources.DistributionNotFound: The 'pycairo>=1.11.1' distribution > was not found and is required by PyGObject > > I suppose the missing package (pycairo) that caused this was missed > during the build process. Thank you for testing! Seems it was not found at runtime (as it builds and works in my system). Please install python3-cairo package. We will add it as package runtime requirements. -- Regards, Mindaugas -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 5

[opensuse-factory] New Tumbleweed snapshot 20200922 released!
by Dominique Leuenberger 28 Sep '20

28 Sep '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: Mesa (20.1.7 -> 20.1.8) Mesa-drivers (20.1.7 -> 20.1.8) apache2 autoyast2 (4.3.48 -> 4.3.51) cellwriter clamav (0.102.4 -> 0.103.0) dpdk (19.11.3_k5.8.7_1 -> 19.11.4_k5.8.10_1) drbd (9.0.23~1+git.d16bfab7 -> 9.0.25~0+git.bd41626d) firewalld (0.7.5 -> 0.9.0) gimp gthumb (3.10.0 -> 3.10.1) kernel-firmware (20200827 -> 20200916) kernel-source (5.8.7 -> 5.8.10) kmail libpipeline (1.5.0 -> 1.5.3) libyui-qt (2.54.0 -> 2.55.0) mokutil monitoring-plugins (2.2 -> 2.3~alpha.20200520T233014.cadac85e) multipath-tools (0.8.4+183+suse.1817ce2 -> 0.8.4+192+suse.1bc10ad) musepack mutt (1.14.6 -> 1.14.7) nbd noto-coloremoji-fonts (20200722 -> 20200916) okular opencc (1.0.5 -> 1.1.1) os-prober (1.76 -> 1.77) perl-BerkeleyDB (0.63 -> 0.64) pinfo (0.6.10 -> 0.6.13) python-alembic (1.4.2 -> 1.4.3) spectacle virtualbox virtualbox-kmp (6.1.14_k5.8.7_1 -> 6.1.14_k5.8.10_1) xf86-video-vesa (2.4.0 -> 2.5.0) xterm (353 -> 359) === Details === ==== Mesa ==== Version update (20.1.7 -> 20.1.8) Subpackages: Mesa-dri-devel Mesa-libEGL1 Mesa-libGL1 Mesa-libglapi0 libgbm1 - buildfix-ppc64le.patch * buildfix for ppc64le (boo#1176562) - update to 20.1.8: * mainly bugfixes, highlights: - Crash in ruvd_end_frame when calling vaBeginPicture/vaEndPicture without rendering anything - khr_debug-push-pop-group_gl: ../src/util/simple_mtx.h:86: simple_mtx_lock: Assertion `c != _SIMPLE_MTX_INVALID_VALUE' failed. - Amber test opt_peel_loop_initial_if: Assertion failed - Dirt Rally: Flickering glitches on certain foliage since Mesa 20.1.0 caused by MSAA - [BRW] WRC 5 asserts with gallium nine and iris. ==== Mesa-drivers ==== Version update (20.1.7 -> 20.1.8) Subpackages: Mesa-dri Mesa-dri-nouveau Mesa-gallium Mesa-libva libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_intel libvulkan_radeon libxatracker2 - buildfix-ppc64le.patch * buildfix for ppc64le (boo#1176562) - update to 20.1.8: * mainly bugfixes, highlights: - Crash in ruvd_end_frame when calling vaBeginPicture/vaEndPicture without rendering anything - khr_debug-push-pop-group_gl: ../src/util/simple_mtx.h:86: simple_mtx_lock: Assertion `c != _SIMPLE_MTX_INVALID_VALUE' failed. - Amber test opt_peel_loop_initial_if: Assertion failed - Dirt Rally: Flickering glitches on certain foliage since Mesa 20.1.0 caused by MSAA - [BRW] WRC 5 asserts with gallium nine and iris. ==== apache2 ==== Subpackages: apache2-doc apache2-example-pages apache2-prefork apache2-utils - Make use of %service_del_postun_without_restart And stop using DISABLE_RESTART_ON_UPDATE as this interface is obsolete. ==== autoyast2 ==== Version update (4.3.48 -> 4.3.51) Subpackages: autoyast2-installation - Removing package evaluation via AY schema. Using autoyast(...) supplements instead (bsc#1146494). - 4.3.51 - Import general and report sections in case that some pre-script modified the profile (bsc#1175725) - 4.3.50 - Fix 'bcache_options' element using the right type (bsc#1176595) - 4.3.49 ==== cellwriter ==== - Add patch to fix build with GCC10: * 0001-Fix-build-failure-with-GCC10.patch ==== clamav ==== Version update (0.102.4 -> 0.103.0) Subpackages: libclamav9 libfreshclam2 - Update to 0.103.0 * clamd can now reload the signature database without blocking scanning. This multi-threaded database reload improvement was made possible thanks to a community effort. - Non-blocking database reloads are now the default behavior. Some systems that are more constrained on RAM may need to disable non-blocking reloads as it will temporarily consume two times as much memory. We added a new clamd config option ConcurrentDatabaseReload, which may be set to no. * Dropped clamav-str-h.patch (no longer needed) * Fix clamav-milter.service (requires clamd.service to run) ==== dpdk ==== Version update (19.11.3_k5.8.7_1 -> 19.11.4_k5.8.10_1) - Update to 19.11.4. For a list of fixes check: https://doc.dpdk.org/guides-19.11/rel_notes/release_19_11.html#id8 - Add patch to resolve build error reported in Staging:E project where a kernel backport (jsc#SLE-13536) introduced backward incompatible changes to the API that break kni module build * 0001-SLE15-SP3-compatibility-patch-for-kni.patch ==== drbd ==== Version update (9.0.23~1+git.d16bfab7 -> 9.0.25~0+git.bd41626d) - bsc#1175257, update to 9.0.25-0rc1 * fix a race condition between receiving UUIDs and finishing a resync that can lead to a false-positive split-brain detection later on * fix access after free of peer_req objects, that only happened when a resync target node is paused sync source at the same time * fix abortion of local state changes in case they can not proceed due to loss of connection * fix corner cases with reconciliation resync and parallel promote * fix an issue establishing a connection when the multipath feature is used to connect to a stacked resource without a dedicated service IP * fix sometimes a peer-disk state to another resync-target staying Outdated after two resyncs from the same sync source node finish * fix an (unlikely) deadlock while establishing a connection * deactivate the kref_debug code, it has performance implicatios * Introduce the "disconnected" hander; it receives the last connection state in the evnironment variable DRBD_CSTATE - Changes of drbd-9.0.24-1 * fix deadlock when connecting drbd-9 to drbd-8.4 and the drbd-9 side becomes sync-source * fix an issue with 3 (or more) node configurations; with a diskless node and two storage nodes; if one of the storage nodes was hard rebooted and came back and the diskless got primary and did not issue write requests and the returning storage node established a connection with the surviving storage node first, DRBD failed to upgrade the disk state to UpToDate after the resync * detect split-brain situations also when both nodes are primary; this is how it was in drbd-8.4; up to now drbd-9 did not realize the split-brain since it complains about the not allowed dual primary first; for this change a new protocol version was necessary * verified it compiles with Linux 5.7 - Add compatible patches to kernel v5.8.0 Add patch compat_remove_include_vermagic.patch Add patch compat_remove_kernel_setsockopt.patch Add patch compat_remove_pgprot_88dca4c.patch ==== firewalld ==== Version update (0.7.5 -> 0.9.0) Subpackages: firewalld-lang python3-firewall - Add python3-nftables as a requirement. - update to 0.9.0: * New major features * prevention of Zone Drifting * Intra Zone Forwarding * Policy Objects * For a full list of changes, see https://github.com/firewalld/firewalld/compare/v0.8.0...v0.9.0 - update to 0.8.3: * nftables: convert to libnftables JSON interface * service: new ?helper? element to replace ?module? More accurately represents the conntrack helper. Deprecates ?module?. * allow custom helpers using standard helper modules (rhbz 1733066) * testsuite is now shipped in the dist tarball * Typo in firewall-config(1) * Fix typo in TFTP service description * doc: README: add note about language translations * fix: rich: source/dest only matching with mark action * feat: AllowZoneDrifting config option * feat: nftables: support AllowZoneDrifting=yes * feat: ipXtables: support AllowZoneDrifting=yes * fix: firewall-offline-cmd: Don?t print warning about AllowZoneDrifting * fix: add logrotate policy * doc: direct: add CAVEATS section * fix: checkIP6: strip leading/trailing square brackets * fix: nftables: remove square brackets from IPv6 addresses * fix: ipXtables: remove square brackets from IPv6 addresses * fix: nftables: ipset types using ?port? * fix: nftables: zone dispatch with multidimensional ipsets * fix: ipset: destroy runtime sets on reload/stop * fix: port: support querying sub ranges * fix: source_port: support querying sub ranges * doc: specify accepted characters for object names * fix: doc: address copy/paste mistakes in short/description * fix: configure: atlocal: quote variable values * fix: nftables: allow set intervals with concatenations * doc: clarify ?set-target values ?default? vs ?reject? * fix: update dynamic DCE RPC ports in freeipa-trust service * fix: nftables: ipset: port ranges for non-default protocols * fix(systemd): Conflict with nftables.service * fix(direct): rule in a zone chain * fix(client): addService needs to reduce tuple size * fix(doc): dbus: signatures for zone tuple based APIs * fix(config): bool values in dict based import/export * fix(dbus): service: don?t cleanup config for old set APIs * fix(ipset): flush the set if IndividiualCalls=yes * fix(firewall-offline-cmd): remove instances of ?[P]? in help text * fix(rich): source mac with nftables backend * docs: replace occurrences of the term blacklist with denylist * fix: core: rich: Catch ValueError on non-numeric priority values * docs(README): add libxslt for doc generation * fix(cli): add ?zone is an invalid option with ?direct * fix(cli): add ipset type hash:mac is incompatible with the family parameter ==== gimp ==== Subpackages: gimp-lang gimp-plugin-aa libgimp-2_0-0 libgimpui-2_0-0 - Make python 2 conditional, and disable on SLE/Leap (bsc#1082699). ==== gthumb ==== Version update (3.10.0 -> 3.10.1) Subpackages: gthumb-lang - Update to version 3.10.1: + User visible changes: - Exit fullscreen when pressing Esc in fullscreen mode. - Search editor: focus the newly added filter selector. - File list: reset vertical scroll position after changing directory. - Preferences dialog: increase width for extensions and shortcuts lists. + Bugs fixed: - WebP loader: fixed an infinite loop when the operation is cancelled. - Jpeg loader: fixed crash in case of some malformed jpegs. - Fixed crash when selecting other images after deleting. - Fixed long UI freeze after cutting/pasting many files. + Updated translations. ==== kernel-firmware ==== Version update (20200827 -> 20200916) Subpackages: kernel-firmware-all kernel-firmware-amdgpu kernel-firmware-ath10k kernel-firmware-atheros kernel-firmware-bluetooth kernel-firmware-bnx2 kernel-firmware-brcm kernel-firmware-chelsio kernel-firmware-dpaa2 kernel-firmware-i915 kernel-firmware-intel kernel-firmware-iwlwifi kernel-firmware-liquidio kernel-firmware-marvell kernel-firmware-media kernel-firmware-mediatek kernel-firmware-mellanox kernel-firmware-mwifiex kernel-firmware-network kernel-firmware-nfp kernel-firmware-nvidia kernel-firmware-platform kernel-firmware-prestera kernel-firmware-qlogic kernel-firmware-radeon kernel-firmware-realtek kernel-firmware-serial kernel-firmware-sound kernel-firmware-ti kernel-firmware-ueagle kernel-firmware-usb-network ucode-amd - Update to version 20200916 (git commit 00a84c516078): * linux-firmware: Update AMD SEV firmware * linux-firmware: Update firmware file for Intel Bluetooth AX200 * linux-firmware: Update firmware file for Intel Bluetooth AX201 * linux-firmware: Update firmware file for Intel Bluetooth 9560 * linux-firmware: Update firmware file for Intel Bluetooth 9260 * Mellanox: Add new mlxsw_spectrum firmware xx.2008.1310 * mediatek: update MT7915 firmware to 20200819 * brcm: Fix a stale symlink for RPi3 model b+ * qcom: Add updated a5xx and a6xx microcode * wl18xx: update firmware file 8.9.0.0.83 ==== kernel-source ==== Version update (5.8.7 -> 5.8.10) Subpackages: kernel-default kernel-docs - Update patches.kernel.org/5.8.10-047-block-restore-a-specific-error-code-in-bdev_d… (bsc#1012628 bsc#1176770). Add a reference. - commit af3e800 - RDMA/bnxt_re: Remove set but not used variable 'qplib_ctx' (git-fixes). - commit 33939e8 - Linux 5.8.10 (bsc#1012628). - gcov: add support for GCC 10.1 (bsc#1012628). - drm/msm/gpu: make ringbuffer readonly (bsc#1012628). - usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes (bsc#1012628). - usb: typec: intel_pmc_mux: Do not configure Altmode HPD High (bsc#1012628). - usb: typec: intel_pmc_mux: Un-register the USB role switch (bsc#1012628). - usb: typec: ucsi: acpi: Check the _DEP dependencies (bsc#1012628). - usb: Fix out of sync data toggle if a configured device is reconfigured (bsc#1012628). - USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules (bsc#1012628). - USB: serial: option: support dynamic Quectel USB compositions (bsc#1012628). - USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter (bsc#1012628). - usb: core: fix slab-out-of-bounds Read in read_descriptors (bsc#1012628). - phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init (bsc#1012628). - staging: greybus: audio: fix uninitialized value issue (bsc#1012628). - video: fbdev: fix OOB read in vga_8planes_imageblit() (bsc#1012628). - ARM: dts: vfxxx: Add syscon compatible with OCOTP (bsc#1012628). - arm64: dts: imx8mp: correct sdma1 clk setting (bsc#1012628). - test_firmware: Test platform fw loading on non-EFI systems (bsc#1012628). - debugfs: Fix module state check condition (bsc#1012628). - Revert "usb: dwc3: meson-g12a: fix shared reset control use" (bsc#1012628). - KVM: fix memory leak in kvm_io_bus_unregister_dev() (bsc#1012628). - kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed (bsc#1012628). - KVM: arm64: Do not try to map PUDs when they are folded into PMD (bsc#1012628). - KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit (bsc#1012628). - vgacon: remove software scrollback support (bsc#1012628). - fbcon: remove now unusued 'softback_lines' cursor() argument (bsc#1012628). - fbcon: remove soft scrollback code (bsc#1012628). - RDMA/mlx4: Read pkey table length instead of hardcoded value (bsc#1012628). - RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars (bsc#1012628). - rbd: require global CAP_SYS_ADMIN for mapping and unmapping (bsc#1012628). - nvme: Revert: Fix controller creation races with teardown flow (bsc#1012628). - mmc: sdhci-of-esdhc: Don't walk device-tree on every interrupt (bsc#1012628). - mmc: sdio: Use mmc_pre_req() / mmc_post_req() (bsc#1012628). - drm/msm: Disable the RPTR shadow (bsc#1012628). - drm/msm: Disable preemption on all 5xx targets (bsc#1012628). - drm/msm: Split the a5xx preemption record (bsc#1012628). - drm/tve200: Stabilize enable/disable (bsc#1012628). - scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem (bsc#1012628). - scsi: lpfc: Fix setting IRQ affinity with an empty CPU mask (bsc#1012628). - scsi: target: iscsi: Fix data digest calculation (bsc#1012628). - misc: eeprom: at24: register nvmem only after eeprom is ready to use (bsc#1012628). - regulator: core: Fix slab-out-of-bounds in regulator_unlock_recursive() (bsc#1012628). - regulator: plug of_node leak in regulator_register()'s error path (bsc#1012628). - regulator: push allocation in set_consumer_device_supply() out of lock (bsc#1012628). - regulator: push allocations in create_regulator() outside of lock (bsc#1012628). - regulator: push allocation in regulator_init_coupling() outside of lock (bsc#1012628). - kobject: Restore old behaviour of kobject_del(NULL) (bsc#1012628). - thunderbolt: Disable ports that are not implemented (bsc#1012628). - btrfs: fix wrong address when faulting in pages in the search ioctl (bsc#1012628). - btrfs: free data reloc tree on failed mount (bsc#1012628). - btrfs: fix lockdep splat in add_missing_dev (bsc#1012628). - btrfs: require only sector size alignment for parent eb bytenr (bsc#1012628). - staging: wlan-ng: fix out of bounds read in prism2sta_probe_usb() (bsc#1012628). - iio:accel:mma8452: Fix timestamp alignment and prevent data leak (bsc#1012628). - iio:accel:mma7455: Fix timestamp alignment and prevent data leak (bsc#1012628). - iio: accel: kxsd9: Fix alignment of local buffer (bsc#1012628). - iio:chemical:ccs811: Fix timestamp alignment and prevent data leak (bsc#1012628). - iio:light:max44000 Fix timestamp alignment and prevent data leak (bsc#1012628). - iio:magnetometer:ak8975 Fix alignment and data leak issues (bsc#1012628). - iio:adc:ti-adc081c Fix alignment and data leak issues (bsc#1012628). - iio:adc:max1118 Fix alignment of timestamp and data leak issues (bsc#1012628). - iio:adc:ina2xx Fix timestamp alignment issue (bsc#1012628). - iio:adc:ti-adc084s021 Fix alignment and data leak issues (bsc#1012628). - iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak (bsc#1012628). - iio:proximity:mb1232: Fix timestamp alignment and prevent data leak (bsc#1012628). - iio:light:ltr501 Fix timestamp alignment issue (bsc#1012628). - iio: cros_ec: Set Gyroscope default frequency to 25Hz (bsc#1012628). - iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set (bsc#1012628). - iio: adc: mcp3422: fix locking on error path (bsc#1012628). - iio: adc: mcp3422: fix locking scope (bsc#1012628). - gcov: Disable gcov build with GCC 10 (bsc#1012628). - iommu/amd: Do not use IOMMUv2 functionality when SME is active (bsc#1012628). - iommu/amd: Do not force direct mapping when SME is active (bsc#1012628). - drm/amdgpu: Fix bug in reporting voltage for CIK (bsc#1012628). - drivers/net/wan/hdlc: Change the default of hard_header_len to 0 (bsc#1012628). - ALSA: hda: use consistent HDAudio spelling in comments/docs (bsc#1012628). - ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled (bsc#1012628). - ALSA: hda: hdmi - add Rocketlake support (bsc#1012628). - arm64/module: set trampoline section flags regardless of CONFIG_DYNAMIC_FTRACE (bsc#1012628). - cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled (bsc#1012628). - cpufreq: intel_pstate: Refuse to turn off with HWP enabled (bsc#1012628). - ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id (bsc#1012628). - HID: elan: Fix memleak in elan_input_configured (bsc#1012628). - drivers/net/wan/hdlc_cisco: Add hard_header_len (bsc#1012628). - HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller (bsc#1012628). - HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices (bsc#1012628). - nvme-pci: cancel nvme device request before disabling (bsc#1012628). - nvme-rdma: fix reset hang if controller died in the middle of a reset (bsc#1012628). - nvme-rdma: fix timeout handler (bsc#1012628). - nvme-rdma: serialize controller teardown sequences (bsc#1012628). - nvme-tcp: fix reset hang if controller died in the middle of a reset (bsc#1012628). - nvme-tcp: fix timeout handler (bsc#1012628). - nvme-tcp: serialize controller teardown sequences (bsc#1012628). - nvme: have nvme_wait_freeze_timeout return if it timed out (bsc#1012628). - nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance (bsc#1012628). - nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu (bsc#1012628). - media: gpio-ir-tx: spinlock is not needed to disable interrupts (bsc#1012628). - irqchip/eznps: Fix build error for !ARC700 builds (bsc#1012628). - ARC: show_regs: fix r12 printing and simplify (bsc#1012628). - xfs: initialize the shortform attr header padding entry (bsc#1012628). - cfg80211: Adjust 6 GHz frequency to channel conversion (bsc#1012628). - mac80211: reduce packet loss event false positives (bsc#1012628). - wireless: fix wrong 160/80+80 MHz setting (bsc#1012628). - drivers/net/wan/lapbether: Set network_header before transmitting (bsc#1012628). - xfs: fix off-by-one in inode alloc block reservation calculation (bsc#1012628). - net: hns3: Fix for geneve tx checksum bug (bsc#1012628). - drivers/dma/dma-jz4780: Fix race condition between probe and irq handler (bsc#1012628). - ALSA: hda/tegra: Program WAKEEN register for Tegra (bsc#1012628). - ALSA: hda: Fix 2 channel swapping for Tegra (bsc#1012628). - scsi: qedf: Fix null ptr reference in qedf_stag_change_work (bsc#1012628). - firestream: