February 2017 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Problem with OBS and VirtualBox
by Larry Finger 27 Feb '17

27 Feb '17

In bsc #1024671, it is reported that a new installation of Leap 42.2 cannot run VirtualBox. I have confirmed the report. An installation + update results in kernel 4.4.49; however, the host kmp for VB is for kernel 4.4.36. Something is keeping the VB update from running so that the modules match the new kernel. The only thing I see is that when I try to issue a new "mr" for home:lwfinger:branches:openSUSE:Leap:42.2:Update, it fails as follows: finger@linux-4v1g:~/home:lwfinger:branches:openSUSE:Leap:42.2:Update/virtualbox> osc mr -m "Handle 3D acceleration as reported in bsc #1024934" Using target project 'openSUSE:Maintenance' Server returned an error: HTTP Error 400: Bad Request The source of package home:lwfinger:branches:openSUSE:Leap:42.2:Update/sparse is broken I do not see why home:.../virtualbox should have anything to do with home:.../sparse. What do I need to do? Larry -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

Re: [opensuse-factory] Trying to submit a bugfix for Thunar for openSUSE Leap 42.2
by Stefan Seyfried 27 Feb '17

27 Feb '17

Hi Ronny Am 27.02.2017 um 21:22 schrieb Ronny Peine: > Hello Stefan, > > thanks for your feedback. It would be nice to see you on bnc-team-xfce. > I think Takashi is mostly overworked by kernelpatching :) > But I could try to help fix as much bugs as possible in the XFCE area. This would certainly be welcome. > I'm still new to OBS but I slowly get the hang of it. > If you have any current documents for the Leap Maintenance workflow, it > could help me to do most of the work and reduce the work for the > maintainer(s). To be honest, I first need to look up what needs to be done to get the maintenance update into 42.1 (it will be needed there, too, as the Thunar version is the same in 42.1, 42.2 and Tumbleweed). That's why I have submitted (and self-accepted) your fix into X11:xfce first, then (after an additional one-liner comment fix to the spec file) forwarded it to Factory. I know how to do that. Maintenance for released distributions, I need to look up :-P But we'll get this fix out. About the OBS workflow: if you find that the version in X11:xfce is not newer than in Leap, then just submit your fixes to X11:xfce (still open a bugzilla, because the bugzilla id is needed for a maintenance update) and we'll forward it from there. Fortunately, due to the slow pace of XFCE development, many packages in X11:xfce are still not (much) newer than the Leap released ones. So the workflow would be: "osc bco X11:xfce package", then fix it in your home:branch repo, then submit back to X11:xfce. -- Stefan Seyfried "For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." -- Richard Feynman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Trying to submit a bugfix for Thunar for openSUSE Leap 42.2
by Ronny Peine 27 Feb '17

27 Feb '17

Hello, I wanted to ask you if and how I can submit a bugfix to Thunar for openSUSE Leap 42.2. I created a branch package in OBS and integrated the patch thunar-bugfixes.patch into the Thunar package to especially fix bug #1011518. Some other small fixes are integrated, too, which don't change behaviour (except crashes:)), translations or look and feel. You can see my branch package on https://build.opensuse.org/package/show/home:ronnypeine:branches:openSUSE:L… I tried to attach the information to the bugreport but as it seems no one seems to react from the assignee bnc-team-xfce. All bugreports with this assignee are unanswered. So, I think that this assignee is dormant or some technical problem leads to missing notifications for this assignee. I therefor changed the assignee for bug #1011518 to lnussel but got no answer, too. It seems that none of the XFCE maintainers from X11:XFCE are working on it. Following people I could find on this project: Guido Berhoerster (gberh) Stefan Seyfried (seife) Takashi Iwai (tiwai) Is anyone of these people still working on XFCE, maintaining it and/or working on bugs for Leap? PS: I'm not subscribed to the mailinglist. So, please CC me in your replies. Thanks for your attention. Kind regards, Ronny -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New Tumbleweed snapshot 20170226 released!
by Dominique Leuenberger 27 Feb '17

