December 2017 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Kmail, also after latest update "Email Sending failed"
by constant＠indo.net.id 30 Dec '17

30 Dec '17

Update 20171228 did not bring any improvement for my ailing Kmail. Have followed the correspondence about the "failed to transport message. Even tried my hand on the debug proposition but failed somewhere along the route. Suspected that due to the long use of my Kmail some irregularties must heve krept in my kmail setup I set a new kmail up from zero in an new user to no avail. The only difference between my old long used setup and the fresh setup was the message "Failed to Transport Message.2 and Failed transport Message, service error" (my old setup) into "Failed to Transport Message.6" Is thee a chance to have a functioning Kmail still this year ? ;) -- opensuse:tumbleweed:20171228 Qt: 5.10.0 KDE Frameworks: 5.40.0 kf5-config: 1.0 KDE Plasma: 5.11.4 plasmashell 5.11.4 Kernel: 4.14.8-1-default Linux User 183145 working on a Pentium IV . -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] New Tumbleweed snapshot 20171228 released!
by Dominique Leuenberger 29 Dec '17

29 Dec '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: lame (3.99.5 -> 3.100) libraw (0.18.5 -> 0.18.6) tbb (2018_U2 -> 2018_20171205) wicked === Details === ==== lame ==== Version update (3.99.5 -> 3.100) Subpackages: libmp3lame0 - Update to version 3.100 * Improved detection of MPEG audio data in RIFF WAVE files. sf#3545112 Invalid sampling detection * New switch --gain <decibel>, range -20.0 to +12.0, a more convenient way to apply Gain adjustment in decibels, than the use of --scale <factor>. * Fix for sf#3558466 Bug in path handling * Fix for sf#3567844 problem with Tag genre * Fix for sf#3565659 no progress indication with pipe input * Fix for sf#3544957 scale (empty) silent encode without warning * Fix for sf#3580176 environment variable LAMEOPT doesn't work anymore * Fix for sf#3608583 input file name displayed with wrong character encoding (on windows console with CP_UTF8) * Fix dereference NULL and Buffer not NULL terminated issues. * Fix dereference of a null pointer possible in loop. * Make sure functions with SSE instructions maintain their own properly aligned stack. Thanks to Fabian Greffrath * Multiple Stack and Heap Corruptions from Malicious File. * Fix a division by zero vulnerability. * Fix CVE-2017-9410 fill_buffer_resample function in libmp3lame/util.c heap-based buffer over-read and ap * Fix CVE-2017-9411 fill_buffer_resample function in libmp3lame/util.c invalid memory read and application crash * Fix CVE-2017-9412 unpack_read_samples function in frontend/get_audio.c invalid memory read and application crash * Fix clip detect scale suggestion unaware of scale input value * HIP decoder bug fixed: decoding mixed blocks of lower sample frequency Layer3 data resulted in internal buffer overflow. * Add lame_encode_buffer_interleaved_int() - Drop upstream patches: * lame-Add-check-for-invalid-input-sample-rate.patch * lame-ansi2knr2.patch * lame-bits_per_sample.patch * lame-force_align_arg_pointer.patch * lame-gtk1.patch * lame-int_resample_ratio.patch * lame-msse.patch ==== libraw ==== Version update (0.18.5 -> 0.18.6) Subpackages: libraw-devel libraw16 - updated to 0.18.6: * Fixed fuji_width handling if file is neither fuji nor DNG * Fixed xtrans interpolate for broken xtrans pattern * Fixed panasonic decoder ==== tbb ==== Version update (2018_U2 -> 2018_20171205) - Add disable-irml.patch to disable linking to libirml - Actually update to tarball to 2018_U2 release ==== wicked ==== Subpackages: libwicked-0-6 wicked-service - wickedd: clear master references on slaves when a master gets deleted and the deletion event arrives before unenslave event to avoid a bridge reenslave failure on restart (bsc#1061051). [+ 0001-wickedd-explicitly-unbind-slaves-on-deletion.patch] -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed snapshot 20171223
by Larry Finger 29 Dec '17

29 Dec '17

Dominique, I am quite happy to see the libQt5* packages reach version 5.10. Now I will be able to test VirtualBox 5.2.4 and submit it to Factory. Larry -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Error message during TW dup
by Ken Schneider - Factory 29 Dec '17

29 Dec '17

At the end of running 'zypper -vv dup' for TW (openSUSE Tumbleweed 20171222-0 -> 20171223-0) the following errors were at the end of the run: Output of ghostscript-fonts-std-9.06-9.1.noarch.rpm %posttrans script: /var/adm/update-scripts/posttranskUZwJB/ghostscript-fonts-std-9.06-9.1.noarch.rpmVpEO9a: line 23: -n: command not found Output of ghostscript-fonts-other-9.06-9.1.noarch.rpm %posttrans script: /var/adm/update-scripts/posttranskUZwJB/ghostscript-fonts-other-9.06-9.1.noarch.rpmt5Vubq: line 23: -n: command not found -- Ken Schneider -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Tumbleweed - Review of the week 2017/52
by Dominique Leuenberger / DimStar 29 Dec '17

29 Dec '17

Dear Tumbleweed users and hackers, We end the year with a big bang – and one more weekly review. The holiday season struck us: many contributors enjoyed some days away from the computers AND openQA decided also to leave on a short break. For this reason we were not able to pass snapshots on to you, or let’s say, not more than thw two snapshots 1222 and 1223. Despite all absences, the snapshots still contain substantial changes, namely: * QEmu 2.11.0 * Qt 5.10 * Linux kernel 4.14.8 * JDK 10 is now used to build anything Java related The staging projects are already filled again and these are the main things being prepared: * Linux kernel 4.14.9 * KDE Frameworks 5.41.0 * RPM 4.14.0 (only a handful packages still to be fixed) * Libreoffice 6.0 * Poppler 0.62.0 * ICU 60 * The YaST Team’s libstorage-ng implementation * KDE3 will be removed from Tumbleweed I wish you all a great new-year celebration ahead, see you in 2018! Dominique

1 0

[opensuse-factory] New Tumbleweed snapshot 20171223 released!
by Dominique Leuenberger 29 Dec '17