Fix memleak in fs_open (bsc#1012628). - NFC: st95hf: Fix memleak in st95hf_in_send_cmd (bsc#1012628). - drivers/net/wan/lapbether: Added needed_tailroom (bsc#1012628). - netfilter: nft_set_rbtree: Detect partial overlap with start endpoint match (bsc#1012628). - netfilter: conntrack: allow sctp hearbeat after connection re-use (bsc#1012628). - MIPS: Loongson64: Do not override watch and ejtag feature (bsc#1012628). - dmaengine: acpi: Put the CSRT table after using it (bsc#1012628). - ARC: HSDK: wireup perf irq (bsc#1012628). - KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN (bsc#1012628). - KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control (bsc#1012628). - arm64: dts: ns2: Fixed QSPI compatible string (bsc#1012628). - ARM: dts: BCM5301X: Fixed QSPI compatible string (bsc#1012628). - ARM: dts: NSP: Fixed QSPI compatible string (bsc#1012628). - ARM: dts: bcm: HR2: Fixed QSPI compatible string (bsc#1012628). - IB/isert: Fix unaligned immediate-data handling (bsc#1012628). - RDMA/rtrs-srv: Set .release function for rtrs srv device during device init (bsc#1012628). - block: Set same_page to false in __bio_try_merge_page if ret is false (bsc#1012628). - spi: stm32: fix pm_runtime_get_sync() error checking (bsc#1012628). - nvme-fabrics: allow to queue requests for live queues (bsc#1012628). - seccomp: don't leak memory when filter install races (bsc#1012628). - block: restore a specific error code in bdev_del_partition (bsc#1012628). - i2c: npcm7xx: Fix timeout calculation (bsc#1012628). - btrfs: fix NULL pointer dereference after failure to create snapshot (bsc#1012628). - spi: stm32: Rate-limit the 'Communication suspended' message (bsc#1012628). - mmc: sdhci-msm: Add retries when all tuning phases are found valid (bsc#1012628). - mmc: sdhci-acpi: Clear amd_sdhci_host on reset (bsc#1012628). - ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3 (bsc#1012628). - KVM: arm64: Update page shift if stage 2 block mapping not supported (bsc#1012628). - drm/sun4i: backend: Disable alpha on the lowest plane on the A20 (bsc#1012628). - drm/sun4i: backend: Support alpha property on lowest plane (bsc#1012628). - drm/sun4i: Fix DE2 YVU handling (bsc#1012628). - padata: fix possible padata_works_lock deadlock (bsc#1012628). - interconnect: qcom: Fix small BW votes being truncated to zero (bsc#1012628). - Revert "kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled" (bsc#1012628). - soundwire: fix double free of dangling pointer (bsc#1012628). - scsi: mpt3sas: Don't call disable_irq from IRQ poll handler (bsc#1012628). - scsi: megaraid_sas: Don't call disable_irq from process IRQ poll (bsc#1012628). - RDMA/core: Fix reported speed and width (bsc#1012628). - RDMA/core: Fix unsafe linked list traversal after failing to allocate CQ (bsc#1012628). - drm/virtio: fix unblank (bsc#1012628). - scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA (bsc#1012628). - scsi: qla2xxx: Fix regression on sparc64 (bsc#1012628). - drm/sun4i: Fix dsi dcs long write function (bsc#1012628). - arm64: dts: imx8mq: Fix TMU interrupt property (bsc#1012628). - drm/sun4i: add missing put_device() call in sun8i_r40_tcon_tv_set_mux() (bsc#1012628). - RDMA/bnxt_re: Remove the qp from list only if the qp destroy succeeds (bsc#1012628). - RDMA/bnxt_re: Fix driver crash on unaligned PSN entry address (bsc#1012628). - RDMA/bnxt_re: Static NQ depth allocation (bsc#1012628). - RDMA/bnxt_re: Fix the qp table indexing (bsc#1012628). - RDMA/bnxt_re: Do not report transparent vlan from QP1 (bsc#1012628). - RDMA/rxe: Fix panic when calling kmem_cache_create() (bsc#1012628). - RDMA/rxe: Drop pointless checks in rxe_init_ports (bsc#1012628). - RDMA/rxe: Fix memleak in rxe_mem_init_user (bsc#1012628). - RDMA/rtrs-srv: Replace device_register with device_initialize and device_add (bsc#1012628). - ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy (bsc#1012628). - arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build (bsc#1012628). - ARM: dts: imx7ulp: Correct gpio ranges (bsc#1012628). - ARM: dts: ls1021a: fix QuadSPI-memory reg range (bsc#1012628). - selftests/timers: Turn off timeout setting (bsc#1012628). - ARM: dts: omap5: Fix DSI base address and clocks (bsc#1012628). - ARM: dts: socfpga: fix register entry for timer3 on Arria10 (bsc#1012628). - regulator: remove superfluous lock in regulator_resolve_coupling() (bsc#1012628). - regulator: push allocation in regulator_ena_gpio_request() out of lock (bsc#1012628). - ARM: dts: logicpd-som-lv-baseboard: Fix missing video (bsc#1012628). - ARM: dts: logicpd-som-lv-baseboard: Fix broken audio (bsc#1012628). - ARM: dts: logicpd-torpedo-baseboard: Fix broken audio (bsc#1012628). - ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm() (bsc#1012628). - commit 83e873a - Linux 5.8.9 (bsc#1012628). - mptcp: free acked data before waiting for more memory (bsc#1012628). - net: disable netpoll on fresh napis (bsc#1012628). - tipc: fix using smp_processor_id() in preemptible (bsc#1012628). - tipc: fix shutdown() of connectionless socket (bsc#1012628). - taprio: Fix using wrong queues in gate mask (bsc#1012628). - sctp: not disable bh in the whole sctp_get_port_local() (bsc#1012628). - net: usb: dm9601: Add USB ID of Keenetic Plus DSL (bsc#1012628). - netlabel: fix problems with mapping removal (bsc#1012628). - ipv6: Fix sysctl max for fib_multipath_hash_policy (bsc#1012628). - ipv4: Silence suspicious RCU usage warning (bsc#1012628). - RDMA/cma: Execute rdma_cm destruction from a handler properly (bsc#1012628). - RDMA/cma: Remove unneeded locking for req paths (bsc#1012628). - RDMA/cma: Using the standard locking pattern when delivering the removal event (bsc#1012628). - RDMA/cma: Simplify DEVICE_REMOVAL for internal_id (bsc#1012628). - io_uring: fix linked deferred ->files cancellation (bsc#1012628). - io_uring: fix cancel of deferred reqs with ->files (bsc#1012628). - commit 52f63c2 - Linux 5.8.8 (bsc#1012628). - hwmon: (pmbus/isl68137) remove READ_TEMPERATURE_1 telemetry for RAA228228 (bsc#1012628). - HID: quirks: Always poll three more Lenovo PixArt mice (bsc#1012628). - drm/msm/dpu: Fix reservation failures in modeset (bsc#1012628). - drm/msm/dpu: Fix scale params in plane validation (bsc#1012628). - drm/msm/dpu: fix unitialized variable error (bsc#1012628). - tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup (bsc#1012628). - drm/msm: add shutdown support for display platform_driver (bsc#1012628). - hwmon: (applesmc) check status earlier (bsc#1012628). - nvmet: Disable keep-alive timer when kato is cleared to 0h (bsc#1012628). - drm/msm: enable vblank during atomic commits (bsc#1012628). - habanalabs: unmap PCI bars upon iATU failure (bsc#1012628). - habanalabs: validate packet id during CB parse (bsc#1012628). - habanalabs: set clock gating according to mask (bsc#1012628). - habanalabs: proper handling of alloc size in coresight (bsc#1012628). - habanalabs: set max power according to card type (bsc#1012628). - habanalabs: validate FW file size (bsc#1012628). - habanalabs: check correct vmalloc return code (bsc#1012628). - drm/msm/a6xx: fix gmu start on newer firmware (bsc#1012628). - gfs2: add some much needed cleanup for log flushes that fail (bsc#1012628). - hv_utils: return error if host timesysnc update is stale (bsc#1012628). - hv_utils: drain the timesync packets on onchannelcallback (bsc#1012628). - ceph: don't allow setlease on cephfs (bsc#1012628). - i2c: iproc: Fix shifting 31 bits (bsc#1012628). - drm/omap: fix incorrect lock state (bsc#1012628). - irqchip/ingenic: Leave parent IRQ unmasked on suspend (bsc#1012628). - cpuidle: Fixup IRQ state (bsc#1012628). - nbd: restore default timeout when setting it to zero (bsc#1012628). - s390: don't trace preemption in percpu macros (bsc#1012628). - drm/amd/display: should check error using DC_OK (bsc#1012628). - drm/amd/display: Reject overlay plane configurations in multi-display scenarios (bsc#1012628). - drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps (bsc#1012628). - drm/amd/display: Revert HDCP disable sequence change (bsc#1012628). - drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation (bsc#1012628). - drm/amd/display: Keep current gain when ABM disable immediately (bsc#1012628). - drm/amd/display: Retry AUX write when fail occurs (bsc#1012628). - drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init (bsc#1012628). - xen/xenbus: Fix granting of vmalloc'd memory (bsc#1012628). - fsldma: fix very broken 32-bit ppc ioread64 functionality (bsc#1012628). - dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling (bsc#1012628). - batman-adv: Avoid uninitialized chaddr when handling DHCP (bsc#1012628). - batman-adv: Fix own OGM check in aggregated OGMs (bsc#1012628). - batman-adv: bla: use netif_rx_ni when not in interrupt context (bsc#1012628). - dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate() (bsc#1012628). - dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate() (bsc#1012628). - dmaengine: at_hdmac: add missing kfree() call in at_dma_xlate() (bsc#1012628). - rxrpc: Keep the ACK serial in a var in rxrpc_input_ack() (bsc#1012628). - rxrpc: Fix loss of RTT samples due to interposed ACK (bsc#1012628). - rxrpc: Make rxrpc_kernel_get_srtt() indicate validity (bsc#1012628). - MIPS: mm: BMIPS5000 has inclusive physical caches (bsc#1012628). - MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores (bsc#1012628). - mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040 (bsc#1012628). - perf sched timehist: Fix use of CPU list with summary option (bsc#1012628). - perf top: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set (bsc#1012628). - netfilter: nf_tables: add NFTA_SET_USERDATA if not null (bsc#1012628). - netfilter: nf_tables: incorrect enum nft_list_attributes definition (bsc#1012628). - netfilter: nf_tables: fix destination register zeroing (bsc#1012628). - net: hns: Fix memleak in hns_nic_dev_probe (bsc#1012628). - net: systemport: Fix memleak in bcm_sysport_probe (bsc#1012628). - ravb: Fixed to be able to unload modules (bsc#1012628). - net: arc_emac: Fix memleak in arc_mdio_probe (bsc#1012628). - bpf: Fix a buffer out-of-bound access when filling raw_tp link_info (bsc#1012628). - dmaengine: pl330: Fix burst length if burst size is smaller than bus width (bsc#1012628). - dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sg (bsc#1012628). - gtp: add GTPA_LINK info to msg sent to userspace (bsc#1012628). - net: ethernet: ti: cpsw: fix clean up of vlan mc entries for host port (bsc#1012628). - net: ethernet: ti: cpsw_new: fix clean up of vlan mc entries for host port (bsc#1012628). - bnxt_en: Don't query FW when netif_running() is false (bsc#1012628). - bnxt_en: Check for zero dir entries in NVRAM (bsc#1012628). - bnxt_en: Fix ethtool -S statitics with XDP or TCs enabled (bsc#1012628). - bnxt_en: Fix PCI AER error recovery flow (bsc#1012628). - bnxt_en: Fix possible crash in bnxt_fw_reset_task() (bsc#1012628). - bnxt_en: fix HWRM error when querying VF temperature (bsc#1012628). - xfs: finish dfops on every insert range shift iteration (bsc#1012628). - xfs: fix boundary test in xfs_attr_shortform_verify (bsc#1012628). - bnxt: don't enable NAPI until rings are ready (bsc#1012628). - media: vicodec: add missing v4l2_ctrl_request_hdl_put() (bsc#1012628). - media: cedrus: Add missing v4l2_ctrl_request_hdl_put() (bsc#1012628). - net: ethernet: ti: cpsw_new: fix error handling in cpsw_ndo_vlan_rx_kill_vid() (bsc#1012628). - media: i2c: imx214: select V4L2_FWNODE (bsc#1012628). - selftests/bpf: Fix massive output from test_maps (bsc#1012628). - net: dsa: mt7530: fix advertising unsupported 1000baseT_Half (bsc#1012628). - netfilter: nfnetlink: nfnetlink_unicast() reports EAGAIN instead of ENOBUFS (bsc#1012628). - nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()' (bsc#1012628). - nvme: fix controller instance leak (bsc#1012628). - netfilter: conntrack: do not auto-delete clash entries on reply (bsc#1012628). - opp: Don't drop reference for an OPP table that was never parsed (bsc#1012628). - cxgb4: fix thermal zone device registration (bsc#1012628). - net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode (bsc#1012628). - MIPS: perf: Fix wrong check condition of Loongson event IDs (bsc#1012628). - block: fix locking in bdev_del_partition (bsc#1012628). - perf top/report: Fix infinite loop in the TUI for grouped events (bsc#1012628). - perf cs-etm: Fix corrupt data after perf inject from (bsc#1012628). - perf intel-pt: Fix corrupt data after perf inject from (bsc#1012628). - perf tools: Correct SNOOPX field offset (bsc#1012628). - net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() (bsc#1012628). - fix regression in "epoll: Keep a reference on files added to the check list" (bsc#1012628). - net: bcmgenet: fix mask check in bcmgenet_validate_flow() (bsc#1012628). - net: gemini: Fix another missing clk_disable_unprepare() in probe (bsc#1012628). - nfp: flower: fix ABI mismatch between driver and firmware (bsc#1012628). - net: dp83867: Fix WoL SecureOn password (bsc#1012628). - MIPS: add missing MSACSR and upper MSA initialization (bsc#1012628). - MIPS: SNI: Fix SCSI interrupt (bsc#1012628). - xfs: fix xfs_bmap_validate_extent_raw when checking attr fork of rt files (bsc#1012628). - perf jevents: Fix suspicious code in fixregex() (bsc#1012628). - perf stat: Turn off summary for interval mode by default (bsc#1012628). - perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new()) (bsc#1012628). - tg3: Fix soft lockup when tg3_reset_task() fails (bsc#1012628). - x86, fakenuma: Fix invalid starting node ID (bsc#1012628). - iommu/vt-d: Serialize IOMMU GCMD register modifications (bsc#1012628). - thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430 (bsc#1012628). - thermal: qcom-spmi-temp-alarm: Don't suppress negative temp (bsc#1012628). - iommu/amd: Restore IRTE.RemapEn bit after programming IRTE (bsc#1012628). - iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE (bsc#1012628). - include/linux/log2.h: add missing () around n in roundup_pow_of_two() (bsc#1012628). - iommu/vt-d: Handle 36bit addressing for x86-32 (bsc#1012628). - tracing/kprobes, x86/ptrace: Fix regs argument order for i386 (bsc#1012628). - x86/entry: Fix AC assertion (bsc#1012628). - x86/debug: Allow a single level of #DB recursion (bsc#1012628). - ext2: don't update mtime on COW faults (bsc#1012628). - xfs: don't update mtime on COW faults (bsc#1012628). - ARC: perf: don't bail setup if pct irq missing in device-tree (bsc#1012628). - arc: fix memory initialization for systems with two memory banks (bsc#1012628). - btrfs: drop path before adding new uuid tree entry (bsc#1012628). - btrfs: fix potential deadlock in the search ioctl (bsc#1012628). - btrfs: allocate scrub workqueues outside of locks (bsc#1012628). - btrfs: set the correct lockdep class for new nodes (bsc#1012628). - btrfs: set the lockdep class for log tree extent buffers (bsc#1012628). - btrfs: block-group: fix free-space bitmap threshold (bsc#1012628). - btrfs: tree-checker: fix the error message for transid error (bsc#1012628). - Bluetooth: Return NOTIFY_DONE for hci_suspend_notifier (bsc#1012628). - x86/mm/32: Bring back vmalloc faulting on x86_32 (bsc#1012628). - ALSA: ca0106: fix error code handling (bsc#1012628). - ALSA: usb-audio: Add basic capture support for Pioneer DJ DJM-250MK2 (bsc#1012628). - ALSA: usb-audio: Add implicit feedback quirk for UR22C (bsc#1012628). - ALSA: pcm: oss: Remove superfluous WARN_ON() for mulaw sanity check (bsc#1012628). - ALSA: hda/hdmi: always check pin power status in i915 pin fixup (bsc#1012628). - ALSA: firewire-digi00x: exclude Avid Adrenaline from detection (bsc#1012628). - ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO (bsc#1012628). - ALSA; firewire-tascam: exclude Tascam FE-8 from detection (bsc#1012628). - ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion NT950XCJ-X716A (bsc#1012628). - ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th Gen (bsc#1012628). - arm64: dts: mt7622: add reset node for mmc device (bsc#1012628). - mmc: mediatek: add optional module reset property (bsc#1012628). - mmc: dt-bindings: Add resets/reset-names for Mediatek MMC bindings (bsc#1012628). - mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers (bsc#1012628). - media: rc: do not access device via sysfs after rc_unregister_device() (bsc#1012628). - media: rc: uevent sysfs file races with rc_unregister_device() (bsc#1012628). - affs: fix basic permission bits to actually work (bsc#1012628). - block: allow for_each_bvec to support zero len bvec (bsc#1012628). - block: ensure bdi->io_pages is always initialized (bsc#1012628). - io_uring: set table->files[i] to NULL when io_sqe_file_register failed (bsc#1012628). - io_uring: fix removing the wrong file in __io_sqe_files_update() (bsc#1012628). - s390: fix GENERIC_LOCKBREAK dependency typo in Kconfig (bsc#1012628). - libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks (bsc#1012628). - mips/oprofile: Fix fallthrough placement (bsc#1012628). - blk-iocost: ioc_pd_free() shouldn't assume irq disabled (bsc#1012628). - blk-stat: make q->stats->lock irqsafe (bsc#1012628). - dmaengine: dw-edma: Fix scatter-gather address calculation (bsc#1012628). - drm/i915: Fix sha_text population code (bsc#1012628). - drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting (bsc#1012628). - drm/amdgpu: Specify get_argument function for ci_smu_funcs (bsc#1012628). - dm writecache: handle DAX to partitions on persistent memory correctly (bsc#1012628). - dm mpath: fix racey management of PG initialization (bsc#1012628). - dm integrity: fix error reporting in bitmap mode after creation (bsc#1012628). - dm crypt: Initialize crypto wait structures (bsc#1012628). - dm cache metadata: Avoid returning cmd->bm wild pointer on error (bsc#1012628). - dm thin metadata: Avoid returning cmd->bm wild pointer on error (bsc#1012628). - dm thin metadata: Fix use-after-free in dm_bm_set_read_only (bsc#1012628). - mm: slub: fix conversion of freelist_corrupted() (bsc#1012628). - mm: track page table modifications in __apply_to_page_range() (bsc#1012628). - mm: madvise: fix vma user-after-free (bsc#1012628). - mm/rmap: fixup copying of soft dirty and uffd ptes (bsc#1012628). - io_uring: no read/write-retry on -EAGAIN error and O_NONBLOCK marked file (bsc#1012628). - perf record: Correct the help info of option "--no-bpf-event" (bsc#1012628). - kconfig: streamline_config.pl: check defined(ENV variable) before using it (bsc#1012628). - sdhci: tegra: Add missing TMCLK for data timeout (bsc#1012628). - checkpatch: fix the usage of capture group ( ... ) (bsc#1012628). - mm/migrate: fixup setting UFFD_WP flag (bsc#1012628). - mm/hugetlb: try preferred node first when alloc gigantic page from cma (bsc#1012628). - mm/hugetlb: fix a race between hugetlb sysctl handlers (bsc#1012628). - mm/khugepaged.c: fix khugepaged's request size in collapse_file (bsc#1012628). - cfg80211: regulatory: reject invalid hints (bsc#1012628). - net: usb: Fix uninit-was-stored issue in asix_read_phy_addr() (bsc#1012628). - commit 8b2a0ec - rpm/kernel-source.spec.in: Also use bz compression (boo#1175882). - commit 375ec84 - rpm/kernel-binary.spec.in: Also sign ppc64 kernels (jsc#SLE-15857 jsc#SLE-13618). - commit 971fc3d - coresight: fix offset by one error in counting ports (bsc#1175054). - commit 038472f - Update config files: enable a few missing Intel SOF and SST ASoC entries (bsc#1176200) - commit 87f4d0a ==== kmail ==== Subpackages: kmail-application-icons kmail-lang ktnef - Add Fix-Bug-426596.patch to fix a possible crash of the archivemail agent after changing its settings (boo#1176666, kde#426596, kde#425786, kde#424232) ==== libpipeline ==== Version update (1.5.0 -> 1.5.3) - update to 1.5.3: * Fix implementation-defined behaviour while handling read/write errors. * Port tests to the modern Check API. * `pipecmd_exec' now calls `_exit' rather than `exit', to avoid bugs such as * functions registered using `atexit' being called multiple times. * Document that standard FDs must be open before calling `pipeline_start'. * Building libpipeline now requires Autoconf >= 2.63 and Automake >= 1.11.2. * Various portability improvements, via Gnulib. ==== libyui-qt ==== Version update (2.54.0 -> 2.55.0) - Hide heading of the dialog when no title is defined. - Related to bsc#1175489. - 2.55.0 ==== mokutil ==== - Add mokutil-bsc1173115-add-ca-and-keyring-checks.patch to add options for CA and kernel keyring checks (bsc#1173115) + Add new BuildRequires: keyutils-devel + Add mokutil-remove-libkeyutils-check.patch to disable the version check of libkeyutils - Refresh mokutil-support-revoke-builtin-cert.patch ==== monitoring-plugins ==== Version update (2.2 -> 2.3~alpha.20200520T233014.cadac85e) Subpackages: monitoring-plugins-breeze monitoring-plugins-by_ssh monitoring-plugins-cluster monitoring-plugins-common monitoring-plugins-cups monitoring-plugins-dhcp monitoring-plugins-dig monitoring-plugins-disk monitoring-plugins-disk_smb monitoring-plugins-dns monitoring-plugins-dummy monitoring-plugins-file_age monitoring-plugins-flexlm monitoring-plugins-http monitoring-plugins-icmp monitoring-plugins-ide_smart monitoring-plugins-ifoperstatus monitoring-plugins-ifstatus monitoring-plugins-ircd monitoring-plugins-load monitoring-plugins-log monitoring-plugins-mailq monitoring-plugins-mrtg monitoring-plugins-mrtgtraf monitoring-plugins-nagios monitoring-plugins-nt monitoring-plugins-ntp_peer monitoring-plugins-ntp_time monitoring-plugins-nwstat monitoring-plugins-oracle monitoring-plugins-overcr monitoring-plugins-ping monitoring-plugins-procs monitoring-plugins-real monitoring-plugins-rpc monitoring-plugins-sensors monitoring-plugins-smtp monitoring-plugins-ssh monitoring-plugins-swap monitoring-plugins-tcp monitoring-plugins-time monitoring-plugins-ups monitoring-plugins-users monitoring-plugins-wave - Drop check_ping_fix_ip4.patch (obsolete, conflicts with upstream fix) - change version to 2.3~alpha.