https://bugzilla.novell.com/show_bug.cgi?id=476024
User mario_bz@mgtech.com added comment https://bugzilla.novell.com/show_bug.cgi?id=476024#c1
Summary: Message "Cannot find map file" during boot Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: i586 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: Bootloader AssignedTo: jsrain@novell.com ReportedBy: mario_bz@mgtech.com QAContact: jsrain@novell.com Found By: ---
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.6) Gecko/2009012700 SUSE/3.0.6-1.4 Firefox/3.0.6
After installing 11.1 this weekend, the machine does not normally but I noticed this message as the first fews lines in boot.log:
Inspecting /boot/System.map-2.6.27.7-9-pae Cannot find map file. No module symbols loaded - kernel modules not enabled.
Cannot build symbol table - disabling symbol lookups klogd 1.4.1, log source = ksyslog started. <6>Initializing cgroup subsys cpuset
I don't know if this is normal but it was different on my 10.3. The entire log is: Inspecting /boot/System.map-2.6.27.7-9-pae Cannot find map file. No module symbols loaded - kernel modules not enabled.
Cannot build symbol table - disabling symbol lookups klogd 1.4.1, log source = ksyslog started. <6>Initializing cgroup subsys cpuset <6>Initializing cgroup subsys cpu <5>Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100 <6>BIOS-provided physical RAM map: <6> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <6> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <6> BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) <6> BIOS-e820: 0000000000100000 - 00000000bff40000 (usable) <6> BIOS-e820: 00000000bff40000 - 00000000bff4e000 (ACPI data) <6> BIOS-e820: 00000000bff4e000 - 00000000bffe0000 (ACPI NVS) <6> BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) <6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <6> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) <6> BIOS-e820: 0000000100000000 - 0000000140000000 (usable) <6>DMI 2.4 present. <5>AMI BIOS detected: BIOS may corrupt low RAM, working it around. <6>last_pfn = 0x140000 max_arch_pfn = 0x1000000 <6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 <7>kernel direct mapping tables up to 38000000 @ 10000-15000 <6>NX (Execute Disable) protection: active <6>RAMDISK: 37a16000 - 37fef708 <4>ACPI: RSDP 000F9EE0, 0024 (r2 ACPIAM) <4>ACPI: XSDT BFF40100, 004C (r1 A_M_I_ OEMXSDT 2000818 MSFT 97) <4>ACPI: FACP BFF40290, 00F4 (r3 A_M_I_ OEMFACP 2000818 MSFT 97) <4>ACPI: DSDT BFF40590, 96A9 (r1 A0590 A0590001 1 INTL 20060113) <4>ACPI: FACS BFF4E000, 0040 <4>ACPI: APIC BFF40390, 0080 (r1 A_M_I_ OEMAPIC 2000818 MSFT 97) <4>ACPI: OEMB BFF4E040, 007C (r1 A_M_I_ AMI_OEM 2000818 MSFT 97) <4>ACPI: HPET BFF49C40, 0038 (r1 A_M_I_ OEMHPET 2000818 MSFT 97) <4>ACPI: MCFG BFF49C80, 003C (r1 A_M_I_ OEMMCFG 2000818 MSFT 97) <7>ACPI: Local APIC address 0xfee00000 <7>NUMA - single node, flat memory mode <6>Node: 0, start_pfn: 0, end_pfn: 140000 <7> Setting physnode_map array to node 0 for pfns: <7> 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 80000 84000 88000 8c000 90000 94000 98000 9c000 a0000 a4000 a8000 ac000 b0000 b4000 b8000 bc000 c0000 c4000 c8000 cc000 d0000 d4000 d8000 dc000 e0000 e4000 e8000 ec000 f0000 f4000 f8000 fc000 100000 104000 108000 10c000 110000 114000 118000 11c000 120000 124000 128000 12c000 130000 134000 138000 13c000 <7>node 0 pfn: [0 - 140000] <7>Reserving 11776 pages of KVA for lmem_map of node 0 at 13d200 <7>remove_active_range (0, 1298944, 1310720) <6>Reserving total of 2e00 pages for numa KVA remap <6>kva_start_pfn ~ 34c00 max_low_pfn ~ 38000 <6>max_pfn = 140000 <5>4224MB HIGHMEM available. <5>896MB LOWMEM available. <7>max_low_pfn = 38000, highstart_pfn = 38000 <7>Low memory ends at vaddr f8000000 <7>node 0 will remap to vaddr f4c00000 - f7a00000 <7>allocate_pgdat: node 0 NODE_DATA f4c00000 <7>remap_numa_kva: node 0 <7>remap_numa_kva: f4c00000 to pfn 0013d200 <7>remap_numa_kva: f4e00000 to pfn 0013d400 <7>remap_numa_kva: f5000000 to pfn 0013d600 <7>remap_numa_kva: f5200000 to pfn 0013d800 <7>remap_numa_kva: f5400000 to pfn 0013da00 <7>remap_numa_kva: f5600000 to pfn 0013dc00 <7>remap_numa_kva: f5800000 to pfn 0013de00 <7>remap_numa_kva: f5a00000 to pfn 0013e000 <7>remap_numa_kva: f5c00000 to pfn 0013e200 <7>remap_numa_kva: f5e00000 to pfn 0013e400 <7>remap_numa_kva: f6000000 to pfn 0013e600 <7>remap_numa_kva: f6200000 to pfn 0013e800 <7>remap_numa_kva: f6400000 to pfn 0013ea00 <7>remap_numa_kva: f6600000 to pfn 0013ec00 <7>remap_numa_kva: f6800000 to pfn 0013ee00 <7>remap_numa_kva: f6a00000 to pfn 0013f000 <7>remap_numa_kva: f6c00000 to pfn 0013f200 <7>remap_numa_kva: f6e00000 to pfn 0013f400 <7>remap_numa_kva: f7000000 to pfn 0013f600 <7>remap_numa_kva: f7200000 to pfn 0013f800 <7>remap_numa_kva: f7400000 to pfn 0013fa00 <7>remap_numa_kva: f7600000 to pfn 0013fc00 <7>remap_numa_kva: f7800000 to pfn 0013fe00 <7>High memory starts at vaddr f8000000 <6> mapped low ram: 0 - 38000000 <6> low ram: 00000000 - 38000000 <6> bootmap 00014000 - 0001b000 <6>(11 early reservations) ==> bootmem [0000000000 - 0038000000] <6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] <6> #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] <6> #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] <6> #3 [0000100000 - 000066c45c] TEXT DATA BSS ==> [0000100000 - 000066c45c] <6> #4 [0037a16000 - 0037fef708] RAMDISK ==> [0037a16000 - 0037fef708] <6> #5 [000066d000 - 0000675000] INIT_PG_TABLE ==> [000066d000 - 0000675000] <6> #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] <6> #7 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] <6> #8 [013d200000 - 0140000000] KVA RAM <6> #9 [0034c00000 - 0037a00000] KVA PG ==> [0034c00000 - 0037a00000] <6> #10 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000] <6>found SMP MP-table at [c00ff780] 000ff780 <4>Zone PFN ranges: <4> DMA 0x00000010 -> 