Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package slurm for openSUSE:Factory checked in at 2023-03-01 16:14:17 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/slurm (Old) and /work/SRC/openSUSE:Factory/.slurm.new.31432 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "slurm" Wed Mar 1 16:14:17 2023 rev:83 rq:1068320 version:23.02.0 Changes: -------- --- /work/SRC/openSUSE:Factory/slurm/slurm.changes 2023-02-09 16:23:31.054808967 +0100 +++ /work/SRC/openSUSE:Factory/.slurm.new.31432/slurm.changes 2023-03-01 16:14:44.838815517 +0100 @@ -1,0 +2,241 @@ +Mon Feb 20 20:45:59 UTC 2023 - Egbert Eich <eich@suse.com> + +- updated to 23.02.0 + * Highlights + + slurmctld - Add new RPC rate limiting feature. This is enabled through + SlurmctldParameters=rl_enable, otherwise disabled by default. + + Make scontrol reconfigure and sending a SIGHUP to the slurmctld behave + the same. If you were using SIGHUP as a 'lighter' scontrol reconfigure + to rotate logs please update your scripts to use SIGUSR2 instead. + + Change cloud nodes to show by default. PrivateData=cloud is no longer + needed. + + sreport - Count planned (FKA reserved) time for jobs running in + IGNORE_JOBS reservations. Previously was lumped into IDLE time. + + job_container/tmpfs - Support running with an arbitrary list of private + mount points (/tmp and /dev/shm are the default, but not required). + + job_container/tmpfs - Set more environment variables in InitScript. + + Make all cgroup directories created by Slurm owned by root. This was the + behavior in cgroup/v2 but not in cgroup/v1 where by default the step + directories ownership were set to the user and group of the job. + + accounting_storage/mysql - change purge/archive to calculate record ages + based on end time, rather than start or submission times. + + job_submit/lua - add support for log_user() from slurm_job_modify(). + + Run the following scripts in slurmscriptd instead of slurmctld: + ResumeProgram, ResumeFailProgram, SuspendProgram, ResvProlog, ResvEpilog, + and RebootProgram (only with SlurmctldParameters=reboot_from_controller). + + Only permit changing log levels with 'srun --slurmd-debug' by root + or SlurmUser. + + slurmctld will fatal() when reconfiguring the job_submit plugin fails. + + Add PowerDownOnIdle partition option to power down nodes after nodes + become idle. + + Add "[jobid.stepid]" prefix from slurmstepd and "slurmscriptd" prefix + from slurmcriptd to Syslog logging. Previously was only happening when + logging to a file. + + Add purge and archive functionality for job environment and job batch + script records. + + Extend support for Include files to all "configless" client commands. + + Make node weight usable for powered down and rebooting nodes. + + Removed 'launch' plugin. + + Add "Extra" field to job to store extra information other than a comment. + + Add usage gathering for AMD (requires ROCM 5.5+) and NVIDIA gpus. + + Add job's allocated nodes, features, oversubscribe, partition, and + reservation to SLURM_RESUME_FILE output for power saving. + + Automatically create directories for stdout/stderr output files. Paths + may use %j and related substitution characters as well. + + Add --tres-per-task to salloc/sbatch/srun. + + Allow nodefeatures plugin features to work with cloud nodes. + e.g. - Powered down nodes have no active changeable features. + - Nodes can't be changed to other active features until powered down. + - Active changeable features are reset/cleared on power down. + + Make slurmstepd cgroups constrained by total configured memory from + slurm.conf (NodeName=<> RealMemory=#) instead of total physical memory. + + node_features/helpers - add support for the OR and parentheses operators + in a --constraint expression. + + slurmctld will fatal() when [Prolog|Epilog]Slurmctld are defined but + are not executable. + + Validate node registered active features are a super set of node's + currently active changeable features. + + On clusters without any PrologFlags options, batch jobs with failed + prologs no longer generate an output file. + + Add SLURM_JOB_START_TIME and SLURM_JOB_END_TIME environment variables. + + Add SuspendExcStates option to slurm.conf to avoid suspending/powering + down specific node states. + + Add support for DCMI power readings in IPMI plugin. + + slurmrestd served /slurm/v0.0.39 and /slurmdb/v0.0.39 endpoints had major + changes from prior versions. Almost all schemas have been renamed and + modified. Sites using OpenAPI Generator clients are highly suggested to + upgrade to to using atleast version 6.x due to limitations with prior + versions. + + Allow for --nodelist to contain more nodes than required by --nodes. + + Rename "nodes" to "nodes_resume" in SLURM_RESUME_FILE job output. + + Rename "all_nodes" to "all_nodes_resume" in SLURM_RESUME_FILE output. + + Add jobcomp/kafka plugin. + + Add new PreemptParameters=reclaim_licenses option which will allow higher + priority jobs to preempt jobs to free up used licenses. (This is only + enabled for with PreemptModes of CANCEL and REQUEUE, as Slurm cannot + guarantee suspended jobs will release licenses correctly.) + + hpe/slingshot - add support for the instant-on feature. + + Add ability to update SuspendExc* parameters with scontrol. + + Add ability to restore SuspendExc* parameters on restart with slurmctld + -R option. + + Add ability to clear a GRES specification by setting it to "0" via + 'scontrol update job'. + + Add SLURM_JOB_OVERSUBSCRIBE environment variable for Epilog, Prolog, + EpilogSlurmctld, PrologSlurmctld, and mail ouput. + + System node down reasons are appended to existing reasons, separated + by ':'. + + New command scrun has been added. scrun acts as an Open Container + Initiative (OCI) runtime proxy to run containers seamlessly via Slurm. + + Fixed GpuFreqDef option. When set in slurm.conf, it will be used if + --gpu-freq was not explicitly set by the job step. + * Configuration Changes + + job_container.conf - Added "Dirs" option to list desired private mount + points. + + node_features plugins - invalid users specified for AllowUserBoot will + now result in fatal() rather than just an error. + + Deprecate AllowedKmemSpace, ConstrainKmemSpace, MaxKmemPercent, and + MinKmemSpace. + + Allow jobs to queue even if the user is not in AllowGroups when + EnforcePartLimits=no is set. This ensures consistency for all the + Partition access controls, and matches the documented behavior for + EnforcePartLimits. + + Add InfluxDBTimeout parameter to acct_gather.conf. + + job_container/tmpfs - add support for expanding %h and %n in BasePath. + + slurm.conf - Removed SlurmctldPlugstack option. + + Add new SlurmctldParameters=validate_nodeaddr_threads=<number> option to + allow concurrent hostname resolution at slurmctld startup. + + Add new AccountingStoreFlags=job_extra option to store a job's extra field + in the database. + + Add new "defer_batch" option to SchedulerParameters to only defer + scheduling for batch jobs. + + Add new DebugFlags option 'JobComp' to replace 'Elasticsearch'. + + Add configurable job requeue limit parameter - MaxBatchRequeue - in + slurm.conf to permit changes from the old