$date.$commit update to current git as of 20200520T233014.cadac85e changes summarized * detect unreachable dns service in nslookup output * check_curl: host_name may be null * update test parameter according to check_http * check_curl: use CURLOPT_RESOLVE to fix connecting to the right ip * workaround for issue #1550 - better use "ping -4" instead of "ping" if supported * Use size_t instead of int when calling sysctl(3) * check_tcp: add --sni * Fix timeout_interval declarations * check_curl: NSS, parse more date formats from certificate (in - C cert check) * check_curl: more tolerant CN= parsing when checking certificates (hit on Centos 8) * setting no_body to TRUE when we have a HEAD request * some LIBCURL_VERSION checks around HTTP/2 feature * added --http-version option to check_curl to choose HTTP * improved curlhelp_parse_statusline to handle both HTTP/1.x and HTTP/2 * check_curl: updates embedded picohttpparser to newest git version * setting progname of check_curl plugin to check_curl (at least for now) * Allow mariadbclient to be used for check_mysql * fix maxfd being zero * include -P switch in help * check_swap: repaired "-n" behaviour * improve command examples for 'at least' processes * check_mysql: Allow sockets to be specified to -H * Adding packages-warning option to check_apt plugin * Adding print top consuming processes option to check_load * check_snmp: make calcualtion of timeout value in help output more clear * [check_disk] add support to display inodes usage in perfdata * check_by_ssh: fix child process leak on timeouts * check_icmp: Add IPv6 support * check_dns: fix typo in parameter description * Also support the --show-body/-B flag when --expect is used * check_dns: improve support for checking multiple addresses * check_hpjd: Added -D option to disable warning on 'out of paper' * check_icmp: Do not overwrite -4,-6 on lookup * check_icmp: emit error if multiple protocol version * check_icmp: move opts string into a variable * check_cluster.c: Added data argument validation. * check_icmp: Correctly set address_family on lookup * check_icmp: process protocol version args first * check_icmp: Add IPv6 support - monitoring-plugins-1.4.6-no_chown.patch drop hunk for Makefile.in (not present in git) - monitoring-plugins.check_hpjd.c-64bit-portability-issue.patch update context - deleted monitoring-plugins-check_swap-fix-n.patch drop patch, is upstream - drop explicit attr in filelist for check_host and check_rta_multi as they are symlinks to check_icmp - add new subpackage monitoring-plugins-uptime - add patch monitoring-plugins-check_swap-fix-n.patch check_swap fix behaviour for "-n" if 0 free swap is left from git commit 6995b510759cf531d70745b7d0c6e8a0d9010b06 (bug#1175828) - updated context in monitoring-plugins-wrong_return_in_check_swap.patch ==== multipath-tools ==== Version update (0.8.4+183+suse.1817ce2 -> 0.8.4+192+suse.1bc10ad) Subpackages: kpartx libmpath0 - Bugref for all minor fixes since SLE15-SP2 release (bsc#1176670) - Added README.alua - Update to version 0.8.4+192+suse.1bc10ad: * Fix handling of hardware properties for maps without paths (bsc#1176644) - Update to version 0.8.4+190+suse.fe234ea: * Fixes for daemon shutdown issues from SLE(bsc#1110060, bsc#1110439) - multipathd: allow shutdown during configure() * fix compilation of external programs with -lmultipath (bsc#1133957, necessary after the above fix) * Minor upstream fixes ==== musepack ==== - Add libmpcdec-fastmath-no-const.patch: remove const declarations from some arrays which should not have them (boo#1176374). ==== mutt ==== Version update (1.14.6 -> 1.14.7) Subpackages: mutt-doc mutt-lang - update to 1.14.7: * Bug fix release. ==== nbd ==== - Remove firewalld service file - it's in the main firewalld package now. ==== noto-coloremoji-fonts ==== Version update (20200722 -> 20200916) - Update to v2020-09-16-unicode13_1 * Unicode 13.1 update ==== okular ==== Subpackages: okular-lang okular-spectre - Add patch to make the okular-spectre split more user friendly (boo#1176030): * 0001-Inform-users-about-the-okular-spectre-package-in-the.patch ==== opencc ==== Version update (1.0.5 -> 1.1.1) - update to 1.1.1 * Officially provide interface and TypeScript type annotations. * Update the dynamic link library `SOVERSION` to `1.1`, due to changes in the internal interface of C++. * Simplify the header file structure and speed up compilation. Remove unnecessary `using`. Repair some Hong Kong standard characters. * The new dictionary format `ocd2`, based on Marisa Trie 0.2.5. The dictionary size is greatly reduced. * Change the default conversion of "Yong/Yong" and modify multiple phrase conversions. * Add benchmark test results. * Officially supports Japanese new font conversion. * Upgrade Node.js dependency and improve compatibility. * Fix multiple multi-platform compilation and compatibility issues. * Correct a large number of conversion errors. ==== os-prober ==== Version update (1.76 -> 1.77) - update to 1.77: * Update Vcs-{Browser,Git} to point to salsa (alioth's replacement). * Add CI configuration for gitlab * Change priority of os-prober binary package to optional, since "Priority: extra" is now deprecated. * Remove trailing whitespaces from changelog file, to fix lintian tag. ==== perl-BerkeleyDB ==== Version update (0.63 -> 0.64) - updated to 0.64 see /usr/share/doc/packages/perl-BerkeleyDB/Changes 0.64 17 September 2020 * Refresh ppport.h 2a4ebf00b93977cfbffc65ecbcc0aac4f7cbad1d * Silence clang warning in call to "initial_value" https://github.com/pmqs/BerkeleyDB/issues/4 aa9c569b797bee78141ef319685d756bcef92a18 ==== pinfo ==== Version update (0.6.10 -> 0.6.13) - update to 0.6.13: - Fix crash on 32-bit architectures - minor release to fix the use of defualt colors (COLOR_DEFAULT) on ncurses installs; COLOR_DEFAULT values in pinforc were silently ignored, causing pinfo to use black-on-balc or white-on-white text - remove AM_MAINTAINER_MODE from autoconf scripts to make sure all necessary files are always rebuilt on ./configure && make - fix possibel buffer overflow (and compiler error with gcc 8.2) - Gracefully handle missing indirect info nodes - Fix infinite loop when regexp-matching an empty string - Fix loading of bare info pages (i.e., without .info extension) - Properly load info pages whose name starts with "dir" - Changes and tweaks to the auto* build tools - Get rid of inlined functions, which break building with gcc7 - Fix segfautl when closing unopened file - Fix typos in docs - Fix compiler warnings - Fix a number of out-of-buffer write, buffer overflows, string truncations - Clean up documentation - Correctly handle redirected stdin and/or stdout (https://bugs.debian.org/671306) - Fix crash after failed global search - Make curses mouse behaviour configurable Note: this changes the default behaviour to not capture the mouse. To restore the old behaviour, set GRAB-MOUSE=true in pinforc. - Avoid an infinite loop for malformed info pages - Add readline tab completion for nodes (https://bugs.debian.org/431708) - Correct parse node links that span multiple (indented) lines. - If a direct info page hit isn't found, try to look up a node in the dir - Improve lookup of info pages - Fix linking to man pages in a different section - Fix the -n/--node command line option - Fix issue with handling of suspend/resume and character input - New maintainer: Bas Zoetekouw <bas(a)debian.org> - License is now GPL version 2 only - Updated German, Dutch, English, Polish, Russian, Czech translations and added Basque, Swedish, Viernamese and Brazilian translations. Thanks to Jens Seidel, Rene van Bevern, Piarres Beobide, Krzysztof Krzyzaniak, Yuri Kozlov, Eddy Petri?or, Katarína Machálková, Clytie Siddall and Felipe Augusto van de Wiel. - Nodes containing a "." are now correctly found - Non-ASCII man pages are displayed correctly - Improved the history behavior of the search input line - Broken tag tables are now automatically fixed - Don't segfault when a broken regexp is entered - Fixed a number of segfaults caused by using uninitialized pointers and off-by-1 errors - Fixed heap corruption caused by non-ascii chars in info pages - Fixed a lot of patch searching issues - Fixed text display on narrow terminals - Fixed highlighting of searches - The default pinforc now uses the terminal's default foreground and background colors. Thanks to Rob Funk for a patch. - Use libreadline by default; readline version 4 is now required. - Better cooperation between ncurses and readline - Fixed some memory leaks - Got rid of tempnam() calls - Fixed -Wall and -Wshadow compiler warnings - Use utf8 in documentation files and fixed typoes - add 16dba5978146b6d3a540ac7c8f415eda49280847.patch 23c169877fda839f0634b2d193eaf26de290f141.patch: fix build issues with gcc 10 - remove pinfo-0.6.10-tinfo.patch, pinfo-0.6.9-nul-strings.patch pinfo-curses-detection.patch: upstream ==== python-alembic ==== Version update (1.4.2 -> 1.4.3) - update to version 1.4.3: * bug + Added support to drop named CHECK constraints that are specified as part of a column, rather than table wide. Previously, only constraints associated with the table were considered. References: #711 + Fixed issue where the MySQL dialect would not correctly render the server default of a column in an alter operation, if the operation were programmatically generated from an autogenerate pass as it would not accommodate for the full structure of the DefaultClause construct. References: #736 + Fixed issue where the CAST applied to a JSON column when copying a SQLite table during batch mode would cause the data to be lost, as SQLite?s CAST with JSON appears to convert the data to the value ?0?. The CAST is now skipped in a dialect-specific manner, including for JSON columns on SQLite. Pull request courtesy Sebastián Ramírez. References: #697 + The alembic current command no longer creates an alembic_version table in the database if one does not exist already, returning no version as the current version. This allows checking for migrations in parallel without introducing race conditions. Pull request courtesy Nikolay Edigaryev. References: #694 + Fixed issue where columns in a foreign-key referenced table would be replaced with null-type columns during a batch operation; while this did not generally have any side effects, it could theoretically impact a batch operation that also targets that table directly and also would interfere with future changes to the .append_column() method to disallow implicit replacement of columns. + Fixed issue where the mssql_drop_foreign_key=True flag on op.drop_column would lead to incorrect syntax error due to a typo in the SQL emitted, same typo was present in the test as well so it was not detected. Pull request courtesy Oleg Shigorin. References: #716 ==== spectacle ==== Subpackages: spectacle-lang - Add upstream patch to fix --output command line option (kde#424380): * 0001-Fix-wrong-file-name-when-output-option-is-used.patch ==== virtualbox ==== Subpackages: virtualbox-guest-tools virtualbox-guest-x11 - %service_del_postun_without_restart is not yet available in Leap 15.{1,2} of SLE15_SP1. For that reason, a workaround is added. - Make use of %service_del_postun_without_restart And stop using DISABLE_RESTART_ON_UPDATE as this interface is obsolete. ==== virtualbox-kmp ==== Version update (6.1.14_k5.8.7_1 -> 6.1.14_k5.8.10_1) - %service_del_postun_without_restart is not yet available in Leap 15.{1,2} of SLE15_SP1. For that reason, a workaround is added. - Make use of %service_del_postun_without_restart And stop using DISABLE_RESTART_ON_UPDATE as this interface is obsolete. ==== xf86-video-vesa ==== Version update (2.4.0 -> 2.5.0) - Update to version 2.5.0 "This release rolls up a few minor bug fixes since 2.4.0. We now refuse to run on machines with UEFI firmware (on Linux only, patches welcome for other OSes) since it won't work in the general case and you probably have a kernel framebuffer driver running already. We also only attempt to use 24bpp if the alternative would be pseudocolor, but note that since xserver 1.20 24bpp will not work at all. If you'd like to fix that case, please note that it is filed as issue #4: https://gitlab.freedesktop.org/xorg/driver/xf86-video-vesa/-/issues/4 We also notice several cases of running on emulated GPUs, in which case the shadow framebuffer is disabled by default to improve performance by reducing the number of copies. All users are recommended to upgrade, ideally to a better video card and/or driver." ==== xterm ==== Version update (353 -> 359) Subpackages: xterm-bin - update urls to use https (its 2020 after all) - Update to Patch#359 - 2020/08/17 * add special case in WriteText to allow colors 8-15 to override colorBDMode * add utf8Weblike resource, to provide an alternate scheme for handling ill-formed UTF-8 sequences * improve computation for the number of lines needed to scroll-up a SIXEL graphic * correct manpage description for default value of disallowWindowOps from changes in xterm #331 * correct a loop starting-point in refresh_graphics from optimization in patch #358 changes * add a new mouse mode 1016, which uses the same format as mode 1006, but sends the mouse's position in pixels * fix an issue from patch #338 changes where only the first selection buffer specified in the request would be updated using OSC 52 * modify makefile/scripts to allow DESTDIR to prefix the target directory for desktop-file-install * enable SIXEL feature by default. * update config.guess, config.sub * correct logic for decodeTerminalID changes in patch #357 * modify makefile to use plink.sh when linking test-programs, to fix build when using pcre * build-fix for test_ptydata program * several minor optimizations for the ReGIS and SIXEL features, improving performance by 10%. * add resource decGraphicsID to allow displaying graphics when the emulation level would ordinarily disallow this * add control sequences for fast switching of color palettes: XTPUSHCOLORS, XTPOPCOLORS, XTREPORTCOLORS * amend change for soft-hyphen from patch #328 to avoid stripping replacement-characters which would be shown with malformed or overlong UTF-8 input. * corrected an error-handling case in decodeUtf8, matching a similar fix in patch #268 * add a test-driver for ptydata.c * minor cleanup of macros * fix some errata in ctlseqs.ms * allow immediate repaint-on-palette-changed if double-buffering is enabled. * deprecate codes 10/11 in sgr push controls, changing those to 30/31, to avoid confusion with sgr 10-19. * modify SGR parameter handling to stop if an unrecognized parameter is encountered, to guard against malformed or nonstandard sequences * modify DECERA color for consistency with other erasures/clearing * ECH should not be masked by DECSCA * extend DECFRA and REP to accept any ?graphic? character rather than just Latin1, etc. * add -C option to 256colors2.pl and 88colors2.pl, to demonstrate mixed semicolon/colon separators which are implied by ECMA-48. * update sample terminfo to reflect the documentation improvements. * update description of 88/256/direct color in ctlseqs.ms to point out that using semicolons is a deprecated legacy feature, and standard terminal applications should use colons * modify configure-check for tgetent to conditionally include termcap.h, enabling configuration using clang's pedantic-errors option * remove some unnecessary pointer checks * accept terminal-id and add DA response for VT131, VT132. * revise fix for Debian #954730, which interfered with wheel mouse events * revise fix for Debian #954730, which interfered with wheel mouse events * fix typos in documentation * add mapping for decTerminalID for ?100? overlooked in patch #354. * update tables in wcwidth.c based on Unicode 13.0.0 * build-fix for ?make check? when building out-of-tree * work around performance problems of XDrawImageString and XDrawImageString16 functions * add a control sequence which reports xterm's version * temporarily set numeric locale category to "C" when parsing resources, so that scaleHeight and faceSize settings do not depend on locale * improve DA/DA2 response by ensuring that the decTerminalID maps to one of the known identifiers, as well as providing DA2 response for VT241 and VT382. * terminfo improvements: * add comments from ncurses which explain the keypad layouts. * add vt52+keypad from ncurses * use improved xm example for xterm+x11mouse, xterm+sm+1006 from ncurses 6.2 terminfo.src * two fixes for left/right wheel mouse event reporting * filter identical button-events * correct order of button-range versus protocol type * change ?make check? makefile-rule to use test-drivers for charclass and wcwidth data. * quiet ?did not find a usable xxx TrueType font? warnings by making fontWarnings apply to these messages * improve reinitialization of parameter list * temporarily set numeric locale category to "C" when formatting SVG or XHTML screendumps, to make the radix separator used in RGB values consistent * add resource forceXftHeight to control whether workaround from Debian #880407 is used. * apply updated ascent/descent in workaround from Debian #880407 to fix a 1-pixel gap in built-in vertical lines * improve round-off of scaling for built-in line-drawing * adjust fonts in svg-icon files to accommodate reduced functionality of new pango * improve configure check for X Toolkit library. * correct Y-coordinate transformation in ClearCurBackground, overlooked in changes for patch #334 * remove --vendor option from test-packages' install of desktop files; the feature is badly broken in gnome-shell. * modify uxterm to make it possible to select nonstandard locale C.UTF-8, e.g, if the user's locale is set to ?C? * re-save/tweak ?.svg? icon-files to work around breakage in toolset since the files were created in patch #283. N��r��y隊Z)z{.��r�+�맲��r��z�^�ˬz��N�(�֜��^� ޭ隊Z)z{.��r�+��0��Ǩ�

