[Bug 581568] New: Black screen after installing x86_64 with nvidia 8500gt video card
http://bugzilla.novell.com/show_bug.cgi?id=581568 http://bugzilla.novell.com/show_bug.cgi?id=581568#c0 Summary: Black screen after installing x86_64 with nvidia 8500gt video card Classification: openSUSE Product: openSUSE 11.3 Version: Milestone 1 Platform: 64bit OS/Version: openSUSE 11.3 Status: NEW Severity: Critical Priority: P5 - None Component: SaX2 AssignedTo: bnc-team-xorg-bugs@forge.provo.novell.com ReportedBy: ganncorn@yahoo.com.au QAContact: sax2-maintainer-bugs@forge.provo.novell.com Found By: Community User Blocker: --- At start of install get dos type screeen. Use keyboard to load kernel. Normal install from there (standard kde) to system reboot. After reboot have black screen with a few green dots. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=581568
http://bugzilla.novell.com/show_bug.cgi?id=581568#c
Stefan Dirsch
http://bugzilla.novell.com/show_bug.cgi?id=581568
http://bugzilla.novell.com/show_bug.cgi?id=581568#c1
Stefan Dirsch
http://bugzilla.novell.com/show_bug.cgi?id=581568
http://bugzilla.novell.com/show_bug.cgi?id=581568#c2
Stewart Lewis
Would it be possible to provide the required information according to our HOWTO
for reporting X11 related bugs? Please set the Status back to ASSIGNED after providing all the required information. Thanks.
Info requested follows. Also after 3 reboots with the pc all with different bit on the screen I found I could boot into safe mode so the following data was obtained in safe mode copied to kwrite the burnt to a cd-rw with k3b. The hwinfo is accurate with both monitor & video card. Also m/b Asus p5ql pro cpu intel d/c E6300 2.8GHz mem 1Gb 667 ddr2 hdd 5X wd sata dvd pioneer sata THis hardware also runs both 11.1 & 11.2 x86_64 releases with no problems. Regards. -------------------------------------------- hwinfo ------- linux-ig9t:~ # hwinfo -gfx oops: don't know what to do with "gfx" linux-ig9t:~ # hwinfo-gfx If 'hwinfo-gfx' is not a typo you can use command-not-found to lookup the package that contains it, like this: cnf hwinfo-gfx linux-ig9t:~ # hwinfo --gfx 27: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_10de_421 Unique ID: VCu0.8LJ+yk5NINB Parent ID: vSkL.Kc6JobdJb09 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "nVidia GeForce 8500 GT" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0421 "GeForce 8500 GT" SubVendor: pci 0x1682 "XFX Pine Group Inc." SubDevice: pci 0x230a Revision: 0xa1 Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable) Memory Range: 0xd0000000-0xdfffffff (rw,prefetchable) Memory Range: 0xfa000000-0xfbffffff (rw,non-prefetchable) I/O Ports: 0xcc00-0xcc7f (rw) Memory Range: 0xfe9e0000-0xfe9fffff (ro,prefetchable,disabled) IRQ: 10 (no events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v000010DEd00000421sv00001682sd0000230Abc03sc00i00" Driver Info #0: XFree86 v4 Server Module: nv Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #9 (PCI bridge) Primary display adapter: #27 linux-ig9t:~ # hwinfo --monitor 30: None 00.0: 10000 Monitor [Created at monitor.95] Unique ID: rdCR.AhV+TrLBD1F Hardware Class: monitor Model: "ASUS VW192T" Vendor: ACI Device: eisa 0x19a2 "ASUS VW192T" Serial ID: "74LV016971" Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@67Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@72Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1280x1024@60Hz Resolution: 1152x864@75Hz Resolution: 1440x900@60Hz Size: 410x256 mm Detailed Timings #0: Resolution: 1440x900 Horizontal: 1440 1520 1672 1904 (+80 +232 +464) +hsync Vertical: 900 903 909 934 (+3 +9 +34) -vsync Frequencies: 106.00 MHz, 55.67 kHz, 59.61 Hz Driver Info #0: Max. Resolution: 1280x1024 Vert. Sync Range: 50-75 Hz Hor. Sync Range: 30-82 kHz Bandwidth: 106 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown linux-ig9t:~ # -------------------------------------------------------------------------- Xorg files ------------- xorg.conf.install file ------------------- Section "Device" Identifier "vboxvideo" Driver "vboxvideo" EndSection Section "Screen" Identifier "vboxvideo" Device "vboxvideo" EndSection Section "Device" Identifier "vmware" Driver "vmware" EndSection Section "Screen" Identifier "vmware" Device "vmware" EndSection Section "Device" Identifier "cirrus" Driver "cirrus" EndSection Section "Screen" Identifier "cirrus" Device "cirrus" EndSection ---------------------------------------------------------------------------------------------- Xorg.0.log file ------------------------- X.Org X Server 1.7.4 Release Date: 2010-01-08 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux linux-ig9t 2.6.32-3-desktop #1 SMP PREEMPT 2009-12-04 00:41:46 +0100 x86_64 Kernel command line: root=/dev/disk/by-id/ata-WDC_WD740GD-00FLA1_WD-WMAKE1805620-part1 apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x31a Build Date: 25 January 2010 12:47:13AM Current version of pixman: 0.17.