hard-coded value of 5. + + helpers.conf - Allow specification of node specific features. + + helpers.conf - Allow many features to one helper script. + + job_container/tmpfs - Add "Shared" option to support shared namespaces. + This allows autofs to work with the job_container/tmpfs plugin when + enabled. + + acct_gather.conf - Added EnergyIPMIPowerSensors=Node=DCMI and + Node=DCMI_ENHANCED. + + Add new "getnameinfo_cache_timeout=<number>" option to + CommunicationParameters to adjust or disable caching the results of + getnameinfo(). + + Add new PrologFlags=ForceRequeueOnFail option to automatically requeue + batch jobs on Prolog failures regardless of the job --requeue setting. + + Add HealthCheckNodeState=NONDRAINED_IDLE option. + + Add 'explicit' to Flags in gres.conf. This makes it so the gres is not + automatically added to a job's allocation when --exclusive is used. Note + that this is a per-node flag. + + Moved the "preempt_" options from SchedulerParameters to + PreemptParameters, and dropped the prefix from the option names. + (The old options will still be parsed for backwards compatibility, + but are now undocumented.) + + Add LaunchParameters=ulimit_pam_adopt, which enables setting RLIMIT_RSS + in adopted processes. + + Update SwitchParameters=job_vni to enable/disable creating job VNIs + for all jobs, or when a user requests them. + + Update SwitchParameters=single_node_vni to enable/disable creating + single node vnis for all jobs, or when a user requests them. + + Add ability to preserve SuspendExc* parameters on reconfig with + ReconfigFlags=KeepPowerSaveSettings. + + slurmdbd.conf - Add new AllResourcesAbsolute to force all new resources + to be created with the Absolute flag. + + topology/tree - Add new TopologyParam=SwitchAsNodeRank option to reorder + nodes based on switch layout. This can be useful if the naming convention + for the nodes does not natually map to the network topology. + + Removed the default setting for GpuFreqDef. If unset, no attempt to change + the GPU frequency will be made if --gpu-freq is not set for the step. + * Command Changes + + sacctmgr - no longer force updates to the AdminComment, Comment, or + SystemComment to lower-case. + + sinfo - Add -F/--future option to sinfo to display future nodes. + + sacct - Rename 'Reserved' field to 'Planned' to match sreport and the + nomenclature of the 'Planned' node. + + scontrol - advanced reservation flag MAINT will no longer replace nodes, + similar to STATIC_ALLOC + + sbatch - add parsing for #PBS -d and #PBS -w. + + scontrol show assoc_mgr will show username(uid) instead of uid in + QoS section. + + Add strigger --draining and -R/--resume options. + + Change --oversubscribe and --exclusive to be mutually exclusive for + job submission. Job submission commands will now fatal if both are set. + Previously, these options would override each other, with the last one + in the job submission command taking effect. + + scontrol - Requested TRES and allocated TRES will now always be printed + when showing jobs, instead of one TRES output that was either the + requested or allocated. + + srun --ntasks-per-core now applies to job and step allocations. Now, + use of --ntasks-per-core=1 implies --cpu-bind=cores and + --ntasks-per-core>1 implies --cpu-bind=threads. + + salloc/sbatch/srun - Check and abort if ntasks-per-core > + threads-per-core. + + scontrol - Add ResumeAfter=<secs> option to "scontrol update nodename=". + + Add a new "nodes=" argument to scontrol setdebug to allow the debug + level on the slurmd processes to be temporarily altered. + + Add