29 Dec '17

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: ImageMagick (7.0.7.11 -> 7.0.7.15) akonadi-server alsa alsa-utils ca-certificates dhcp dpdk (17.08.1_k4.14.6_1 -> 17.08.1_k4.14.8_1) fwupd ghostscript-fonts glusterfs (3.8.15 -> 3.12.3) gnome-code-assistance gpg2 (2.2.3 -> 2.2.4) gpgme (1.9.0 -> 1.10.0) groff groff-full kdeclarative kernel-source (4.14.6 -> 4.14.8) kqtquickcharts ksshaskpass5 libjpeg-turbo (1.5.2 -> 1.5.3) libjpeg62-turbo libqt5-qtbase (5.9.3 -> 5.10.0) libqt5-qtconnectivity (5.9.3 -> 5.10.0) libqt5-qtdeclarative (5.9.3 -> 5.10.0) libqt5-qtgraphicaleffects (5.9.3 -> 5.10.0) libqt5-qtimageformats (5.9.3 -> 5.10.0) libqt5-qtlocation (5.9.3 -> 5.10.0) libqt5-qtmultimedia (5.9.3 -> 5.10.0) libqt5-qtquickcontrols (5.9.3 -> 5.10.0) libqt5-qtquickcontrols2 (5.9.3 -> 5.10.0) libqt5-qtscript (5.9.3 -> 5.10.0) libqt5-qtsensors (5.9.3 -> 5.10.0) libqt5-qtserialport (5.9.3 -> 5.10.0) libqt5-qtspeech (5.9.3 -> 5.10.0) libqt5-qtsvg (5.9.3 -> 5.10.0) libqt5-qttools (5.9.3 -> 5.10.0) libqt5-qttranslations (5.9.3 -> 5.10.0) libqt5-qtvirtualkeyboard (5.9.3 -> 5.10.0) libqt5-qtwebchannel (5.9.3 -> 5.10.0) libqt5-qtwebengine (5.9.3 -> 5.10.0) libqt5-qtwebkit libqt5-qtwebsockets (5.9.3 -> 5.10.0) libqt5-qtx11extras (5.9.3 -> 5.10.0) libqt5-qtxmlpatterns (5.9.3 -> 5.10.0) myspell-dictionaries (20171102 -> 20171218) netpbm (10.78.5 -> 10.80.1) open-vm-tools (10.1.15 -> 10.2.0) plasma5-desktop python-PySocks (1.6.7 -> 1.6.8) python-attrs python-dbus-python qalculate (2.0.0 -> 2.2.0) rdma-core screen vigra (1.11.0 -> 1.11.1) virtualbox (5.1.30_k4.14.6_1 -> 5.1.30_k4.14.8_1) xf86-video-ati xfsprogs (4.13.1 -> 4.14.0) === Details === ==== ImageMagick ==== Version update (7.0.7.11 -> 7.0.7.15) Subpackages: ImageMagick-devel ImageMagick-extra perl-PerlMagick - update to 7.0.7-15 * Overall standard deviation is the average of each pixel channel. * Support Stereo composite operator. * The -tint option no longer munges the alpha channel. * Don't delete in-memory blob when reading an image. * Support HDRI color profile management. ==== akonadi-server ==== Subpackages: akonadi-server-lang akonadi-server-sqlite libKF5AkonadiAgentBase5 libKF5AkonadiCore5 libKF5AkonadiPrivate5 libKF5AkonadiWidgets5 libKF5AkonadiXml5 - Move designer plugins to the devel package ==== alsa ==== Subpackages: alsa-devel libasound2 libasound2-32bit - Recover udev 42-hd-audio-pm.rules for TW that was dropped mistakenly at the previous change - Backport fix patches from upstream: 0001-pcm-route-Fix-use_getput-flag-computation-for-3-byte.patch 0002-conf-ucm-Rearrange-Makefile.am.patch 0003-conf-ucm-Add-dual-HD-audio-codecs-config-for-Lenovo.patch 0004-conf-ucm-Add-Gigabyte-mobo-UCM-profile-with-dual-HD-.patch - Add missing UCM profile for chtcx2072x (bsc#1068546) ==== alsa-utils ==== - Get rid of superfluous patch for ancient distros: alsa-utils-gettext-version-removal.diff - Remove superfluous file override, which is already included in the 1.1.5 tarball: alsaucm.rst - Backport upstream fixes: 0001-aplay-Adjust-sample-rate-limits-to-support-newer-har.patch 0002-alsactl-Only-start-restore-service-when-asoundrc-fil.patch - Cleanup specfile to rip off the too old kludges ==== ca-certificates ==== - Revert last change since we fixed systemd-preset-branding and this requires is no longer needed. ==== dhcp ==== Subpackages: dhcp-client dhcp-doc dhcp-relay dhcp-server - Drop old sysvinit support from the spec file. All the supported openSUSE distributions are systemd based so there isn't much point in keeping sysvinit support and files around. - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - Replace net-tools Requires in dhcp-client with hostname on suse_version >= 1330 (CODE15): net-tools does no longer provide any tool referenced by dhclient-script, but we require hostname (which is also a dependency to net-tools, thus hiding the issue). - use .gz year instead of current one to make build reproducible ==== dpdk ==== Version update (17.08.1_k4.14.6_1 -> 17.08.1_k4.14.8_1) - Added missing supported broadcom chipset family Broadcom NetXtreme II BCM57810 ==== fwupd ==== - Unbreak compilation on non-x86, upstream renamed options to disable plugins. ==== ghostscript-fonts ==== Subpackages: ghostscript-fonts-other ghostscript-fonts-std - Call reconfigure_fonts_* -n binary_RPM_package_name on openSUSE Tumbleweed and Leap 15.0 and SLE15 and later (boo#1067213). ==== glusterfs ==== Version update (3.8.15 -> 3.12.3) Subpackages: libgfapi0 libgfrpc0 libgfxdr0 libglusterfs0 - Add 0001-build-restore-ability-to-control-verbosity-settings.patch - Replace xdr_sizeof.c with an empty file - Update to new release 3.12.3 * -- Features introduced in 3.10 * Brick multiplexing * Support to display op-version information from clients * Support for rebalance time to completion estimation * Separation of tier as its own service * Statedump support for gfapi based applications * Disabled creation of trash directory by default * Implemented parallel readdirp with distribute xlator * -- Features introduced in 3.12: * Ability to mount sub-directories using the Gluster FUSE protocol * GFID to path conversion is enabled by default * Provided an option to set a limit on number of bricks multiplexed in a processes * Enhanced the option to export statfs data for bricks sharing the same backend filesystem * Provided a means to resolve GFID split-brain using the gluster CLI * Introduction of new api glfs_fd_set_lkowner() to set lock owner - Remove glusterfs-date.diff (no longer applies) ==== gnome-code-assistance ==== - Fix some rpmlint warnings: + env-script-interpreter: Replace (using sed) /usr/bin/env FOO hasbangs. + empty-%post/postun: disable the scripts on suse_version > 1320: %glib2_gsettings_schema_post/post are no longer needed as the %functionality is covered by file triggers. ==== gpg2 ==== Version update (2.2.3 -> 2.2.4) Subpackages: gpg2-lang - GnuPG 2.2.4: * gpg: Change default preferences to prefer SHA512. * gpg: Print a warning when more than 150 MiB are encrypted using a cipher with 64 bit block size. * gpg: Print a warning if the MDC feature has not been used for a message. * gpg: Fix regular expression of domain addresses in trust signatures * agent: New option --auto-expand-secmem to help with high numbers of concurrent connections. Requires libgcrypt 1.8.2 for having an effect. * dirmngr: Cache responses of WKD queries. * gpgconf: Add option --status-fd. * wks: Add commands --check and --remove-key to gpg-wks-server * Increase the backlog parameter of the daemons to 64 and add option --listen-backlog. - Not enabled features: * New configure option --enable-run-gnupg-user-socket to first try a socket directory which is not removed by systemd at session end. ==== gpgme ==== Version update (1.9.0 -> 1.10.0) Subpackages: libgpgme-devel libgpgme11 libgpgmepp6 libqgpgme7 - gpgme 1.10.0: * Now returns more specific error codes for decryption to distinguish between bad passphrase, user canceled, and no secret key. * Now returns key origin information if available. * Added context flag "auto-key-retrieve" to selectively enable the corresponding gpg option. * Added flag is_de_vs to decryption and verify results. * py: Use SEEK_SET as default for data.seek. * cpp: Various new APIs. * Reduced spawn overhead on Linux again. Added new configure option - -disable-linux-getdents to disable this feature for very old Linux versions. * Improved the Python bindings build system. * Made the test suite less fragile. * Interface changes relative to the 1.9.0 release: gpgme_decrypt_result_t EXTENDED: New field 'is_de_vs'. gpgme_signature_t EXTENDED: New field 'is_de_vs'. gpgme_keyorg_t NEW. gpgme_op_delete_ext NEW. gpgme_op_delete_ext_start NEW. GPGME_DELETE_ALLOW_SECRET NEW. GPGME_DELETE_FORCE NEW. gpgme_op_conf_dir