2 1

[opensuse-factory] Can't take care of praat anymore.
by Luigi Baldoni 28 Sep '20

28 Sep '20

Hello, I'm doing a clean up of the packages I maintain and I've come to the conclusion that I don't actually care about praat, so if nobody is interested in maintaining or at least co-maintaining it, it's going to slip into version obsolence or worse. Anyone willing to adopt this puppy? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] New package safeeyes
by opensuse.lietuviu.kalba 28 Sep '20

28 Sep '20

Hi, SafeEyes program's package "safeeyes" just entered into openSUSE Factory. You can find it in Education repository too [1,2] where it is developed. Safe Eyes protects your eyes from eye strain (asthenopia) by reminding you to take breaks while you're working long hours at the computer. It is a Free and Open Source Linux alternative for EyeLeo. Features: * Remind you to take breaks with exercises to reduce RSI * Disable keyboard during breaks * Notification before and after breaks * Smart pause if system is idle * Multi-screen support * Customizable user interface * RPC API to control externally * Command-line arguments to control the running instance * Customizable using plug-ins [1] https://software.opensuse.org/package/safeeyes [2] https://build.opensuse.org/package/show/Education/safeeyes -- Regards Mindaugas -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

Re: [opensuse-factory] New package safeeyes
by opensuse.lietuviu.kalba 28 Sep '20

28 Sep '20

2020-09-28 07:21, Huy Ngo rašė: > Thanks for the responses. I tried to install cairo-devel and > python3-pycairo You don't need -devel package at all (unless you are developer). > and it could run, but apparently it couldn't access X server. Generally it is expected that user run it from desktop menu. I you open *.desktop file, you can see, that it uses this command to run: env GDK_BACKEND=x11 safeeyes -- Regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20200925 released!
by Dominique Leuenberger 27 Sep '20

