March 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] opensuse 12.3 RC | starting LSB... and freeze
by Luis González 01 Mar '13

01 Mar '13

Hello, I'm installing the opensuse 12.3 RC and I noticed an issue before the installation finished, and after reviewed several times I realized the error (laptop freeze completely) occurred when starting LSB. /var/log/messages not shown relevant info boot.log said Failed to start Network Manager, and of course I do no have network devices. When a launch yast and go to Network Devices, the error occurred again detecting devices... systemctl status NetworkManager.service said Active: failed status = 1/FAILURE What can I do to fix this issue? Can I look in other log files? Any suggestions? thank you! -- Luis González @ GMAIL -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] 12.3 RC2: worrisome kernel warnings:
by Carlos E. R. 01 Mar '13

01 Mar '13

What is this I see on my /var/log/warn? > 2013-03-01T21:58:59.516766+01:00 Minas-Anor kernel: [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) > 2013-03-01T21:58:59.516768+01:00 Minas-Anor kernel: [ 0.000000] ACPI: XSDT 00000000b9ff6120 00064 (v01 HPQOEM SLIC-MPC 00000001 01000013) > 2013-03-01T21:58:59.516770+01:00 Minas-Anor kernel: [ 0.000000] ACPI: FACP 00000000b9ff5000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516774+01:00 Minas-Anor kernel: [ 0.000000] ACPI: DSDT 00000000b9fe5000 0BA4E (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516776+01:00 Minas-Anor kernel: [ 0.000000] ACPI: FACS 00000000b9f8f000 00040 > 2013-03-01T21:58:59.516778+01:00 Minas-Anor kernel: [ 0.000000] ACPI: HPET 00000000b9ff4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516780+01:00 Minas-Anor kernel: [ 0.000000] ACPI: APIC 00000000b9ff3000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516782+01:00 Minas-Anor kernel: [ 0.000000] ACPI: MCFG 00000000b9ff2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516783+01:00 Minas-Anor kernel: [ 0.000000] ACPI: ASF! 00000000b9ff1000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516785+01:00 Minas-Anor kernel: [ 0.000000] ACPI: SLIC 00000000b9fe4000 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) > 2013-03-01T21:58:59.516789+01:00 Minas-Anor kernel: [ 0.000000] ACPI: BOOT 00000000b9fe3000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > 2013-03-01T21:58:59.516791+01:00 Minas-Anor kernel: [ 0.000000] ACPI: SSDT 00000000b9fe2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117) > 2013-03-01T21:58:59.516806+01:00 Minas-Anor kernel: [ 0.000000] Zone ranges: > 2013-03-01T21:58:59.516807+01:00 Minas-Anor kernel: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] > 2013-03-01T21:58:59.516809+01:00 Minas-Anor kernel: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] > 2013-03-01T21:58:59.516811+01:00 Minas-Anor kernel: [ 0.000000] Normal [mem 0x100000000-0x13fffffff] > 2013-03-01T21:58:59.516813+01:00 Minas-Anor kernel: [ 0.000000] Movable zone start for each node > 2013-03-01T21:58:59.516814+01:00 Minas-Anor kernel: [ 0.000000] Early memory node ranges > 2013-03-01T21:58:59.516820+01:00 Minas-Anor kernel: [ 0.000000] node 0: [mem 0x00010000-0x0009dfff] > 2013-03-01T21:58:59.516822+01:00 Minas-Anor kernel: [ 0.000000] node 0: [mem 0x00100000-0xb9e60fff] > 2013-03-01T21:58:59.516824+01:00 Minas-Anor kernel: [ 0.000000] node 0: [mem 0xb9ebf000-0xb9f81fff] > 2013-03-01T21:58:59.516826+01:00 Minas-Anor kernel: [ 0.000000] node 0: [mem 0xb9fbf000-0xb9fe1fff] > 2013-03-01T21:58:59.516827+01:00 Minas-Anor kernel: [ 0.000000] node 0: [mem 0xb9ff7000-0xb9ffffff] > 2013-03-01T21:58:59.516829+01:00 Minas-Anor kernel: [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] > 2013-03-01T21:58:59.517038+01:00 Minas-Anor kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1005784 > 2013-03-01T21:58:59.517040+01:00 Minas-Anor kernel: [ 0.000000] Policy zone: Normal > 2013-03-01T21:58:59.517178+01:00 Minas-Anor kernel: [ 0.056050] mtrr: your CPUs had inconsistent