https://bugzilla.novell.com/show_bug.cgi?id=832566 https://bugzilla.novell.com/show_bug.cgi?id=832566#c1 Johannes Meixner changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO InfoProvider| |leiber.sven@googlemail.com --- Comment #1 from Johannes Meixner 2013-08-01 15:48:29 CEST --- I provide now epson-inkjet-printer-escpr-1.2.3 in the openSUSE build service development project "Printing" for various openSUSE versions. E.g. for openSUSE Factory x86_64 you can download RPMs from there: http://download.opensuse.org/repositories/Printing/openSUSE_Factory/x86_64/ Note https://build.opensuse.org/project/show?project=Printing -------------------------------------------------------------- The "Printing" project may contain new, upcoming software. Therefore the packages in the "Printing" project might neither be in a stable state nor fit well into currently installed systems. Have this in mind if you think about to install packages from the "Printing" project into your currently running system. Do not use "Factory" if your system is not "Factory". Use the matching packages for your particular system. The packages in the "Printing" project are only for testing, without any guarantee or warranty, and without any support. As an extreme example, this means if your complete computer center crashes because of those packages, it is only your problem. On the other hand this does not mean that those packages are known to be terrible broken but they are not thoroughly tested so that any unexpected issue can happen. -------------------------------------------------------------- I do not have an ESC/P-R printer to test it. Sven Leiber, I would appreciate it if you could test it and provide feedback whether or not it works for you. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.