27 Sep '20

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: PackageKit apache2 appstream-glib (0.7.17 -> 0.7.18) aspell-dictionaries at-spi2-core (2.36.0 -> 2.36.1) autoyast2 (4.3.51 -> 4.3.53) bind branding-openSUSE brasero (3.12.2+20171213.567326a7 -> 3.12.2+20200906.5945fdff) busybox-links clutter dracut (050+suse.75.g266a76d9 -> 050+suse.226.gb86d9bcf) gegl glib2 (2.64.4 -> 2.64.5) glib2-branding-openSUSE gnome-desktop (3.36.5 -> 3.36.6) gnome-music (3.36.5 -> 3.38.0) gnome-settings-daemon gnome-shell grilo-plugins gsettings-desktop-schemas harfbuzz (2.6.8 -> 2.7.2) json-glib (1.4.4 -> 1.6.0) kaccounts-integration kio-extras5 kismet (2020_04_R3 -> 2020_09_R3) ldb (2.1.4 -> 2.2.0) libdlm libiptcdata (1.0.4 -> 1.0.5) libphonenumber (8.10.15 -> 8.12.10) libproxy libproxy-plugins libqt5-qtbase librubberband (1.8.1 -> 1.8.2) libsolv (0.7.14 -> 0.7.15) libssh (0.9.4 -> 0.9.5) libzypp (17.24.2 -> 17.25.0) mozilla-nss (3.55 -> 3.56) openSUSE-build-key pango (1.46.1 -> 1.46.2) perl-libwww-perl (6.47 -> 6.49) pipewire (0.3.10 -> 0.3.11) plymouth psutils (p17 -> 2.03) qemu samba (4.12.5+git.168.88cc07e6cbf -> 4.13.0+git.138.ff2d5480c67) sane-backends (1.0.30 -> 1.0.31) schily snapper (0.8.13 -> 0.8.14) sysconfig (0.85.5 -> 0.85.6) tracker (2.3.5 -> 2.99.5) tracker-miners (2.3.4 -> 2.99.5) tracker2 (2.3.5 -> 2.3.6) vim (8.2.1551 -> 8.2.1719) webkit2gtk3 (2.28.4 -> 2.30.0) wpa_supplicant xen (4.14.0_06 -> 4.14.0_08) yast2 (4.3.27 -> 4.3.29) yast2-firstboot (4.3.4 -> 4.3.5) yast2-network (4.3.20 -> 4.3.22) yast2-packager (4.3.7 -> 4.3.8) yast2-ruby-bindings (4.3.2 -> 4.3.4) zimg (2.9.3 -> 3.0.1) zypper (1.14.38 -> 1.14.39) === Details === ==== PackageKit ==== Subpackages: PackageKit-backend-zypp PackageKit-gstreamer-plugin PackageKit-gtk3-module PackageKit-lang libpackagekit-glib2-18 typelib-1_0-PackageKitGlib-1_0 - Add PackageKit-zypp-set-PATH.patch: zypp: Set PATH variable (gh#/hughsie/PackageKit/commit/2fb7fc6e, bsc#1175315). ==== apache2 ==== Subpackages: apache2-doc apache2-example-pages apache2-prefork apache2-utils - gensslcert: fix SAN in final cert generation ==== appstream-glib ==== Version update (0.7.17 -> 0.7.18) Subpackages: appstream-glib-lang libappstream-glib8 - Update to version 0.7.18: * Don't ignore localized strings that are the same as original * Croatian translation 2nd attempt (#373) * Test launchable tags in validation * Add missing dependency to the readme * as-app: Don't initialize mutex twice * as-content-rating: Expand translator comments to link to OARS website * as-content-rating: Lower the OARS/CSM mapping of sex-homosexuality/intense * po: Import gs-content-rating.c translations from gnome-software * po: Update po files * as-content-rating: Add content rating system APIs from gnome-software * Allow timestamp in the future in validate-relax * Fix crash with invalid children of <ul/> * as-app: Properly initialize unique_id_mutex * The AppData files now go to /usr/share/metainfo * util: Complete new validate-version command * util: Add "validate-version" command * trivial: Actually use the correct NEWS contents * trivial: post release version bump - Drop patch as-glib-PR359.patch (fixed upstream) - Run spec-cleaner * Remove rpm groups ==== aspell-dictionaries ==== Subpackages: aspell-cs aspell-da aspell-de aspell-el aspell-es aspell-fr aspell-hu aspell-it aspell-pl aspell-pt_BR aspell-pt_PT aspell-ru - update: - de -> 20161207-7-0 - pt_BR -> 20131030-12-0 - Fix boo#1076219. ==== at-spi2-core ==== Version update (2.36.0 -> 2.36.1) Subpackages: at-spi2-core-lang libatspi0 typelib-1_0-Atspi-2_0 - Update to version 2.36.1: + meson: De-duplicate deps of 'Requires' in pkgconfig file + Make at-spi-dbus-bus.desktop Validat + Fix ucs2keysym line for Euro sign + Fix Qt annotations in DBus xml files + constants: Fix typos in two _COUNT constants + Fix a couple of memory leaks. + Fix use after free when a device listener is destroyed. + Fix use after free when an event listener is destroyed. - Run spec-cleaner + Remove rpm groups ==== autoyast2 ==== Version update (4.3.51 -> 4.3.53) Subpackages: autoyast2-installation - Add the schema for 'backup' and 'upgrade' sections (bsc#1176834). - 4.3.53 - Set 0o600 permissions to the generated profile when cloning a system (bsc#1174202). - Add new action `yast2 autoyast check-profile` (related to bsc#1175735) which features: -- XML syntax check -- XML schema validation -- try to fetch the profile -- generate dynamic profile erb or classes/rules -- optional try to import profile and detect any issues with it -- optional run of scripts including dynamic profiles in pre-script -- 4.3.52 ==== bind ==== Subpackages: bind-chrootenv bind-doc bind-utils libbind9-1600 libdns1605 libirs1601 libisc1606 libisccc1600 libisccfg1600 python3-bind - Removed "-r /dev/urandom" from all invocations of rndc-confgen (init/named system/lwresd.init system/named.init in vendor-files) as this option is deprecated and causes rndc-confgen to fail. [bsc#1173311, bsc#1176674, bsc#1170713, vendor-files.tar.bz2] - /usr/bin/genDDNSkey: Removing the use of the -r option in the call of /usr/sbin/dnssec-keygen as BIND now uses the random number functions provided by the crypto library (i.e., OpenSSL or a PKCS#11 provider) as a source of randomness rather than /dev/random. Therefore the -r command line option no longer has any effect on dnssec-keygen. Leaving the option in genDDNSkey as to not break compatibility. Patch provided by Stefan Eisenwiener. [bsc#1171313, vendor-files.tar.bz2] - Put libns into a separate subpackage to avoid file conflicts in the libisc subpackage due to different sonums (bsc#1176092). ==== branding-openSUSE ==== Subpackages: grub2-branding-openSUSE libreoffice-branding-openSUSE plymouth-branding-openSUSE systemd-icon-branding-openSUSE wallpaper-branding-openSUSE yast2-qt-branding-openSUSE - Update branding-tumbleweed.zip: Rebrand all components of SLES/D in boot progress (jsc#SLE-14772). ==== brasero ==== Version update (3.12.2+20171213.567326a7 -> 3.12.2+20200906.5945fdff) Subpackages: brasero-lang brasero-nautilus libbrasero-burn3-1 libbrasero-media3-1 libbrasero-utils3-1 - Update to version 3.12.2+20200906.5945fdff: + Updated translations. - Disable tracker integration, as there is no Tracker 3 support: + --disable-search insted of --enable-search to configure: + Drop tracker-devel BuildRequires. ==== busybox-links ==== Subpackages: busybox-coreutils busybox-findutils busybox-gawk busybox-grep busybox-gzip busybox-patch busybox-psmisc busybox-sed busybox-sendmail busybox-tar busybox-xz - Add post/postun requires for busybox to busybox-sh (/usr/bin/ash is a symlink to busybox) ==== clutter ==== Subpackages: clutter-lang libclutter-1_0-0 typelib-1_0-Clutter-1_0 - Make documentation build reproducible ==== dracut ==== Version update (050+suse.75.g266a76d9 -> 050+suse.226.gb86d9bcf) - Update to version 050+suse.226.gb86d9bcf: We are now tracking the master branch, preparing for a 051 release within the next weeks. (the list includes changes previously backported) * 01fips: modprobe failures during manual module loading is not fatal * 01fips: turn info calls into fips_info calls * 04watchdog: split the watchdog module install * 35network-legacy: simplify fallback dhcp setup * 51-dracut-rescue.install: Don't use BLS fragment shipped by kernel package * 90crypt: make `rd.luks.key` usable with encrypted keydev. * 90crypt/module-setup.sh: try to catch kernel config changes * 90kernel-modules: add pci_hyperv * 90kernel-modules/module-setup.sh: add sg kernel module * 90kernel-modules: remove nfit from static module list * 90lvm: do not add newline to cmdline * 90nvdimm: include nvdimm keys in initrd * 90ppcmac: respect DRACUT_ARCH, don't exclude ppcle * 91zipl: parse-zipl.sh: honor SYSTEMD_READY * 95cifs: install new softdeps (sha512, gcm, ccm, aead2) * 95cifs: pass rootflags to mount * 95dcssblk: fix script permissions * 95fcoe: default rd.nofcoe to false * 95iscsi: fix ipv6 target discovery * 95iscsi: fix missing space when compiling cmdline args * 95iscsi: use ip_params_for_remote_addr() * 95nfs: only install rpc services for NFS < 4 when hostonly is strict * 95nfs: use ip_params_for_remote_addr() * 95nvmf: add module for NVMe-oF * 95nvmf: add NVMe over TCP support * 95nvmf: fix typo in the example documentation * 95resume: Do not resume on iSCSI, FCoE or NBD * 95zfcp_rules/parse-zfcp.sh: remove rule existence check * 95znet: Add a rd.znet_ifname= option * 99base: Remove duplicate nfsroot_to_var from dracut-lib.sh * 99memstrack: hook script should not call exit * 99memstrack: Only start tracking service when rd.memdebug=4|5 * 99squash: Don't hardcode the squash sub directories * 99squash: improve pre-requirements check * 99squash: simplify the code * Add 99memstrack module * Adding a bug report template * Adding a feature request template * Adding a pull request template * Adding code of conduct * Adding documentation template * Adding security policy * Adding the labels file for master * Adding the labels file for the RHEL-6 branch * Adding the labels file for the RHEL-7 branch * Adding the labels file for the RHEL-8 branch * Adding the labels trigger file for the Master branch * Adding the labels trigger file for the RHEL-6 branch * Adding the labels trigger file for the RHEL-7 branch * Adding the labels trigger file for the RHEL-8 branch * Add module "90nvdimm" for NVDIMM support * Add --version to man page * Allow $DRACUT_INSTALL to be not an absolute path * Always pull in machinery to read ifcfg files * As of v246 of systemd "syslog" and "syslog-console" switches have been deprecated * btrfs: force preload btrfs module * busybox: simplify listing of supported utilities * Change the order of NFS servers during the boot NFS server provided by DHCP in next-server option has higher priority than DHCP-server itself * CI: remove Fedora 30, add Fedora 32 * cms: regenerate NetworkManager connections * cryptroot-ask: no warn if /run/cryptsetup exist * dasd: only install /etc/dasd.conf if present * dhclient-script: Fix typo in output of BOUND & BOUND6 cases * dmsquash-live-root: Remove obsolete osmin.img processing. * Document initqueue/online hook * Do not start inside container * don't prefer $TMPDIR over --tmpdir * dracut.cmdline.7.asc: clarify usage of `rd.lvm.vg` and `rd.lvm.lv` * dracut.cmdline.7.asc: fix typo * dracut.conf.5.asc: document how to config --no-compress in the config * dracut-functions: add ip_params_for_remote_addr() helper * dracut-functions: fix find_binary() to return full path * dracut-initqueue: Print more useful info in case of timeout * dracut-lib.sh: quote variables in parameter expansion patterns * dracut.modules.7.asc: fix another typo * dracut.modules.7.asc: fix reference to insmodpost module * dracut.sh: add check for invalid configuration files * dracut.sh: Add --version * dracut.sh: don't call fsfreeze on subvol of root file system * dracut.sh: FIPS workaround for openssl-libs on Fedora/RHEL * dracut.sh: fix early microcode detection logic * dracut.sh: fix errors pointed out by shellcheck. * dracut.sh: fix ia32 detection for uefi executables * dracut.sh: fix some indentation. * dracut.sh: Move the library workaround after squash * dracut.spec: add 90nvdimm * dracut.spec: add version check for deprecated files * Fix CI badges in README.md and fix dracut description * Fix CoC URL * fix graphics startup failure with the rhgb paramter in CentOS8.2 * Fix pre-trigger stage by replacing exit with return in lldpad.sh * Fix test in lsinitrd * Fix Unicode * Fix Unicode and dracut install labeler * github actions: use test container directly * .github: fix path to label workflow mapping file * i18n: Always install /etc/vconsole.conf * install: also install post weak dependencies of kernel modules * Install crypto modules in 90kernel-modules * install dependant libs too * lvm: fix removal of pvscan from udev rules * lvm: remove unnecessary ${initdir} from lvm_scan.sh * Make externally defined CFLAGS work * Makefile: fix VERSION again * Makefile: merge main-version and git-version earlier * Makefile: really make externally defined CFLAGS work * match simplified rd.zfcp format too * match the whole string * mkinitrd-dracut.sh: use vmlinux regex for ppc*, vmlinuz for i686 * mkinitrd-suse.sh: Fix i586 platform detection * mount-root.sh: fix writing fstab file with missing fsck flag * multipath: add automatic configuration for multipath * net-lib.sh: support infiniband network mac addresses * network: fix glob matching ipv6 addresses * network-manager: ensure that nm-run.sh is executed when needed * network-manager: install libnss DNS and mDNS plugins * network-manager: move connection generation to a lib file * network-manager: set kernel hostname from the command line * New labels file * New label trigger file * README.md: fix github action badge links * Remove cleanup_trace_mem calls * Remove memtrace-ko and rd.memdebug=4 support in dracut * Remove stratis module * Removing dracut entry not compat with new plugin * Switching label triggers from pull requests to cron * systemd: skip dependency add for non-existent units * TEST-03-USR-MOUNT/test.sh: increase loglevel * TEST-12-RAID-DEG/create-root.sh: more udevadm settle * TEST-41-NBD-NM/Makefile: should be based on TEST-40-NBD not TEST-20-NFS * TEST-99: exclude /etc/dnf/* from check * test/TEST-35-ISCSI-MULTI: bump disk space * test: use dd from /dev/zero, instead of creating files with a hole * .travis.yml: reformat * UEFI Mode: only write kernel cmdline to UEFI binary * Update master-labels.yml * url-lib: drop NSS if it's not in curl --version * Use TMPDIR if available ==== gegl ==== Subpackages: gegl-0_4 gegl-0_4-lang libgegl-0_4-0 - Fix build on aarch64 by pre-loading libgomp.so.1 to avoid: "load error: /usr/lib64/libgomp.so.1: cannot allocate memory in static TLS block" ==== glib2 ==== Version update (2.64.4 -> 2.64.5) Subpackages: glib2-lang glib2-tools libgio-2_0-0 libgio-2_0-0-32bit libglib-2_0-0 libglib-2_0-0-32bit libgmodule-2_0-0 libgmodule-2_0-0-32bit libgobject-2_0-0 libgobject-2_0-0-32bit libgthread-2_0-0 libgthread-2_0-0-32bit - Update to version 2.64.5: + Fix deadlock in `g_subprocess_communicate_async()`. + Bugs fixed: glgo#GNOME/GLib!1519, glgo#GNOME/GLib!1520, glgo#GNOME/GLib!1565, glgo#GNOME/GLib!1608, glgo#GNOME/GLib!1618, glgo#GNOME/GLib!1621. ==== glib2-branding-openSUSE ==== - Update .gschema.override.in (jsc#SLE-14772): * add different key for screenlock * update background color for SLE. ==== gnome-desktop ==== Version update (3.36.5 -> 3.36.6) Subpackages: gnome-desktop-lang gnome-version libgnome-desktop-3-19 libgnome-desktop-3_0-common typelib-1_0-GnomeDesktop-3_0 - Add gnome-desktop-invalid-size-crash.patch: fix a crash caused by a malformed background xml file (bsc#1176596 glgo#GNOME/gnome-desktop#169). - Update to version 3.36.6: + No changes, version bump only. ==== gnome-music ==== Version update (3.36.5 -> 3.38.0) Subpackages: gnome-music-lang - Update to version 3.38.0: + Updated translations. - Update to version 3.37.92: + Port to Tracker 3. + Art retrieval complete rework. + Flatpak cleanups and updates. + Bugs fixed: - gnome-music gets stuck when next button is pressed when current song is about to finish. - Selection mode search doesn't work. - Selecting an album in albums view in selection mode randomly deselects other albums. - Selection mode only works for artists during search. - Music crashed if gnome-online-accounts is unavailable. - MPRIS playlist fixes. - Gracefully handle locale.