27 Feb '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: SDL2 accountsservice akonadi-server apache2 arabic-fonts autogen cairo curl (7.52.1 -> 7.53.1) dracut flatpak (0.8.2 -> 0.8.3) git (2.11.1 -> 2.12.0) gtk-vnc (0.6.0 -> 0.7.0) gucharmap icewm kernel-firmware (20170217 -> 20170223) kexec-tools libisofs llvm3_9 man speex (1.2~rc2 -> 1.2) usb_modeswitch xf86-input-libinput (0.23.0 -> 0.24.0) === Details === ==== SDL2 ==== - Add dbus-ime.diff and build with fcitx [boo#1025413] ==== accountsservice ==== Subpackages: libaccountsservice0 typelib-1_0-AccountsService-1_0 - Rebase accountsservice-933083-load-root-setting.patch. ==== akonadi-server ==== Subpackages: akonadi-server-sqlite libKF5AkonadiAgentBase5 libKF5AkonadiCore5 libKF5AkonadiPrivate5 libKF5AkonadiWidgets5 libKF5AkonadiXml5 - Add fix-itemretriever-in-case-of-concurrent-requests.patch * Fix hangs accessing folders ("Retrieving folder contents" going on infinitely) ==== apache2 ==== Subpackages: apache2-devel apache2-doc apache2-example-pages apache2-prefork apache2-utils - revert an attempt to fix PR 60458 + httpd-cache-revert-svn1773397.patch ==== arabic-fonts ==== Subpackages: arabic-ae-fonts arabic-bitmap-fonts arabic-kacst-fonts arabic-kacstone-fonts arabic-naqsh-fonts - Update amiri subpackage to 0.109 * New glyphs: * A new stylistic set (ss06) to avoid automatically adding ??? above ???. * A localised &. * U+1EEF0 ARABIC MATHEMATICAL OPERATOR MEEM WITH HAH WITH TATWEEL (?). * U+1EEF1 ARABIC MATHEMATICAL OPERATOR HAH WITH DAL (?). * Adding missing forms of U+06C2. - updated to 0.108 * New glyphs: - New design of ? in <200d>?? combination. - Alternate numbers for use in fractions, accessible with the OpenType features `numr` and `dnom`. - The new Arabic Extended-A vowel marks, in the range U+08E4?08FE. - Redesign the U+06C1 forms to make it distinctive from U+06BE. - Add ??? ????? symbol, U+FDFB. * Fixes: - No longer replace two successive *fatha*, *damma* or *kasra* with a sequential *tanween* form, the characters U+08F0, U+08F1 and U+08F2 should be used instead. - Many kerning improvements. - Workaround a bug in Core Text (Mac OS X text layout engine) that break the ??? ligature. - All forms of U+06BA are now dotless, per Unicode standard. - Initial and medial forms of U+063E, U+063F, U+077A and U+077B were missing. - The dots in initial and medial forms of U+06BD should be inverted. * New fonts: - A coloured version of the Amiri Quran font that gives the vowels and Quranic annotation marks distinctive colours. This font uses the new `COLR`/`CPAL` font tables which are currently supported only by Firefox (all platforms) and MS Internet Explorer/Edge (Windows 8.1 and above). - The webfonts now include WOFF 2.0 files as well. ==== autogen ==== Subpackages: libopts-devel libopts25 - Add autogen-catch-race-error.patch (boo#1021353) ==== cairo ==== Subpackages: cairo-devel libcairo-gobject2 libcairo-script-interpreter2 libcairo2 libcairo2-32bit - Add cairo-pdf-fixes.patch: Three minor pdf fixes from upstream git (fdo#99630). ==== curl ==== Version update (7.52.1 -> 7.53.1) Subpackages: libcurl-devel libcurl4 - Update to 7.53.1 Bugfixes: * url: Improve CURLOPT_PROXY_CAPATH error handling * urldata: include curl_sspi.h when Windows SSPI is enabled * formdata: check for EOF when reading from stdin * tests: Set CHARSET & LANG to UTF-8 in 1035, 2046 and 2047 * url: Default the proxy CA bundle location to CURL_CA_BUNDLE * rand: added missing #ifdef HAVE_FCNTL_H around fcntl.h header - Update to 7.53.0 Changes: * unix_socket: added --abstract-unix-socket and CURLOPT_ABSTRACT_UNIX_SOCKET * CURLOPT_BUFFERSIZE: support enlarging receive buffer Bugfixes: * CVE-2017-2629: make SSL_VERIFYSTATUS work again * gnutls-random: check return code for failed random * openssl-random: check return code when asking for random * http: remove "Curl_http_done: called premature" message * cyassl: use time_t instead of long for timeout * build-wolfssl: Sync config with wolfSSL 3.10 * ftp-gss: check for init before use * configure: accept --with-libidn2 instead * ftp: failure to resolve proxy should return that error code * curl.1: add three more exit codes * docs/ciphers: link to our own new page about ciphers * vtls: s/SSLEAY/OPENSSL - fixes multi_socket timeouts with openssl * darwinssl: fix iOS build * darwinssl: fix CFArrayRef leak * cmake: use crypt32.lib when building with OpenSSL on windows * curl_formadd.3: CURLFORM_CONTENTSLENGTH not needed when chunked * digest_sspi: copy terminating NUL as well * curl: fix --remote-time