NEW. gpgme_set_ctx_flag EXTENDED: New flag 'auto-key-retrieve'. cpp: DecryptionResult::isDeVs NEW. cpp: Signature::isDeVs NEW. cpp: EngineInfo::Version::operator> NEW. cpp: Context::createKey NEW. cpp: Context::startCreateKey NEW. cpp: Context::createSubkey NEW. cpp: Context::startCreateSubkey NEW. qt: QuickJob NEW. py: DecryptResult EXTENDED: New boolean field 'is_de_vs'. py: Signature EXTENDED: New boolean field 'is_de_vs'. py: GpgError EXTENDED: Partial results in 'results'. ==== groff ==== - Set the license to GPL-3.0+ as per COPYING - Replace xorg-x11-devel buildrequires by the needed individual libraries ==== groff-full ==== Subpackages: gxditview - Set the license to GPL-3.0+ as per COPYING - Replace xorg-x11-devel buildrequires by the needed individual libraries ==== kdeclarative ==== Subpackages: kdeclarative-components kdeclarative-devel libKF5CalendarEvents5 libKF5Declarative5 libKF5Declarative5-lang libKF5QuickAddons5 - Add MouseEventListener-Allow-accepting-mouse-event.patch to make it possible to fix double context menu issue with Qt 5.10 in plasma5-desktop (kde#387199) ==== kernel-source ==== Version update (4.14.6 -> 4.14.8) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - Linux 4.14.8 (bnc#1012628). - mfd: fsl-imx25: Clean up irq settings during removal (bnc#1012628). - crypto: algif_aead - fix reference counting of null skcipher (bnc#1012628). - crypto: rsa - fix buffer overread when stripping leading zeroes (bnc#1012628). - crypto: hmac - require that the underlying hash algorithm is unkeyed (bnc#1012628). - crypto: salsa20 - fix blkcipher_walk API usage (bnc#1012628). - crypto: af_alg - fix NULL pointer dereference in (bnc#1012628). - cifs: fix NULL deref in SMB2_read (bnc#1012628). - string.h: workaround for increased stack usage (bnc#1012628). - autofs: fix careless error in recent commit (bnc#1012628). - kernel: make groups_sort calling a responsibility group_info allocators (bnc#1012628). - mm, oom_reaper: fix memory corruption (bnc#1012628). - tracing: Allocate mask_str buffer dynamically (bnc#1012628). - USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID (bnc#1012628). - USB: core: prevent malicious bNumInterfaces overflow (bnc#1012628). - ovl: Pass ovl_get_nlink() parameters in right order (bnc#1012628). - ovl: update ctx->pos on impure dir iteration (bnc#1012628). - usbip: fix stub_rx: get_pipe() to validate endpoint number (bnc#1012628). - usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input (bnc#1012628). - usbip: prevent vhci_hcd driver from leaking a socket pointer address (bnc#1012628). - usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer (bnc#1012628). - mmc: core: apply NO_CMD23 quirk to some specific cards (bnc#1012628). - ceph: drop negative child dentries before try pruning inode's alias (bnc#1012628). - usb: xhci: fix TDS for MTK xHCI1.1 (bnc#1012628). - xhci: Don't add a virt_dev to the devs array before it's fully allocated (bnc#1012628). - IB/core: Bound check alternate path port number (bnc#1012628). - IB/core: Don't enforce PKey security on SMI MADs (bnc#1012628). - nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests (bnc#1012628). - arm64: mm: Fix pte_mkclean, pte_mkdirty semantics (bnc#1012628). - arm64: Initialise high_memory global variable earlier (bnc#1012628). - arm64: fix CONFIG_DEBUG_WX address reporting (bnc#1012628). - scsi: core: Fix a scsi_show_rq() NULL pointer dereference (bnc#1012628). - scsi: libsas: fix length error in sas_smp_handler() (bnc#1012628). - sched/rt: Do not pull from current CPU if only one CPU to pull (bnc#1012628). - dm: fix various targets to dm_register_target after module __init resources created (bnc#1012628). - SUNRPC: Fix a race in the receive code path (bnc#1012628). - iw_cxgb4: only insert drain cqes if wq is flushed (bnc#1012628). - x86/boot/compressed/64: Detect and handle 5-level paging at boot-time (bnc#1012628). - x86/boot/compressed/64: Print error if 5-level paging is not supported (bnc#1012628). - eeprom: at24: change nvmem stride to 1 (bnc#1012628). - posix-timer: Properly check sigevent->sigev_notify (bnc#1012628). - dmaengine: dmatest: move callback wait queue to thread context (bnc#1012628). - Revert "exec: avoid RLIMIT_STACK races with prlimit()" (bnc#1012628). - ext4: support fast symlinks from ext3 file systems (bnc#1012628). - ext4: fix fdatasync(2) after fallocate(2) operation (bnc#1012628). - ext4: add missing error check in __ext4_new_inode() (bnc#1012628). - ext4: fix crash when a directory's i_size is too small (bnc#1012628). - IB/mlx4: Fix RSS's QPC attributes assignments (bnc#1012628). - HID: cp2112: fix broken gpio_direction_input callback (bnc#1012628). - sfc: don't warn on successful change of MAC (bnc#1012628). - fbdev: controlfb: Add missing modes to fix out of bounds access (bnc#1012628). - video: udlfb: Fix read EDID timeout (bnc#1012628). - video: fbdev: au1200fb: Release some resources if a memory allocation fails (bnc#1012628). - video: fbdev: au1200fb: Return an error code if a memory allocation fails (bnc#1012628). - rtc: pcf8563: fix output clock rate (bnc#1012628). - scsi: aacraid: use timespec64 instead of timeval (bnc#1012628). - drm/amdgpu: bypass lru touch for KIQ ring submission (bnc#1012628). - PM / s2idle: Clear the events_check_enabled flag (bnc#1012628). - ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case (bnc#1012628). - dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type (bnc#1012628). - mlxsw: spectrum: Fix error return code in mlxsw_sp_port_create() (bnc#1012628). - PCI/PME: Handle invalid data when reading Root Status (bnc#1012628). - powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo (bnc#1012628). - PCI: Do not allocate more buses than available in parent (bnc#1012628). - iommu/mediatek: Fix driver name (bnc#1012628). - thunderbolt: tb: fix use after free in tb_activate_pcie_devices (bnc#1012628). - netfilter: ipvs: Fix inappropriate output of procfs (bnc#1012628). - powerpc/opal: Fix EBUSY bug in acquiring tokens (bnc#1012628). - powerpc/ipic: Fix status get and status clear (bnc#1012628). - powerpc/pseries/vio: Dispose of virq mapping on vdevice unregister (bnc#1012628). - platform/x86: intel_punit_ipc: Fix resource ioremap warning (bnc#1012628). - target/iscsi: Detect conn_cmd_list corruption early (bnc#1012628). - target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd() (bnc#1012628). - iscsi-target: fix memory leak in lio_target_tiqn_addtpg() (bnc#1012628). - target:fix condition return in core_pr_dump_initiator_port() (bnc#1012628). - target/file: Do not return error for UNMAP if length is zero (bnc#1012628). - badblocks: fix wrong return value in badblocks_set if badblocks are disabled (bnc#1012628). - iommu/amd: Limit the IOVA page range to the specified addresses (bnc#1012628). - xfs: truncate pagecache before writeback in xfs_setattr_size() (bnc#1012628). - arm-ccn: perf: Prevent module unload while PMU is in use (bnc#1012628). - crypto: tcrypt - fix buffer lengths in test_aead_speed() (bnc#1012628). - mm: Handle 0 flags in _calc_vm_trans() macro (bnc#1012628). - net: hns3: fix for getting advertised_caps in hns3_get_link_ksettings (bnc#1012628). - net: hns3: Fix a misuse to devm_free_irq (bnc#1012628). - staging: rtl8188eu: Revert part of "staging: rtl8188eu: fix comments with lines over 80 characters" (bnc#1012628). - clk: mediatek: add the option for determining PLL source clock (bnc#1012628). - clk: imx: imx7d: Fix parent clock for OCRAM_CLK (bnc#1012628). - clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU (bnc#1012628). - media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() (bnc#1012628). - clk: hi6220: mark clock cs_atb_syspll as critical (bnc#1012628). - blk-mq-sched: dispatch from scheduler IFF progress is made in - >dispatch (bnc#1012628). - clk: tegra: Use readl_relaxed_poll_timeout_atomic() in tegra210_clock_init() (bnc#1012628). - clk: tegra: Fix cclk_lp divisor register (bnc#1012628). - ppp: Destroy the mutex when cleanup (bnc#1012628). - ASoC: rsnd: rsnd_ssi_run_mods() needs to care ssi_parent_mod (bnc#1012628). - thermal/drivers/step_wise: Fix temperature regulation misbehavior (bnc#1012628). - misc: pci_endpoint_test: Fix failure path return values in probe (bnc#1012628). - misc: pci_endpoint_test: Avoid triggering a BUG() (bnc#1012628). - scsi: scsi_debug: write_same: fix error report (bnc#1012628). - GFS2: Take inode off order_write list when setting jdata flag (bnc#1012628). - media: usbtv: fix brightness and contrast controls (bnc#1012628). - rpmsg: glink: Initialize the "intent_req_comp" completion variable (bnc#1012628). - bcache: explicitly destroy mutex while exiting (bnc#1012628). - bcache: fix wrong cache_misses statistics (bnc#1012628). - Ib/hfi1: Return actual operational VLs in port info query (bnc#1012628). - Bluetooth: hci_ldisc: Fix another race when closing the tty (bnc#1012628). - arm64: prevent regressions in compressed kernel image size when upgrading to binutils 2.27 (bnc#1012628). - btrfs: fix false EIO for missing device (bnc#1012628). - btrfs: Explicitly handle btrfs_update_root failure (bnc#1012628). - btrfs: undo writable superblocke when sprouting fails (bnc#1012628). - btrfs: avoid null pointer dereference on fs_info when calling btrfs_crit (bnc#1012628). - btrfs: tests: Fix a memory leak in error handling path in 'run_test()' (bnc#1012628). - qtnfmac: modify full Tx queue error reporting (bnc#1012628). - mtd: spi-nor: stm32-quadspi: Fix uninitialized error return code (bnc#1012628). - ARM64: dts: meson-gxbb-odroidc2: fix usb1 power supply (bnc#1012628). - Bluetooth: btusb: Add new NFA344A entry (bnc#1012628). - samples/bpf: adjust rlimit RLIMIT_MEMLOCK for xdp1 (bnc#1012628). - liquidio: fix kernel panic in VF driver (bnc#1012628). - platform/x86: hp_accel: Add quirk for HP ProBook 440 G4 (bnc#1012628). - nvme: use kref_get_unless_zero in nvme_find_get_ns (bnc#1012628). - l2tp: cleanup l2tp_tunnel_delete calls (bnc#1012628). - xfs: fix log block underflow during recovery cycle verification (bnc#1012628). - xfs: return a distinct error code value for IGET_INCORE cache misses (bnc#1012628). - xfs: fix incorrect extent state in xfs_bmap_add_extent_unwritten_real (bnc#1012628). - net: dsa: lan9303: Do not disable switch fabric port 0 at .probe (bnc#1012628). - net: hns3: fix a bug in hclge_uninit_client_instance (bnc#1012628). - net: hns3: add nic_client check when initialize roce base information (bnc#1012628). - net: hns3: fix the bug of hns3_set_txbd_baseinfo (bnc#1012628). - RDMA/cxgb4: Declare stag as __be32 (bnc#1012628). - PCI: Detach driver before procfs & sysfs teardown on device remove (bnc#1012628). - scsi: hisi_sas: fix the risk of freeing slot twice (bnc#1012628). - scsi: hpsa: cleanup sas_phy structures in sysfs when unloading (bnc#1012628). - scsi: hpsa: destroy sas transport properties before scsi_host (bnc#1012628). - mfd: mxs-lradc: Fix error handling in mxs_lradc_probe() (bnc#1012628). - net: hns3: fix the TX/RX ring.queue_index in hns3_ring_get_cfg (bnc#1012628). - net: hns3: fix the bug when map buffer fail (bnc#1012628). - net: hns3: fix a bug when alloc new buffer (bnc#1012628). - serdev: ttyport: enforce tty-driver open() requirement (bnc#1012628). - powerpc/perf/hv-24x7: Fix incorrect comparison in memord (bnc#1012628). - powerpc/xmon: Check before calling xive functions (bnc#1012628). - soc: mediatek: pwrap: fix compiler errors (bnc#1012628). - ipv4: ipv4_default_advmss() should use route mtu (bnc#1012628). - KVM: nVMX: Fix EPT switching advertising (bnc#1012628). - tty fix oops when rmmod 8250 (bnc#1012628). - dev/dax: fix uninitialized variable build warning (bnc#1012628). - pinctrl: adi2: Fix Kconfig build problem (bnc#1012628). - raid5: Set R5_Expanded on parity devices as well as data (bnc#1012628). - IB/core: Fix use workqueue without WQ_MEM_RECLAIM (bnc#1012628). - IB/core: Fix calculation of maximum RoCE MTU (bnc#1012628). - vt6655: Fix a possible sleep-in-atomic bug in vt6655_suspend (bnc#1012628). - IB/hfi1: Mask out A bit from psn trace (bnc#1012628). - rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_createbss_cmd (bnc#1012628). - rtl8188eu: Fix a possible sleep-in-atomic bug in rtw_disassoc_cmd (bnc#1012628). - nullb: fix error return code in null_init() (bnc#1012628). - scsi: sd: change manage_start_stop to bool in sysfs interface (bnc#1012628). - scsi: sd: change allow_restart to bool in sysfs interface (bnc#1012628). - scsi: bfa: integer overflow in debugfs (bnc#1012628). - raid5-ppl: check recovery_offset when performing ppl recovery (bnc#1012628). - md-cluster: fix wrong condition check in raid1_write_request (bnc#1012628). - xprtrdma: Don't defer fencing an async RPC's chunks (bnc#1012628). - udf: Avoid overflow when session starts at large offset (bnc#1012628). - macvlan: Only deliver one copy of the frame to the macvlan interface (bnc#1012628). - IB/core: Fix endianness annotation in rdma_is_multicast_addr() (bnc#1012628). - RDMA/cma: Avoid triggering undefined behavior (bnc#1012628). - IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop (bnc#1012628). - icmp: don't fail on fragment reassembly time exceeded (bnc#1012628). - lightnvm: pblk: prevent gc kicks when gc is not operational (bnc#1012628). - lightnvm: pblk: fix changing GC group list for a line (bnc#1012628). - lightnvm: pblk: use right flag for GC allocation (bnc#1012628). - lightnvm: pblk: initialize debug stat counter (bnc#1012628). - lightnvm: pblk: fix min size for page mempool (bnc#1012628). - lightnvm: pblk: protect line bitmap while submitting meta io (bnc#1012628). - ath9k: fix tx99 potential info leak (bnc#1012628). - ath10k: fix core PCI suspend when WoWLAN is supported but disabled (bnc#1012628). - ath10k: fix build errors with !CONFIG_PM (bnc#1012628). - usb: musb: da8xx: fix babble condition handling (bnc#1012628). - commit 674981b - Linux 4.14.7 (bnc#1012628). - net: qmi_wwan: add Quectel BG96 2c7c:0296 (bnc#1012628). - net: thunderx: Fix TCP/UDP checksum offload for IPv6 pkts (bnc#1012628). - net: thunderx: Fix TCP/UDP checksum offload for IPv4 pkts (bnc#1012628). - net: realtek: r8169: implement set_link_ksettings() (bnc#1012628). - s390/qeth: fix early exit from error path (bnc#1012628). - tipc: fix memory leak in tipc_accept_from_sock() (bnc#1012628). - vhost: fix skb leak in handle_rx() (bnc#1012628). - rds: Fix NULL pointer dereference in __rds_rdma_map (bnc#1012628). - sit: update frag_off info (bnc#1012628). - tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb() (bnc#1012628). - packet: fix crash in fanout_demux_rollover() (bnc#1012628). - net/packet: fix a race in packet_bind() and packet_notifier() (bnc#1012628). - tcp: remove buggy call to tcp_v6_restore_cb() (bnc#1012628). - usbnet: fix alignment for frames with no ethernet header (bnc#1012628). - net: remove hlist_nulls_add_tail_rcu() (bnc#1012628). - stmmac: reset last TSO segment size after device open (bnc#1012628). - tcp/dccp: block bh before arming time_wait timer (bnc#1012628). - s390/qeth: build max size GSO skbs on L2 devices (bnc#1012628). - s390/qeth: fix thinko in IPv4 multicast address tracking (bnc#1012628). - s390/qeth: fix GSO throughput regression (bnc#1012628). - tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match() (bnc#1012628). - tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv() (bnc#1012628). - tcp: use current time in tcp_rcv_space_adjust() (bnc#1012628). - net: sched: cbq: create block for q->link.block (bnc#1012628). - tap: free skb if flags error (bnc#1012628). - tcp: when scheduling TLP, time of RTO should account for current