{bind,}textdomain not being available. + Updated translations. - Replace pkgconfig(tracker-sparql-2.0) BuildRequires with pkgconfig(tracker-sparql-3.0): follow upstream changes. ==== gnome-settings-daemon ==== Subpackages: gnome-settings-daemon-lang - fix build on s390x (wacom=false but wayland=true) ==== gnome-shell ==== Subpackages: gnome-shell-calendar gnome-shell-lang - Update gnome-shell-fate324570-Make-GDM-background-image-configurable.patch: Bring noise-texture.png back which will be used as the default value of org.gnome.desktop.background.lockdialog picture-uri (boo#1176418). ==== grilo-plugins ==== Subpackages: grilo-plugin-tracker grilo-plugin-youtube grilo-plugins-lang - Switch to Tracker 3: + Drop tracker-devel BuildRequires: redundant dependency. + Replace pkgconfig(tracker-sparql-2.0) BuildRequires with pkgconfig(tracker-sparql-3.0). ==== gsettings-desktop-schemas ==== Subpackages: gsettings-desktop-schemas-lang - Update gsettings-desktop-schemas-fate324570-Add-key-for-GDM-background-configuration.patch: Set noise-texture.png as the default value of picture-uri to avoid failed to load background error (boo#1176418). ==== harfbuzz ==== Version update (2.6.8 -> 2.7.2) Subpackages: libharfbuzz-gobject0 libharfbuzz-icu0 libharfbuzz0 libharfbuzz0-32bit typelib-1_0-HarfBuzz-0_0 - update to 2.7.2: - Fix a regression in the previous release that caused a crash with Kaithi. - More OOM fixes. - ot-funcs now handles variable empty glyphs better when hvar/vvar isn't present. - Reverted a GDEF processing regression. - A couple of fixes to handle OOM better. - Use an implementation for round that always rounds up, some minor fluctuations are expected on var font specially when hb-ot callback is used. - Fix an AAT's `kerx` issue on broken rendering of Devanagari Sangam MN. - Remove AAT's `lcar` table support from _get_ligature_carets API, not even much use on macOS installed fonts (only two files). GDEF support is the recommended one and expected to work properly after issues fixed two releases ago. - Minor memory fixes to handle OOM better specially in hb-ft. - Minor .so files versioning scheme change and remove stable/unstable scheme differences, was never used in practice (always default to stable scheme). - We are now suggesting careful packaging of the library using meson, https://github.com/harfbuzz/harfbuzz/wiki/Notes-on-migration-to-meson for more information. - Distribution package URL is changed, either use GitHub generated tarballs, `https://github.com/harfbuzz/harfbuzz/archive/$pkgver.tar.gz` or, even more preferably use commit hash of the release and git checkouts like, `git+https://github.com/harfbuzz/harfbuzz#commit=$commit` ==== json-glib ==== Version update (1.4.4 -> 1.6.0) Subpackages: json-glib-lang libjson-glib-1_0-0 typelib-1_0-Json-1_0 - Update to version 1.6.0: + docs: Add missing index for 1.6 symbols. + Updated translations. - Add gtk-doc BuildRequires and build gtk-doc api documentation and manpages via passing man=true and gtk_doc=enabled to meson. - Add check section and run meson_test macro during build. - Drop obsolete nuking of .la files, no longer needed. - Update to version 1.5.2: + Add getters with default fallback for JsonObject. + Clarify some expections of the json_object_get_*_member APIs. + Fix getting immutable root nodes from empty input. + Add `--output` option to json-glib-format. + Support loading files via memory mapping. + Add a symbol version to all exported symbols. - Pass -Dgtk_doc=disabled to meson: keep the gtk-doc disabled for now. ==== kaccounts-integration ==== Subpackages: kaccounts-integration-lang libkaccounts2 - The -devel package needs intltool - Don't hardcode sover everywhere - Mention the sover in %files ==== kio-extras5 ==== Subpackages: kio-extras5-lang libkioarchive5 - Remove obsolete build dependencies: openslp, KDELibs4Support, KHtml, exiv2 ==== kismet ==== Version update (2020_04_R3 -> 2020_09_R3) Subpackages: kismet-capture-freaklabs-zigbee kismet-capture-linux-bluetooth kismet-capture-linux-wifi kismet-capture-nrf-51822 kismet-capture-nrf-mousejack kismet-capture-sdr-rtl433 kismet-capture-sdr-rtladsb kismet-capture-sdr-rtlamr kismet-capture-ti-cc2540 kismet-logtools - Update to version 2020-09-R3 * Properly show messages from datasources * Properly show error and status messages from opening datasources, which previously were ignored. This should make seeing errors opening datasources much easier. * Fix bluetooth capture on some platforms * Some platforms / kernels / setups appear to not enable rfkill. The bluetooth hci capture source erroneously failed when no rfkill information was available. * Remove 221 IE tag subtype match requirement * Remove requiring a subtype of 0 on an IE221 tag for matching the manufacturer of otherwise unknown devices. * Fix potential crash in datasource panel * Fix a long-standing potential crash when the datasource panel is open in the UI caused by a race condition with the constructor and callbacks. * Fix race condition in launching datasources * Fix a long-standing race condition which could lead to some datasources not being opened properly or their types autodetected properly due to a race condition with the type probe code. * Increase precision of some doubles in JSON for GPS * Found some legacy serialization code which reduced the precision of some doubles (double-vector) which would cause GPS to display with less precision. * Don?t shut down messagebus processing thread until Kismet is fully exiting * The messagebus service thread could shut down before Kismet had finished spinning down, causing it to not show some of the errors causing the shutdown. * Fix moodycamel fast queue for gcc 9.2.0 * Merge fix from cameron314/moodycamel to the fast concurrent queue library for compiling on gcc 9.2.0 * Add new device locking API * Add new device locking API for internal range locking of devices to better protect records during updates between threads. - Add patch: * kismet-fix-build.patch (revert 3c8f8d83) - Update to version 2020-09-R2 * Save more RAM! * Fix a very silly error in kismetdb_dump_devices * The kismetdb_dump_devices tool was broken and printed out the JSON twice, generating an invalid JSON file. * Tweak how IE221 manufacturers are derived * Look for some specific AP manufacturers in the IE221 tags, and then fall back to using generic 221 manufacturers. * Fix packet RRD in main device table * Fix the packet RRD in the main device table not scrolling properly * Generally clean up compiling and squash a number of warnings during compiling * Fix a bug classifying some devices as APs * Some devices doing an inter-ds communication (like a chromecas and a phone) got flagged as APs when they?re not really. - Update to version 2020-09-R1 * Kismet server auto-discovery * New SSID details window to go along with the SSID views * New ?MAC censorship? demo option in the web UI * Split advertised and responded APs * Significant memory optimizations * New optimized internal field building * Optimized ?multikey-as-dictionary? API * Verbose output on remote capture tools * Expanded ICAO databases for ADSB * Compressed server-side ICAO databases * More memory control options * New greatly simplified JSON generation and parsing * Support for non-packet scan reports * New event bus extension to the Kismet helper protocol * New kismetdb_to_pcap tool * Configuration flavors/override system * Packet rate graphs * More manufacturer indexing * Optimized internal map structure * Lots and lots of bug fixes and minor updates ==== ldb ==== Version update (2.1.4 -> 2.2.0) Subpackages: libldb2 libldb2-32bit python3-ldb - Release ldb 2.2.0 + Fix memory leak in ldb_kv_index_dn_ordered(); (bso#14299) + Fix off-by-one increment in lldb_add_msg_attr; (bso#14413) ==== libdlm ==== Subpackages: libdlm3 - Add dependency relationship between libdlm and dlm-kmp (bsc#1121380) ==== libiptcdata ==== Version update (1.0.4 -> 1.0.5) Subpackages: libiptcdata-lang libiptcdata0 - update to 1.0.5: * Omnibus python3 update * Modernize autoconf/automake init * Update to latest gtk-doc * Fix python3 module init ==== libphonenumber ==== Version update (8.10.15 -> 8.12.10) - Update to v8.12.10: * See https://github.com/google/libphonenumber/blob/v8.12.10/release_notes.txt - The upstream repo and tarball include binary .jar archives with legally questionable content. Switch to a _service and exclude those. - Update to v8.12.9 * see https://github.com/google/libphonenumber/blob/v8.12.9/release_notes.txt ==== libproxy ==== - Build with KDE on Tumbleweed, Leap and SLE releases greater than SLE-15-SP2 (jsc#SLE-12256). ==== libproxy-plugins ==== Subpackages: libproxy1-config-gnome3 libproxy1-config-kde libproxy1-networkmanager libproxy1-pacrunner-webkit - Build with KDE on Tumbleweed, Leap and SLE releases greater than SLE-15-SP2 (jsc#SLE-12256). ==== libqt5-qtbase ==== Subpackages: libQt5Concurrent5 libQt5Core5 libQt5DBus5 libQt5Gui5 libQt5Network5 libQt5OpenGL5 libQt5PrintSupport5 libQt5Sql5 libQt5Sql5-mysql libQt5Sql5-sqlite libQt5Test5 libQt5Widgets5 libQt5Xml5 libqt5-qtbase-platformtheme-gtk3 - Revert commit to fix screen geometry on startup (boo#1176750, QTBUG-86604): * 0001-Revert-Emit-QScreen-availableG-g-eometryChanged-on-l.patch ==== librubberband ==== Version update (1.8.1 -> 1.8.2) - Update to version 1.8.2 * Fix a number of small memory leaks * Make stretcher more robust to being fed invalid input (with NaNs) * Various platform build fixes and improvements * The API is unchanged and the library is binary compatible with version 1.7. - Refreshed rubberband-mk.patch - Spec cleanup ==== libsolv ==== Version update (0.7.14 -> 0.7.15) Subpackages: libsolv-tools python3-solv ruby-solv - fix deduceq2addedmap clearing bits outside of the map - conda: feature depriorization first - conda: fix startswith implementation - move find_update_seeds() call in cleandeps calculation - set SOLVABLE_BUILDHOST in rpm and rpmmd parsers - new testcase_mangle_repo_names() function - new solv_fmemopen() function - bump version to 0.7.15 - Enable zstd compression support for sle15 - Enable zstd compression support for sle15-sp2 ==== libssh ==== Version update (0.9.4 -> 0.9.5) Subpackages: libssh-config libssh4 - Add missing BR for openssh needed for tests - update to 0.9.5 (bsc#1174713, CVE-2020-16135): * CVE-2020-16135: Avoid null pointer dereference in sftpserver (T232) * Improve handling of library initialization (T222) * Fix parsing of subsecond times in SFTP (T219) * Make the documentation reproducible * Remove deprecated API usage in OpenSSL * Fix regression of ssh_channel_poll_timeout() returning SSH_AGAIN * Define version in one place (T226) * Prevent invalid free when using different C runtimes than OpenSSL (T229) * Compatibility improvements to testsuite ==== libzypp ==== Version update (17.24.2 -> 17.25.0) - RepoInfo: Return the type of the local metadata cache as fallback (bsc#1176435) - VendorAttr: Fix broken "suse,opensuse" equivalence handling. Enhance API and testcases. (bsc#1174918) - Update docs regarding 'opensuse' namepace matching. - New solver testcase format. - Link against libzsd to close libsolvs open references (as we link statically) - BuildRequires: libsolv-devel >= 0.7.15. - version 17.25.0 (22) ==== mozilla-nss ==== Version update (3.55 -> 3.56) Subpackages: libfreebl3 libfreebl3-hmac libsoftokn3 libsoftokn3-hmac mozilla-nss-certs mozilla-nss-tools - Update nss-fips-approved-crypto-non-ec.patch to match RC2 code being moved to deprecated/. - Remove nss-fix-dh-pkcs-derive-inverted-logic.patch. This was made obsolete by upstream changes. - update to NSS 3.56 Notable changes * bmo#1650702 - Support SHA-1 HW acceleration on ARMv8 * bmo#1656981 - Use MPI comba and mulq optimizations on x86-64 MacOS. * bmo#1654142 - Add CPU feature detection for Intel SHA extension. * bmo#1648822 - Add stricter validation of DH keys in FIPS mode. * bmo#1656986 - Properly detect arm64 during GYP build architecture detection. * bmo#1652729 - Add build flag to disable RC2 and relocate to lib/freebl/deprecated. * bmo#1656429 - Correct RTT estimate used in 0-RTT anti-replay. * bmo#1588941 - Send empty certificate message when scheme selection fails. * bmo#1652032 - Fix failure to build in Windows arm64 makefile cross-compilation. * bmo#1625791 - Fix deadlock issue in nssSlot_IsTokenPresent. * bmo#1653975 - Fix 3.53 regression by setting "all" as the default makefile target. * bmo#1659792 - Fix broken libpkix tests with unexpired PayPal cert. * bmo#1659814 - Fix interop.sh failures with newer tls-interop commit and dependencies. * bmo#1656519 - NSPR dependency updated to 4.28 - do not hard require mozilla-nss-certs-32bit via baselibs (boo#1176206) ==== openSUSE-build-key ==== - the container keys for openSUSE and SUSE Linux Enterprise are actually not the build keys. (bsc#1176818) - build(a)suse.de key for SLE12 was extended. (bsc#1176759) ==== pango ==== Version update (1.46.1 -> 1.46.2) Subpackages: libpango-1_0-0 libpango-1_0-0-32bit typelib-1_0-Pango-1_0 - Update to version 1.46.2: + Fix pango_win32_font_map_load_font with falback families. + Fix an assertion in pango_language_get_scripts. + Fix a crash in get_items_log_attrs. + Fix attribute iterators with overlapping attributes. + Fix rendering of Emoji keycap sequences. + ci: Run the testsuite under asan and fix all reported issues. + build: Make libthai, cairo, xft, fontconfig, freetype dependencies meson features. ==== perl-libwww-perl ==== Version update (6.47 -> 6.49) - updated to 6.49 see /usr/share/doc/packages/perl-libwww-perl/Changes 6.49 2020-09-24 00:27:56Z - Require network testing enabled for t/redirect.t (GH#351) (Olaf Alders) - updated to 6.48 see /usr/share/doc/packages/perl-libwww-perl/Changes 6.48 2020-09-20 15:25:51Z - Support 308 Permanent Redirect (GH#349) (Galen Huntington) ==== pipewire ==== Version update (0.3.10 -> 0.3.11) Subpackages: libpipewire-0_3-0 pipewire-modules pipewire-spa-plugins-0_2 pipewire-spa-tools pipewire-tools - Update to version 0.3.11: * PipeWire improvements + Properly cleanup the mixer structures when a port is removed, this should fix client crashes related to port config changes and other random crashes. + Optimize the preferred formats in the audio converter. Higher quality formats with higher performance are chosen first. + Make sure the time reported by pw_stream is always increasing, even when the driver and clock changes. + There is now also a system service and socket that can be used to enable PipeWire systemwide. This is however not recommended and disabled by default. + Fix channelmixer 5.1 to stereo mix matrix. It was not reading the conversion matrix correctly and cause channels to be dropped. The channelmixer will now also normalize the volume, like what pulseaudio does. + The channelmixer will now just copy channels when no layout has been given. It has also optimized paths for this. This makes it possible for apps to request > 8 channels from the alsa plugin (ardour). + Port, Node and Link will now also emit an error on the resources in addition to updating the error in the info. This would make it easier to track negotiation errors in the session manager later. + many small fixes and cleanups. + Fix compatibility: - DOSBox: fix crash because of double free in pw_stream * Session manager improvements + The session manager will now try to configure the client to the channel configuration of the sink/source. It will only do this for downmixing, never for upmixing and also never when the client has the dont-remix property set. It will also renegotiate the channel layout when moving a stream to a new sink/source. + Configuration state is now saved in XDG_CONFIG_HOME. Previously it was saved in $HOME/.pipewire-media-session/ You can migrate the state by moving the files to $XDG_CONFIG_HOME/pipewire-media-session (or $HOME/.config/pipewire-media-session as a fallback when XDG_CONFIG_HOME is not set). * Device support + Bluetooth sources and sinks should work better now. + There is now also a new bluetooth backend using hsphfpd. + fix the ALSA UCM Off profile for alsa pcm devices + improve ALSA port and profile switching. The ACP device will now switch to the best port and profile when availability changes. * PulseAudio layer improvements + Implement some more callbacks. The pulse layer will now also notify applications of stream moved, started and latency changes. + Fix error code when an object was not found. We now return PA_ERR_NOENTITY instead of PA_ERR_INVALID. + Add some support for loading new null sinks. Applications such as pulseeffects use this. Note that pulseeffects does not yet work reliably but can start now. + Improve handling of profile and port updates, it should work much more reliable now. Apps should now also again receive volume updates from sinks/sources. + Fix compatibility: - openal-soft 1.20 - pavucontrol (checks PA_ERR_NOENTITY) * JACK layer improvements + improve default source and sink handling. It was not updated correctly in all cases. + add samplerate and period to the pw-jack wrapper to easily configure the desired samplerate and perdiod for the app. * ALSA plugin improvements + Add a mixer entry in the alsa config file. + Implement support for planar types, rework the processing function to make it more robust. + refuse to load the alsa plugin when linked against 0.2. This catches some old apps linked against 0.2 that want to use the alsa plugin. + Fix compatibility: - linphone (ALSA SIGFPE when _status() is called before _prepare()). - Add patch from upstream to fix audio stutters in discord and probably other applications when using alsa directly. * 0001-alsa-dont-change-the-resampler-delay-value.patch ==== plymouth ==== Subpackages: libply-boot-client5 libply-splash-core5 libply-splash-graphics5 libply5 plymouth-dracut plymouth-plugin-label plymouth-plugin-label-ft plymouth-plugin-two-step plymouth-scripts plymouth-theme-bgrt plymouth-theme-spinner - Add plymouth-no-longer-modify-conf-to-drop-isopensuse-macro.patch: plymouth will use plymouthd.defaults instead of plymouth.conf and packge plymouthd.defaults in a seperet RPM. this can avoid change