incorrect times on Windows * curl.1: several updates and corrections * content_encoding: change return code on a failure * curl.h: CURLE_FUNCTION_NOT_FOUND is no longer in use * docs: TCP_KEEPALIVE start and interval default to 60 * darwinssl: --insecure overrides --cacert if both settings are in use * TheArtOfHttpScripting: grammar * CIPHERS.md: document GSKit ciphers * wolfssl: support setting cipher list * wolfssl: display negotiated SSL version and cipher * lib506: fix build for Open Watcom * asiohiper: improved socket handling * examples: make the C++ examples follow our code style too * tests/sws: retry send() on EWOULDBLOCK * cmake: Fix passing _WINSOCKAPI_ macro to compiler * smtp: Fix STARTTLS denied error message * imap/pop3: don't print response character in STARTTLS denied messages * rand: make it work without TLS backing * url: fix parsing for when 'file' is the default protocol * url: allow file://X:/path URLs on windows again * gnutls: check for alpn and ocsp in configure * IDN: Use TR46 'non-transitional' for toASCII translations * url: Fix NO_PROXY env var to work properly with --proxy option * CURLOPT_PREQUOTE.3: takes a struct curl_slist*, not a char* * docs: Add note about libcurl copying strings to CURLOPT_* manpages * curl: reset the easy handle at --next * --next docs: --trace and --trace-ascii are also global * --write-out docs: 'time_total' is not always shown with ms precision * http: print correct HTTP string in verbose output when using HTTP/2 * docs: improved language in README.md HISTORY.md CONTRIBUTE.md * http2: disable server push if not requested * nss: use the correct lock in nss_find_slot_by_name() * usercertinmem.c: improve the short description * CURLOPT_CONNECT_TO: Fix compile warnings * docs: non-blocking SSL handshake is now supported with NSS * *.rc: escape non-ASCII/non-UTF-8 character for clarity * mbedTLS: fix multi interface non-blocking handshake * PolarSSL: fix multi interface non-blocking handshake * VC: remove the makefile.vc6 build infra * telnet: fix windows compiler warnings * cookies: do not assume a valid domain has a dot * polarssl: fix hangs * gnutls: disable TLS session tickets * mbedtls: disable TLS session tickets * mbedtls: implement CTR-DRBG and HAVEGE random generators * openssl: Don't use certificate after transferring ownership * cmake: Support curl --xattr when built with cmake * OS400: Fix symbols * docs: Add more HTTPS proxy documentation * docs: use more HTTPS links * cmdline-opts: Fixed build and test in out of source tree builds * CHANGES.0: removed * schannel: Remove incorrect SNI disabled message * darwinssl: Avoid parsing certificates when not in verbose mode * test552: Fix typos * telnet: Fix typos * transfer: only retry nobody-requests for HTTP * http2: reset push header counter fixes crash * nss: make FTPS work with --proxytunnel * test1139: Added the --manual keyword since the manual is required * polarssl, mbedtls: Fix detection of pending data * http_proxy: Fix tiny memory leak upon edge case connecting to proxy * URL: only accept ";options" in SMTP/POP3/IMAP URL schemes * curl.1: ftp.sunet.se is no longer an FTP mirror * tool_operate: Show HTTPS-Proxy options on CURLE_SSL_CACERT * http2: fix memory-leak when denying push streams * configure: Allow disabling pthreads, fall back on Win32 threads * curl: fix typo in time condition warning message * axtls: adapt to API changes * tool_urlglob: Allow a glob range with the same start and stop * winbuild: add note on auto-detection of MACHINE in Makefile.vc * http: fix missing 'Content-Length: 0' while negotiating auth * proxy: fix hostname resolution and IDN conversion * docs: fix timeout handling in multi-uv example * digest_sspi: Fix nonce-count generation in HTTP digest * sftp: improved checks for create dir failures * smb: use getpid replacement for windows UWP builds * digest_sspi: Handle 'stale=TRUE' directive in HTTP digest - Remove curl-7.52.1-idn-fixes.patch, fixed upstream. ==== dracut ==== - 90multipath: 90multipath: start before local-fs-pre.target (bsc#1005410, bsc#1006118, bsc#1007925) * add 0508-90multipath-start-before-local-fs-pre.target.patch - unlimit TaskMax for xfs_repair in emergency shell (bsc#1019938) * add 0507-Set-TaskMax-inifinite-for-the-emergency-shell.patch - Boot on s390x with fips=1 on the kernel commnad line (bnc#1021687) * add 0506-Boot-on-s390x-with-fips-1-on-the-kernel-commnad-line.patch ==== flatpak ==== Version update (0.8.2 -> 0.8.3) - Update to version 0.8.3: + In addition to the regular list of