January 2008 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Splitting manpages out of package is *fundamentally* wrong
by Joerg Mayer 05 Jan '08

05 Jan '08

Hi, I'd just discuss something that I got hit with: The PolicyKit package no longer contains the manpages - if you want them you need to install PolicyKit-doc as well. IMO, this is a *relly* *really* ... *really* wrong decision, which was obviously made because of *build* reasons: * Sat Aug 11 2007 aj(a)suse.de - Make separate spec file for PolicyKit-doc so that PolicyKit does not require TeX for building. While it may in may cases be OK to not include additional documentation in the base package, the manpages need to stay there - no matter what that means for the build process. ciao Joerg -- Joerg Mayer <jmayer(a)loplof.de> We are stuck with technology when what we really want is just stuff that works. Some say that should read Microsoft instead of technology. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

14 29

[opensuse-factory] opensuse 10.3 hang up in vmware gsx server 3.2.1-19281
by James Li 04 Jan '08

04 Jan '08

SSBpbnN0YWxsIHZtd2FyZSBnc3ggc2VydmVyIDMuMi4xLTE5MjgxIG9uIHNsZXM4IHNwNCgyLjQuMjEtMzA0LWRlZmF1bHQpo6xhbmQgaW5zdGFsbCBvcGVuc3VzZSAxMC4zIG9uIHZtd2FyZS4gDQoNCk9wZW5zdXNlIHdpbGwgaGFuZyB1cCB3aGVuIEkgY29uZmlndXJlIHRoZSBuZXR3b3JrIG9yIGp1c3QgcnVuIGNvbW1hbmQgImlmY29uZmlnIGVodDAgeHh4eHh4Ii4g---------------------------------------------------------------------To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.orgFor additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Flash Update ?
by Günther J. Niederwimmer 04 Jan '08

04 Jan '08

Hello, with the last Mozilla, Flash Update is also not working ? I installed the old again :(. Mozilla don't find the plugin anymore. -- mit freundlichen Grüßen / best Regards Günther J. Niederwimmer --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] USB wake up problem and KDE
by Donn Washburn 03 Jan '08

03 Jan '08

Hey Group; This is 10.3 GM upgraded. I have a Oylumpus SP-550UZ USB digital camera that is viewed as a usb_storage device with a vfat partition.. It is seen by the USB "lsusb" system everytime and SuSE's "hwinfo --usb". KDE3 brings up a selection menu which I think is related to "hal" "lshal" . However, now and then "My Computer" will see it. I have (as root) mounted it with "mount /dev/sdd1 /media/camera". Sometime it works and other times is states the /dev/hdd1 is not a device. The problem is - unknown and I would blame udev rules for the problem but I have been told that the USB system doesn't follow udev. What is the flow of a hwinfo, lsusb, and lsmod (all look good) get to lshal Could this be a USB 1 and 2 issue. -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)windstream.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] No blender on factory
by CyberOrg 03 Jan '08

03 Jan '08

Hi There is no Blender on Factory, but there is blender-doc package, any idea if it is dropped or just an oversight? http://benjiweber.co.uk:8080/webpin/index.jsp?searchTerm=blender&distro=SUS… Blender is going to be slightly more popular as there is a compiz plugin in works that allows users to put any blender model inside the cube. http://forum.compiz-fusion.org/showthread.php?t=5683 Thanks. -J --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

[opensuse-factory] USB problem still
by Donn Washburn 03 Jan '08

03 Jan '08

Hey Group; I have SuSE103 GM and it is upgraded. I have a USB camera that is found every time by the USB system. However, it is not seen as a device /sdd1 if not plugged in while it boots. If it is plugged in during a boot up it is seen. So, "mount /dev/sdd1 /media/camera" works. This happens in runlevel 3 with NO xdm, kdm, gdm, gnome or kde3 started. I would guess it is the lack of a udev / sysfs monitoring daemon. Anyone have a clue to look at. dmesg shows a time stabilizing message from usb-storage -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)windstream.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

Re: [opensuse-factory] Motion, opensuse and ffmpeg needs
by Erik Jakobsen 02 Jan '08

02 Jan '08

Marcus Meissner wrote: > On Wed, Jan 02, 2008 at 12:11:20PM +0100, Erik Jakobsen wrote: > >> Hi. >> >> I would be glad if opensuse could try to include a backward compatible >> ffmpeg version next time. >> because this problem only affects ffmpeg trunk and opensuse version. >> > > We do not include ffmpeg at all. > > Ciao, Marcus > --------------------------------------------------------------------- > To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org > For additional commands, e-mail: opensuse-factory+help(a)opensuse.org > > > Well it exists and can be installed with yast2. But saying not include. We all can make new thins we normmaly "not include" -- Venlig hilsen - Best regards - Erik Jakobsen Licensed HAM-RADIO with the callsign OZ4KK http://www.urbakken.dk Registered Linux user #114875 with http://counter.li.org --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Motion, opensuse and ffmpeg needs
by Erik Jakobsen 02 Jan '08

02 Jan '08

Hi. I would be glad if opensuse could try to include a backward compatible ffmpeg version next time. because this problem only affects ffmpeg trunk and opensuse version. -- Venlig hilsen - Best regards - Erik Jakobsen Licensed HAM-RADIO with the callsign OZ4KK http://www.urbakken.dk Registered Linux user #114875 with http://counter.li.org --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] udev <>. kernel
by Donn Washburn 01 Jan '08

01 Jan '08

Hey Group; My camera problem has to be a udev <> kernel headache. I have plugged in/out the USB camera and "lsusb" finds it every time. However /dev never seems to get a new device. The next sd device should be "sdd" and have only one partition that is vfat. To check for any thing helpful I have looked at "find /sys -name dev" and "cat /sys/block/sdd/size" with no sdd found results. I have written a dev.rules that is 83-camera.rules. udevinfo -a -p /sys/block/sdd and the answer is "no valid sysfs device found" lsusb shows. All ports on this MB are USB 2.0 Bus 001 Device 007: ID 07b4:0109 Olympus Optical Co., Ltd This has got to be a SuSE 103 GM related problem because it works great everytime on my nephews Ubuntu system Laptop. Anyone have a clue as to the flow of the usb->kernel->udev->write devfile. " http://reactivated.net/writing_udev_rules.html#example-camera " seems to have some good examples of udev rules. -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)windstream.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1