ACK (bnc#1012628). - tun: free skb in early errors (bnc#1012628). - net: ipv6: Fixup device for anycast routes during copy (bnc#1012628). - tun: fix rcu_read_lock imbalance in tun_build_skb (bnc#1012628). - net: accept UFO datagrams from tuntap and packet (bnc#1012628). - net: openvswitch: datapath: fix data type in queue_gso_packets (bnc#1012628). - cls_bpf: don't decrement net's refcount when offload fails (bnc#1012628). - sctp: use right member as the param of list_for_each_entry (bnc#1012628). - ipmi: Stop timers before cleaning up the module (bnc#1012628). - usb: gadget: ffs: Forbid usb_ep_alloc_request from sleeping (bnc#1012628). - fcntl: don't cap l_start and l_end values for F_GETLK64 in compat syscall (bnc#1012628). - fix kcm_clone() (bnc#1012628). - KVM: arm/arm64: vgic-its: Preserve the revious read from the pending table (bnc#1012628). - kbuild: do not call cc-option before KBUILD_CFLAGS initialization (bnc#1012628). - powerpc/powernv/idle: Round up latency and residency values (bnc#1012628). - ipvlan: fix ipv6 outbound device (bnc#1012628). - ide: ide-atapi: fix compile error with defining macro DEBUG (bnc#1012628). - blk-mq: Avoid that request queue removal can trigger list corruption (bnc#1012628). - nvmet-rdma: update queue list during ib_device removal (bnc#1012628). - audit: Allow auditd to set pid to 0 to end auditing (bnc#1012628). - audit: ensure that 'audit=1' actually enables audit for PID 1 (bnc#1012628). - dm raid: fix panic when attempting to force a raid to sync (bnc#1012628). - md: free unused memory after bitmap resize (bnc#1012628). - RDMA/cxgb4: Annotate r2 and stag as __be32 (bnc#1012628). - x86/intel_rdt: Fix potential deadlock during resctrl unmount (bnc#1012628). - Refresh patches.suse/supported-flag. - commit 0598608 - x86/stacktrace: make clear the success paths (bnc#1058115). - Refresh patches.suse/0003-x86-stacktrace-remove-STACKTRACE_DUMP_ONCE-from-__sa.patch. - Refresh patches.suse/0004-x86-stacktrace-do-not-fail-for-ORC-with-regs-on-stac.patch. - Delete patches.suse/0002-x86-stacktrace-remove-unwind_state-error.patch. Fix livepatch to succeed also for kthreads and idle tasks. - commit 580e12c ==== kqtquickcharts ==== - Add Add-missing-types-to-qmldir.patch to fix ktouch not starting with Qt 5.10 ==== ksshaskpass5 ==== Subpackages: ksshaskpass5-lang - Do not export SSH_ASKPASS anymore, the script was broken anyway and the default askpass dispatches to ksshaskpass anyway ==== libjpeg-turbo ==== Version update (1.5.2 -> 1.5.3) Subpackages: libjpeg8 libjpeg8-32bit libturbojpeg0 - - update to version 1.5.3 1. Fixed a NullPointerException in the TurboJPEG Java wrapper that occurred when using the YUVImage constructor that creates an instance backed by separate image planes and allocates memory for the image planes. 2. Fixed an issue whereby the Java version of TJUnitTest would fail when testing BufferedImage encoding/decoding on big endian systems. 3. Fixed a segfault in djpeg that would occur if an output format other than PPM/PGM was selected along with the `-crop` option. The `-crop` option now works with the GIF and Targa formats as well (unfortunately, it cannot be made to work with the BMP and RLE formats due to the fact that those output engines write scanlines in bottom-up order.) djpeg will now exit gracefully if an output format other than PPM/PGM, GIF, or Targa is selected along with the `-crop` option. 4. Fixed an issue whereby `jpeg_skip_scanlines()` would segfault if color quantization was enabled. 5. TJBench (both C and Java versions) will now display usage information if any command-line argument is unrecognized. This prevents the program from silently ignoring typos. 6. Fixed an access violation in tjbench.exe (Windows) that occurred when the program was used to decompress an existing JPEG image. 7. Fixed an ArrayIndexOutOfBoundsException in the TJExample Java program that occurred when attempting to decompress a JPEG image that had been compressed with 4:1:1 chrominance subsampling. 8. Fixed an issue whereby, when using `jpeg_skip_scanlines()` to skip to the end of a single-scan (non-progressive) image, subsequent calls to `jpeg_consume_input()` would return `JPEG_SUSPENDED` rather than `JPEG_REACHED_EOI`. 9. `jpeg_crop_scanlines()` now works correctly when decompressing grayscale JPEG images that were compressed with a sampling factor other than 1 (for instance, with `cjpeg -grayscale -sample 2x2`). ==== libjpeg62-turbo ==== Subpackages: libjpeg62 libjpeg62-devel - update to version 1.5.3 1. Fixed a NullPointerException in the TurboJPEG Java wrapper that occurred when using the YUVImage constructor that creates an instance backed by separate image planes and allocates memory for the image planes. 2. Fixed an issue whereby the Java version of TJUnitTest would fail when testing BufferedImage encoding/decoding on big endian systems. 3. Fixed a segfault in djpeg that would occur if an output format other than PPM/PGM was selected along with the `-crop` option. The `-crop` option now works with the GIF and Targa formats as well (unfortunately, it cannot be made to work with the BMP and RLE formats due to the fact that those output engines write scanlines in bottom-up order.) djpeg will now exit gracefully if an output format other than PPM/PGM, GIF, or Targa is selected along with the `-crop` option. 4. Fixed an issue whereby `jpeg_skip_scanlines()` would segfault if color quantization was enabled. 5. TJBench (both C and Java versions) will now display usage information if any command-line argument is unrecognized. This prevents the program from silently ignoring typos. 6. Fixed an access violation in tjbench.exe (Windows) that occurred when the program was used to decompress an existing JPEG image. 7. Fixed an ArrayIndexOutOfBoundsException in the TJExample Java program that occurred when attempting to decompress a JPEG image that had been compressed with 4:1:1 chrominance subsampling. 8. Fixed an issue whereby, when using `jpeg_skip_scanlines()` to skip to the end of a single-scan (non-progressive) image, subsequent calls to `jpeg_consume_input()` would return `JPEG_SUSPENDED` rather than `JPEG_REACHED_EOI`. 9. `jpeg_crop_scanlines()` now works correctly when decompressing grayscale JPEG images that were compressed with a sampling factor other than 1 (for instance, with `cjpeg -grayscale -sample 2x2`). ==== libqt5-qtbase ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5Concurrent-devel libQt5Concurrent5 libQt5Core-devel libQt5Core-private-headers-devel libQt5Core5 libQt5DBus-devel libQt5DBus5 libQt5Gui-devel libQt5Gui-private-headers-devel libQt5Gui5 libQt5Network-devel libQt5Network5 libQt5OpenGL-devel libQt5OpenGL5 libQt5PlatformHeaders-devel libQt5PrintSupport-devel libQt5PrintSupport5 libQt5Sql-devel libQt5Sql5 libQt5Sql5-mysql libQt5Sql5-postgresql libQt5Sql5-sqlite libQt5Sql5-unixODBC libQt5Test-devel libQt5Test5 libQt5Widgets-devel libQt5Widgets5 libQt5Xml-devel libQt5Xml5 libqt5-qtbase-common-devel libqt5-qtbase-devel libqt5-qtbase-platformtheme-gtk3 - Add 0001-Fix-custom-page-size-handling-in-the-Unix-print-dial.patch to fix custom page size handling in the Unix print dialog (QTBUG-58733) - Add patches from upstream to reintroduce the advanced tab in the Qt printer properties dialog: 0001-Remove-QPrintDialogPrivate-applyPrinterProperties-no.patch 0002-Remove-QUnixPrintWidgetPrivate-applyPrinterPropertie.patch 0003-Remove-QPrintPropertiesDialog-applyPrinterProperties.patch 0004-Remove-QCupsJobWidget-setPrinter.patch 0005-Remove-QPrintPropertiesDialog-selectPrinter.patch 0006-Remove-QPageSetupWidget-selectPrinter.patch 0007-Introduce-QPrintDevice-property-setProperty.patch 0008-Allow-access-to-ppd-file-and-ppdMarkOption-via-QPpdP.patch 0009-QPlatformPrintDevice-use-QVector-not-QList-in-the-AP.patch 