SUSE or openSUSE branding section with is_opensuse macro in the config file. means this modification can close the leaps gap (jsc#SLE-11637). - Update plymouth.spec: Dropping gdm transition because it has alreay deprecated by upstream. Removing git build dependency. ==== psutils ==== Version update (p17 -> 2.03) - The previous update makes trhe patches * psutils-flip.dif (is part of upstream now) * psutils-p17.dif (does not apply due move from C to perl) * psutils-pserror.dif (does not apply due move from C to perl) obsolete - Update to v2.03 (no changelog) ==== qemu ==== Subpackages: qemu-arm qemu-block-curl qemu-block-dmg qemu-block-gluster qemu-block-iscsi qemu-block-nfs qemu-block-rbd qemu-block-ssh qemu-chardev-baum qemu-guest-agent qemu-hw-display-qxl qemu-hw-usb-redirect qemu-hw-usb-smartcard qemu-ipxe qemu-ksm qemu-kvm qemu-lang qemu-microvm qemu-ppc qemu-s390 qemu-seabios qemu-sgabios qemu-tools qemu-ui-curses qemu-ui-gtk qemu-ui-sdl qemu-ui-spice-app qemu-vgabios qemu-vhost-user-gpu qemu-x86 - Fix spec file, where a conditional macro didn't have the correct syntax (bsc#1176766) ==== samba ==== Version update (4.12.5+git.168.88cc07e6cbf -> 4.13.0+git.138.ff2d5480c67) Subpackages: libdcerpc-binding0 libdcerpc-binding0-32bit libdcerpc0 libdcerpc0-32bit libndr-krb5pac0 libndr-krb5pac0-32bit libndr-nbt0 libndr-nbt0-32bit libndr-standard0 libndr-standard0-32bit libndr1 libndr1-32bit libnetapi0 libnetapi0-32bit libsamba-credentials0 libsamba-credentials0-32bit libsamba-errors0 libsamba-errors0-32bit libsamba-hostconfig0 libsamba-hostconfig0-32bit libsamba-passdb0 libsamba-passdb0-32bit libsamba-policy0-python3 libsamba-util0 libsamba-util0-32bit libsamdb0 libsamdb0-32bit libsmbclient0 libsmbconf0 libsmbconf0-32bit libsmbldap2 libsmbldap2-32bit libtevent-util0 libtevent-util0-32bit libwbclient0 libwbclient0-32bit samba-client samba-client-32bit samba-doc samba-libs samba-libs-32bit samba-libs-python3 samba-python3 samba-winbind samba-winbind-32bit - Update to samba 4.13.0 + Require Python 3.6 + Move wide links functionality into VFS module + Deprecate NT4-like 'classic' Samba domain controllers + Deprecate SMBv1 only protocol options + Remove deprecated "ldap ssl ads" option + Unify asynchronous DCE-RPC server; (jsc#SES-645) + Replay multichannel lease break requests; (bso#11897); (jsc#SES-655) + Drop internal byteorder.h header from util-devel package + Remove final code for the AD DC LDAP backend + Add AD DC Group Policy Scripts + Only use gnutls_aead_cipher_encryptv2() for GnuTLS > 3.6.14; (bso#14399) + Fix %U substitutions if it contains a domain name; (bso#14467) + Fix krb5.conf creation for 'net ads join'; (bso#14479) + Fix build problem if libbsd-dev is not installed; (bso#14482) + Toggle vfs_snapper using "--with-shared-modules"; (bso#14437) + Fix idmap_ad RFC4511 response handling; (bso#14465) + Fix panic in get_lease_type(); (bso#14428) - Update to samba 4.12.7 + CVE-2020-1472(ZeroLogon): s3:rpc_server/netlogon: Protect netr_ServerPasswordSet2 against unencrypted passwords; (bsc#1176579); (bso#14497); + CVE-2020-1472(ZeroLogon): s3:rpc_server/netlogon: Support "server require schannel:WORKSTATION$ = no" about unsecure configurations; (bsc#1176579); (bso#14497); + CVE-2020-1472(ZeroLogon): s4 torture rpc: repeated bytes in client challenge; (bsc#1176579); (bso#14497); + CVE-2020-1472(ZeroLogon): libcli/auth: Reject weak client challenges in netlogon_creds_server_init() "server require schannel:WORKSTATION$ = no"; (bsc#1176579); (bso#14497); - Update to samba 4.12.6 + s3: libsmb: Fix SMB2 client rename bug to a Windows server; (bso#14403). + dsdb: Allow "password hash userPassword schemes = CryptSHA256" to work on RHEL7; (bso#14424). + dbcheck: Allow a dangling forward link outside our known NCs; (bso#14450). + lib/debug: Set the correct default backend loglevel to MAX_DEBUG_LEVEL; (bso#14426). + PANIC: Assert failed in get_lease_type(); (bso#14428). + util: Fix build on AIX by fixing the order of replace.h include; (bso#14422). + srvsvc_NetFileEnum asserts with open files; (bso#14355). + KDC breaks with DES keys still in the database and msDS-SupportedEncryptionTypes 31 indicating support for it; (bso#14354). + s3:smbd: Make sure vfs_ChDir() always sets conn->cwd_fsp->fh->fd = AT_FDCWD; (bso#14427). + PANIC: Assert failed in get_lease_type(); (bso#14428). + docs: Fix documentation for require_membership_of of pam_winbind.conf; (bso#14358). + ctdb-scripts: Use nfsconf utility for variable values in CTDB NFS scripts; (bso#14444). + s3:winbind:idmap_ad: Make failure to get attrnames for schema mode fatal; (bso#14425). ==== sane-backends ==== Version update (1.0.30 -> 1.0.31) Subpackages: libsane1 sane-backends-autoconfig - Upgraded to sane-backends version 1.0.31 Changes since 1.0.30 see https://gitlab.com/sane-project/backends/-/blob/master/NEWS Backends * adds the canon_lide70 backend * avision: adds support for the KODAK i1120, fixes thread cancellation issues, disables exposure option for non-filmscanners * canon_dr: improves error reporting * dmc: fixes compiler warnings on the scan area options * epsonds: rewrites the network I/O following changes made to the epson2 backend in 1.0.30 to fix security issues. Network support is still unsupported. * escl: adds ADF support, fixes many minor issues and improves error handling. Now also supports devices behind a proxy (needs explicit configuration). * fujitsu: adds support for the fi-800R and a card scanning slot, fixes a bug when reading hardware sensors on the first invocation. Adds USB IDs for fi-7800 and fi-7900. * genesys: adds support for the Canon 5600F, Canon LiDE 90, Plustek OpticFilm 7200 and 7200 (v2), 7400, 7600i, 8100 and 8200i. Fixes several issues with the Canon 8600F. Adds 4800dpi support for the Canon LiDE 210 and fixes 3200dpi flatbed support on the Canon 8400F. Adds an option to fill dark calibration with a constant. Adds transparency support for gl847 chipset based devices. Fixes CIS scanner support for gl842 chipset based devices. Removes lineart and image enhancement emulation support. * gphoto: supports the PLANon DocuPen RC800 (with a recent enough version of gphoto2) * gt68xx: modifies scan cancellation behaviour * hp5400: adds button support, fixes a scan cancellation crash issue * pixma: add supports for the i-SENSYS MF440 Series and untested support for the PIXMMA G7000 Series and GM4000 Series as well as the i-SENSYS MF720 Series. * plustek: fixes a potential buffer overrun * test: adds gamma options Documentation * removes the SANE Standard. This is now maintained as a separate project at https://gitlab.com/sane-project/standard HTML and PDF versions can be found at https://sane-project.gitlab.io/standard/ * adds and updates information for multiple supported and unsupported devices * translation updates for British English, French, German, Italian and Ukranian * scanimage: documents the JPEG compression level * minor improvements documenting build requirements Build * removes the --with-api-spec option from configure * replaces the --enable-avahi option with an --with-avahi that defaults to enabling if possible. If the option is given and the required support is not available, configure will exit with an error. * improves checking for libjpeg version dependent requirements * has been made reproducable (upstream issue 228) * fixes build issues on MinGW Miscellaneous * various fixes and improvements in the USB record/replay support * fixes a file descriptor validation test in sanei_pio * adds missing include in sanei_usb - sane-backends.builttime.patch is no longer needed because the issue https://gitlab.com/sane-project/backends/-/issues/228 is fixed in the upstream sources ==== schily ==== Subpackages: cdda2wav cdrecord libcdrdeflt1_0 libdeflt1_0 libedc_ecc1_0 libedc_ecc_dec1_0 libfile1_0 libfind4_0 libparanoia1_0 librmt1_0 librscg1_0 libscg1_0 libscgcmd1_0 libschily2_0 mkisofs readcd spax star - Update to release 2020.09.22 * SCCS: delta now supports to handle nul bytes in the diff(1) output. * SCCS: delta now supports nul bytes in the new version of the input file if processing SCCSv6 history files. * SCCS: delta now by default uses `fsdiff` instead of `bdiff`. * SCCS: delta, if called as `delta -d ...`, now calls diff(1) with the option -a. ==== snapper ==== Version update (0.8.13 -> 0.8.14) Subpackages: libsnapper5 snapper-zypp-plugin - added option to cleanup to make requested free space available (jsc#SLE-15765) - version 0.8.14 ==== sysconfig ==== Version update (0.85.5 -> 0.85.6) Subpackages: sysconfig-netconfig - version 0.85.6 - netconfig: execute chrony/helper in /usr/libexec with fallback to it's previous location in /usr/lib (boo#1176285) - netconfig: only write files like /etc/resolv.conf on content change to avoid that e.g. dnsmasq (if running) re-reads the /etc/resolv.conf and re-initializes itself (bsc#1176325) ==== tracker ==== Version update (2.3.5 -> 2.99.5) Subpackages: tracker-lang - Update to version 2.99.5: + Fix DBus logging in tracker-sandbox test helper. + Removed programming terms from English stop word list. + Handle empty input correctly. + Fix possible database locks when using "tracker3 sql" on a running database. + Fixes for SERVICE clauses in UNIONs. + Handle empty group graph patterns as per the spec. + Fixes to property paths being used in different graphs. + Release memory on inactivity. + Fix build/linking with 2.x in the system. + Add "tracker3 export --2to3" helper for data migrations. + Hide FTS5 search syntax from fts:match. + Updated translations. - Update to version 2.99.4: + CLI modernization: - integration with pager. - bash completion for endpoints. + Use curly quotes consistently in CLI options. + SPARQL parsing fixes. + Multiple fixes around 'VALUES' SPARQL syntax. + Fix race conditions around graph creation. + Better use of asserts in tests. - Changes from version 2.99.3: + Add portal. + Use WAL on all database connections. + Fix race conditions in reusable statements. + Documentation fixes and improvements. + Better errors from library function calls. + Test fixes. + CI improvements. - Changes from version 2.99.2: + Dropped priority argument from tracker_sparql_connection_update*(). + Better parser error messages. + SPARQL correctness fixes. + Fixes to tracker_sparql_cursor_is_bound() checks. + Ontology clean ups and sync ups with Nepomuk. + Fixed lifetime of blank node labels. + Fixes to recursive property paths. + Ensure property functions pick non NULL values. + Several fixes merge SERVICE{} data with the local graph pattern. + Add `tracker export --show-graphs` CLI subcommand to show available graphs. + Parameter bindings within SERVICE{} clauses are now allowed. + Fixes to single/double quote escaping. + Fixes to make tracker-sandbox more usable in tests. + Many cleanups, memory leak and performance fixes. - Changes from version 2.99.1: + Highlighted updates compared to 2.x: - A full implementation of SPARQL 1.1/ - A change of paradigm. There is no central store, services are free to create their own, and to make those an endpoint for public access. Applications may syndicate queries across external endpoints through the SERVICE syntax. - No tracker-store. - No libtracker-miner. - No libtracker-control. + API changes: - Explicit API to create a local store, or proxy a DBus/remote one. - TrackerEndpoint proxies local stores out of process. - separate python library to write tests. + A base and reference ontologies of our own: - Officially it's no longer Nepomuk. - No more broken links. + An extensible CLI tool, with a generic set of core subcommands. + Parallel installable to tracker 2.x. - Bump TrackerAPI to 3.0 and RPMTrackerAPI to 3_0. - Drop tracker-ontology-upgrades.patch: fixed upstream. - Drop pkgconfig(libnm) BuildRequires: no longer needed. - Add pkgconfig(systemd) buildRequires: explicitly checked for and used to be pulled in by libnm. - No longer pass -Dsystemd_user_services=%{_userunitdir} to meson: not needed anymore. - Disable test suite for now: need to workout to run it without X. - Drop subpackages that no longer exist due to upstream changes and remove their dependency from the -devel package: + libtracker-control-%{RPMTrackerAPI}-0 + libtracker-miner-%{RPMTrackerAPI}-0 + typelib-1_0-TrackerControl-%{RPMTrackerAPI} + typelib-1_0-TrackerMiner-%{RPMTrackerAPI} ==== tracker-miners ==== Version update (2.3.4 -> 2.99.5) Subpackages: tracker-miner-files tracker-miners-lang - Update to version 2.99.5: + Always create content resource for text files. + Calculate per extract module timings in TRACKER_DEBUG=statistics. + Add mtime information to graph-specific nfo:FileDataObjects. + Add option to set the D-Bus domain at build time. + Ensure memory is released on inactivity or memory pressure. + Updated translations. - Update to version 2.99.4: + CLI modernization: - Integration with pager. - "tracker3 index" makes persistent configuration changes. - "tracker3 info --eligible $file" tells whether a file would be indexed, or why not. - "tracker3 reset" resets better. - "tracker3 daemon" terminates processes better. - "tracker3 search" fixes. - Erase ^C after monitoring subcommands. - "tracker3 status" shows reports about files that failed indexing/metadata extraction. + Fixes to removable mount handling. + Use curly quotes consistently in setting description strings. + Better use of asserts in tests. + Update seccomp rules to work with modern glib. - Changes from version 2.99.3: + Support musicbrainz tags in gstreamer module. + Support acoustid tag writeback. + Handle nmm:artist and nmm:performer. + DBus API changes. + Fixes for race conditions. + Performance improvements. + Extractor watchdog fixes with domain ontologies. + CLI improvements. + Test fixes. + Use background slice. + Add base tests for CLI. + Better debugging traces. + Fix extraction of files with dummy extractors. - Changes from version 2.99.2: + Constraint the indexed text formats to txt/markdown, a new setting allows handling other formats. + Add rules for game ROM formats. + Support automatic re-extraction on extractor changes. + Vorbis and flac specific extractors were dropped, those are handled by gstreamer. + Improve usage of nie:dataSource, now there is one per indexed folder, no longer used by tracker-extract. + Fixes to album/disc IRI generation. + Writeback handling is rewritten, now performed via an explicit DBus call. + Add support for musicbrainz and acoustid fingerprint. + Set a deadline of 30 seconds for extraction tasks. + Many build, leak and performance fixes. - Changes from version 2.99.1: + Highlighted updates compared to 2.x: - tracker-miner-fs/tracker-extract and tracker-miner-rss data are split into 2 endpoints: . org.freedesktop.Tracker3.Miner.Files . org.freedesktop.Tracker3.Miner.RSS - tracker-miner-fs data is split into different graphs: . tracker:FileSystem . tracker:Audio . tracker:Video . tracker:Documents . tracker:Software - Full split between file and content elements. 