[opensuse-buildservice] Expansion error, which I can't explain. :-(

older
[opensuse-buildservice] Five Easy...

Stefan Dirsch

6 May 2008 6 May '08

14:47

Hi I'm getting expansion errors, I cannot explain. Once I understand them I would like to fix the issue. Project: CrossToochain:avr Package: avr-libc/avr-gdb Repository: openSUSE_Factory/i586 "Nothing provides cross-avr-gcc" But you can see that cross-avr-gcc has been built successfully in the same project!?! See also https://build.opensuse.org/project/monitor?project=CrossToolchain%3Aavr Any help would be appreciated. Thanks, Stefan Public Key available ------------------------------------------------------ Stefan Dirsch (Res. & Dev.) SUSE LINUX Products GmbH Tel: 0911-740 53 0 Maxfeldstraße 5 FAX: 0911-740 53 479 D-90409 Nürnberg http://www.suse.de Germany ----------------------------------------------------------------- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) ----------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-buildservice+help@opensuse.org

Show replies by date

Dominique Leuenberger

6 May 6 May

14:47

New subject: [opensuse-buildservice] Expansion error, which I can't explain. :-(

...

...
...
On 06.05.2008 at 17:47, Stefan Dirsch wrote: Hi

I'm getting expansion errors, I cannot explain. Once I understand them I would like to fix the issue.

Project: CrossToochain:avr Package: avr-libc/avr-gdb Repository: openSUSE_Factory/i586

"Nothing provides cross-avr-gcc"

But you can see that cross-avr-gcc has been built successfully in the same project!?! See also

https://build.opensuse.org/project/monitor?project=CrossToolchain%3Aavr

Actually, the package that was built is called cross-avr-gcc43. Most likely for 'non-factory' releases, there is a Substitute replacing it correctly. Maybe this is a hint? Dominique --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-buildservice+help@opensuse.org

Stefan Dirsch

15:03

New subject: [opensuse-buildservice] Expansion error, which I can't explain. :-(

On Tue, May 06, 2008 at 04:47:14PM +0200, Dominique Leuenberger wrote:

...

...
...
...
On 06.05.2008 at 17:47, Stefan Dirsch wrote: Hi

I'm getting expansion errors, I cannot explain. Once I understand them I would like to fix the issue.

Project: CrossToochain:avr Package: avr-libc/avr-gdb Repository: openSUSE_Factory/i586

"Nothing provides cross-avr-gcc"

But you can see that cross-avr-gcc has been built successfully in the same project!?! See also

https://build.opensuse.org/project/monitor?project=CrossToolchain%3Aavr

Actually, the package that was built is called cross-avr-gcc43.

Indeed. But why? The resulted package should be called cross-avr-gcc. Best regards, Stefan Public Key available ------------------------------------------------------ Stefan Dirsch (Res. & Dev.) SUSE LINUX Products GmbH Tel: 0911-740 53 0 Maxfeldstraße 5 FAX: 0911-740 53 479 D-90409 Nürnberg http://www.suse.de Germany ----------------------------------------------------------------- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) ----------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-buildservice+help@opensuse.org

Dominique Leuenberger

15:03

New subject: [opensuse-buildservice] Expansion error, which I can'texplain. :-(

...

...
...
On 06.05.2008 at 18:03, Stefan Dirsch wrote: On Tue, May 06, 2008 at 04:47:14PM +0200, Dominique Leuenberger wrote:

...
...
On 06.05.2008 at 17:47, Stefan Dirsch wrote: Hi

I'm getting expansion errors, I cannot explain. Once I understand them I would like to fix the issue.

Project: CrossToochain:avr Package: avr-libc/avr-gdb Repository: openSUSE_Factory/i586

"Nothing provides cross-avr-gcc"

But you can see that cross-avr-gcc has been built successfully in the same project!?! See also

https://build.opensuse.org/project/monitor?project=CrossToolchain%3Aavr

Actually, the package that was built is called cross-avr-gcc43.

Indeed. But why? The resulted package should be called cross-avr-gcc.