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 20 17:41:41 2010 (==) Using config file: "/etc/X11/xorg.conf.install" (==) ServerLayout "Layout" (**) |-->Screen "vboxvideo" (0) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "vboxvideo" (==) No monitor specified for screen "vboxvideo". Using a default monitor configuration. (**) |-->Screen "vmware" (1) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "vmware" (==) No monitor specified for screen "vmware". Using a default monitor configuration. (**) |-->Screen "cirrus" (2) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "cirrus" (==) No monitor specified for screen "cirrus". Using a default monitor configuration. (**) |-->Screen "fbdev" (3) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "fbdev" (==) No monitor specified for screen "fbdev". Using a default monitor configuration. (**) |-->Screen "vesa" (4) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "vesa" (==) No monitor specified for screen "vesa". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/URW, /usr/share/fonts/cyrillic (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AutoAddDevices. (II) Loader magic: 0x7c4640 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:1:0:0) 10de:0421:1682:230a rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "vboxvideo" (WW) Warning, couldn't open module vboxvideo (II) UnloadModule: "vboxvideo" (EE) Failed to load module "vboxvideo" (module does not exist, 0) (II) LoadModule: "vmware" (II) Loading /usr/lib64/xorg/modules/drivers/vmware_drv.so (II) Module vmware: vendor="X.Org Foundation" compiled for 1.7.4, module version = 10.16.9 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "cirrus" (II) Loading /usr/lib64/xorg/modules/drivers/cirrus_drv.so (II) Module cirrus: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.3.2 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.4, module version = 0.4.1 ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "vesa" (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.4, module version = 2.2.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) VMWARE: driver for VMware SVGA: vmware0405, vmware0710 (II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8, CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD, CL-GD5465, CL-GD7548 (II) FBDEV: driver for framebuffer: fbdev (II) VESA: driver for VESA chipsets: vesa (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for cirrus (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib64/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.7.4, module version = 0.0.2 ABI class: X.Org Video Driver, version 6.0 (**) FBDEV(0): claimed PCI slot 1@0:0:0 (II) FBDEV(0): using default device (WW) Falling back to old probe method for vesa (II) FBDEV(0): Creating default Display subsection in Screen section "fbdev" for depth/fbbpp 16/16 (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16 (==) FBDEV(0): RGB weight 565 (==) FBDEV(0): Default visual is TrueColor (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0) (II) FBDEV(0): hardware: VESA VGA (video memory: 5120kB) (II) FBDEV(0): checking modes against framebuffer device... (II) FBDEV(0): checking modes against monitor... (--) FBDEV(0): Virtual size is 1280x1024 (pitch 1280) (**) FBDEV(0): Built-in mode "current": 131.1 MHz, 80.3 kHz, 76.6 Hz (II) FBDEV(0): Modeline "current"x0.0 131.09 1280 1312 1472 1632 1024 1028 1032 1048 -hsync -vsync -csync (80.3 kHz) (==) FBDEV(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (**) FBDEV(0): using shadow framebuffer (II) Loading sub module "shadow" (II) LoadModule: "shadow" (II) Loading /usr/lib64/xorg/modules/libshadow.so (II) Module shadow: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.1.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) UnloadModule: "vmware" (II) Unloading /usr/lib64/xorg/modules/drivers/vmware_drv.so (II) UnloadModule: "cirrus" (II) Unloading /usr/lib64/xorg/modules/drivers/cirrus_drv.so (II) UnloadModule: "vesa" (II) Unloading /usr/lib64/xorg/modules/drivers/vesa_drv.so (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel) (==) FBDEV(0): Backing store disabled (==) FBDEV(0): DPMS enabled (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE record: RECORD extension enabled at configure time. record: This extension is known to be broken, disabling extension now.. record: http://bugs.freedesktop.org/show_bug.cgi?id=20500 (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel) (EE) config/hal: couldn't initialise context: unknown error (null) (II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse (II) LoadModule: "evdev" (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.4, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) ImPS/2 Generic Wheel Mouse: always reports core events (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event1" (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s) (II) ImPS/2 Generic Wheel Mouse: Found relative axes (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5 (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE) (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1 (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0 (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes. (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event2" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event3" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" ---------------------------------------------------------------------------------------------------- Xorg.0.log.old X.Org X Server 1.7.4 Release Date: 2010-01-08 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux linux-ig9t 2.6.32-3-desktop #1 SMP PREEMPT 2009-12-04 00:41:46 +0100 x86_64 Kernel command line: root=/dev/disk/by-id/ata-WDC_WD740GD-00FLA1_WD-WMAKE1805620-part1 resume=/dev/disk/by-id/ata-WDC_WD740GD-00FLA1_WD-WMAKE1805620-part2 splash=silent quiet vga=0x31a Build Date: 25 January 2010 12:47:13AM Current version of pixman: 0.17.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 20 17:39:52 2010 (II) Loader magic: 0x7c4640 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:1:0:0) 10de:0421:1682:230a rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072 (==) Using default built-in configuration (48 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default nvidia Device 0" Driver "nvidia" EndSection Section "Screen" Identifier "Builtin Default nvidia Screen 0" Device "Builtin Default nvidia Device 0" EndSection Section "Device" Identifier "Builtin Default nouveau Device 0" Driver "nouveau" EndSection Section "Screen" Identifier "Builtin Default nouveau Screen 0" Device "Builtin Default nouveau Device 0" EndSection Section "Device" Identifier "Builtin Default nv Device 0" Driver "nv" EndSection Section "Screen" Identifier "Builtin Default nv Screen 0" Device "Builtin Default nv Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default nvidia Screen 0" Screen "Builtin Default nouveau Screen 0" Screen "Builtin Default nv Screen 0" Screen "Builtin Default fbdev Screen 0" Screen "Builtin Default vesa Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default nvidia Screen 0" (0) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default nvidia Device 0" (==) No monitor specified for screen "Builtin Default nvidia Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default nouveau Screen 0" (1) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default nouveau Device 0" (==) No monitor specified for screen "Builtin Default nouveau Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default nv Screen 0" (2) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default nv Device 0" (==) No monitor specified for screen "Builtin Default nv Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (3) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (4) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/URW, /usr/share/fonts/cyrillic (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AutoAddDevices. (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "nvidia" (WW) Warning, couldn't open module nvidia (II) UnloadModule: "nvidia" (EE) Failed to load module "nvidia" (module does not exist, 0) (II) LoadModule: "nouveau" (WW) Warning, couldn't open module nouveau (II) UnloadModule: "nouveau" (EE) Failed to load module "nouveau" (module does not exist, 0) (II) LoadModule: "nv" (II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so (II) Module nv: vendor="X.Org Foundation" compiled for 1.7.4, module version = 2.1.16 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.4, module version = 0.4.1 ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "vesa" (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.4, module version = 2.2.