bugfixes this stable release include backports of the updated OpenGL support from master. This, in combination with the work in the runtime allows flatpak to work out of the box with out-of-tree OpenGL drivers, including the nvidia driver. + Additionally, due to some complicated issues wrt ptrace and user namespaces this version disables the use of user namespaces if bubblewrap is setuid, as it cause problems for the way flatpak portals identifies applications. + Better handling of errors for extra-data. + Handle extra-data properly for runtimes (as well as apps). + Respect required version for runtimes (as well as apps). + flatpak list: Don't break if some local ref is not deployed. + builder: - Look for appstream data in /app/share/metadata also. - Fix buildsystem=cmake builds. + Add progress reporting to extra-data download. + Fix uid/gid for directories in document portal. + Updated translations. ==== git ==== Version update (2.11.1 -> 2.12.0) Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk - git 2.12.0: * Use of an empty string that is used for 'everything matches' is still warned and Git asks users to use a more explicit '.' for that instead. The hope is that existing users will not mind this change, and eventually the warning can be turned into a hard error, upgrading the deprecation into removal of this (mis)feature. That is not scheduled to happen in the upcoming release (yet). * The historical argument order "git merge <msg> HEAD <commit>..." has been deprecated for quite some time, and will be removed in a future release. * An ancient script "git relink" has been removed. ==== gtk-vnc ==== Version update (0.6.0 -> 0.7.0) Subpackages: gtk-vnc-lang libgtk-vnc-2_0-0 libgvnc-1_0-0 typelib-1_0-GVnc-1_0 typelib-1_0-GtkVnc-2_0 - Update License to include LGPL-2.1. - Update to version 0.7.0: + CVE-2017-5884 - fix bounds checking for RRE, hextile and copyrect encodings. + CVE-2017-5885 - fix color map index bounds checking. + Add API to allow smooth scaling to be disabled. + Workaround to help SPICE servers quickly drop VNC clients which mistakenly connect, by sending "RFB " signature bytes early. + Don't accept color map entries for true-color pixel formats. + Add missing vala .deps files for gvnc & gvncpulse. + Avoid crash if host/port is NULL. + Add precondition checks to some public APIs. + Fix link to home page in README file. + Fix misc memory leaks. + Clamp cursor hot-pixel to within cursor region. - Update file list for %{name}-devel to include additional files installed by updated version. ==== gucharmap ==== Subpackages: libgucharmap_2_90-7 - Add gucharmap-no-force-light-theme.patch: No longer force light theme variant, patch from upstream git. ==== icewm ==== Subpackages: icewm-config-upstream icewm-default icewm-lite - Ensure a valid mailbox check tool (bsc#1026134) * icewm-mail.patch * https://github.com/bbidulock/icewm/pull/108 ==== kernel-firmware ==== Version update (20170217 -> 20170223) Subpackages: ucode-amd - Update to version 20170223: * amdgpu: add smc firmware for new polaris variants * Revert "amdgpu: update VI smc/mc firmware" * Revert "amdgpu: update VI gfx/sdma firmware" ==== kexec-tools ==== - Do not pull in gcc-PIE, as it breaks the static build in here. ==== libisofs ==== - Use sle_version >= 120300 instead of leap_version >= 420300 (leap_version does not work). - Added new build requirement libjte-devel for Tumbleweed and Leap >= 42.3. ==== llvm3_9 ==== Subpackages: libLLVM3_9 libLLVM3_9-32bit - Enable BPF for all arches bsc#1026191 ==== man ==== - Use _libexecdir instead of _prefix/lib ==== speex ==== Version update (1.2~rc2 -> 1.2) Subpackages: libspeex1 libspeex1-32bit speex-devel - Update to stable 1.2 release ==== usb_modeswitch ==== Subpackages: usb_modeswitch-data - Update usb-modeswitch-data package to version 20170205 * Bugfix release: Removed all catch-all fallback config files as they can affect unrelated devices - fixes (rh#1374913). ==== xf86-input-libinput ==== Version update (0.23.0 -> 0.24.0) - Update to version 0.24.0: + Tablets now support a configurable pressure curve. + Tablets now have a 'area ratio' setting to be able to match the tablet aspect ratio with that of the screen. + The mouse wheel's click angle now (correctly) affects how fast the scroll wheel triggers. In particular, if you have a wheel with a very small click angle, it won't trigger for every click anymore. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] How to substitute libgstreamer-0.10.so.0 to run RStudio?
by Chan Ju Ping 27 Feb '17