I would guess that's the Name: tag in the spec file. In OBS, the package does not have to be called the same as what you put inside. If it should be different, the Factory maintainer of the package might be the one to poke, but I assume it's prepared for parallel installation of several versions now. Dominique --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-buildservice+help@opensuse.org

Dirk Stoecker

7 May 7 May

10:50

New subject: [opensuse-buildservice] Expansion error, which I can'texplain. :-(

On Tue, 6 May 2008, Dominique Leuenberger wrote: Hello, you mailer is broken: X-Mailer: Novell GroupWise Internet Agent 7.0.3 It removed the space at the end of the broken subject line. As this is a Novell product and this is a Novell mailinglist, I thought it should be mentioned. Ciao -- http://www.dstoecker.eu/ (PGP key available) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-buildservice+help@opensuse.org

Dominique Leuenberger

6 May 6 May

15:04

New subject: [opensuse-buildservice] Expansion error, which I can'texplain. :-(

...

...
...
On 06.05.2008 at 18:03, Stefan Dirsch wrote: On Tue, May 06, 2008 at 04:47:14PM +0200, Dominique Leuenberger wrote:

...
...
On 06.05.2008 at 17:47, Stefan Dirsch wrote: Hi

I'm getting expansion errors, I cannot explain. Once I understand them I would like to fix the issue.

Project: CrossToochain:avr Package: avr-libc/avr-gdb Repository: openSUSE_Factory/i586

"Nothing provides cross-avr-gcc"

But you can see that cross-avr-gcc has been built successfully in the same project!?! See also

https://build.opensuse.org/project/monitor?project=CrossToolchain%3Aavr

Actually, the package that was built is called cross-avr-gcc43.

Indeed. But why? The resulted package should be called cross-avr-gcc.

Actually from the spec file inside openSUSE:Factory (cross-avr-gcc43.spec): Name: cross-avr-gcc43 in openSUSE:Factory, this makes part of the package gcc43 Dominique --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-buildservice+help@opensuse.org

Stefan Dirsch

15:24

New subject: [opensuse-buildservice] Expansion error, which I can'texplain. :-(

On Tue, May 06, 2008 at 05:04:31PM +0200, Dominique Leuenberger wrote:

...

...
...
...
On 06.05.2008 at 18:03, Stefan Dirsch wrote: On Tue, May 06, 2008 at 04:47:14PM +0200, Dominique Leuenberger wrote:

...
...
On 06.05.2008 at 17:47, Stefan Dirsch wrote: Hi

I'm getting expansion errors, I cannot explain. Once I understand them I would like to fix the issue.

Project: CrossToochain:avr Package: avr-libc/avr-gdb Repository: openSUSE_Factory/i586

"Nothing provides cross-avr-gcc"

But you can see that cross-avr-gcc has been built successfully in the same project!?! See also

https://build.opensuse.org/project/monitor?project=CrossToolchain%3Aavr

Actually, the package that was built is called cross-avr-gcc43.

Indeed. But why? The resulted package should be called cross-avr-gcc.

Actually from the spec file inside openSUSE:Factory (cross-avr-gcc43.spec): Name: cross-avr-gcc43

in openSUSE:Factory, this makes part of the package gcc43

So how can I force the package to be named cross-avr-gcc instead of cross-avr-gcc43? I think this would fix the issue finally. Best regards, Stefan Public Key available ------------------------------------------------------ Stefan Dirsch (Res. & Dev.) SUSE LINUX Products GmbH Tel: 0911-740 53 0 Maxfeldstraße 5 FAX: 0911-740 53 479 D-90409 Nürnberg http://www.suse.de Germany ----------------------------------------------------------------- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) ----------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-buildservice+help@opensuse.org

Dominique Leuenberger

14:49

New subject: [opensuse-buildservice] Expansion error, which I can't explain. :-(

...

...
...
On 06.05.2008 at 17:47, Stefan Dirsch wrote: Hi

I'm getting expansion errors, I cannot explain. Once I understand them I would like to fix the issue.