0x00001000 <4> Normal 0x00001000 -> 0x00038000 <4> HighMem 0x00038000 -> 0x00140000 <4>Movable zone start PFN for each node <4>early_node_map[3] active PFN ranges <4> 0: 0x00000010 -> 0x0000009f <4> 0: 0x00000100 -> 0x000bff40 <4> 0: 0x00100000 -> 0x0013d200 <7>On node 0 totalpages: 1036495 <7>free_area_init_node: node 0, pgdat f4c00000, node_mem_map f4c02240 <7> DMA zone: 3947 pages, LIFO batch:0 <7> Normal zone: 223300 pages, LIFO batch:31 <7> HighMem zone: 797831 pages, LIFO batch:31 <6>Using APIC driver default <6>ACPI: PM-Timer IO Port: 0x808 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) <6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) <6>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <6>ACPI: HPET id: 0x8086a201 base: 0xfed00000 <6>Using ACPI (MADT) for SMP configuration information <6>SMP: Allowing 4 CPUs, 2 hotplug CPUs <7>mapped APIC to ffffb000 (fee00000) <7>mapped IOAPIC to ffffa000 (fec00000) <6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 <6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 <6>PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 <6>Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000) <6>PERCPU: Allocating 39708 bytes of per cpu data <7>NR_CPUS: 128, nr_cpu_ids: 4, nr_node_ids 8 <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025078 <4>Policy zone: HighMem <5>Kernel command line: root=/dev/g1/suse111 resume=/dev/g1/swap splash=silent vga=0x31a <6>bootsplash: silent mode. <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 16384 bytes) <6>TSC: PIT calibration confirmed by PMTIMER. <6>TSC: using PMTIMER calibration value <4>Detected 2404.101 MHz processor. <4>Console: colour dummy device 80x25 <6>console [tty0] enabled <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Initializing HighMem for node 0 (00038000:0013d200) <6>Memory: 4086248k/5242880k available (2396k kernel code, 59732k reserved, 1959k data, 328k init, 3228928k highmem) <6>virtual kernel memory layout: <6> fixmap : 0xff8b6000 - 0xfffff000 (7460 kB) <6> pkmap : 0xff400000 - 0xff600000 (2048 kB) <6> vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) <6> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) <6> .init : 0xc0548000 - 0xc059a000 ( 328 kB) <6> .data : 0xc03571ab - 0xc0540f88 (1959 kB) <6> .text : 0xc0100000 - 0xc03571ab (2396 kB) <6>Checking if this processor honours the WP bit even in supervisor mode...Ok. <7>CPA: page pool initialized 1 of 1 pages preallocated <7>hpet clockevent registered <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 4808.20 BogoMIPS (lpj=9616404) <4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved <6>Security Framework initialized <6>SELinux: Disabled at boot. <6>AppArmor: AppArmor initialized <4>Mount-cache hash table entries: 512 <6>Initializing cgroup subsys ns <6>Initializing cgroup subsys cpuacct <6>Initializing cgroup subsys memory <6>Initializing cgroup subsys devices <6>Initializing cgroup subsys freezer <6>CPU: L1 I cache: 32K, L1 D cache: 32K <6>CPU: L2 cache: 4096K <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 0 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <6>using mwait in idle threads. <6>Checking 'hlt' instruction... OK. <6>ACPI: Core revision 20080609 <6>ACPI: Checking initramfs for custom DSDT <4>Parsing all Control Methods: <4>Table [DSDT](id 0001) - 952 Objects with 63 Devices 240 Methods 32 Regions <4> tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired <4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful <6>Mapping cpu 0 to node 0 <4>ENABLING IO-APIC IRQs <6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 <6>Booting processor 1/1 ip 6000 <6>Initializing CPU#1 <6>Mapping cpu 1 to node 0 <6>Calibrating delay using timer specific routine.. 4808.23 BogoMIPS (lpj=9616470) <6>CPU: L1 I cache: 32K, L1 D cache: 32K <6>CPU: L2 cache: 4096K <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 1 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#1. <6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 <6>CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 <6>checking TSC synchronization [CPU#0 -> CPU#1]: passed. <6>Brought up 2 CPUs <6>Total of 2 processors activated (9616.43 BogoMIPS). <7>CPU0 attaching sched-domain: <7> domain 0: span 0-1 level MC <7> groups: 0 1 <7> domain 1: span 0-1 level NODE <7> groups: 0-1 <7>CPU1 attaching sched-domain: <7> domain 0: span 0-1 level MC <7> groups: 1 0 <7> domain 1: span 0-1 level NODE <7> groups: 0-1 <6>net_namespace: 1044 bytes <6>Booting paravirtualized kernel on bare hardware <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <5>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 <6>PCI: Not using MMCONFIG. <6>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 <6>PCI: Using configuration type 1 for base access <4>evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 <7>ACPI: EC: Look up EC in DSDT <4>Completing Region/Field/Buffer/Package initialization:.............................................................................................................................................................................................................. <4>Initialized 24/32 Regions 33/33 Fields 53/53 Buffers 96/97 Packages (961 nodes) <4>Initializing Device/Processor/Thermal objects by executing _INI methods:. <4>Executed 1 _INI methods requiring 0 _STA executions (examined 69 objects) <4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 1 Runtime GPEs in this block <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S1 S3 S4 S5) <6>ACPI: Using IOAPIC for interrupt routing <5>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 <5>PCI: MCFG area at f0000000 reserved in ACPI motherboard resources <6>PCI: Using MMCONFIG for extended config space <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <6>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:01.0: PME# disabled <7>PCI: 0000:00:1b.0 reg 10 64bit mmio: [edbf8000, edbfbfff] <6>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:1b.0: PME# disabled <6>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>pci 0000:00:1c.0: PME# disabled <6>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>pci 0000:00:1c.4: PME# disabled <6>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold <6>pci 0000:00:1c.5: PME# disabled <7>PCI: 0000:00:1d.0 reg 20 io port: [a880, a89f] <7>PCI: 0000:00:1d.1 reg 20 io port: [ac00, ac1f] <7>PCI: 0000:00:1d.2 reg 20 io port: [b000, b01f] <7>PCI: 0000:00:1d.3 reg 20 io port: [b080, b09f] <7>PCI: 0000:00:1d.7 reg 10 32bit mmio: [edbff800, edbffbff] <6>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold <6>pci 0000:00:1d.7: PME# disabled <6>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO <6>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO <7>PCI: 0000:00:1f.1 reg 10 io port: [0, 7] <7>PCI: 0000:00:1f.1 reg 14 io port: [0, 3] <7>PCI: 0000:00:1f.1 reg 18 io port: [0, 7] <7>PCI: 0000:00:1f.1 reg 1c io port: [0, 3] <7>PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf] <7>PCI: 0000:00:1f.2 reg 10 io port: [bc00, bc07] <7>PCI: 0000:00:1f.2 reg 14 io port: [b880, b883] <7>PCI: 0000:00:1f.2 reg 18 io port: [b800, b807] <7>PCI: 0000:00:1f.2 reg 1c io port: [b480, b483] <7>PCI: 0000:00:1f.2 reg 20 io port: [b400, b40f] <7>PCI: 0000:00:1f.2 reg 24 32bit mmio: [edbffc00, edbfffff] <6>pci 0000:00:1f.2: PME# supported from D3hot <6>pci 0000:00:1f.2: PME# disabled <7>PCI: 0000:00:1f.3 reg 20 io port: [400, 41f] <7>PCI: 0000:05:00.0 reg 10 32bit mmio: [ef000000, efffffff] <7>PCI: 0000:05:00.0 reg 14 64bit mmio: [d0000000, dfffffff] <7>PCI: 0000:05:00.0 reg 1c 64bit mmio: [ee000000, eeffffff] <7>PCI: 0000:05:00.0 reg 24 io port: [ec00, ec7f] <7>PCI: 0000:05:00.0 reg 30 32bit mmio: [edfe0000, edffffff] <4>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:01.0. It can be enabled forcedly with 'pcie_aspm=force' <7>PCI: bridge 0000:00:01.0 io port: [e000, efff] <7>PCI: bridge 0000:00:01.0 32bit mmio: [edf00000, efffffff] <7>PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff] <7>PCI: bridge 0000:00:1c.0 64bit mmio pref: [cff00000, cfffffff] <7>PCI: 0000:03:00.0 reg 10 64bit mmio: [edefc000, edefffff] <7>PCI: 0000:03:00.0 reg 18 io port: [d800, d8ff] <7>PCI: 0000:03:00.0 reg 30 32bit mmio: [edec0000, ededffff] <7>pci 0000:03:00.0: supports D1 <7>pci 0000:03:00.0: supports D2 <6>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:03:00.0: PME# disabled <4>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.4. It can be enabled forcedly with 'pcie_aspm=force' <7>PCI: bridge 0000:00:1c.4 io port: [d000, dfff] <7>PCI: bridge 0000:00:1c.4 32bit mmio: [ede00000, edefffff] <7>PCI: 0000:02:00.0 reg 10 io port: [cc00, cc07] <7>PCI: 0000:02:00.0 reg 14 io port: [c880, c883] <7>PCI: 0000:02:00.0 reg 18 io port: [c800, c807] <7>PCI: 0000:02:00.0 reg 1c io port: [c480, c483] <7>PCI: 0000:02:00.0 reg 20 io port: [c400, c40f] <7>PCI: 0000:02:00.0 reg 24 32bit mmio: [eddffc00, eddfffff] <7>PCI: 0000:02:00.0 reg 30 32bit mmio: [edd80000, eddbffff] <7>pci 0000:02:00.0: supports D1 <6>pci 0000:02:00.0: PME# supported from D0 D1 D3hot <6>pci 0000:02:00.0: PME# disabled <4>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.5. It can be enabled forcedly with 'pcie_aspm=force' <7>PCI: bridge 0000:00:1c.5 io port: [c000, cfff] <7>PCI: bridge 0000:00:1c.5 32bit mmio: [edd00000, eddfffff] <7>PCI: 0000:01:03.0 reg 10 32bit mmio: [edcff800, edcfffff] <7>PCI: 0000:01:03.0 reg 14 32bit mmio: [edcf8000, edcfbfff] <7>pci 0000:01:03.0: supports D1 <7>pci 0000:01:03.0: supports D2 <6>pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot <6>pci 0000:01:03.0: PME# disabled <6>pci 0000:00:1e.0: transparent bridge <7>PCI: bridge 0000:00:1e.0 32bit mmio: [edc00000, edcfffff] <7>bus 00 -> node 0 <7>ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT] <7>ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P3._PRT] <7>ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P8._PRT] <7>ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P9._PRT] <6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) <6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) <6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) <6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) <6>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) <6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) <6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - A0, should be 97 [20080609] <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>ACPI: bus type pnp registered <6>pnp: PnP ACPI: found 15 devices <6>ACPI: ACPI bus type pnp unregistered <6>PnPBIOS: Disabled by ACPI PNP <6>PCI: Using ACPI for IRQ routing <6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 <6>hpet0: 3 64-bit timers, 14318180 Hz <6>AppArmor: AppArmor Filesystem Enabled <4>ACPI: RTC can wake from S4 <6>system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved <6>system 00:07: ioport range 0x290-0x297 has been reserved <6>system 00:08: ioport range 0x4d0-0x4d1 has been reserved <6>system 00:08: ioport range 0x800-0x87f has been reserved <6>system 00:08: ioport range 0x400-0x41f has been reserved <6>system 00:08: ioport range 0x480-0x4bf has been reserved <6>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved <6>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved <6>system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved <6>system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved <6>system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved <6>system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved <6>system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved <6>system 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved <6>system 00:0e: iomem range 0x0-0x9ffff could not be reserved <6>system 00:0e: iomem range 0xc0000-0xdffff could not be reserved <6>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved <6>system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved <6>pci 0000:00:01.0: PCI bridge, secondary bus 0000:05 <6>pci 0000:00:01.0: IO window: 0xe000-0xefff <6>pci 0000:00:01.0: MEM window: 0xedf00000-0xefffffff <6>pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff <6>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 <6>pci 0000:00:1c.0: IO window: disabled <6>pci 0000:00:1c.0: MEM window: disabled <6>pci 0000:00:1c.