0010-Reintroduce-the-Advanced-tab-in-the-QPrintProperties.patch 0011-QtPrintSupport-Fix-build.patch - Small change in 0001-Add-remote-print-queue-support.patch so 0007-Allow-access-to-ppd-file-and-ppdMarkOption-via-QPpdP.patch applies cleanly. - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release - Refresh tell-the-truth-about-private-api.patch ==== libqt5-qtconnectivity ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5Bluetooth5 libQt5Bluetooth5-imports libQt5Nfc5 libQt5Nfc5-imports libqt5-qtconnectivity-tools - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtdeclarative ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQtQuick5 libqt5-qtdeclarative-devel libqt5-qtdeclarative-tools - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtgraphicaleffects ==== Version update (5.9.3 -> 5.10.0) - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtimageformats ==== Version update (5.9.3 -> 5.10.0) Subpackages: libqt5-qtimageformats-devel - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtlocation ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5Location5 libQt5Positioning5 libqt5-qtlocation-devel - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release - Add some feature from the Chromium builds to determine the maximum allowed parallel processes based on the available memory. ==== libqt5-qtmultimedia ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5Multimedia5 libqt5-qtmultimedia-devel - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtquickcontrols ==== Version update (5.9.3 -> 5.10.0) - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtquickcontrols2 ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5QuickControls2-5 libQt5QuickTemplates2-5 - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtscript ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5Script5 libqt5-qtscript-devel - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtsensors ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5Sensors5 libQt5Sensors5-imports libqt5-qtsensors-devel - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtserialport ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5SerialPort5 libqt5-qtserialport-devel - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtspeech ==== Version update (5.9.3 -> 5.10.0) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtsvg ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5Svg5 libqt5-qtsvg-devel - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qttools ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5Designer5 libQt5DesignerComponents5 libQt5Help5 libqt5-linguist libqt5-linguist-devel libqt5-qdbus libqt5-qtpaths libqt5-qttools-devel libqt5-qttools-doc - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qttranslations ==== Version update (5.9.3 -> 5.10.0) - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtvirtualkeyboard ==== Version update (5.9.3 -> 5.10.0) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtwebchannel ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5WebChannel5 libQt5WebChannel5-imports - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtwebengine ==== Version update (5.9.3 -> 5.10.0) - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtwebkit ==== Subpackages: libQt5WebKit5 libQt5WebKit5-devel libQt5WebKit5-imports libQt5WebKitWidgets-devel libQt5WebKitWidgets5 - Update the license tag (boo#967696) - Update to 5.10 Beta 4 - Contains bugfixes - Update to 5.10 Beta 1 - For more information visit: https://blog.qt.io/blog/2017/10/09/qt-5-10-beta-released/ ==== libqt5-qtwebsockets ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5WebSockets5 libQt5WebSockets5-imports libqt5-qtwebsockets-devel - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtx11extras ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5X11Extras5 libqt5-qtx11extras-devel - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== libqt5-qtxmlpatterns ==== Version update (5.9.3 -> 5.10.0) Subpackages: libQt5XmlPatterns5 libqt5-qtxmlpatterns-devel - Update the license tag (boo#967696) - Update to 5.10.0 final * New bugfix release - Update to 5.10.0 RC 2 * New bugfix release - Update to 5.10.0 RC 1 * New bugfix release ==== myspell-dictionaries ==== Version update (20171102 -> 20171218) Subpackages: myspell-cs_CZ myspell-da_DK myspell-de myspell-de_DE myspell-el_GR myspell-en myspell-en_GB myspell-en_US myspell-es myspell-es_ES myspell-fr_FR myspell-hu_HU myspell-it_IT myspell-lightproof-en myspell-lightproof-hu_HU myspell-lightproof-pt_BR myspell-lightproof-ru_RU myspell-pl_PL myspell-pt_BR myspell-ru_RU - git state 20171218 * hungarian, spanish - update.sh: save git log before removing .git; run spec-cleaner if present ==== netpbm ==== Version update (10.78.5 -> 10.80.1) Subpackages: libnetpbm-devel libnetpbm11 - updated to 10.80.1 * pnmtopalm: Refuse to create a compressed image with more than 8 bits per pixel. * pbmtext, libnetpbm font facilities: allow glyphs in font files that have no bitmap data; just used for their advance value to code a space. * pbmtext: Improve error message when there is a problem reading the font file. * libnetpbm font facilities: consider font invalid if a glyph is more than 65536 pixels high or wide. * ppmshadow: handle images with a black background and low contrast images (i.e. little difference between foreground and background). * ppmbrighten: fix bug: red pixels change hue. Introduced in after Netpbm 10.11 (October 2002) and before Netpbm 10.18 (September 2003). * palmtopnm: fix crash if invalid input contains color index that is not in the palette. Always broken (palmtopnm was new in Netpbm 9.10 (October 2001)). * pnmtopalm: fix incorrect output with certain input files and - packbits_compression. Always broken. -packbits_compression was new in Netpbm 10.27 (March 2005). * pnmtopalm: Correct error message recommending running pnmquant when the real solution is to run pnmremap to modify the image to Palm standard colors. * pnmtopalm: Fix bug causing "color not in colormap" failure with - colormap and maxval other than 255. * libnetpbm: font facilities: fix invalid memory reference with certain font files. * libnetpbm: ppm_readcolordict: Improve error message when there is a problem reading the color dictionary. Affects ppmhist. * pgmmake: Fix bug: treats non-numeric gray-level argument as zero. Always broken (Pgmmake was new in Netpbm 10.32, February 2006). * pdbimgtopam, pamtopdbimg: fix various cases of incorrect output, some always present (programs were new in Netpbm 10.52.00 (October 2010)). * libnetpbm: pnm_parsecolorn(), pnm_parsecolor(): fix parsing of rgb: color specifications: yields value slightly too dim. Affects many programs. Broken in Netpbm 10.79 (June 2017). - Version update to 10.79.3: * Fix license clash between GPL-2 and GPL-3 * Few small fixes - Drop patch netpbm-missing-file-close.patch fixed differently by upstream - Drop patch netpbm-jasper.patch which is no longer needed - Remove accidental -O0 added to cflags - Version update to 10.79.2: * Fix 'format-security' GNU compiler warning. * libnetpbm: pnm_parsecolorn(), pnm_parsecolor(): fix parsing of rgb: color specifications: yields value slightly too dim. * pamgauss: Add -maximize, -oversample . Thanks Anton Shepelev <anton.txt(a)gmail.com> * pnmconvol: Extend -normalize to be applicable to convolution kernels specified by PGM file. Thanks Anton Shepelev <anton.txt(a)gmail.com> * g3topbm: tolerate fill bits. * pbmtog3: Add -align8, -align16. * ppmshadow: Improve results for very small maxval. * ppmshadow: eliminate extraneous messages from pnmconvol. * libnetpbm: Improve error message for purported image that is exactly 1 byte long (so ends in the middle of what would be the magic number). * pbmtox10bm: Get the Perl interpreter for this Perl