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2, Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go, GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420, GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go, GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL, GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL, GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X, GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL, Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI, GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL, Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X, GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL, Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra, GeForce FX 5800, Quadro FX 2000, Quadro FX 1000, GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT, GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700, GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250, GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M, Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI, GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra, GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra, GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700, GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE, GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700, Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800, GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT, GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000, GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT, GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400, Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT, GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600, GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL, GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550, Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500, GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM), GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400, GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX, GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800, GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE, GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2, GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150, Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100, GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400, GeForce 6100 nForce 420, GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS, GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M, Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260, GeForce GTX 285, GeForce GTX 275, GeForce GTX 295, Quadro CX, Quadro FX 5800, Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512, GeForce 9800 GT, GeForce 8800 GT, GeForce 9800 GX2, GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX, GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT, GeForce 8800M GTX, GeForce 8800 GS, GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX, GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250, GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 3700, Quadro FX 3600M, Quadro FX 2800M, Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS, GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140, GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS, GeForce 9800M GTS, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT, GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT, GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce GT 130M, GeForce 9500 GT, Quadro FX 380, Quadro FX 580, Quadro FX 1700M, Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS, GeForce G100, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M, GeForce G 105M, GeForce G 103M, Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro NVS 295, GeForce GT 220, GeForce 210, GeForce GT 230M, GeForce GT 240M, GeForce G210, GeForce 205, GeForce 310, GeForce 210, GeForce 310, GeForce G210M, Quadro FX 380 LP, GeForce GT 240, GeForce GTS 260M, GeForce GTS 250M (II) FBDEV: driver for framebuffer: fbdev (II) VESA: driver for VESA chipsets: vesa (II) Primary Device is: PCI 01@00:00:0 (--) NV: Found NVIDIA GeForce 8500 GT at 01@00:00:0 (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib64/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.7.4, module version = 0.0.2 ABI class: X.Org Video Driver, version 6.0 (WW) Falling back to old probe method for vesa (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib64/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Video Driver, version 6.0 (II) NV(0): Initializing int10 (II) NV(0): Primary V_BIOS segment is: 0xc000 (--) NV(0): Console is VGA mode 0x11a (II) NV(0): Creating default Display subsection in Screen section "Builtin Default nv Screen 0" for depth/fbbpp 24/32 (==) NV(0): Depth 24, (--) framebuffer bpp 32 (==) NV(0): RGB weight 888 (==) NV(0): Default visual is TrueColor (==) NV(0): Using hardware cursor (==) NV(0): Using gamma correction (1.0, 1.0, 1.0) (II) NV(0): MMIO registers mapped at 0x7fb994ba7000 (--) NV(0): Total video RAM: 256.0 MB (--) NV(0): BAR1 size: 256.0 MB (--) NV(0): Mapped memory: 255.0 MB (II) NV(0): Linear framebuffer mapped at 0x7fb984ca7000 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (--) NV(0): Connector map: (--) NV(0): Bus 0 -> DAC1 (--) NV(0): Bus 1 -> DAC2 (--) NV(0): Bus 1 -> SOR1 (--) NV(0): Load detection: 340 (II) NV(0): I2C bus "I2C0" initialized. (II) NV(0): Output VGA1 has no monitor section (II) NV(0): I2C bus "I2C1" initialized. (II) NV(0): Output VGA2 has no monitor section (II) NV(0): Output DVI1 has no monitor section (II) NV(0): Probing for EDID on I2C bus 0... (II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0. (II) NV(0): I2C device "I2C0:DDC control interface" registered at address 0x6E. (--) NV(0): DDC detected a CRT: (II) NV(0): Manufacturer: ACI Model: 19a2 Serial#: 16843009 (II) NV(0): Year: 2007 Week: 15 (II) NV(0): EDID Version: 1.3 (II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) NV(0): Sync: Separate Composite SyncOnGreen (II) NV(0): Max Image Size [cm]: horiz.: 43 vert.: 27 (II) NV(0): Gamma: 2.20 (II) NV(0): DPMS capabilities: Off; RGB/Color Display (II) NV(0): Default color space is primary color space (II) NV(0): First detailed timing is preferred mode (II) NV(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.610 (II) NV(0): blueX: 0.150 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 (II) NV(0): Supported established timings: (II) NV(0): 720x400@70Hz (II) NV(0): 640x480@60Hz (II) NV(0): 640x480@67Hz (II) NV(0): 640x480@72Hz (II) NV(0): 640x480@75Hz (II) NV(0): 800x600@56Hz (II) NV(0): 800x600@60Hz (II) NV(0): 800x600@72Hz (II) NV(0): 800x600@75Hz (II) NV(0): 832x624@75Hz (II) NV(0): 1024x768@60Hz (II) NV(0): 1024x768@70Hz (II) NV(0): 1024x768@75Hz (II) NV(0): 1280x1024@75Hz (II) NV(0): 1152x864@75Hz (II) NV(0): Manufacturer's mask: 0 (II) NV(0): Supported standard timings: (II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) NV(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) NV(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) NV(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989 (II) NV(0): Supported detailed timing: (II) NV(0): clock: 106.0 MHz Image Size: 410 x 256 mm (II) NV(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0 (II) NV(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0 (II) NV(0): Serial No: 74LV016971 (II) NV(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 210 MHz (II) NV(0): Monitor name: ASUS VW192T�� (II) NV(0): EDID (in hex): (II) NV(0): 00ffffffffffff000469a21901010101 (II) NV(0): 0f1101030e2b1b782ec585a3574a9c26 (II) NV(0): 125054bfef808180714f9500950f0101 (II) NV(0): 0101010101016829a0d0518422305098 (II) NV(0): 36009a001100001c000000ff0037344c (II) NV(0): 563031363937310a2020000000fd0032 (II) NV(0): 4b1e5215000a202020202020000000fc (II) NV(0): 004153555320565731393254ffff002f (--) NV(0): Trying load detection on VGA1 ... found one! (II) NV(0): EDID vendor "ACI", prod id 6562 (II) NV(0): Using EDID range info for horizontal sync (II) NV(0): Using EDID range info for vertical refresh (II) NV(0): Printing DDC gathered Modelines: (II) NV(0): Modeline "1440x900"x0.0 106.00 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.7 kHz) (II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) NV(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) NV(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) NV(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) NV(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz) (II) NV(0): EDID vendor "ACI", prod id 6562 (II) NV(0): Probing for EDID on I2C bus 1... (II) NV(0): I2C device "I2C1:ddc2" registered at address 0xA0. (II) NV(0): ... none found (--) NV(0): Trying load detection on VGA2 ... nothing. (II) NV(0): Output VGA1 connected (II) NV(0): Output VGA2 disconnected (II) NV(0): Output DVI1 disconnected (II) NV(0): Using exact sizes for initial modes (II) NV(0): Output VGA1 using initial mode 1440x900 (II) NV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (--) NV(0): Virtual size is 3840x1920 (pitch 3840) (**) NV(0): Driver mode "1440x900": 106.0 MHz (scaled from 0.0 MHz), 55.7 kHz, 59.6 Hz (II) NV(0): Modeline "1440x900"x59.6 106.00 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.7 kHz) (**) NV(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz (II) NV(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (**) NV(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (II) NV(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (**) NV(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz (II) NV(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz) (**) NV(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz (II) NV(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (**) NV(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz (II) NV(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (**) NV(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz (II) NV(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (**) NV(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz (II) NV(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**) NV(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) NV(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz (II) NV(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (**) NV(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz (II) NV(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (**) NV(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (II) NV(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (**) NV(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz (II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) NV(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz (II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) NV(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz (II) NV(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (**) NV(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz (II) NV(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (**) NV(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz (II) NV(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (**) NV(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz (II) NV(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) NV(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz (II) NV(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (**) NV(0): Display dimensions: (430, 270) mm (**) NV(0): DPI set to (85, 84) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib64/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.2.1 ABI class: X.Org Video Driver, version 6.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) UnloadModule: "fbdev" (II) Unloading /usr/lib64/xorg/modules/drivers/fbdev_drv.so (II) UnloadModule: "fbdevhw" (II) Unloading /usr/lib64/xorg/modules/linux/libfbdevhw.so (II) UnloadModule: "vesa" (II) Unloading /usr/lib64/xorg/modules/drivers/vesa_drv.so (--) Depth 24 pixmap format is 32 bpp (--) NV(0): 226.82 MB available for offscreen pixmaps (II) NV(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Scanline Image Writes Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots (==) NV(0): Backing store disabled (==) NV(0): Silken mouse enabled (==) NV(0): DPMS enabled (II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message. (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE record: RECORD extension enabled at configure time. record: This extension is known to be broken, disabling extension now.. record: http://bugs.freedesktop.org/show_bug.cgi?id=20500 (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) NV(0): Setting screen physical size to 381 x 238 (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse (II) LoadModule: "evdev" (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.4, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) ImPS/2 Generic Wheel Mouse: always reports core events (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event1" (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s) (II) ImPS/2 Generic Wheel Mouse: Found relative axes (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5 (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE) (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1 (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0 (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes. (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event3" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event4" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) NV(0): Probing for EDID on I2C bus 0... (--) NV(0): DDC detected a CRT: (II) NV(0): Manufacturer: ACI Model: 19a2 Serial#: 16843009 (II) NV(0): Year: 2007 Week: 15 (II) NV(0): EDID Version: 1.3 (II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) NV(0): Sync: Separate Composite SyncOnGreen (II) NV(0): Max Image Size [cm]: horiz.: 43 vert.: 27 (II) NV(0): Gamma: 2.20 (II) NV(0): DPMS capabilities: Off; RGB/Color Display (II) NV(0): Default color space is primary color space (II) NV(0): First detailed timing is preferred mode (II) NV(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.610 (II) NV(0): blueX: 0.150 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 (II) NV(0): Supported established timings: (II) NV(0): 720x400@70Hz (II) NV(0): 640x480@60Hz (II) NV(0): 640x480@67Hz (II) NV(0): 640x480@72Hz (II) NV(0): 640x480@75Hz (II) NV(0): 800x600@56Hz (II) NV(0): 800x600@60Hz (II) NV(0): 800x600@72Hz (II) NV(0): 800x600@75Hz (II) NV(0): 832x624@75Hz (II) NV(0): 1024x768@60Hz (II) NV(0): 1024x768@70Hz (II) NV(0): 1024x768@75Hz (II) NV(0): 1280x1024@75Hz (II) NV(0): 1152x864@75Hz (II) NV(0): Manufacturer's mask: 0 (II) NV(0): Supported standard timings: (II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) NV(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) NV(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) NV(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989 (II) NV(0): Supported detailed timing: (II) NV(0): clock: 106.0 MHz Image Size: 410 x 256 mm (II) NV(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0 (II) NV(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0 (II) NV(0): Serial No: 74LV016971 (II) NV(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 210 MHz (II) NV(0): Monitor name: ASUS VW192T�� (II) NV(0): EDID (in hex): (II) NV(0): 00ffffffffffff000469a21901010101 (II) NV(0): 0f1101030e2b1b782ec585a3574a9c26 (II) NV(0): 125054bfef808180714f9500950f0101 (II) NV(0): 0101010101016829a0d0518422305098 (II) NV(0): 36009a001100001c000000ff0037344c (II) NV(0): 563031363937310a2020000000fd0032 (II) NV(0): 4b1e5215000a202020202020000000fc (II) NV(0): 004153555320565731393254ffff002f (--) NV(0): Trying load detection on VGA1 ... found one! (II) NV(0): EDID vendor "ACI", prod id 6562 (II) NV(0): Using hsync ranges from config file (II) NV(0): Using vrefresh ranges from config file (II) NV(0): Printing DDC gathered Modelines: (II) NV(0): Modeline "1440x900"x0.0 106.00 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.7 kHz) (II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) NV(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) NV(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) NV(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) NV(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz) (II) NV(0): EDID vendor "ACI", prod id 6562 (II) NV(0): Probing for EDID on I2C bus 1... (II) NV(0): ... none found (--) NV(0): Trying load detection on VGA2 ... nothing. (II) NV(0): Probing for EDID on I2C bus 0... (--) NV(0): DDC detected a CRT: (II) NV(0): Manufacturer: ACI Model: 19a2 Serial#: 16843009 (II) NV(0): Year: 2007 Week: 15 (II) NV(0): EDID Version: 1.3 (II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) NV(0): Sync: Separate Composite SyncOnGreen (II) NV(0): Max Image Size [cm]: horiz.: 43 vert.: 27 (II) NV(0): Gamma: 2.20 (II) NV(0): DPMS capabilities: Off; RGB/Color Display (II) NV(0): Default color space is primary color space (II) NV(0): First detailed timing is preferred mode (II) NV(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.610 (II) NV(0): blueX: 0.150 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 (II) NV(0): Supported established timings: (II) NV(0): 720x400@70Hz (II) NV(0): 640x480@60Hz (II) NV(0): 640x480@67Hz (II) NV(0): 640x480@72Hz (II) NV(0): 640x480@75Hz (II) NV(0): 800x600@56Hz (II) NV(0): 800x600@60Hz (II) NV(0): 800x600@72Hz (II) NV(0): 800x600@75Hz (II) NV(0): 832x624@75Hz (II) NV(0): 1024x768@60Hz (II) NV(0): 1024x768@70Hz (II) NV(0): 1024x768@75Hz (II) NV(0): 1280x1024@75Hz (II) NV(0): 1152x864@75Hz (II) NV(0): Manufacturer's mask: 0 (II) NV(0): Supported standard timings: (II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) NV(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) NV(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) NV(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989 (II) NV(0): Supported detailed timing: (II) NV(0): clock: 106.0 MHz Image Size: 410 x 256 mm (II) NV(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0 (II) NV(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0 (II) NV(0): Serial No: 74LV016971 (II) NV(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 210 MHz (II) NV(0): Monitor name: ASUS VW192T�� (II) NV(0): EDID (in hex): (II) NV(0): 00ffffffffffff000469a21901010101 (II) NV(0): 0f1101030e2b1b782ec585a3574a9c26 (II) NV(0): 125054bfef808180714f9500950f0101 (II) NV(0): 0101010101016829a0d0518422305098 (II) NV(0): 36009a001100001c000000ff0037344c (II) NV(0): 563031363937310a2020000000fd0032 (II) NV(0): 4b1e5215000a202020202020000000fc (II) NV(0): 004153555320565731393254ffff002f (--) NV(0): Trying load detection on VGA1 ... found one! (II) NV(0): EDID vendor "ACI", prod id 6562 (II) NV(0): Using hsync ranges from config file (II) NV(0): Using vrefresh ranges from config file (II) NV(0): Printing DDC gathered Modelines: (II) NV(0): Modeline "1440x900"x0.0 106.00 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.7 