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff <6>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 <6>pci 0000:00:1c.4: IO window: 0xd000-0xdfff <6>pci 0000:00:1c.4: MEM window: 0xede00000-0xedefffff <6>pci 0000:00:1c.4: PREFETCH window: disabled <6>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 <6>pci 0000:00:1c.5: IO window: 0xc000-0xcfff <6>pci 0000:00:1c.5: MEM window: 0xedd00000-0xeddfffff <6>pci 0000:00:1c.5: PREFETCH window: disabled <6>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 <6>pci 0000:00:1e.0: IO window: disabled <6>pci 0000:00:1e.0: MEM window: 0xedc00000-0xedcfffff <6>pci 0000:00:1e.0: PREFETCH window: disabled <6>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>pci 0000:00:01.0: setting latency timer to 64 <6>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>pci 0000:00:1c.0: setting latency timer to 64 <6>pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>pci 0000:00:1c.4: setting latency timer to 64 <6>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 <7>pci 0000:00:1c.5: setting latency timer to 64 <7>pci 0000:00:1e.0: setting latency timer to 64 <6>bus: 00 index 0 io port: [0, ffff] <6>bus: 00 index 1 mmio: [0, ffffffffffffffff] <6>bus: 05 index 0 io port: [e000, efff] <6>bus: 05 index 1 mmio: [edf00000, efffffff] <6>bus: 05 index 2 mmio: [d0000000, dfffffff] <6>bus: 05 index 3 mmio: [0, 0] <6>bus: 04 index 0 mmio: [0, 0] <6>bus: 04 index 1 mmio: [0, 0] <6>bus: 04 index 2 mmio: [cff00000, cfffffff] <6>bus: 04 index 3 mmio: [0, 0] <6>bus: 03 index 0 io port: [d000, dfff] <6>bus: 03 index 1 mmio: [ede00000, edefffff] <6>bus: 03 index 2 mmio: [0, 0] <6>bus: 03 index 3 mmio: [0, 0] <6>bus: 02 index 0 io port: [c000, cfff] <6>bus: 02 index 1 mmio: [edd00000, eddfffff] <6>bus: 02 index 2 mmio: [0, 0] <6>bus: 02 index 3 mmio: [0, 0] <6>bus: 01 index 0 mmio: [0, 0] <6>bus: 01 index 1 mmio: [edc00000, edcfffff] <6>bus: 01 index 2 mmio: [0, 0] <6>bus: 01 index 3 io port: [0, ffff] <6>bus: 01 index 4 mmio: [0, ffffffffffffffff] <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>NET: Registered protocol family 1 <6>Unpacking initramfs...<7>Switched to high resolution mode on CPU 1 <7>Switched to high resolution mode on CPU 0 <4> done <6>Freeing initrd memory: 5989k freed <6>Machine check exception polling timer started. <6>audit: initializing netlink socket (disabled) <5>type=2000 audit(1234709870.548:1): initialized <4>highmem bounce pool size: 64 pages <6>HugeTLB registered 2 MB page size, pre-allocated 0 pages <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>msgmni has been set to 421 <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <7>pci 0000:05:00.0: Boot video device <7>pcieport-driver 0000:00:01.0: setting latency timer to 64 <6>pcieport-driver 0000:00:01.0: found MSI capability <7>pci_express 0000:00:01.0:pcie00: allocate port service <7>pci_express 0000:00:01.0:pcie03: allocate port service <7>pcieport-driver 0000:00:1c.0: setting latency timer to 64 <6>pcieport-driver 0000:00:1c.0: found MSI capability <7>pci_express 0000:00:1c.0:pcie00: allocate port service <7>pci_express 0000:00:1c.0:pcie03: allocate port service <7>pcieport-driver 0000:00:1c.4: setting latency timer to 64 <6>pcieport-driver 0000:00:1c.4: found MSI capability <7>pci_express 0000:00:1c.4:pcie00: allocate port service <7>pci_express 0000:00:1c.4:pcie03: allocate port service <7>pcieport-driver 0000:00:1c.5: setting latency timer to 64 <6>pcieport-driver 0000:00:1c.5: found MSI capability <7>pci_express 0000:00:1c.5:pcie00: allocate port service <7>pci_express 0000:00:1c.5:pcie03: allocate port service <6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k, total 262144k <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1 <6>vesafb: protected mode interface info at c000:c640 <6>vesafb: pmi: set display start = c00cc676, set palette = c00cc6e0 <6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture... <6>bootsplash: silentjpeg size 113709 bytes <6>bootsplash: ...found (1280x1024, 43709 bytes, v3). <4>Console: switching to colour frame buffer device 156x60 <6>fb0: VESA VGA frame buffer device <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <7>hpet_resources: 0xfed00000 is busy <6>Serial: 8250/16550 driver8 ports, IRQ sharing enabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>mice: PS/2 mouse device common for all mice <6>cpuidle: using governor ladder <6>cpuidle: using governor menu <6>TCP cubic registered <4>Using IPI No-Shortcut mode <4>registered taskstats version 1 <6>Freeing unused kernel memory: 328k freed <6>Write protecting the kernel text: 2400k <6>Write protecting the kernel read-only data: 1776k <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 <4>ACPI: SSDT BFF4E0C0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) <4>Parsing all Control Methods: <4>Table [SSDT](id 004C) - 9 Objects with 0 Devices 3 Methods 0 Regions <6>processor ACPI_CPU:00: registered as cooling_device0 <6>ACPI: Processor [CPU1] (supports 8 throttling states) <4>ACPI: SSDT BFF4E290, 013A (r1 AMI CPU2PM 1 INTL 20060113) <4>Parsing all Control Methods: <4>Table [SSDT](id 004F) - 7 Objects with 0 Devices 4 Methods 0 Regions <6>processor ACPI_CPU:01: registered as cooling_device1 <6>ACPI: Processor [CPU2] (supports 8 throttling states) <6>ACPI: No dock devices found. <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <7>ahci 0000:00:1f.2: version 3.0 <6>ahci 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 <6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode <6>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part <7>ahci 0000:00:1f.2: setting latency timer to 64 <6>scsi0 : ahci <6>scsi1 : ahci <6>scsi2 : ahci <6>scsi3 : ahci <6>ata1: SATA max UDMA/133 abar m1024@0xedbffc00 port 0xedbffd00 irq 219 <6>ata2: SATA max UDMA/133 abar m1024@0xedbffc00 port 0xedbffd80 irq 219 <6>ata3: SATA max UDMA/133 abar m1024@0xedbffc00 port 0xedbffe00 irq 219 <6>ata4: SATA max UDMA/133 abar m1024@0xedbffc00 port 0xedbffe80 irq 219 <6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata1.