From xavier.jaffrezic@renault.com Wed Sep 28 09:18:10 2011 From: JAFFREZIC Xavier To: buildservice@lists.opensuse.org Subject: [opensuse-buildservice] Failed to setup an OBS private instance from 2.2.90 Appliance Date: Wed, 28 Sep 2011 11:18:06 +0200 Message-ID: MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="===============8146145607852198841==" --===============8146145607852198841== Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Hi everybody I've tried to start from scratch an OBS Private instance from the 2.2.90 appl= iance (64 bits) . Preparing the Raid1 Disk Array and Writing the Appliance to a dedicated Disk = were fine. The Appliance boot successfully and recognize my Raid Array a LVM . Then I have updated the 2 following files - /etc/sysconfig/proxy - /usr/lib/obs/server/BSConfig.pm=20 In order to match my firewall settings Then I reboot the appliance and everything were still fine=20 So I tried to my OBS instance to be Remotely linked to another using the WebUI Whatever the target (opensuse or Meego) this failed . An I get :=20 OBS Web Interface Error: Error Details: Errorcode: unknown Message: xpath for delete did not give exactly one node!" Because, I have setup a Private instance with the 2.2.84 (32bits), I have a c= opy of a working configuration file for this. So, I decided to create manuall= y the raw config File (using my backup):=20 =C2=A0 Remote access to OBS MeeGo Server =C2=A0 =C2=A0 https://api.meego.com/public =C2=A0 =C2=A0 This config was accepted by the WebUI. Then I have created another project which id pointing to this one. =C2=A0 User=C2=A0 applications with HMI =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0=C2=A0=C2=A0 =C2=A0=C2=A0=C2=A0 armv8el =C2=A0=C2=A0=C2=A0 i586 =C2=A0 This was well accepted from the UI. Then I upload a package in this project . This Package was successfully build= ing on my previous instance . After uploading , nothing occurs (No Start building.) then I walk in the UI and in the repository page, I found the "trigger rebuil= d" button . When cliking =C2=A0the UI says :=20 remote error: access denied To check my OBS connectivity, I've used osc from another computer with the fo= llowing =C2=A0.oscrc [general] apiurl =3D https://10.220.95.219:444 su-wrapper =3D sudo no_verify =3D 1 [https://10.220.95.219:444] keyring=3D1 Where 10.220.95.219 is the IP of my OBS server When I'am launching =C2=A0the following command :=20 osc ls Linked_Build:MeeGo:1.2:oss I can see the full listing for the MeeGo:1.2:oss packages. So the connectivit= y of my OBS looks right (Correct firewall configuration) What I'am missing in the configuration ? Do I need to some tweaking ? Should I switch back to 2.2.84 (oups . =C2=A0Is there still some image online= ?) -- Disclaimer ------------------------------------=20 Ce message ainsi que les eventuelles pieces jointes constituent une correspon= dance privee et confidentielle a l'attention exclusive du destinataire design= e ci-dessus. Si vous n'etes pas le destinataire du present message ou une per= sonne susceptible de pouvoir le lui delivrer, il vous est signifie que toute = divulgation, distribution ou copie de cette transmission est strictement inte= rdite. Si vous avez recu ce message par erreur, nous vous remercions d'en inf= ormer l'expediteur par telephone ou de lui retourner le present message, puis= d'effacer immediatement ce message de votre systeme. *** This e-mail and any attachments is a confidential correspondence intended= only for use of the individual or entity named above. If you are not the int= ended recipient or the agent responsible for delivering the message to the in= tended recipient, you are hereby notified that any disclosure, distribution o= r copying of this communication is strictly prohibited. If you have received = this communication in error, please notify the sender by phone or by replying= this message, and then delete this message from your system. --=20 To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org --===============8146145607852198841==-- From dominig.arfoll@fridu.net Wed Sep 28 12:47:44 2011 From: "Dominig ar Foll (Intel OTC)" To: buildservice@lists.opensuse.org Subject: Re: [opensuse-buildservice] Failed to setup an OBS private instance from 2.2.90 Appliance Date: Wed, 28 Sep 2011 14:47:38 +0200 Message-ID: <4E83176A.20403@fridu.net> In-Reply-To: MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="===============5130964946590769782==" --===============5130964946590769782== Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Xavier, we are just finishing one new drop from the Obs Light project which is=20 an OBS appilance ready to run preconfigured for MeeGo remote use. You will find it here : http://susegallery.com/a/e0uuBG/meego-obs We as soon that we find where to host the 30GB tar of the MeeGo 1.2 boot=20 strap, we will publish it as well. We have fixed many issue related to the configuration of IP addresses=20 changes during OBS appliance installation which shoudl help you. Feed back is welcomed. -- Dominig Dominig ar Foll Architect MeeGo IVI and TV. Intel Open Technology Centre Le 28/09/2011 11:18, JAFFREZIC Xavier a =C3=A9crit : > Hi everybody > > I've tried to start from scratch an OBS Private instance from the 2.2.90 ap= pliance (64 bits) . > Preparing the Raid1 Disk Array and Writing the Appliance to a dedicated Dis= k were fine. > The Appliance boot successfully and recognize my Raid Array a LVM . > > Then I have updated the 2 following files > - /etc/sysconfig/proxy > - /usr/lib/obs/server/BSConfig.pm > > In order to match my firewall settings > Then I reboot the appliance and everything were still fine > > So I tried to my OBS instance to be Remotely linked to another using the We= bUI > Whatever the target (opensuse or Meego) this failed . An I get : > > OBS Web Interface Error: > Error Details: > Errorcode: unknown > Message: xpath for delete did not give exactly one node!" > > Because, I have setup a Private instance with the 2.2.84 (32bits), I have a= copy of a working configuration file for this. So, I decided to create manua= lly the raw config File (using my backup): > > Remote access to OBS MeeGo Server > > https://api.meego.com/public > > > > > This config was accepted by the WebUI. > > Then I have created another project which id pointing to this one. > > User applications with HMI > > > > > > armv8el > i586 > > > > This was well accepted from the UI. > > Then I upload a package in this project . This Package was successfully bui= lding on my previous instance . > After uploading , nothing occurs (No Start building.) > > then I walk in the UI and in the repository page, I found the "trigger rebu= ild" button . When cliking the UI says : > remote error: access denied > > To check my OBS connectivity, I've used osc from another computer with the = following .oscrc > [general] > apiurl =3D https://10.220.95.219:444 > su-wrapper =3D sudo > no_verify =3D 1 > > [https://10.220.95.219:444] > keyring=3D1 > > Where 10.220.95.219 is the IP of my OBS server > When I'am launching the following command : > > osc ls Linked_Build:MeeGo:1.2:oss > > I can see the full listing for the MeeGo:1.2:oss packages. So the connectiv= ity of my OBS looks right (Correct firewall configuration) > > What I'am missing in the configuration ? Do I need to some tweaking ? > Should I switch back to 2.2.84 (oups . Is there still some image online ?) > > -- Disclaimer ------------------------------------ > Ce message ainsi que les eventuelles pieces jointes constituent une corresp= ondance privee et confidentielle a l'attention exclusive du destinataire desi= gne ci-dessus. Si vous n'etes pas le destinataire du present message ou une p= ersonne susceptible de pouvoir le lui delivrer, il vous est signifie que tout= e divulgation, distribution ou copie de cette transmission est strictement in= terdite. Si vous avez recu ce message par erreur, nous vous remercions d'en i= nformer l'expediteur par telephone ou de lui retourner le present message, pu= is d'effacer immediatement ce message de votre systeme. > > *** This e-mail and any attachments is a confidential correspondence intend= ed only for use of the individual or entity named above. If you are not the i= ntended recipient or the agent responsible for delivering the message to the = intended recipient, you are hereby notified that any disclosure, distribution= or copying of this communication is strictly prohibited. If you have receive= d this communication in error, please notify the sender by phone or by replyi= ng this message, and then delete this message from your system. > --=20 To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org --===============5130964946590769782==--