June 2007 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Init Scripts broken
by Andras Barna 22 Jun '07

22 Jun '07

HI Yesterday I updated to my alpha 5 to Factory after i rebooted, almost all services started 2 or 3 times, so i tried to remove from them but e.g I run yast2 runlevel or "automatically" it recreates them. for example my /etc/init.d/rc5.d looks like this: total 0 lrwxrwxrwx 1 root root 22 2007-06-15 08:04 S21SuSEfirewall2_setup -> ../SuSEfirewall2_setup lrwxrwxrwx 1 root root 16 2007-06-22 01:16 S04boot.localnet -> ../boot.localnet lrwxrwxrwx 1 root root 13 2007-06-22 01:16 S03boot.clock -> ../boot.clock lrwxrwxrwx 1 root root 15 2007-06-22 01:16 S03boot.cleanup -> ../boot.cleanup lrwxrwxrwx 1 root root 15 2007-06-22 01:16 S02boot.localfs -> ../boot.localfs lrwxrwxrwx 1 root root 16 2007-06-22 01:16 S01boot.rootfsck -> ../boot.rootfsck lrwxrwxrwx 1 root root 16 2007-06-22 01:16 K21boot.rootfsck -> ../boot.rootfsck lrwxrwxrwx 1 root root 15 2007-06-22 01:16 K20boot.localfs -> ../boot.localfs lrwxrwxrwx 1 root root 13 2007-06-22 01:16 K19boot.clock -> ../boot.clock lrwxrwxrwx 1 root root 15 2007-06-22 01:16 K19boot.cleanup -> ../boot.cleanup lrwxrwxrwx 1 root root 16 2007-06-22 01:16 K18boot.localnet -> ../boot.localnet lrwxrwxrwx 1 root root 10 2007-06-22 01:16 S13apache2 -> ../apache2 lrwxrwxrwx 1 root root 6 2007-06-22 01:16 S12xdm -> ../xdm lrwxrwxrwx 1 root root 10 2007-06-22 01:16 S12postfix -> ../postfix lrwxrwxrwx 1 root root 7 2007-06-22 01:16 S11sshd -> ../sshd lrwxrwxrwx 1 root root 9 2007-06-22 01:16 S11splash -> ../splash lrwxrwxrwx 1 root root 6 2007-06-22 01:16 S11ntp -> ../ntp lrwxrwxrwx 1 root root 8 2007-06-22 01:16 S11mysql -> ../mysql lrwxrwxrwx 1 root root 13 2007-06-22 01:16 S11lm_sensors -> ../lm_sensors lrwxrwxrwx 1 root root 6 2007-06-22 01:16 S11kbd -> ../kbd lrwxrwxrwx 1 root root 15 2007-06-22 01:16 S11irq_balancer -> ../irq_balancer lrwxrwxrwx 1 root root 12 2007-06-22 01:16 S11alsasound -> ../alsasound lrwxrwxrwx 1 root root 15 2007-06-22 01:16 S09splash_early -> ../splash_early lrwxrwxrwx 1 root root 10 2007-06-22 01:16 S09dovecot -> ../dovecot lrwxrwxrwx 1 root root 9 2007-06-22 01:16 S08syslog -> ../syslog lrwxrwxrwx 1 root root 12 2007-06-22 01:16 S08saslauthd -> ../saslauthd lrwxrwxrwx 1 root root 10 2007-06-22 01:16 S07network -> ../network lrwxrwxrwx 1 root root 12 2007-06-22 01:16 S06haldaemon -> ../haldaemon lrwxrwxrwx 1 root root 13 2007-06-22 01:16 S05policykitd -> ../policykitd lrwxrwxrwx 1 root root 11 2007-06-22 01:16 S04earlygdm -> ../earlygdm lrwxrwxrwx 1 root root 21 2007-06-22 01:16 S03SuSEfirewall2_init -> ../SuSEfirewall2_init lrwxrwxrwx 1 root root 9 2007-06-22 01:16 S03resmgr -> ../resmgr lrwxrwxrwx 1 root root 9 2007-06-22 01:16 S03random -> ../random lrwxrwxrwx 1 root root 10 2007-06-22 01:16 S03hddtemp -> ../hddtemp lrwxrwxrwx 1 root root 14 2007-06-22 01:16 S03earlysyslog -> ../earlysyslog lrwxrwxrwx 1 root root 7 2007-06-22 01:16 S03dbus -> ../dbus lrwxrwxrwx 1 root root 10 2007-06-22 01:16 K19hddtemp -> ../hddtemp lrwxrwxrwx 1 root root 7 2007-06-22 01:16 K19dbus -> ../dbus lrwxrwxrwx 1 root root 13 2007-06-22 01:16 K17policykitd -> ../policykitd lrwxrwxrwx 1 root root 12 2007-06-22 01:16 K16haldaemon -> ../haldaemon lrwxrwxrwx 1 root root 10 2007-06-22 01:16 K15network -> ../network lrwxrwxrwx 1 root root 6 2007-06-22 01:16 K11ntp -> ../ntp You can see that there's 2 prefixes It's my "fault" (imho not:)) or something is broken? Regards --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

