(In reply to Aman Vaishya from comment #13) > > And rerun the test without a device and plug it in after resume. Provide > > dmesg > > after that. (No zipping) > > Done For the record: The device is detected but communications fail [ 306.733689] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 306.861726] usb 3-3: device descriptor read/64, error -71 [ 307.097814] usb 3-3: device descriptor read/64, error -71 [ 307.333674] usb 3-3: new high-speed USB device number 3 using xhci_hcd [ 307.461738] usb 3-3: device descriptor read/64, error -71 [ 307.697780] usb 3-3: device descriptor read/64, error -71 [ 307.805745] usb usb3-port3: attempt power cycle [ 311.857678] usb 3-3: new high-speed USB device number 5 using xhci_hcd [ 311.985687] usb 3-3: device descriptor read/64, error -71 [ 312.221805] usb 3-3: device descriptor read/64, error -71 [ 312.457679] usb 3-3: new high-speed USB device number 6 using xhci_hcd [ 312.585771] usb 3-3: device descriptor read/64, error -71 [ 312.821759] usb 3-3: device descriptor read/64, error -71 [ 312.929716] usb usb3-port3: attempt power cycle [ 313.581689] usb 3-3: new high-speed USB device number 7 using xhci_hcd [ 313.581867] usb 3-3: Device not responding to setup address. [ 313.789843] usb 3-3: Device not responding to setup address. [ 313.997629] usb 3-3: device not accepting address 7, error -71 [ 314.125617] usb 3-3: new high-speed USB device number 8 using xhci_hcd [ 314.125805] usb 3-3: Device not responding to setup address. [ 314.333847] usb 3-3: Device not responding to setup address. [ 314.541676] usb 3-3: device not accepting address 8, error -71 [ 314.541713] usb usb3-port3: unable to enumerate USB device