variable MTRR settings > 2013-03-01T21:58:59.517198+01:00 Minas-Anor kernel: [ 0.061564] ACPI: Executed 1 blocks of module-level executable AML code > 2013-03-01T21:58:59.517201+01:00 Minas-Anor kernel: [ 0.063666] ACPI: SSDT 00000000b9e70c98 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) > 2013-03-01T21:58:59.517203+01:00 Minas-Anor kernel: [ 0.064225] ACPI: Dynamic OEM Table Load: > 2013-03-01T21:58:59.517205+01:00 Minas-Anor kernel: [ 0.064228] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) > 2013-03-01T21:58:59.517206+01:00 Minas-Anor kernel: [ 0.064444] ACPI: SSDT 00000000b9e6e618 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) > 2013-03-01T21:58:59.517210+01:00 Minas-Anor kernel: [ 0.064960] ACPI: Dynamic OEM Table Load: > 2013-03-01T21:58:59.517212+01:00 Minas-Anor kernel: [ 0.064963] ACPI: SSDT (null) 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) > 2013-03-01T21:58:59.517214+01:00 Minas-Anor kernel: [ 0.065372] ACPI: SSDT 00000000b9e6fe18 001CF (v01 PmRef ApIst 00003000 INTL 20051117) > 2013-03-01T21:58:59.517216+01:00 Minas-Anor kernel: [ 0.065933] ACPI: Dynamic OEM Table Load: > 2013-03-01T21:58:59.517217+01:00 Minas-Anor kernel: [ 0.065936] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117) > 2013-03-01T21:58:59.517219+01:00 Minas-Anor kernel: [ 0.066168] ACPI: SSDT 00000000b9e70f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117) > 2013-03-01T21:58:59.517221+01:00 Minas-Anor kernel: [ 0.066502] ACPI: Dynamic OEM Table Load: > 2013-03-01T21:58:59.517229+01:00 Minas-Anor kernel: [ 0.066505] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117) > 2013-03-01T21:58:59.518163+01:00 Minas-Anor kernel: [ 0.623345] Simple Boot Flag value 0x5 read from CMOS RAM was invalid > 2013-03-01T21:58:59.518177+01:00 Minas-Anor kernel: [ 0.644255] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > 2013-03-01T21:58:59.519051+01:00 Minas-Anor kernel: [ 2.437877] [Firmware Bug]: Invalid critical threshold (0) > 2013-03-01T21:58:59.519159+01:00 Minas-Anor kernel: [ 2.562025] i915: fixme: max PWM is zero > 2013-03-01T21:58:59.519233+01:00 Minas-Anor kernel: [ 13.666163] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared > 2013-03-01T21:58:59.519237+01:00 Minas-Anor kernel: [ 13.738489] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared > 2013-03-01T21:58:59.519272+01:00 Minas-Anor kernel: [ 15.558156] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20120913/utaddress-251) > 2013-03-01T21:58:59.519276+01:00 Minas-Anor kernel: [ 15.558170] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251) > 2013-03-01T21:58:59.519284+01:00 Minas-Anor kernel: [ 15.558205] lpc_ich: Resource conflict(s) found affecting gpio_ich > 2013-03-01T21:58:59.519376+01:00 Minas-Anor kernel: [ 16.096290] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > 2013-03-01T21:58:59.519439+01:00 Minas-Anor kernel: [ 17.353994] sd 6:0:0:0: [sdb] No Caching mode page present > 2013-03-01T21:58:59.519440+01:00 Minas-Anor kernel: [ 17.353999] sd 6:0:0:0: [sdb] Assuming drive cache: write through > 2013-03-01T21:58:59.519447+01:00 Minas-Anor kernel: [ 17.358376] sd 6:0:0:0: [sdb] No Caching mode page present > 2013-03-01T21:58:59.519449+01:00 Minas-Anor kernel: [ 17.358385] sd 6:0:0:0: [sdb] Assuming drive cache: write through > 2013-03-01T21:58:59.519453+01:00 Minas-Anor kernel: [ 17.372379] sd 6:0:0:0: [sdb] No Caching mode page present > 2013-03-01T21:58:59.519454+01:00 Minas-Anor kernel: [ 17.372387] sd 6:0:0:0: [sdb] Assuming drive cache: write through > 2013-03-01T21:59:16.916633+01:00 Minas-Anor kernel: [ 38.740998] audit_printk_skb: 39 callbacks suppressed Needless to say, I have not seen any of that with other openSUSE versions. Should I worry? I see "firmware bug" above, deprecated calls, resource conflicts... :-? -- Cheers/Saludos Carlos E. R. (12.3 Dartmouth test at Minas-Anor -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Network failure when installing 12.3 RC2
by Carlos E. R. 01 Mar '13