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133 <6>ata1.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32) <6>ata1.00: configured for UDMA/133 <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: ATA-6: ST380013AS, 3.05, max UDMA/133 <6>ata2.00: 156301488 sectors, multi 16: LBA48 <6>ata2.00: configured for UDMA/133 <6>ata3: SATA link down (SStatus 0 SControl 300) <6>ata4: SATA link down (SStatus 0 SControl 300) <5>scsi 0:0:0:0: Direct-Access ATA WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5 <5>scsi 1:0:0:0: Direct-Access ATA ST380013AS 3.05 PQ: 0 ANSI: 5 <6>vendor=8086 device=27e2 <6>pata_marvell 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 <7>pata_marvell 0000:02:00.0: setting latency timer to 64 <6>scsi4 : pata_marvell <6>scsi5 : pata_marvell <6>ata5: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17 <6>ata6: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17 <4>BAR5:00:04 01:7F 02:22 03:C8 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00 <7>ata_piix 0000:00:1f.1: version 2.12 <6>ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 <7>ata_piix 0000:00:1f.1: setting latency timer to 64 <6>scsi6 : ata_piix <6>scsi7 : ata_piix <6>ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 <6>ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 <6>ata7: clearing spurious IRQ <6>ata7.01: ATAPI: PIONEER DVD-RW DVR-109, 1.58, max UDMA/66 <6>ata7: clearing spurious IRQ <6>ata7: clearing spurious IRQ <6>ata7.01: configured for UDMA/66 <5>scsi 6:0:1:0: CD-ROM PIONEER DVD-RW DVR-109 1.58 PQ: 0 ANSI: 5 <6>Uniform Multi-Platform E-IDE driver <6>SGI XFS with ACLs, security attributes, realtime, large block numbers, dmapi support, no debug enabled <6>SGI XFS Quota Management subsystem <6>device-mapper: uevent: version 1.0.3 <6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com <6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found <6>udevd version 128 started <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <5>sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors: (150GB/139GiB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>USB Universal Host Controller Interface driver v3.0 <6>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 <5>sd 0:0:0:0: [sda] 293046768 512-byte hardware sectors: (150GB/139GiB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sda: sda1<7>uhci_hcd 0000:00:1d.0: setting latency timer to 64 <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 <6>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000a880 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <4> sda2 <4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after <5>sd 0:0:0:0: [sda] Attached SCSI disk <5>sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0GB/74.5GiB) <5>sd 1:0:0:0: [sdb] Write Protect is off <7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0GB/74.5GiB) <5>sd 1:0:0:0: [sdb] Write Protect is off <7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sdb: sdb1 sdb2 <5>sd 1:0:0:0: [sdb] Attached SCSI disk <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: UHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.27.7-9-pae uhci_hcd <6>usb usb1: SerialNumber: 0000:00:1d.0 <6>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 <7>uhci_hcd 0000:00:1d.1: setting latency timer to 64 <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ac00 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <6>usb 1-2: new low speed USB device using uhci_hcd and address 2 <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: UHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.27.7-9-pae uhci_hcd <6>usb usb2: SerialNumber: 0000:00:1d.1 <6>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 <6>usb 1-2: configuration #1 chosen from 1 choice <6>usb 1-2: New USB device found, idVendor=045e, idProduct=0053 <6>usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 <6>usb 1-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) <6>usb 1-2: Manufacturer: Microsoft <7>uhci_hcd 0000:00:1d.2: setting latency timer to 64 <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 <6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <6>usb 2-2: new low speed USB device using uhci_hcd and address 2 <6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: UHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.27.7-9-pae uhci_hcd <6>usb usb3: SerialNumber: 0000:00:1d.2 <6>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 <7>uhci_hcd 0000:00:1d.3: setting latency timer to 64 <6>uhci_hcd 0000:00:1d.3: UHCI Host Controller <6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 <6>uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000b080 <6>usb usb4: configuration #1 chosen from 1 choice <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 2 ports detected <6>usb 2-2: configuration #1 chosen from 1 choice <6>usb 2-2: New USB device found, idVendor=051d, idProduct=0002 <6>usb 2-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 <6>usb 2-2: Product: Smart-UPS 1500 FW:601.3.D USB FW:1.5 <6>usb 2-2: Manufacturer: American Power Conversion <6>usb 