27 Feb '17

I realise this is more of an issue for the RStudio developers. In the meantime, I need to write R Markdown with it so I do need RStudio to continue my analysis. How would I resolve the following issue while waiting for the RStudio devs to switch their gstreamer dependency? "rstudio: error while loading shared libraries: libgstreamer-0.10.so.0: cannot open shared object file: No such file or directory "

2 3

[opensuse-factory] Snapper rollback with encrypted installs ( was: YaST: highlights of development sprint 30)
by Robert Munteanu 27 Feb '17

27 Feb '17

Hi, On Sat, Feb 4, 2017 at 12:50 AM, Terzeus S. Dominguez <zeus(a)dmgznet.com> wrote: >> Does that mean that in the future we'll be able to use snapper >> rollback with an encrypted system? This was not working previously >> because /boot was a separate ext4 partitiion. > > Not in the future. Snapper has been working with fully encrypted installs for a while now. Does it require a special partition setup or would it 'just work' with existing ones? I have the following one: UUID=89548d6e-b673-441e-a0d6-7abeba05c07b / btrfs defaults 0 0 UUID=6ac580e2-9c42-40dc-ac59-047f8898a41b /boot ext4 acl,user_xattr 1 2 /dev/system/home /home xfs defaults 1 2 plus loads of other subvolumes. My understanding is that changes done to /boot would not be rolled back. How is this handled now? I am asking since I would not like to experiment with production machines :-) Thanks, Robert -- http://robert.muntea.nu/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 12