1:1, 1:N, M:1 and M:N are allowed combinations of those, they relate to each other through the nie:isStoredAs and nie:interpretedAs properties. - Parallel installable to tracker-miners 2.x - Better, more tests - Reincorporated libtracker-miner and libtracker-control code. These are no longer for public consumption + Updated translations. - Drop tracker-miners-bsc1165635-crawl-timestamp.patch: no longer applicable. - Add asciidoc and pkgconfig(libnm) BuildRequires: new dependencies. - Replace pkgconfig(tracker-sparql-2.0) BuildRequires with pkgconfig(tracker-sparql-3.0): Follow the switch to Tracker 3. - Drop no longer needed BuildRequires (due to reorganisation): pkgconfig(flac), pkgconfig)vorbisfile), pkgconfig(tracker-miner-2.0) ==== tracker2 ==== Version update (2.3.5 -> 2.3.6) Subpackages: libtracker-common-2_0 libtracker-control-2_0-0 libtracker-miner-2_0-0 libtracker-sparql-2_0-0 typelib-1_0-Tracker-2_0 typelib-1_0-TrackerControl-2_0 - Update to version 2.3.6: + Do not autostart tracker-store. + Updated translations. - Rename to tracker2: compatibility package while the world moves to Tracker 3. - Provide/Obsolete tracker and tracker-lang from the main package, and tracker-devel from tracker2-devel. ==== vim ==== Version update (8.2.1551 -> 8.2.1719) Subpackages: gvim vim-data vim-data-common - Updated to version 8.2.1719, fixes the following problems * Vim9: error for argument type does not mention the number. * Warnings from asan with clang-11. (James McCoy) * Crash in edit test. * Crash in normal test. * Not all tests are executed on Github Actions. * Cursorline highlighting always overrules sign highlighting. * Crash in :vimgrep when started as "vim -n". (Raul Segura) * Signs test fails. * s390x tests work again. * Using NULL pointers in some code. (James McCoy) * Using NULL pointers in fold code. * Vim9: error when using "%" where a buffer is expected. * Vim9: error when using '%" with setbufvar() or getbufvar(). * A few remaining errors from ubsan. * Spellfile test sometimes fails. * Not all Bazel files are recognized. * No example to use ubsan with clang. * prop_find() skips properties in the same line if "skipstart" is used. * Vim9: fixes for functions not tested; failure in getchangelist(). * Configure check for dirfd() does not work on HPUX. (Michael Osipov) * Vim9: count() third argument cannot be "true". * Vim9: expand() does not take "true" as argument. * Vim9: getreg() does not take "true" as argument. * Vim9: glob() doesnot take "true" as argument. * Vim9: globpath() doesnot take "true" as argument. * Vim9: index() does not take "true" as argument. * Vim9: hasmapto(), mapcheck() and maparg() do not take "true" as argument. * Vim9: popup_clear() does not take "true" as argument. * Reports from asan are not optimal. * Wildmenu does not work properly. * Using line() for global popup window doesn't work. * The channel log does not show typed text. * Vim9: cannot use "true" for "skipstart" in prop_find(). * Messages in globals.h not translated, xgettext on MS-Windows not fully supported. * :resize command not fully tested. * Loop for handling keys for the command line is too long. * Cannot read back the prompt of a prompt buffer. * Term_start() options for size are overruled by 'termwinsize'. (Sergey Vlasov) * Vim9: bufnr() doesn't take "true" argument. * Using winheight('.') in tests works but is wrong. * Vim9: passing "true" to char2nr() fails. * Tests do not check the error number properly.0 * Pull requests on github do not notify a maintainer. * Cannot easily see what Vim sends to the terminal. * Using win_screenpos('.') in tests works but is wrong. * The channel source file is too big. * Starting a hidden terminal resizes the current window. * Missing line end when skipping a long line with :cgetfile. * Vim9: cannot use "true" with deepcopy(). * Vim9: cannot use 'true" with garbagecollect(). * Vim9: cannot use 'true" with getbufinfo(). * Vim9: cannot use "true" with getchar(). * Vim9: cannot use "true" with getcompletion(). * Vim9: cannot use "true" with has(). * Vim9: getchar() test fails with GUI. * Vim9: test fails when build without +channel. * Vim9: cannot pass "true" to list2str() and str2list(). * Vim9: cannot pass "true" to nr2char(). * Vim9: cannot pass "true" to prop_remove(). * Vim9: cannot pass "true" to prop_type_add(). * Vim9: cannot pass "true" to searchcount(). * Vim9: cannot pass "true" to searchdecl(). * Vim9: cannot pass "true" to synID(). * Vim9: cannot pass "true" to win_splitmove(). * Vim9: cannot pass "true" to setloclist(). * Vim9: cannot pass "true" to spellsuggest(). * searchcount() test fails. * Crash when using submatch(0, 1) in substitute(). * Loop to handle keys for the command line is too long. * Vim9: using :call where it is not needed. * Vim9: cannot pass "true" to split(), str2nr() and strchars(). * Compiler warning for use of fptr_T. * Test for strchars() fails with different error number. * Vim9: cannot pass "true" to submatch(), term_gettty() and term_start() * Vim9: cannot pass "true" to timer_paused(). * Test fails without terminal feature. * Terminal test fails. * test_fails() does not check the context of the line number. * Not checking the context of test_fails(). * Some error messages are internal but do not use iemsg(). * Loop to handle keys for the command line is too long. * No digraph for 0x2022 BULLET. * Get stuck if a popup filter causes an error. * Vim9: :put ={expr} does not work inside :def function. * Leaking memory when popup filter function can't be called. * Options window cannot be translated. * Amiga: missing header for getgrgid(). * Vim9: cannot use 0 or 1 where a bool is expected. * Otions test fails. * Vim9: :defcompile compiles dead functions. * Vim9: cannot assign 1 and 0 to bool at script level. * GTK3: icons become broken images when resized. * Vim9: result of expression with && and || cannot be assigned to a bool variable. * Amiga: no common build file for Amiga (-like) systems. * GTK3: using old file chooser. * Vim9: result of && and || expression cannot be assigned to a bool at the script level. * Spellfile code not completely tested. * Cannot translate lines in the options window. * Expand('<stack>') does not include the final line number. * When job writes to hidden buffer current window has display errors. (Johnny McArthur) * Cannot build with Strawberry Perl 5.32.0. * Vim9: callstack wrong if :def function calls :def function. * Vim9: no proper error for nested ":def!". * Expand('<stack>') has trailing "..". * Spellfile code not completely tested. * Assert functions require passing expected result as the first argument, which isn't obvious. * Cannot connect to 127.0.0.1 for host with only IPv6 addresses. * :mksession does not restore shared terminal buffer properly. * Options window entries cannot be translated. * Memory leak when using :mkview with a terminal buffer. * Cannot do fuzzy string matching. * The initial value of 'backupskip' can have duplicate items. * Local function name cannot shadow a global function name. * Vim9: not accepting 0 or 1 as bool when type is any. * Vim9: memory leak when storing a value fails. * A couple of gcc compiler warnings. * Vim9: stray error for missing white space. * v_lock is used when it is not initialized. (Yegappan Lakshmanan) * complete_info() selected index has an invalid value. (Ben Jackson) * Vim9: internal error when using variable that was not set. * MinGW: testdir makefile deletes non-existing file. * Compiler warnings for function typecast. * Memory access errors when calling setloclist() in an autocommand. * Crash when using ":set" after ":ownsyntax". (Dhiraj Mishra) * Vim9: ":*" is not recognized as a range. * Vim9: line number for compare error is wrong. * Vim9: unnessary :call commands in tests. * Vim9: const works in an unexpected way. * Vim9: assignment test fails. * "gF" does not use line number after file in Visual mode. * Vim9: cannot declare a constant value. * Vim9: "const!" not sufficiently tested. * Vim9: out of bounds error. * Increment/decrement removes text property. * 'colorcolumn' doesn't show in indent. * Text properties not adjusted for "I" in Visual block mode. * Vim9: list<any> is not accepted where list<number> is expected. * Build fails because TTFLAG_STATIC is missing. * "hi def" does not work for cleared highlight. * Compiler warning for loss if data. * Vim9: crash when using varargs type "any". * Unused (duplicate) macros. * Inconsistent capitalization of error messages. * Cannot lock a variable in legacy Vim script like in Vim9. * Build failure due to missing error message. * Vim9: try/catch causes wrong value to be returned. * Vim9: sort("i") does not work. * Crash when using undo after deleting folded lines. * ":highlight clear" does not restore default link. * Vim9: crash in for loop when autoload script has an error. * "verbose hi Name" reports incorrect info after ":hi clear". * Vim9: crash after running into the "Multiple closures" error. * Small inconsitency in highlight test. * Vim9: error message for function has unpritable characters. * Vim9: memory leak when using multiple closures. * Vim9: list of list type can be wrong. * Vim9: leaking memory when using partial. * Vim9: leaking memory when calling a lambda. * Motif GUI: crash when setting menu colors. (Andrzej Bylicki) * Text properties corrupted with substitute command. (Filipe Brandenburger) * Motif GUI: commented out code missed {}. * Options window has duplicate translations. * Vim9: :def function disallows "firstline" and "lastline" argument names for no good reason. ==== webkit2gtk3 ==== Version update (2.28.4 -> 2.30.0) Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 libwebkit2gtk3-lang typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles - Update to version 2.30.0: + Fix NTLM authentication. + Don't try to use SHM on wayland with older wpebackend-fdo. + Fix the build due to seccomp.h header not found. - Drop seccomp-build-fix.patch and wpe-shm-check.patch: fixed upstream. - Add wpe-shm-check.patch: make SHM initialization fail for wpebackend-fdo < 1.7.0. - Add seccomp-build-fix.patch: pass seccomp include directory to g++. - Re-enable bubblewrap sandbox for SLE-15-SP2 and Tumbleweed. - Update to version 2.29.92: + Fix user agent header after a redirect when a new quirk is required. + Stop using firefox user agent quirk for google docs. + Fix rendering frames timeline panel in web inspector. + Fix per-thread cpu usage in web inspector. + Fix several crashes and rendering issues. - Changes from version 2.29.91: + Fix a web process crash introduced in 2.29.90. - Changes from version 2.29.90: + Fix font variation settings when font smoothing setting is also present. + Fix HTML drag and drop operations. + Fix argument order for clone syscall seccomp filter on s390x. + Fix a crash when selecting text. + Fix several crashes and rendering issues. - Changes from version 2.29.4: + Add support for backdrop filters. + Add support for text-underline-offset and text-decoration-thickness. + Add OpenCDM and AV1 support to media backend. + Add new API to get ITP data summary. + Use mobile user-agent on tablets. + Fix several crashes and rendering issues. - Changes from version 2.29.3: + Add webkit_authentication_request_get_security_origin. + Change the cookies accept policy to always when no-third-party is set and ITP is enabled. + Fix web process hangs on large GitHub pages. + Bubblewrap sandbox should not attempt to bind empty paths. + Add support for sndio to bubblewrap sandbox. + Also handle dark themes when the name ends with -Dark. + Fix a race condition causing a crash in media player. + Fix several crashes and rendering issues. - Changes from version 2.29.2: + Add Intelligent Tracking Prevention (ITP) support. + Add support for video formats in img elements. + Add API to handle video autoplay policy that now defaults to disallow autoplay videos with audio. + Add API to mute a web view. + Add API to allow applications to handle the HTTP authentication credential storage. + Add a WebKitSetting to set the media content types requiring hardware support. + Fix a crash during drag an drop due to a bug introduced in 2.29.1. + Do not start page load during animation in back/forward gesture. + Fix several crashes and rendering issues. - Changes from version 2.29.1: + Stop using GTK theming to render form controls. + Add API to disable GTK theming for scrollbars too. + Fix several race conditions and threading issues in the media player. + Add USER_AGENT_BRANDING build option. + Add paste as plain text option to the context menu for rich editable content. + Fix several crashes and rendering issues. + Updated translations. - Rebase webkit2gtk3-fdo-soname.patch. - Add pkgconfig(libsystemd) BuildRequires: new dependency. ==== wpa_supplicant ==== Subpackages: wpa_supplicant-gui - Fix spec file for SLE12, use make %{?_smp_mflags} instead of %make_build - Enable SAE support(jsc#SLE-14992). ==== xen ==== Version update (4.14.0_06 -> 4.14.0_08) Subpackages: xen-libs xen-tools xen-tools-domU - bsc#1176339 - VUL-0: CVE-2020-25602: xen: x86 pv: Crash when handling guest access to MSR_MISC_ENABLE (XSA-333) 5f6a05a0-pv-Handle-the-Intel-specific-MSR_MISC_ENABLE-correctly.patch - bsc#1176341 - VUL-0: CVE-2020-25598: xen: Missing unlock in XENMEM_acquire_resource error path (XSA-334) 5f6a05b7-xen-memory-Dont-skip-the-RCU-unlock-path-in-acquire_resource.patch - bsc#1176343 - VUL-0: CVE-2020-25604: xen: race when migrating timers between x86 HVM vCPU-s (XSA-336) 5f6a05dd-vpt-fix-race-when-migrating-timers-between-vCPUs.patch - bsc#1176344 - VUL-0: CVE-2020-25595: xen: PCI passthrough code reading back hardware registers (XSA-337) 5f6a05fa-msi-get-rid-of-read_msi_msg.patch 5f6a061a-MSI-X-restrict-reading-of-table-PBA-bases-from-BARs.patch - bsc#1176346 - VUL-0: CVE-2020-25597: xen: once valid event channels may not turn invalid (XSA-338) 5f6a062c-evtchn-relax-port_is_valid.patch - bsc#1176345 - VUL-0: CVE-2020-25596: xen: x86 pv guest kernel DoS via SYSENTER (XSA-339) 5f6a065c-pv-Avoid-double-exception-injection.patch - bsc#1176347 - VUL-0: CVE-2020-25603: xen: Missing barrier barriers when accessing/allocating an event channel (XSA-340) 5f6a0674-xen-evtchn-Add-missing-barriers-when-accessing-allocating-an-event-channel.patch - bsc#1176348 - VUL-0: CVE-2020-25600: xen: out of bounds event channels available to 32-bit x86 domains (XSA-342) 5f6a068e-evtchn-x86-enforce-correct-upper-limit-for-32-bit-guests.patch - bsc#1176349 - VUL-0: CVE-2020-25599: xen: races with evtchn_reset() (XSA-343) 5f6a06be-evtchn-evtchn_reset-shouldnt-succeed-with-still-open-ports.patch 5f6a06e0-evtchn-convert-per-channel-lock-to-be-IRQ-safe.patch 5f6a06f2-evtchn-address-races-with-evtchn_reset.patch - bsc#1176350 - VUL-0: CVE-2020-25601: xen: lack of preemption in evtchn_reset() / evtchn_destroy() (XSA-344) 5f6a071f-evtchn-arrange-for-preemption-in-evtchn_destroy.patch 5f6a0754-evtchn-arrange-for-preemption-in-evtchn_reset.patch - Upstream bug fix (bsc#1027519) 5f5b6951-x86-PV-64bit-segbase-consistency.patch - Fix problems in xen.spec with building on aarch64 - Make use of %service_del_postun_without_restart while preserving the old behavior for older distros. - In %post tools, remove unnecessary qemu symlinks. - Fix error in xen-tools %post when linking pvgrub64.bin - Make paths below libexec more explicit - Create symlink also for pvgrub32.bin ==== yast2 ==== Version update (4.3.27 -> 4.3.29) Subpackages: yast2-logs - Added "--plain" and "--full" options for the "systemctl" calls, these are recommended when processing the output by scripts (bsc#1176714) - 4.3.29 - Decrease error logging to avoid false positives in the y2log (bsc#1176653) - 4.3.28 ==== yast2-firstboot ==== Version update (4.3.4 -> 4.3.5) - add test field to language & keyboard module (bsc#1174856) - 4.3.5 ==== yast2-network ==== Version update (4.3.20 -> 4.3.22) - Fixed false error in the y2log (bsc#1176653) - 4.3.22 - Fix connection hostname initialization (bsc#1175579) - 4.3.21 ==== yast2-packager ==== Version update (4.3.7 -> 4.3.8) - Fixed WFM.Args call to not produce an error message in the y2log (bsc#1176653) - 4.3.8 ==== yast2-ruby-bindings ==== Version update (4.3.2 -> 4.3.4) - Fixes for gensalt handling with libxcrypt (bsc#1176924) - 4.3.4 - Improve logger to log also method name in ruby (useful for any debug like bsc#1144351) - 4.3.3 ==== zimg ==== Version update (2.9.3 -> 3.0.1) - update to 3.0.1: * graph: fix handling of default nominal_peak_luminance (introduced in 3.0) - Update to version 3.0 (API 2.4): * api: support alpha channel as the fourth plane * colorspace: accept UNSPECIFIED transfer characteristics in more situations * colorspace: fix conversion from ICtCp to ARIB STD-B67 * depth: fix out of bounds access in SSE2 ordered dither * graph: rewrite for alpha channel support * resize: fix incorrect rounding when calculating pixel coordinates * resize: AVX-512 VNNI code paths * arm: NEON/ASIMD code paths - Drop patches: * update-matrix3.cpp.patch * colorspace-fix-assertion.patch * colorspace-fix-assertion-part2.patch ==== zypper ==== Version update (1.14.38 -> 1.14.39) Subpackages: zypper-log zypper-needs-restarting - Use new testcase API in libzypp. - BuildRequires: libzypp-devel >= 17.25.0. - help: prevent 'whatis' from writing to stderr (bsc#1176712) - wp: point out that command is aliased to a search command and searches case-insensitive (jsc#SLE-16271) - version 1.14.39 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed - Review of the week 2020/39
by Dominique Leuenberger / DimStar 25 Sep '20

25 Sep '20

Dear Tumbleweed users and hackers, During this week we have released ‘only’ three Snapshot (0919, 0922 and 0923). But some of you might have noticed that we are finally sending the ‘build fail notification mails’ again, helping you be more laid back, not having to look at your packages all the time, as the bot does that for you. Unfortunately, due to some OBS issue, this feature was broken for a little while. The 3 snapshots we published contained these updates for you: * KDE Frameworks 5.74.0 * Mesa 20.1.8 * firewalld 0.9.0 * Linux kernel 5.8.10 * Perl 5.30.3 Not as much change as in previous weeks and the list of staged changes is thus largely unchanged. Currently there are: * GNOME 3.36.6 * openssl 1.1.1h * openssh packaging layout change: ‘openssh’ will be a meta package, pulling in openssh-server and openssh-clients. This will allow for fainer grained installation/removal of the server part where needed * KDE Plasma 5.20 (currently beta being tested) * glibc 2.32 * binutils 2.35 * gettext 0.21 * bison 3.7.1 * SELinux 3.1 * openssl 3.0 Cheers, Dominique

1 0