a new "nodes=" argument to "scontrol setdebugflags" as well. + + Make it so scrontab prints client-side the job_submit() err_msg (which + can be set i.e. by using the log_user() function for the lua plugin). + + scontrol - Reservations will not be allowed to have STATIC_ALLOC or + MAINT flags and REPLACE[_DOWN] flags simultaneously. + + scontrol - Reservations will only accept one reoccurring flag when + being created or updated. + + scontrol - A reservation cannot be updated to be reoccurring if it is + already a floating reservation. + + squeue - removed unused '%s' and 'SelectJobInfo' formats. + + squeue - align print format for exit and derived codes with that of + other components (<exit_status>:<signal_number>). + + sacct - Add --array option to expand job arrays and display array + tasks on separate lines. + + Partial support for '--json' and '--yaml' formated outputs have been + implemented for sacctmgr, sdiag, sinfo, squeue, and scontrol. The + resultant data ouput will be filtered by normal command arguments. + Formatting arguments will continue to be ignored. + + salloc/sbatch/srun - extended the --nodes syntax to allow for a list + of valid node counts to be allocated to the job. This also supports + a "step count" value (e.g., --nodes=20-100:20 is equivalent to + --nodes=20,40,60,80,100) which can simplify the syntax when the job ++++ 47 more lines (skipped) ++++ between /work/SRC/openSUSE:Factory/slurm/slurm.changes ++++ and /work/SRC/openSUSE:Factory/.slurm.new.31432/slurm.changes Old: ---- slurm-22.05.5.tar.bz2 New: ---- slurm-23.02.0.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ slurm.spec ++++++ --- /var/tmp/diff_new_pack.gBWu6G/_old 2023-03-01 16:14:45.502818950 +0100 +++ /var/tmp/diff_new_pack.gBWu6G/_new 2023-03-01 16:14:45.506818971 +0100 @@ -17,10 +17,12 @@ # Check file META in sources: update so_version to (API_CURRENT - API_AGE) -%define so_version 38 -%define ver 22.05.5 -%define _ver _22_05 +%define so_version 39 +%define ver 23.02.0 +%define _ver _23_02 +#%%define rc_v 0rc1 %define dl_ver %{ver} +#%%define dl_ver 23-02-0%{?rc_v:-%rc_v} # so-version is 0 and seems to be stable %define pmi_so 0 %define nss_so 2 @@ -54,6 +56,9 @@ %if 0%{?sle_version} == 150300 || 0%{?sle_version} == 150400 %define base_ver 2011 %endif +%if 0%{?sle_version} == 150500 +%define base_ver 2302 +%endif %if 0%{?suse_version} >= 1500 %define have_sysuser 1 @@ -148,6 +153,7 @@ Group: Productivity/Clustering/Computing URL: https://www.schedmd.com Source: https://download.schedmd.com/slurm/%{pname}-%{dl_ver}.tar.bz2 +#Source: https://github.com/SchedMD/slurm/archive/refs/tags/%{pname}-%{dl_ver}.tar.gz Source1: slurm-rpmlintrc Source10: https://raw.githubusercontent.com/openSUSE/hpc/10c105e/files/slurm/slurmd.xm... Source11: https://raw.githubusercontent.com/openSUSE/hpc/10c105e/files/slurm/slurmctld... @@ -226,6 +232,7 @@ %{?have_sysuser:BuildRequires: sysuser-tools} %{?systemd_ordering} BuildRequires: dejagnu +BuildRequires: zlib-devel BuildRequires: pkgconfig(dbus-1) BuildRequires: pkgconfig(systemd) %else @@ -638,9 +645,7 @@ %prep %setup -q -n %{pname}-%{dl_ver} %patch0 -p1 -#%%patch1 -p1 %patch2 -p1 -#%%patch3 -p1 %patch10 -p1 %patch11 -p1 %patch12 -p1 @@ -1209,8 +1214,8 @@ %files doc %{?comp_at} -%dir %{_datadir}/doc/%{pname}-%{dl_ver} -%{_datadir}/doc/%{pname}-%{dl_ver}/* +%dir %{_datadir}/doc/%{pname}-%{version}%{?rc_v:-%rc_v} +%{_datadir}/doc/%{pname}-%{version}%{?rc_v:-%rc_v}/* %files webdoc %{?comp_at} @@ -1302,6 +1307,7 @@ %{_libdir}/slurm/acct_gather_profile_none.so %{_libdir}/slurm/burst_buffer_lua.so %{?have_json_c:%{_libdir}/slurm/burst_buffer_datawarp.so} +%{_libdir}/slurm/data_parser_v0_0_39.so %{_libdir}/slurm/cgroup_v1.so %if 0%{?suse_version} >= 1500 %{_libdir}/slurm/cgroup_v2.so @@ -1335,7 +1341,6 @@ %{_libdir}/slurm/job_submit_partition.so %{_libdir}/slurm/job_submit_require_timelimit.so %{_libdir}/slurm/job_submit_throttle.so -%{_libdir}/slurm/launch_slurm.so %{_libdir}/slurm/libslurm_pmi.so %{_libdir}/slurm/mcs_account.so %{_libdir}/slurm/mcs_group.so @@ -1369,7 +1374,6 @@ %{_libdir}/slurm/serializer_url_encoded.so %{_libdir}/slurm/serializer_yaml.so %{_libdir}/slurm/site_factor_none.so -%{_libdir}/slurm/slurmctld_nonstop.so %{_libdir}/slurm/switch_none.so %{_libdir}/slurm/task_affinity.so %{_libdir}/slurm/task_cgroup.so @@ -1428,13 +1432,12 @@ %{?comp_at} %{_sbindir}/slurmrestd %{_mandir}/man8/slurmrestd.* +%{_libdir}/slurm/openapi_dbv0_0_39.so +%{_libdir}/slurm/openapi_v0_0_39.so %{_libdir}/slurm/openapi_dbv0_0_38.so %{_libdir}/slurm/openapi_v0_0_38.so %{_libdir}/slurm/openapi_dbv0_0_37.so %{_libdir}/slurm/openapi_v0_0_37.so -%{_libdir}/slurm/openapi_dbv0_0_36.so -#%{_libdir}/slurm/openapi_v0_0_35.so -%{_libdir}/slurm/openapi_v0_0_36.so #%{_libdir}/slurm/rest_auth_jwt.so %{_libdir}/slurm/rest_auth_local.so %endif @@ -1445,7 +1448,9 @@ %{_sbindir}/slurmstepd # bsc#1153095 %{_bindir}/srun +%{_bindir}/scrun %{_mandir}/man1/srun.1* +%{_mandir}/man1/scrun.1* %{_mandir}/man8/slurmd.* %{_mandir}/man8/slurmstepd* %if 0%{?with_systemd} @@ -1506,6 +1511,7 @@ %{_libdir}/slurm/select_cray_aries.so %{_libdir}/slurm/switch_cray_aries.so %{_libdir}/slurm/task_cray_aries.so +%{_libdir}/slurm/proctrack_cray_aries.so %{_libdir}/slurm/mpi_cray_shasta.so %if 0%{?have_json_c} %{_libdir}/slurm/node_features_knl_cray.so @@ -1518,7 +1524,7 @@ %dir %attr(-, %slurm_u, %slurm_u) /srv/slurm-testsuite %attr(-, root, root) %{_datadir}/%{name} %if 0%{?sle_version} == 120200 || 0%{?suse_version} >= 1550 -%dir %{_pam_secconfdir}/limits.d +%dir %attr(-, root, root) %{_pam_secconfdir}/limits.d %endif %doc testsuite/expect/README %doc %{basename: %{S:21}} ++++++ Fix-test-38.11.patch ++++++ --- /var/tmp/diff_new_pack.gBWu6G/_old 2023-03-01 16:14:45.546819178 +0100 +++ /var/tmp/diff_new_pack.gBWu6G/_new 2023-03-01 16:14:45.550819198 +0100 @@ -1,9 +1,8 @@ From: Egbert Eich <eich@suse.com> -Date: Wed Jun 15 08:41:45 2022 +0200 +Date: Mon Feb 20 21:35:37 2023 +0100 Subject: Fix test 38.11 Patch-mainline: Not yet -Git-repo: https://github.com/SchedMD/slurm -Git-commit: 235768790cb2e9cf011e6d08116a468ebec71582 +Git-commit: 80c7c8b897fde0c025f695b8301f4cbbc605581d References: Signed-off-by: Egbert Eich <eich@suse.com> @@ -12,20 +11,20 @@ testsuite/expect/test38.11 | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/testsuite/expect/test38.11 b/testsuite/expect/test38.11 -index d2c07d60c7..bf5d10ecc9 100755 +index 3d2954f..89e5333 100755 --- a/testsuite/expect/test38.11 +++ b/testsuite/expect/test38.11 -@@ -99,9 +99,9 @@ make_bash_script $script " - $srun -N1 -n1 --het-group=0 mkdir -p $tmp_dir/$node1 - $srun -N1 -n1 --het-group=1 mkdir -p $tmp_dir/$node2 +@@ -83,9 +83,9 @@ if {$het_job_id == 0} { + run_command -fail "$srun -N1 -n1 --het-group=0 mkdir -p $tmp_dir" + run_command -fail "$srun -N1 -n1 --het-group=1 mkdir -p $tmp_dir" --$sbcast -f -j$het_job_id $srun $tmp_dir/file --$sbcast -f -j${het_job_id}+0 $srun $tmp_dir/$node1/file_comp0 --$sbcast -f -j${het_job_id}+1 $srun $tmp_dir/$node2/file_comp1 -+$sbcast -f -j\$SLURM_JOBID $srun $tmp_dir/file -+$sbcast -f -j\$SLURM_JOBID $srun $tmp_dir/$node1/file_comp0 -+$sbcast -f -j\$((SLURM_JOBID+1)) $srun $tmp_dir/$node2/file_comp1 +-run_command -fail "$sbcast -f --jobid=$het_job_id $srun $tmp_dir/file" +-run_command -fail "$sbcast -f --jobid=${het_job_id}+0 $srun $tmp_dir/file_comp0" +-run_command -fail "$sbcast -f --jobid=${het_job_id}+1 $srun $tmp_dir/file_comp1" ++run_command -fail "$sbcast -f --jobid=\$SLURM_JOBID $srun $tmp_dir/file" ++run_command -fail "$sbcast -f --jobid=\$SLURM_JOBID $srun $tmp_dir/file_comp0" ++run_command -fail "$sbcast -f --jobid=\$((SLURM_JOBID+1)) $srun $tmp_dir/file_comp1" - echo -n \"\nChecking node 1: \" - $srun -Q -N1 -n1 --het-group=1 ls $tmp_dir/file + subtest {![run_command_status "$srun -N1 -n1 --het-group=0 ls $tmp_dir/file"]} "Verify main file is in node of component 0" + subtest {![run_command_status "$srun -N1 -n1 --het-group=1 ls $tmp_dir/file"]} "Verify main file is in node of component 1" ++++++ pam_slurm-Initialize-arrays-and-pass-sizes.patch ++++++ --- /var/tmp/diff_new_pack.gBWu6G/_old 2023-03-01 16:14:45.602819467 +0100 +++ /var/tmp/diff_new_pack.gBWu6G/_new 2023-03-01 16:14:45.606819487 +0100 @@ -1,22 +1,25 @@ -From: Sebastian Krahmer <krahmer@suse.com> -Date: Thu Feb 2 09:49:38 2017 +0100 -Subject: [PATCH]pam_slurm: Initialize arrays and pass sizes -Git-repo: https://github.com/SchedMD/slurm -Git-commit: fbfbb90f6a2e7f134220991ed3263894ba365411 +From: Egbert Eich <eich@suse.com> +Date: Mon Feb 20 21:29:27 2023 +0100 +Subject: pam_slurm: Initialize arrays and pass sizes +Patch-mainline: Not yet +Git-commit: 5feca5c29d4e820dafd8d34c0343944b28890902 References: bsc#1007053 -Signed-off-by: Egbert Eich <eich@suse.de> PAM is security critical: - clear arrays - ensure strings are NULL-terminated. Signed-off-by: Egbert Eich <eich@suse.com> +Originally-from: Sebastian Krahmer <krahmer@suse.com> +Signed-off-by: Egbert Eich <eich@suse.de> --- - -diff -Nrua a/contribs/pam/pam_slurm.c b/contribs/pam/pam_slurm.c + contribs/pam/pam_slurm.c | 20 +++++++++++--------- + 1 file changed, 11 insertions(+), 9 deletions(-) +diff --git a/contribs/pam/pam_slurm.c b/contribs/pam/pam_slurm.c +index 20d21a9..363b6ae 100644 --- a/contribs/pam/pam_slurm.c +++ b/contribs/pam/pam_slurm.c -@@ -266,9 +266,9 @@ +@@ -266,9 +266,9 @@ static int _gethostname_short (char *name, size_t len) { int error_code, name_len; @@ -28,7 +31,7 @@ if (error_code) return error_code; -@@ -296,13 +296,13 @@ +@@ -296,13 +296,13 @@ static int _slurm_match_allocation(uid_t uid) { int authorized = 0, i; @@ -37,14 +40,14 @@ char *nodename = NULL; job_info_msg_t * msg; - slurm_conf_init(NULL); + slurm_init(NULL); - if (_gethostname_short(hostname, sizeof(hostname)) < 0) { + if (_gethostname_short(hostname, sizeof(hostname) - 1) < 0) { _log_msg(LOG_ERR, "gethostname: %m"); return 0; } -@@ -425,7 +425,7 @@ +@@ -425,7 +425,7 @@ _send_denial_msg(pam_handle_t *pamh, struct _options *opts, */ extern void libpam_slurm_init (void) { @@ -53,7 +56,7 @@ if (slurm_h) return; -@@ -433,10 +433,10 @@ +@@ -433,10 +433,10 @@ extern void libpam_slurm_init (void) /* First try to use the same libslurm version ("libslurm.so.24.0.0"), * Second try to match the major version number ("libslurm.so.24"), * Otherwise use "libslurm.so" */ @@ -66,7 +69,7 @@ _log_msg (LOG_ERR, "Unable to write libslurmname\n"); } else if ((slurm_h = dlopen(libslurmname, RTLD_NOW|RTLD_GLOBAL))) { return; -@@ -445,8 +445,10 @@ +@@ -445,8 +445,10 @@ extern void libpam_slurm_init (void) libslurmname, dlerror ()); } ++++++ slurm-22.05.5.tar.bz2 -> slurm-23.02.0.tar.bz2 ++++++ /work/SRC/openSUSE:Factory/slurm/slurm-22.05.5.tar.bz2 /work/SRC/openSUSE:Factory/.slurm.new.31432/slurm-23.02.0.tar.bz2 differ: char 11, line 1