kHz) (II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) NV(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) NV(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) NV(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) NV(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz) (II) NV(0): EDID vendor "ACI", prod id 6562 (II) NV(0): Probing for EDID on I2C bus 1... (II) NV(0): ... none found (--) NV(0): Trying load detection on VGA2 ... nothing. (II) NV(0): Probing for EDID on I2C bus 0... (--) NV(0): DDC detected a CRT: (II) NV(0): Manufacturer: ACI Model: 19a2 Serial#: 16843009 (II) NV(0): Year: 2007 Week: 15 (II) NV(0): EDID Version: 1.3 (II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) NV(0): Sync: Separate Composite SyncOnGreen (II) NV(0): Max Image Size [cm]: horiz.: 43 vert.: 27 (II) NV(0): Gamma: 2.20 (II) NV(0): DPMS capabilities: Off; RGB/Color Display (II) NV(0): Default color space is primary color space (II) NV(0): First detailed timing is preferred mode (II) NV(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.610 (II) NV(0): blueX: 0.150 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 (II) NV(0): Supported established timings: (II) NV(0): 720x400@70Hz (II) NV(0): 640x480@60Hz (II) NV(0): 640x480@67Hz (II) NV(0): 640x480@72Hz (II) NV(0): 640x480@75Hz (II) NV(0): 800x600@56Hz (II) NV(0): 800x600@60Hz (II) NV(0): 800x600@72Hz (II) NV(0): 800x600@75Hz (II) NV(0): 832x624@75Hz (II) NV(0): 1024x768@60Hz (II) NV(0): 1024x768@70Hz (II) NV(0): 1024x768@75Hz (II) NV(0): 1280x1024@75Hz (II) NV(0): 1152x864@75Hz (II) NV(0): Manufacturer's mask: 0 (II) NV(0): Supported standard timings: (II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) NV(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) NV(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) NV(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989 (II) NV(0): Supported detailed timing: (II) NV(0): clock: 106.0 MHz Image Size: 410 x 256 mm (II) NV(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0 (II) NV(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0 (II) NV(0): Serial No: 74LV016971 (II) NV(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 210 MHz (II) NV(0): Monitor name: ASUS VW192T�� (II) NV(0): EDID (in hex): (II) NV(0): 00ffffffffffff000469a21901010101 (II) NV(0): 0f1101030e2b1b782ec585a3574a9c26 (II) NV(0): 125054bfef808180714f9500950f0101 (II) NV(0): 0101010101016829a0d0518422305098 (II) NV(0): 36009a001100001c000000ff0037344c (II) NV(0): 563031363937310a2020000000fd0032 (II) NV(0): 4b1e5215000a202020202020000000fc (II) NV(0): 004153555320565731393254ffff002f (--) NV(0): Trying load detection on VGA1 ... found one! (II) NV(0): EDID vendor "ACI", prod id 6562 (II) NV(0): Using hsync ranges from config file (II) NV(0): Using vrefresh ranges from config file (II) NV(0): Printing DDC gathered Modelines: (II) NV(0): Modeline "1440x900"x0.0 106.00 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.7 kHz) (II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) NV(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) NV(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) NV(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) NV(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz) (II) NV(0): EDID vendor "ACI", prod id 6562 (II) NV(0): Probing for EDID on I2C bus 1... (II) NV(0): ... none found (--) NV(0): Trying load detection on VGA2 ... nothing. ------------------------------------------------------------------------------------------------- -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=581568
http://bugzilla.novell.com/show_bug.cgi?id=581568#c3
Stefan Dirsch
http://bugzilla.novell.com/show_bug.cgi?id=581568
http://bugzilla.novell.com/show_bug.cgi?id=581568#c
Stefan Dirsch
http://bugzilla.novell.com/show_bug.cgi?id=581568
http://bugzilla.novell.com/show_bug.cgi?id=581568#c4
--- Comment #4 from Stefan Dirsch
http://bugzilla.novell.com/show_bug.cgi?id=581568
http://bugzilla.novell.com/show_bug.cgi?id=581568#c5
--- Comment #5 from Stewart Lewis
That's possibly a duplicate of Bug #577140.
It has somethings in common with 577140. I had the rainbow screen 3 times and managed to get into sax2 on the last time. It was very hard to see and I think I changed the refresh from 77Hz to auto. Whatever happened I now get a pure black screen with a mouse cursor. In safe mode the installation runs very well. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=581568
http://bugzilla.novell.com/show_bug.cgi?id=581568#c6
--- Comment #6 from Stewart Lewis
http://bugzilla.novell.com/show_bug.cgi?id=581568
http://bugzilla.novell.com/show_bug.cgi?id=581568#c7
--- Comment #7 from Stewart Lewis
http://bugzilla.novell.com/show_bug.cgi?id=581568
http://bugzilla.novell.com/show_bug.cgi?id=581568#c8
Stefan Dirsch
participants (1)
-
bugzilla_noreply＠novell.com