[opensuse-factory] 42.3 und stuff from SLE-Modules
by vetter＠physik.uni-wuerzburg.de 27 Feb '17

27 Feb '17

Hi, what is the policy regarding SLE Modules? Is software from the various Modules supposed to be included in 42.3? At least for SLE-Module-HPC12 containing slurm this is not yet the case. It would be great to have it included. Cheers. -- Mit freundlichen Gruessen, Andreas Vetter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] k3b for Tumbleweed
by Patrick Shanahan 27 Feb '17

27 Feb '17

Is packman no longer packaging k3b and related items, k3b-codecs and libspnav0, for Tumbleweed? I see them for Leap 42.1 and 42.2. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Photos: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 Photos: http://wahoo.no-ip.org/piwigo @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

7 12

[opensuse-factory] Introducing the scanmem package to openSUSE:Factory
by Sebastian Parschauer 27 Feb '17

27 Feb '17

Hi, I'd like to introduce the scanmem package from devel:tools to you with the hope to get it included in openSUSE:Factory. === Description === Scanmem is a simple interactive debugging utility for Linux, used to locate the address of a variable in an executing process. This can be used for the analysis or modification of a hostile process on a compromised machine, user-space live-patching, reverse engineering, or as a "pokefinder" to cheat at video games. Since version 0.8, scanmem includes a GUI called GameConqueror. But the devel:tools maintainers decided not to provide it due to security reasons (requires pkexec, contains most bugs). Upstream: https://github.com/scanmem/scanmem Upstream maintainer: Sebastian Parschauer (me) Development model: single maintainer homebrew FOSS License: GPLv3 === Purpose of having the package === To be honest, the tool is mostly used for game cheating. All other distributions already have it. openSUSE is an ideal platform for game cheating due to often no hardening of games and no ptrace() restrictions by default. This is why two other users have packaged it for openSUSE already. It can also help in some tricky L3s, for the work in the security team, or for secure programming. === Maintainability === Maintaining the package without GameConqueror is really easy for me. The scanmem executable uses an absolute path to libscanmem. So the lib is packaged to be located outside of any library search path with /usr/lib(64)/scanmem/. All that is C code. Upstreaming fixes is easy as I'm the upstream maintainer as well. I have a strong passion for homebrew FOSS and game cheating. There are multiple active contributors. So development will move on. We've achieved a lot already since I took over upstream maintenance. Performance is tested by scripting scanmem commands and profiling. It is gradually improved by inlining functions and avoiding slow ptrace() where /proc/$pid/mem can be used. Security is checked by security professionals who review the code and regular Coverity Scan runs. Most bugs are located in the Python 2/3 GTK 3 GUI this way. === Special features === The tool also helps to detect the types of memory regions and to bypass ASLR with its knowledge about the ELF format. It shows the load address of every writable memory region and provides a match offset so that the current load address can be re-added the next target process run. This is used by game trainers with ASLR/PIC/PIE support. The match offsets of the executable match "objdump -D" output of PIE executables. I miss such stuff often with user-space crashes without core dump. If the process is already dead, then a randomized address is quite worthless. ================ Cheers, Sebastian from the L3 team -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] opensuse factory (2017.02.24) want to remove not installed packages.....
by André Verwijs 27 Feb '17

27 Feb '17

with TW i always get this... The following 4 applications are going to be REMOVED: Cuttlefish Desktop "Grouping Plasmoid" "System Tray" but packages are not installed... ______________________________________________________________________________ My Twitter Page: http://twitter.com/OpenSimFan My Facebook page (be my friend, please ) http://www.facebook.com/andre.verwijs My Google+ page (follow me please ) André Verwijs - Google+ https://plus.google.com/111310545842863442992 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 15