2-2: SerialNumber: AS0432332333 <6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb4: Product: UHCI Host Controller <6>usb usb4: Manufacturer: Linux 2.6.27.7-9-pae uhci_hcd <6>usb usb4: SerialNumber: 0000:00:1d.3 <6>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 <7>ehci_hcd 0000:00:1d.7: setting latency timer to 64 <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 <6>ehci_hcd 0000:00:1d.7: debug port 1 <7>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported <6>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xedbff800 <6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb5: configuration #1 chosen from 1 choice <6>hub 5-0:1.0: USB hub found <6>hub 5-0:1.0: 8 ports detected <6>usb 1-2: USB disconnect, address 2 <6>usb 2-2: USB disconnect, address 2 <6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 <6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb5: Product: EHCI Host Controller <6>usb usb5: Manufacturer: Linux 2.6.27.7-9-pae ehci_hcd <6>usb usb5: SerialNumber: 0000:00:1d.7 <6>usbcore: registered new interface driver hiddev <6>usbcore: registered new interface driver usbhid <6>usbhid: v2.6:USB HID core driver <6>md: linear personality registered for level -1 <6>usb 1-2: new low speed USB device using uhci_hcd and address 3 <6>usb 1-2: configuration #1 chosen from 1 choice <6>input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input1 <6>input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2 <6>usb 1-2: New USB device found, idVendor=045e, idProduct=0053 <6>usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 <6>usb 1-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) <6>usb 1-2: Manufacturer: Microsoft <6>usb 2-2: new low speed USB device using uhci_hcd and address 3 <6>usb 2-2: configuration #1 chosen from 1 choice <6>PM: Starting manual resume from disk <5>XFS mounting filesystem dm-3 <7>Ending clean XFS mount for filesystem: dm-3 <6>hiddev96hidraw1: USB HID v1.10 Device [American Power Conversion Smart-UPS 1500 FW:601.3.D USB FW:1.5] on usb-0000:00:1d.1-2 <6>usb 2-2: New USB device found, idVendor=051d, idProduct=0002 <6>usb 2-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 <6>usb 2-2: Product: Smart-UPS 1500 FW:601.3.D USB FW:1.5 <6>usb 2-2: Manufacturer: American Power Conversion <6>usb 2-2: SerialNumber: AS0432332333 <6>udevd version 128 started <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <5>sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>sd 1:0:0:0: Attached scsi generic sg1 type 0 <5>scsi 6:0:1:0: Attached scsi generic sg2 type 5 <4>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 6:0:1:0: Attached scsi CD-ROM sr0 <6>EDAC MC: Ver: 2.1.0 Dec 5 2008 <6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 <5>intel_rng: FWH not detected <6>ACPI: Power Button (FF) [PWRF] <6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 <6>vendor=8086 device=244e <6>ohci1394 0000:01:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 <6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[edcff800-edcfffff] Max Packet=[2048] IR/IT contexts=[4/8] <6>EDAC i82975x: ECC disabled on both channels. <6>ACPI: Power Button (CM) [PWRB] <6>vendor=8086 device=27e0 <6>sky2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>sky2 0000:03:00.0: setting latency timer to 64 <6>sky2 0000:03:00.0: v1.22 addr 0xedefc000 irq 16 Yukon-2 EC rev 2 <6>sky2 eth0: addr 00:18:f3:6c:45:6e <6>Linux agpgart interface v0.103 <6>input: PC Speaker as /devices/platform/pcspkr/input/input4 <6>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23 <4>ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] <6>ACPI: Device needs an ACPI driver <6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 <6>rtc0: alarms up to one month, hpet irqs <4>nvidia: module license 'NVIDIA' taints kernel. <6>vendor=8086 device=277d <6>nvidia 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>nvidia 0000:05:00.0: setting latency timer to 64 <4>NVRM: loading NVIDIA UNIX x86 Kernel Module 180.22 Tue Jan 6 09:29:08 PST 2009 <6>iTCO_vendor_support: vendor-support=0 <6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) <6>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) <6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000e5891b] <6>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 <7>HDA Intel 0000:00:1b.0: setting latency timer to 64 <6>Adding 16777208k swap on /dev/mapper/g1-swap. Priority:-1 extents:1 across:16777208k <6>loop: module loaded <5>XFS mounting filesystem dm-1 <7>Ending clean XFS mount for filesystem: dm-1 <5>XFS mounting filesystem dm-2 <7>Ending clean XFS mount for filesystem: dm-2 <5>XFS mounting filesystem dm-5 <7>Ending clean XFS mount for filesystem: dm-5 <5>XFS mounting filesystem dm-4 <7>Ending clean XFS mount for filesystem: dm-4 <4>fuse init (API version 7.9) Kernel logging (ksyslog) stopped. Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sun Feb 15 14:57:55 2009
5 logical volume(s) in volume group "g1" now active 5 logical volume(s) in volume group "g1" now active 5 logical volume(s) in volume group "g1" now active Trying manual resume from /dev/g1/swap Invoking userspace resume from /dev/g1/swap resume: libgcrypt version: 1.4.1 Trying manual resume from /dev/g1/swap Invoking in-kernel resume from /dev/g1/swap Waiting for device /dev/g1/suse111 to appear: ok node name not found fsck 1.41.1 (01-Sep-2008) [/sbin/fsck.xfs (1) -- /] fsck.xfs -a /dev/g1/suse111 /sbin/fsck.xfs: XFS file system. fsck succeeded. Mounting root device read-write. Mounting root /dev/g1/suse111
Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Feb 15 06:57:58 2009