01 Mar '13

Hi, I just installed 12.3 RC2 this afternoon, from the DVD. I use the XFCE desktop. Yast during installation asked for the details of my network (wifi), but the test failed, and the details box was empty. The configuration was that of ifup mode. When I finally booted, I could not login as user (xfce). This has an update that corrects it, but I had no network. Had to login as root. YaST network module said that the configuration was handled by network manager, but there was no applet in sight. I switched to ifup mode, and all the data I had entered during config was there. I accepted, then YaST said that it had to install smpppd, and failed because there was no network. This smpppd package should have been installed earlier from the DVD, if it is necesary. It is absurd that to configure network you have to install a package that requires network. Checking, I did have network running, but there was no default route set, so no access to internet. No matter if I clicked to obtain route from dhcp or manually iinYaST, it was ignored. However, a manual restart of "rcnetwork" succeeded and I got Internet. Then, YaST network module also succeeded to install smpppd, and setup default route as well. And the update repaired XFCE access as user, too. Do you want a bugzilla about this? Several people are reporting very similar issues in the fourm. -- Cheers/Saludos Carlos E. R. (12.3 Dartmouth test at Minas-Anor -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

Re: [opensuse-factory] why are raw scripts forced into /bin/sh instead of user's shell (a Suse patch to bash)
by Ruediger Meier 01 Mar '13

01 Mar '13

On Friday 01 March 2013, Carlos E. R. wrote: > El 2013-02-27 a las 22:52 -0600, Larry Finger escribió: > > On 02/27/2013 09:59 PM, Linda Walsh wrote: > > > > Why do you think this is SUSE only. Every distro has a default > > shell, which is what you get when you do not specify the shell to > > use. > > /bin/sh is a link to a shell. Linda, find out which it is in your > system. And note that if you invoke /bin/bash by the /bin/sh link then some bashisms are disabled. To give an example ... rudi@tenfore:~> ls -l /bin/sh lrwxrwxrwx 1 root root 4 2012-11-13 23:17 /bin/sh -> bash rudi@tenfore:~> bash -c ". .bashrc" rudi@tenfore:~> sh -c ". .bashrc" sh: line 0: .: .bashrc: file not found rudi@tenfore:~> cu, Rudi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 6

[opensuse-factory] 400 remote error: /usr/local/sbin/bssign 256
by Andrey Borzenkov 01 Mar '13

01 Mar '13

I have created key with "osc signkey --create", but ... bor@opensuse:~/obs/home:arvidjaar:branches:Base:System/grub2> osc results openSUSE_Factory x86_64 failed* openSUSE_Factory i586 failed* bor@opensuse:~/obs/home:arvidjaar:branches:Base:System/grub2> osc rbl home:arvidjaar:branches:Base:System/grub2 openSUSE_Factory x86_64 400 remote error: /usr/local/sbin/bssign 256 bor@opensuse:~/obs/home:arvidjaar:branches:Base:System/grub2> Well ... this is a real bug to be fixed ... what should I do to make it build? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] 64 bits isos for the RC2
by Alexis "Agemen" 01 Mar '13

01 Mar '13

Hi everyone ! Serge just pointed out on the french IRC channel that links to the 64 bits ISOs may be broken no software.opensuse.org for the RC2. Going on the website, development version, whatever the ISO we choose, we seem to obtain only i586 or i686 files (according to the names at least). Is there any known problem with the build system ? Are the 64 bits images not generated yet ? Should I report a bug ? Thanks in advance for the hint you could give :-) Best wishes, Alexis -- OrbisGIS supporter. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

13 19