June 2010 - openSUSE Build Service - openSUSE Mailing Lists

Re: [opensuse-buildservice] can't enable anonymous access
by Jan Engelhardt 26 Jun '10

26 Jun '10

Adrian Schroeter wrote on June 12 2010: > >>I know that you can enable anonymous access from >>/srv/www/obs/api/config/options.yml. Is that all you have to do? I >>can't seem to get it to work. > >yes, but you need to configure both: > >allow_anonymous: true >webui_host: build.opensuse.org > >webui_host specifies which webui is allowed with anonymous access. But _what_ do I put into webui_host? "localhost"? An IP address? What if I have to specify multiple webui hosts' addresses? --- 16:44 ares:../api/config # cat options.yml #exception_recipients: ['webclient_noreply(a)opensuse.org'] # add also webui_host setting if you want allow anonymous read access via webui allow_anonymous: true webui_host: ares.medozas.de #build.opensuse.org # should be set always webui_url: http://ares.medozas.de:80/ # make use of # http://blog.lighttpd.net/articles/2006/07/22/x-sendfiles-new-friend-x-rewri… # note that you need to enable the proxy-core option to allow this #use_lighttpd_x_rewrite: true --- As it stands like that, no anonymous viewing is allowed right now, and it's impossible to figure out. Yes, lighttpd has been restarted. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 3

[opensuse-buildservice] srcserver download hangs
by Jan Engelhardt 26 Jun '10

26 Jun '10

Hi, I have here this message: 11:54 ares:../A3/glibc > osc r standard sparcv9 blocked: openSUSE.org:openSUSE:Factory glibc: download in progress standard sparc64 blocked: openSUSE.org:openSUSE:Factory glibc: download in progress Yesterday I spotted that `rcobssrcserver status` would indeed list one process that was busy downloading glibc. Today this is not the case 11:55 ares:../A3/glibc # rcobssrcserver status Checking for obssrcserver and running processes: running 11:55 ares:../A3/glibc # rcobsrepserver status Checking for obsrepserver and running processes: running According to ss, there are connections active... 11:55 ares:../A3/glibc # ss -antp|grep :443 ESTAB 0 0 134.76.83.59:60547 195.135.221.33:443 users:(("bs_sched",11834,5)) ESTAB 0 0 134.76.83.59:60545 195.135.221.33:443 users:(("bs_sched",11836,5)) ESTAB 0 0 134.76.83.59:60546 195.135.221.33:443 users:(("bs_sched",11835,5)) ESTAB 0 0 134.76.83.59:60544 195.135.221.33:443 users:(("bs_sched",11833,5)) But not by srcserver. So just what is going on with glibc/bssrcserver here..it's not really transparent. Jan -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

1 0

[opensuse-buildservice] Need help with build service graphics blender
by Dave Plater 26 Jun '10

26 Jun '10

Hi, I had a problem with graphics blender when I tried to submit to factory this morning. The x86_64 build had frozen and when I viewed the diff through the web ui there was no submission box at the bottom, I was logged in, I then deleted the factory link and then when I tried to recreate it with "osc linkpac graphics blender openSUSE:Factory blender" I get the following message :- openSUSE:Factory Server returned an error: HTTP Error 403: Forbidden Insufficient permissions to store file in package blender, project openSUSE:Factory Creating _link... and no link is created. I've submitted the bug fix but the package needs its link. Thanks Dave P -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] Call for help: work with us on extending our test coverage.
by Adrian Schröter 25 Jun '10

25 Jun '10

Hi, The quality of our OBS is more or less defined by our test suite. A good test suite will lead to a good quality of our services and our OBS releases. It can be also used by OBS server admins to validate that their installation works okay. Unfortunately the coverage of our test suite is currently way too low (tools report a 16% coverage), but even worse also quite some critical components are not tested much better. We (esp. coolo) worked on the api test suite lately. It should be easy to setup and run for everybody. It is also a good way to dig into OBS code to learn how to hack on OBS later on, implementing your long missed features or eager awaited bugfixes. ALso parts of the backend (like the source server) can be tested now directly via running the api test suite. A simple howto can be found here: http://wiki.opensuse.org/openSUSE:Build_Service_Testsuite It is not really a good how-to yet, but I just don't know how to write it better. I promise to improve it when ever someone comes with a question. I promise also to try to send you some kind of gift (like an opensuse t-shirt), if you can provide a new test which finds a bug in OBS. All my lately written tests found bugs, so it should be easy ;) In case you don't know what kind of test could be written, just run grep -r FIXME test/ Feel free to ask here (or on #opensuse-buildservice irc channel) for more help on this. bye adrian -- Adrian Schroeter SUSE Linux Products GmbH email: adrian(a)suse.de -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] Re: [PATCH] enable signing only if local instance has a hardware number generator. (Testing this first with 2.1 alpha and backport later to 2.0)
by Michael Schroeder 25 Jun '10