program from the PATH instead of hardcoded as /usr/bin/perl (like all other Netpbm Perl programs). * ppmcolormask: fix incorrect output when input maxval is not 255. * bmptopnm: fix crash when input is a Windows BMP with negative number for width. Always broken. (bmptopnm was new, as bmptoppm, in original Netpbm, 1992). * pamcomp: fix incorrect output with -mixtransparency. Always broken. (-mixtransparency was new in Netpbm 10.56, September 2011). * pamcomp: remove debug trace message with -mixtransparency. Always broken. (-mixtransparency was new in Netpbm 10.56, September 2011). * pnmtojpeg: fix array bounds violation in argument list. Always broken (pnmtojpeg was new to Netpbm in Netpbm 8.2 (March 2000). * pamcrater: fix incorrect output with non-square image. Introduced in Netpbm 10.69 (December 2014). * svgtopam: fix treating negative width or height values in SVG like twos complement positive numbers; fail instead. Always broken (svgtopam was new in Netpbm 10.33 (March 2006)). * svgtopam: fix error messages when input has splines or negative positions. Always broken (svgtopam was new in Netpbm 10.33 (March 2006)). * libnetpbm: fix bug: pm_system_XXX closes Standard Input if you supply a Standard Output accepter but not a Standard Input feeder. Broken since Netpbm 10.40 (September 2007). * Build: don't try to build standardppmdfont.c if it already exists (so don't require ppmdcfont to exist). Broken around Netpbm 10.35 (2006). * Build: Define _XOPEN_SOURCE=500 in source files that use M_PI. While C libraries in the past have always provided this with just _XOPEN_SOURCE=null, it appears that M_PI is actually defined by Single Unix Specification 2, aka UNIX98, for which you need _XOPEN_SOURCE=500, and Cygwin has changed to enforce this. ==== open-vm-tools ==== Version update (10.1.15 -> 10.2.0) Subpackages: libvmtools0 open-vm-tools-desktop - The VMware provided open-vm-tools-deploypkg is now obsoleted. - Update to 10.2.0 (build 7253323) (boo#1073174) + Fix memory leak in vmtoolsd. + Add SUSE Server for SAP Applications to hostinfoPosix.c + Fix crash issue when stopping vmtoolsd(vmuser). + Add new GOS definitions (e.g. SLES 15) for virtual hardware version 14. + Add /usr/bin/vmware-user symlink to vmware-user-suid-wrapper. + Provide vmware-vgauth-smoketest, for VGAUthservice validation. - Modify udev rules to only adjust timeout on disk devices (bsc#1063320) + udev_rules-disk-devs-only.patch - Due to a hard dependency on glibc 2.12, open-vm-tools 10.2.0 no longer builds for SLES11. Remove all SLES11 specific options in spec file. - Drop unnecessary patches - Report-SLES12-SAP-guest-OS-as-SLES12.patch - resolutionKMS-wayland.patch - fix_discards_qualifiers_warning.patch (only applicable to SLES11) ==== plasma5-desktop ==== Subpackages: plasma5-desktop-lang - Add patch to fix issue appearing with Qt 5.10 (kde#387199): * 0001-Folder-View-Accept-mouse-events-if-we-handled-them.patch ==== python-PySocks ==== Version update (1.6.7 -> 1.6.8) - specfile: * update copyright year - update to version 1.6.8: * Remove support for EOL Python 3.3 * Make create_connection() signature match socket module * Add python version classifiers * Include win_inet_pton when installing on Python 2.x under Windows * fix #937 getpeername() errror while using gevent * Update README.md * PEP8 fixes for line length, indentation, line breaks and other minor issues. * Normalize quoting. * Update socks.py ==== python-attrs ==== - add test requirements, run tests conditionally (not BuildRequiring pytest fixes bsc#1073845) ==== python-dbus-python ==== Subpackages: python2-dbus-python python3-dbus-python - Escape the usage of %{VERSION} when calling out to rpm. RPM 4.14 has %{VERSION} defined as 'the main packages version'. ==== qalculate ==== Version update (2.0.0 -> 2.2.0) Subpackages: libqalculate-devel - Update to 2.2.0 * Bitcoin support * Fix wrong partial calculation of square root in exact mode in some cases * Equation solving enhancements Check http://qalculate.github.io/news.html for the complete changelog ==== rdma-core ==== Subpackages: libibverbs libibverbs1 libmlx4-1 libmlx5-1 librdmacm1 - Add srp_daemon-handle-SM-lid-change.patch and srp_daemon-fix-CQ-handling.patch to fix issue with SRP daemon not handling SM changes (bsc#1072884) ==== screen ==== - install pam file to make screen locking work again [bnc#1056192] new file: screen.pam ==== vigra ==== Version update (1.11.0 -> 1.11.1) - Version update to 1.11.1: * Added 3D convex hull computation and features * Added Random Forest version 3, inspired by LEMON's graph API, to simplify customization of RF variants * Improved hierarchical clustering * Minor improvements and bug fixes in code and docs. - cleanup with spec-cleaner - remove gcc7-Fix-parameter-of-ImagePyramid-swap.patch * upstreamed in 18675a51fca27b324eb4e4b49593bcee9bc4535e ==== virtualbox ==== Version update (5.1.30_k4.14.6_1 -> 5.1.30_k4.14.8_1) Subpackages: virtualbox-guest-kmp-default virtualbox-guest-tools virtualbox-guest-x11 - Fix spelling mistakes in vbox-usb-warning.diff. ==== xf86-video-ati ==== - Stick to use pkgconfig style dependencies ==== xfsprogs ==== Version update (4.13.1 -> 4.14.0) - Deletes already merged xfs_io-stat-fix-typo-in-statfs-f_flags.patch - Deletes already merged xfs_io-stat-treat-statfs.f_flags-as-optional.patch - Refreshes patch xfsprogs-docdir.diff - Update to v4.14.0: * xfs_io: stat: treat statfs.f_flags as optional * xfs_io: stat: fix typo in statfs->f_flags * xfsprogs: fix wrong variable types in pwrite/pread code * xfs_io: Allow partial writes * xfs_io: Add RWF_NOWAIT to pwritev2() * xfs_io: Add support for pwritev2() * xfs_io: Disable -V if pwritev is not available * xfs_repair: always release btree buffers when refcountbt checks fail * misc: fix ubsan warnings * misc: enable thread sanitizer if the builder wants it * misc: enable gcc/clang address sanitizer if the builder wants it * misc: enable ubsan if the builder wants it * xfs_repair: fix cowextsize field checking and repairing * xfs_repair: clear DAX flag from non-file inodes * xfs_repair: fix bag memory overwrite problems * xfs_io: add new error injection knobs to inject command * xfsprogs: explicitly cast troublesome types to match printf format specifiers * db: increase metadump's default overly long extent discard threshold * build: define _DEFAULT_SOURCE with _BSD_SOURCE for preadv * xfsprogs: add xfs_spaceman to .gitignore * xfs_io: report io error for pwrite -W and -w * xfs_metadump: zap stale data in DIR2_LEAF1 dirs * metadump: update manpage for dirty log/obfuscation issue * kill off u_int*_t types * xfs: trim writepage mapping to within eof * xfs: handle error if xfs_btree_get_bufs fails * xfs: Fix bool initialization/comparison * xfs: Don't log uninitialised fields in inode structures * xfs: revert "xfs: factor rmap btree size into the indlen calculations" * xfs: perag initialization should only touch m_ag_max_usable for AG 0 * xfs: fix compiler warnings * xfs: simplify the rmap code in xfs_bmse_merge * xfs: use xfs_iext_*_extent helpers in xfs_bmap_split_extent_at * xfs: use xfs_iext_*_extent helpers in xfs_bmap_shift_extents * xfs: move some code around inside xfs_bmap_shift_extents * xfs: use xfs_iext_get_extent in xfs_bmap_first_unused * xfs: switch xfs_bmap_local_to_extents to use xfs_iext_insert * xfs: add a xfs_iext_update_extent helper * xfs: relog dirty buffers during swapext bmbt owner change * xfs: skip bmbt block ino validation during owner change * xfs: don't log dirty ranges for ordered buffers * xfs: remove the ip argument to xfs_defer_finish * xfs: rename xfs_defer_join to xfs_defer_ijoin * xfs: refactor xfs_trans_roll * xfs: stop searching for free slots in an inode chunk when there are none -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