done Starting udevd: done Loading drivers, configuring devices: done Loading required kernel modules doneActivating swap-devices in /etc/fstab... doneSetting up the hardware clockdone Activating device mapper... done Waiting for udev to settle... Scanning for LVM volume groups... File descriptor 3 left open Reading all physical volumes. This may take a while... Found volume group "g2" using metadata type lvm2 Found volume group "g1" using metadata type lvm2 Activating LVM volume groups... File descriptor 3 left open 4 logical volume(s) in volume group "g2" now active 5 logical volume(s) in volume group "g1" now active done Checking file systems... fsck 1.41.1 (01-Sep-2008) /sbin/fsck.xfs: XFS file system. /sbin/fsck.xfs: XFS file system. /sbin/fsck.xfs: XFS file system. /sbin/fsck.xfs: XFS file system. Vboot: clean, 61/18072 files, 27454/72260 blocks Vbootbu: clean, 65/26104 files, 41110/104388 blocks donedone Mounting local file systems... /proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/sda1 on /boot type ext2 (rw) /dev/sdb1 on /bootbu type ext2 (rw) /dev/mapper/g1-common on /common type xfs (rw) /dev/mapper/g1-suse103 on /suse103 type xfs (rw) /dev/mapper/g2-suse103 on /suse103bu type xfs (rw) /dev/mapper/g1-suse111m on /suse111m type xfs (rw) doneSetting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 fs.inotify.max_user_watches = 65536 net.ipv4.conf.default.promote_secondaries = 1 net.ipv4.conf.all.promote_secondaries = 1 done Loading fuse module done Mounting fuse control filesystemdone Enabling syn flood protectiondone Disabling IP forwardingdone done <notice>killproc: kill(774,29) Creating /var/log/boot.msg doneActivating remaining swap-devices in /etc/fstab... doneSetting up hostname 'linux'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 IP address: 127.0.0.2/8 done System Boot Control: The system has been set up Skipped features: boot.cycle System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(774,3)
INIT: Boot logging started on /dev/tty1(/dev/console) at Sun Feb 15 14:58:06 2009
Entering runlevel: 5
Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/g1/suse111 _=/sbin/startproc DAEMON=/sbin/acpid ] acpid: starting up
Starting acpid done <notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/g1/suse111 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] acpid: 2 rules loaded
Initializing random number generatordone <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/g1/suse111 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog servicesdone Starting D-Bus daemondone <notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/g1/suse111 _=/sbin/startproc DAEMON=/sbin/rpcbind ] Starting rpcbind done Not starting NFS client services - no NFS found in /etc/fstab:unused Loading CPUFreq modulesdone Starting HAL daemondone Loading console font lat9w-16.psfu -m trivial G0:loadable doneLoading keymap assuming iso-8859-15 euro Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz doneLoading compose table latin1.adddone Start Unicode mode done<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/g1/suse111 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/g1/suse111 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting cupsddone Starting Name Service Cache Daemondone <notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/etc/sysconfig/network PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/g1/suse111 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ] Starting java.binfmt_misc done Starting the NetworkManagerdone Starting Avahi daemon done Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=en_US.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER= SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/g1/suse111 _=/sbin/startproc DAEMON=/usr/bin/kdm ] done Starting network time protocol daemon (NTPD)<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -g -u ntp:ntp -i /var/lib/ntp -c /etc/ntp.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/g1/suse111 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ] done <notice>checkproc: /usr/bin/kdm 2780 Starting mail service (Postfix)<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/g1/suse111 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done Starting SSH daemondone <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/g1/suse111 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting CRON daemondone Starting smartd done done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: nfs <notice>killproc: kill(2110,3) <notice>checkproc: /usr/bin/kdm 2780
Reproducible: Always
Steps to Reproduce: 1. Boot 2. 3.
https://bugzilla.novell.com/show_bug.cgi?id=476024
Jiri Srain jsrain@novell.com changed:
What |Removed |Added ---------------------------------------------------------------------------- Component|Bootloader |Kernel AssignedTo|jsrain@novell.com |bnc-team-screening@forge.pr | |ovo.novell.com QAContact|jsrain@novell.com |qa@suse.de
https://bugzilla.novell.com/show_bug.cgi?id=476024
Chuanye Han cyhan@novell.com changed:
What |Removed |Added ---------------------------------------------------------------------------- CC| |cyhan@novell.com AssignedTo|bnc-team-screening@forge.pr |hare@novell.com |ovo.novell.com |
https://bugzilla.novell.com/show_bug.cgi?id=476024
User hare@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=476024#c1
Hannes Reinecke hare@novell.com changed:
What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|hare@novell.com |ro@novell.com
--- Comment #1 from Hannes Reinecke hare@novell.com 2009-02-27 03:16:32 MST --- Don't know. Rudi?
https://bugzilla.novell.com/show_bug.cgi?id=476024
User ro@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=476024#c2
Ruediger Oertel ro@novell.com changed:
What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|ro@novell.com |hare@novell.com
--- Comment #2 from Ruediger Oertel ro@novell.com 2009-02-27 05:51:17 MST --- I see the same message during boot here. The file is missing in the initrd, /lib/mkinitrd/scripts/setup-prepare.sh does try to find the file and puts it in $map, but the variable does not seem to be used anywhere.