25 Jun '10

On Fri, Jun 25, 2010 at 03:16:46PM +0200, OBS build-service wrote: > From: Adrian Schröter <adrian(a)suse.de> > > --- > dist/obsapisetup | 8 +++++ > dist/obsstoragesetup | 76 +++++++++++++++++++++++++++---------------------- > 2 files changed, 50 insertions(+), 34 deletions(-) > > diff --git a/dist/obsapisetup b/dist/obsapisetup > index 2b875a7..784c63c 100755 > --- a/dist/obsapisetup > +++ b/dist/obsapisetup > @@ -84,6 +84,14 @@ Welcome to openSUSE Build Service(OBS) Appliance $OBSVERSION > based on $OS > > EOF > + if [ ! -f /dev/hw_random ]; then > + cat >> /etc/issue <<EOF > + > + WARNING: **** No hardware number generator found, package signing got disabled! **** Hmm, shouldn't that be /dev/hwrng nowadays? Cheers, Michael. -- Michael Schroeder mls(a)suse.de SUSE LINUX Products GmbH, GF Markus Rex, HRB 16746 AG Nuernberg main(_){while(_=~getchar())putchar(~_-1/(~(_|32)/13*2-11)*13);} -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 1

[opensuse-buildservice] maintenance, osc branch/mbranch
by Wolfgang Rosenauer 24 Jun '10

24 Jun '10

Hi, I have to prepare some updates once again and tried to follow the process which used to be described here: http://en.opensuse.org/Maintenance This one points to here now: http://wiki.opensuse.org/openSUSE:Maintenance The latter is inconsistent while the first seem to be consistent but not matching OBS' osc behaviour anymore when it comes to osc branch usage. osc branch openSUSE:11.2 perl-Bootloader this will print what you need to check out, either: home:jreidinger:branches:openSUSE:11.2/perl-Bootloader or if there already was an update of perl-Bootloader: home:jreidinger:branches:openSUSE:11.2:Update:Test/perl-Bootloader So according to this I should get the latest (update) package for my branch but this isn't the case (anymore?). I always get the exact GA version of the package branched instead. The new page http://wiki.opensuse.org/openSUSE:Maintenance/Packager is telling me to use :Update but then the pasted osc output makes no sense: "Note: The branch has been created of a different project" So parts of that description still implies the old behaviour (but apparently someone found that and added the "Update" string in the command above? But also this is apparently broken because if there is no updated package the branch command fails and doesn't use the base project to branch from there. So now you could say I should fix the documentation but actually I'm not sure where the issue is. I would say that OBS (or osc?) changed its behaviour but absolutely unsure if intentionally or not. If osc branch doesn"t do automatically the right thing anymore it's probably useless to recommend or describe that usage? If it's a bug in OBS I'm completely right in posting here though. Please tell me what the supposed behaviour is. Wolfgang -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

4 3

[opensuse-buildservice] how to remove "conflict in file" on build service
by Douglas Hubler 23 Jun '10

23 Jun '10

I do not see same conflict on local copy of files and i don't know what i would have done to trigger this. running osc resolved on file locally doesn't have any effect, not that i thought it would. this is happened to me on several occasions and in the past i delete the package and start over w/o branching, but clearly i'm doing something wrong to trigger this. i'd like to keep using the branch feature. project home:sipfoundry:main packages sipxconfig sipxivr thanks -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] debug-packages on SLES9
by Christof Hanke 23 Jun '10

23 Jun '10

Hi all, the debuginfo-packages for SLES9 are kind of empty, because the script /usr/lib/rpm/find-debuginfo.sh uses "eu-strip" which is not available for SLES9 : extracting debug info from /var/tmp/openafs-osd-1.4.12- build/usr/lib64/openafs/ptserver /usr/lib/rpm/find-debuginfo.sh: line 36: eu-strip: command not found When replacing the call of eu-strip to normal strip, I get the debug-files, but not the debug-source, because the debugsources.list is not correct. Is there a workaround for this or should I just file a bug or is this a "WONTFIX" case? Cheers, Christof -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-buildservice+help(a)opensuse.org

2 2

[opensuse-buildservice] osc importsrcpkg doesn't work
by Carsten Schoene 22 Jun '10

22 Jun '10

Hello, today i noticed that 'osc importsrcpkg <pkgname<.src.rpm' doesn't work anymore. The resulting message is: 'NoneType' object has no attribute 'text' My osc version is 0.127 installed from openSUSE:Tools. Is this a bug? Regards Carsten Schoene

1 0

[opensuse-buildservice] Ubuntu 10.04, java package setup broken
by Nico Kruber 22 Jun '10

22 Jun '10

Hi, my package requires java6-sdk and on Ubuntu 10.04 the system setup fails - see https://build.opensuse.org/package/live_build_log?arch=x86_64&package=xtree… message is: "/var/lib/dpkg/info/openjdk-6-jre-headless.postinst: 85: mountpoint: not found the java command requires a mounted proc fs (/proc)" there is also the following: "openjdk-6-jre-headless depends on ca-certificates-java; however: Package ca- certificates-java is not installed" but the same message appears in my Ubuntu 9.10 and 9.04 setups which work - see https://build.opensuse.org/package/live_build_log?arch=x86_64&package=xtree… https://build.opensuse.org/package/live_build_log?arch=x86_64&package=xtree… Regards Nico Kruber

1 0