[opensuse-factory] install from factory missing libstdc++
by Günther J. Niederwimmer 21 Jun '07

21 Jun '07

Hello, by a install from factory, libstdc++.so.6 is in the moment missing from YaST2 ? but we have two libstdc++, 41 and 42 on factory ? -- mit freundlichen Grüssen / best Regards Günther J. Niederwimmer --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

7 7

[opensuse-factory] ppc?
by Peter Czanik 21 Jun '07

21 Jun '07

Hello, Any news, when PPC factory will be updated? I mean not just little bits, like adding blender and stuff, but fully re-synced, like i386 yesterday. Bye, CzP --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] k3b and 4 GB limit for UDF
by Silviu Marin-Caea 21 Jun '07

21 Jun '07

If you try to add a file larger than 4 GB with k3b 1.0.1 it gives and error saying that it's not possible. UDF does not have such a limitation. The problem was with mkisofs. But the SVN version of k3b uses genisofs that does not have this problem. Therefore k3b from SVN can write files >4 GB. I don't know when k3b 1.0.2 will be released, but in case this will happen after 10.3 enters beta phase, will it still be possible to get the new k3b in? Perhaps I'm worrying too soon and it will all work out by itself. :-) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 7

[opensuse-factory] MTP devices and UDEV config?
by Birger Kollstrand 20 Jun '07

20 Jun '07

Hi, I just checked on 10.3 alpha5 and can not see that there is any udev configuration for MTP devices in /etc/udev/rules.d libmtp is in, but not the udev config file. Is this intentional or a bug? It is the same on 10.2 http://amarok.kde.org/wiki/Media_Device:MTP It would be good if these devices also was autodetected as the Creative players are quite good devices. Regards Birger --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Ant's xmlvalidate not found
by Jochen+opensuse-factory＠Hayek.name 20 Jun '07

20 Jun '07

I have a small build-valid.xml (from http://www.xml.com/pub/a/2003/01/29/ant.html) $ cat build-valid.xml <?xml version="1.0"?> <project default="valid"> <target name="valid"> <xmlvalidate file="date.xml"/> </target> </project> and Ant from factory does not find xmlvalidate: $ ant -f build-valid.xml Buildfile: build-valid.xml valid: BUILD FAILED /home/jochen_hayek/Computers/Software/Build_Management/XML_Pipelining_with_Ant/build-valid.xml:5: Could not create task or type of type: xmlvalidate. Ant could not find the task or a class this task relies upon. This is common and has a number of causes; the usual solutions are to read the manual pages then download and install needed JAR files, or fix the build file: [...] Total time: 1 second Looks sad, doesn't it? And so am I. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 1

[opensuse-factory] udev-112-3 and new rules files
by Chema 20 Jun '07

20 Jun '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all: I create a new rules file for udev,but it doesn't seems works fine The rules file is: BUS=="usb", KERNEL=="sd*", ATTRS{Manufacturer}=="Apple", SYMLINK+="ipod%n", OPTIONS+="all_partitions", ACTION=="add" , RUN+="/tmp/prueba.sh" Well /tmp/prueba.sh is a file that mount the nano ipod on a special dir... I try to reload udev with udevcontrol reload_rules and without result. where I have been mistaken? Regards - -- Chema Ollés Usuario Linux: #198057 openSUSE 10.3 (i586) Alpha5 kernel-2.6.22-rc4-git3-2-default #1 SMP 2007/06/12 15:00:04 UTC i686 GNU/Linux -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (GNU/Linux) iD8DBQFGePftm5lTdgS9W18RAiFqAJ4yP6U9qVfp/XOeotv7RsyODH9v2ACgpoJl R8Vp13soCnp0ngWNinSY2zc= =iEAt -----END PGP SIGNATURE----- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Strg + Alt + F1
by Günther J. Niederwimmer 20 Jun '07

20 Jun '07

Hello, Bug or Featcher ? I can't change to console on my system, Alpha 5 ? -- mit freundlichen Grüssen / best Regards Günther J. Niederwimmer --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] new cd1 gnome
by James Tremblay 19 Jun '07

19 Jun '07

Is there some group I can join to discuss the new cd1 layout and package list? -- James Tremblay Director of Technology Newmarket School District Newmarket,NH http://en.opensuse.org/Education "let's make a difference" --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] Re: [opensuse-packaging] gpg is dead. Long live gpg
by Richard Guenther 19 Jun '07

19 Jun '07

On Tue, 19 Jun 2007, Marcus Rueckert wrote: > On 2007-06-19 13:47:51 +0200, Klaus Singvogel wrote: > > Therefore we are doing a switch in openSUSE 10.3 RSN: > > - gpg will be dropped > > - gpg2 will be renamed to gpg > > why renaming it? > to fullfil old Requires a simple: > > Provides: gpg = %{version}-%{release} > > would be enough. and everybody would know that the gpg package is dead > and that we only ship gpg2 now. imho this rename would be useless. I agree. Richard. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0