Project: CrossToochain:avr Package: avr-libc/avr-gdb Repository: openSUSE_Factory/i586

"Nothing provides cross-avr-gcc"

But you can see that cross-avr-gcc has been built successfully in the same project!?! See also

https://build.opensuse.org/project/monitor?project=CrossToolchain%3Aavr

Any help would be appreciated.

Stefan, i just verified another of your builds: they actually do not use the cross-avr-gcc from your project. You are building package cross-avr-gcc43, the others install cross-avr-gcc in version 4.1. So older distros simply provided cross-avr-gcc, while factory provides cross-avr-gcc43 now. Dominique --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-buildservice+help@opensuse.org

Stefan Dirsch

15:07

New subject: [opensuse-buildservice] Expansion error, which I can't explain. :-(

On Tue, May 06, 2008 at 04:49:16PM +0200, Dominique Leuenberger wrote:

...

...
...
...
On 06.05.2008 at 17:47, Stefan Dirsch wrote: Hi

I'm getting expansion errors, I cannot explain. Once I understand them I would like to fix the issue.

Project: CrossToochain:avr Package: avr-libc/avr-gdb Repository: openSUSE_Factory/i586

"Nothing provides cross-avr-gcc"

But you can see that cross-avr-gcc has been built successfully in the same project!?! See also

https://build.opensuse.org/project/monitor?project=CrossToolchain%3Aavr

Any help would be appreciated.

Stefan,

i just verified another of your builds: they actually do not use the cross-avr-gcc from your project. You are building package cross-avr-gcc43, the others install cross-avr-gcc in version 4.1.

But where does this cross-avr-gcc (4.1) come from?

...

So older distros simply provided cross-avr-gcc, while factory provides cross-avr-gcc43 now.

Not sure if I understand this correctly. Other distris like 10.2 also build cross-avr-gcc43. Best regards, Stefan Public Key available ------------------------------------------------------ Stefan Dirsch (Res. & Dev.) SUSE LINUX Products GmbH Tel: 0911-740 53 0 Maxfeldstraße 5 FAX: 0911-740 53 479 D-90409 Nürnberg http://www.suse.de Germany ----------------------------------------------------------------- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) ----------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-buildservice+help@opensuse.org

Dominique Leuenberger

15:07

New subject: [opensuse-buildservice] Expansion error, which I can'texplain. :-(

...

...
...
On 06.05.2008 at 18:07, Stefan Dirsch wrote: On Tue, May 06, 2008 at 04:49:16PM +0200, Dominique Leuenberger wrote:

...
...
On 06.05.2008 at 17:47, Stefan Dirsch wrote: Hi

I'm getting expansion errors, I cannot explain. Once I understand them I would like to fix the issue.

Project: CrossToochain:avr Package: avr-libc/avr-gdb Repository: openSUSE_Factory/i586

"Nothing provides cross-avr-gcc"

But you can see that cross-avr-gcc has been built successfully in the same project!?! See also

https://build.opensuse.org/project/monitor?project=CrossToolchain%3Aavr

Any help would be appreciated.

Stefan,

i just verified another of your builds: they actually do not use the cross-avr-gcc from your project. You are building package cross-avr-gcc43, the others install cross-avr-gcc in version 4.1.

But where does this cross-avr-gcc (4.1) come from?

I think openSUSE 10.3 (for example) hat a packaged called cross-avr-gcc in it's stock and it was version 4.1.3 then. As you buildRequire cross-avr-gcc, this is the only package that fits. The one which is in your own project does NOT build cross-avr-gcc, but cross-avr-gcc43, which is another name. The package name inside obs is not used in any case,.

...

...
So older distros simply provided cross-avr-gcc, while factory provides cross-avr-gcc43 now.

Not sure if I understand this correctly. Other distris like 10.2 also build cross-avr-gcc43.

They build cross-avr-gcc43, but as they already provided on their own a cross-avr-gcc (older versions) your spec file picks those up. Dominique --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-buildservice+help@opensuse.org

5826

Age (days ago)

5827

Last active (days ago)

List overview

Download

9 comments

3 participants

participants (3)

Dirk Stoecker
Dominique Leuenberger
Stefan Dirsch