Re: [opensuse-factory] kmail not sending mail FIXED
by constant＠indo.net.id 29 Dec '17

29 Dec '17

Re: [opensuse-factory] kmail not sending mail FIXED From: "C. Brouerius van Nidek" <constant(a)indo.net.id> To: opensuse-factory(a)opensuse.org Date: Wed Dec 27 16:24:59 2017 On Wednesday, December 27, 2017 2:07:24 PM WIB Knurpht - Gertjan Lettink wrote: > Op woensdag 27 december 2017 05:37:28 CET schreef constant(a)indo.net.id: > > On Tuesday, December 26, 2017 5:57:31 PM WIB mfeilner wrote: > > > Am 2017-12-22 14:09, schrieb Knurpht - Gertjan Lettink: > > > > For those seeing the issue of kmail not sending messages: there's a > > > > fix > > > > and > > > > the fixed package is availble through the TW Upddate repo > > > > -- > > > > Gertjan Lettink, a.k.a. Knurpht > > > > > > > > openSUSE Board Member > > > > openSUSE Forums Team > > > > > > Thanks a lot, but I guess I have exactly that problem since last > > > Thursday... zypper dup didn't fix it... is there a link to a solution? > > > (I'm still reading and searching ...) > > > > It is a MeToo situation. Sending emails to the lists is a pain in the neck > > and up to now no solution. > > Do you have the Update repo active and refreshed? It already has been fixed, > but so far the fix is only pushed in the Update repo. Updated repro, active and refreshed. Still no emails send. Have to go over the web function of my ISP for my reply. -- opensuse:tumbleweed:20171222 Qt: 5.9.3 KDE Frameworks: 5.40.0 kf5-config: 1.0 KDE Plasma: 5.11.4 plasmashell 5.11.4 Kernel: 4.14.6-1-default Linux User 183145 working on a Pentium IV . -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 5

[opensuse-factory] postgres-version in Leap 15
by Axel Braun 29 Dec '17

29 Dec '17

Hi, in current Leap 15 Alpha the version of postgres Server is 9.6. As postgres10 is already in TW, when will it hit Leap 15? Cheers Axel -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] Installing Tumbleweed fails (nvidia?)
by Peter Suetterlin 28 Dec '17

28 Dec '17

I just decided to install Tumbleweed on my desktop (I already run it happily on my laptop for 16 months...) First fun thing: I was greeted by the Xmas Penguins bootscreen! I didn't even know that it's still around. Must have been 15 years at least since I saw them last time. Beatuiful :D Then the not so nice thing: I cannot install. At least not in default mode. It gets to the point when it starts the installer. I only see a underscore in the upper left corner for some seconds, and then monitor goes into powersave. First thought it's the 4k screen, and tried running the installer at lower resolution, but still the same. So I assume it's the NVidia GTX 1060 that is giving the trouble? Anyone had similar trouble before? I'm installing in text mode right now.... -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] fcitx to write in CJK in calibre
by Chan Ju Ping 28 Dec '17

28 Dec '17

Seasonal greetings mailing list! I was wondering whether there is a recommended method for writing in CJK within calibre. I am currently searching by pasting the CJK text from Kate into the search bar in calibre. Closest thing I could find on the issue for openSUSE was found here, but it is probably a bit old to follow along: https://www.mobileread.com/forums/showthread.php?t=244887 Some digging also brought me to this bug report, though I do not know how to remedy the problem. https://github.com/NixOS/nixpkgs/issues/15569

5 11