My system boots fine however, so we see two diffferent problems here.
a) missing System.map* file b) system not booting correctly (the initial comment does not fully state it but I think kdm is not coming up, which may be Xserver related, so /var/log/Xorg.0.log would be interesting)
Hannes: can you take care of (a) first.
https://bugzilla.novell.com/show_bug.cgi?id=476024
User mario_bz@mgtech.com added comment https://bugzilla.novell.com/show_bug.cgi?id=476024#c3
--- Comment #3 from Mario Guzman mario_bz@mgtech.com 2009-02-27 09:18:22 MST --- Xorg.0.log:
X.Org X Server 1.5.2 Release Date: 10 October 2008 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux linux 2.6.27.7-9-pae #1 SMP 2008-12-04 18:10:04 +0100 i686 Build Date: 03 December 2008 09:21:06AM
Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 27 08:06:29 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout[all]" (**) |-->Screen "Screen[0]" (0) (**) | |-->Monitor "Monitor[0]" (**) | |-->Device "Device[0]" (**) |-->Input Device "Keyboard[0]" (**) |-->Input Device "Mouse[1]" (**) Option "ZapWarning" "on" (**) Option "AllowMouseOpenFail" "on" (**) Option "Xinerama" "off" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/local" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/PEX" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/latin2/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/latin2/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/latin2/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/latin2/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/latin7/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/baekmuk" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/japanese" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/kwintv" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/uni" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/CID" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ucs/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ucs/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ucs/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/hellas/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/hellas/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/hellas/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/hellas/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/xtest" does not exist. Entry deleted from font path. (==) Including the default font path /usr/share/fonts/misc:unscaled,/usr/share/fonts/TTF/,/usr/share/fonts/OTF,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled. (**) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/Type1, /usr/share/fonts/URW, /usr/share/fonts/Speedo, /usr/share/fonts/cyrillic, /usr/share/fonts/truetype, /opt/kde3/share/fonts, /usr/share/fonts/misc:unscaled, /usr/share/fonts/TTF/, /usr/share/fonts/OTF, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled (**) Input device list set to "/dev/gpmdata,/dev/input/mice" (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules" (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x81f45c0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 4.1 X.Org XInput driver : 2.1 X.Org Server Extension : 1.1 X.Org Font Renderer : 0.6 (II) Loader running on linux (++) using VT number 7
(--) PCI:*(0@5:0:0) unknown vendor (0x10de) unknown chipset (0x0295) rev 161, Mem @ 0xef000000/0, 0xd0000000/0, 0xee000000/0, I/O @ 0x0000ec00/0, BIOS @ 0x????????/131072 (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "freetype" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules//extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.5.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.6 (II) Loading font FreeType (II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules//extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/updates//extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 180.29 Thu Feb 5 00:14:00 PST 2009 (II) Loading extension GLX (II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules//extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension RECORD (II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules//extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/updates//drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules//input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.3.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules//input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.3.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (II) NVIDIA dlloader X Driver 180.29 Wed Feb 4 23:50:44 PST 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 05@00:00:0 (II) Loading sub module "fb" (II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "wfb" (II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so (II) Module wfb: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU GeForce 7950 GT (G71) at PCI:5:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 05.71.22.42.06 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on GeForce 7950 GT at PCI:5:0:0: (--) NVIDIA(0): Samsung SyncMaster (DFP-1) (--) NVIDIA(0): Samsung SyncMaster (DFP-1): 330.0 MHz maximum pixel clock (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal Dual Link TMDS (II) NVIDIA(0): Assigned Display Device: DFP-1 (WW) NVIDIA(0): No valid modes for "default"; removing. (WW) NVIDIA(0): (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode (WW) NVIDIA(0): "nvidia-auto-select". (WW) NVIDIA(0): (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select" (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050 (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (==) NVIDIA(0): Disabling shared memory pixmaps (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (II) Loading extension XINERAMA (WW) NVIDIA(0): Option "CalcAlgorithm" is not used (WW) NVIDIA(0): Option "PreferredMode" is not used (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (**) Option "CoreKeyboard" (**) Keyboard[0]: always reports core events (**) Option "Protocol" "Standard" (**) Keyboard[0]: Protocol: Standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) Keyboard[0]: XkbRules: "xfree86" (**) Option "XkbModel" "microsoftpro" (**) Keyboard[0]: XkbModel: "microsoftpro" (**) Option "XkbLayout" "us" (**) Keyboard[0]: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard[0]: CustomKeycodes disabled (**) Option "Protocol" "explorerps/2" (**) Mouse[1]: Device: "/dev/input/mice" (**) Mouse[1]: Protocol: "explorerps/2" (**) Option "CorePointer" (**) Mouse[1]: always reports core events (**) Option "Device" "/dev/input/mice" (**) Option "Buttons" "5" (==) Mouse[1]: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse[1]: ZAxisMapping: buttons 4 and 5 (**) Mouse[1]: Buttons: 9 (**) Mouse[1]: Sensitivity: 1 (II) evaluating device (Keyboard[0]) (II) XINPUT: Adding extended input device "Keyboard[0]" (type: KEYBOARD) (II) evaluating device (Mouse[1]) (II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE) (II) Mouse[1]: ps2EnableDataReporting: succeeded Could not init font path element /usr/share/fonts/TTF/, removing from list! Could not init font path element /usr/share/fonts/OTF, removing from list!
https://bugzilla.novell.com/show_bug.cgi?id=476024
User hare@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=476024#c4
Hannes Reinecke hare@novell.com changed:
What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |mario_bz@mgtech.com
--- Comment #4 from Hannes Reinecke hare@novell.com 2009-03-02 01:56:13 MST --- Ad comment #2:
I see the same message during boot here. The file is missing in the initrd, /lib/mkinitrd/scripts/setup-prepare.sh does try to find the file and puts it in $map, but the variable does not seem to be used anywhere.
It is. It's used in /lib/mkinitrd/scripts/setup-modules.sh, to be able to run 'depmod' on the installed modules.
My system boots fine however, so we see two diffferent problems here.
a) missing System.map* file b) system not booting correctly (the initial comment does not fully state it but I think kdm is not coming up, which may be Xserver related, so /var/log/Xorg.0.log would be interesting)
Hannes: can you take care of (a) first.
Well, if the scripts report '/boot/System.map-XXX not found' there might be a simple reason for it. Please post the output of 'ls -l /boot' here.
-
bugzilla_noreply＠novell.com