[ 7749.986094] PM: suspend entry (deep)
[ 7749.986097] PM: Syncing filesystems ... done.
[ 7750.462682] Freezing user space processes ... (elapsed 0.023 seconds) done.
[ 7750.486459] OOM killer disabled.
[ 7750.486459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds)
done.
[ 7750.487632] Suspending console(s) (use no_console_suspend to debug)
[ 7750.487847] wlp2s0b1: deauthenticating from 18:f1:45:a2:a9:52 by local
choice (Reason: 3=DEAUTH_LEAVING)
[ 7750.533696] queueing ieee80211 work while going to suspend
[ 7750.612726] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7750.668242] e1000e: EEE TX LPI TIMER: 00000011
[ 7750.677727] sd 0:0:0:0: [sda] Stopping disk
[ 7751.326852] ACPI: Preparing to enter system sleep state S3
[ 7751.369047] ACPI: EC: event blocked
[ 7751.369048] ACPI: EC: EC stopped
[ 7751.369049] PM: Saving platform NVS memory
[ 7751.369065] Disabling non-boot CPUs ...
[ 7751.393055] IRQ 26: no longer affine to CPU1
[ 7751.394073] smpboot: CPU 1 is now offline
[ 7751.413070] IRQ 28: no longer affine to CPU2
[ 7751.414507] smpboot: CPU 2 is now offline
[ 7751.441013] IRQ 16: no longer affine to CPU3
[ 7751.441018] IRQ 18: no longer affine to CPU3
[ 7751.442036] smpboot: CPU 3 is now offline
[ 7751.443470] ACPI: Low-level resume complete
[ 7751.443530] ACPI: EC: EC started
[ 7751.443531] PM: Restoring platform NVS memory
[ 7751.444555] Enabling non-boot CPUs ...
[ 7751.444634] x86: Booting SMP configuration:
[ 7751.444636] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 7751.447502] cache: parent cpu1 should not be sleeping
[ 7751.447750] CPU1 is up
[ 7751.447816] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 7751.450652] cache: parent cpu2 should not be sleeping
[ 7751.450860] CPU2 is up
[ 7751.450910] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7751.453675] cache: parent cpu3 should not be sleeping
[ 7751.454040] CPU3 is up
[ 7751.457023] ACPI: Waking up from system sleep state S3
[ 7751.923970] ACPI: EC: event unblocked
[ 7751.934401] sd 0:0:0:0: [sda] Starting disk
[ 7751.934672] ACPI: button: The lid device is not compliant to SW_LID.
[ 7751.987550] dell_wmi: Unknown WMI event type 0x12
[ 7752.170233] usb 1-1.5: reset high-speed USB device number 4 using ehci-pci
[ 7752.174479] usb 3-2: reset full-speed USB device number 3 using xhci_hcd
[ 7752.284760] ata6: SATA link down (SStatus 0 SControl 300)
[ 7752.284793] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7752.284820] ata5: SATA link down (SStatus 0 SControl 300)
[ 7752.286339] ata2.00: configured for UDMA/100
[ 7752.358235] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 7752.590448] usb 3-1: reset low-speed USB device number 7 using xhci_hcd
[ 7753.662209] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7753.799839] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 7753.799845] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 7753.799849] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 7753.800151] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
[ 7753.837449] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 7753.837455] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 7753.837459] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 7753.837763] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device
(Stat=0x51 Err=0x04)
[ 7753.839952] ata1.00: configured for UDMA/133
[ 7754.070251] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 7754.246647] usb 1-1.4:1.0: rebind failed: -517
[ 7754.246651] usb 1-1.4:1.1: rebind failed: -517
[ 7754.246923] OOM killer enabled.
[ 7754.246924] Restarting tasks ... done.
[ 7754.265907] pci_bus 0000:01: Allocating resources
[ 7754.265920] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus
01] add_size 1000
[ 7754.265923] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff
64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 7754.265926] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff]
to [bus 01] add_size 200000 add_align 100000
[ 7754.265933] pci_bus 0000:02: Allocating resources
[ 7754.265945] pcieport 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus
02] add_size 1000
[ 7754.265948] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff
64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 7754.265955] pci_bus 0000:03: Allocating resources
[ 7754.265968] pci_bus 0000:07: Allocating resources
[ 7754.265982] pci_bus 0000:0b: Allocating resources
[ 7754.265997] pcieport 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus
0b] add_size 1000
[ 7754.265999] pcieport 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff
64bit pref] to [bus 0b] add_size 200000 add_align 100000
[ 7754.266010] pcieport 0000:00:1c.0: BAR 14: assigned [mem
0xdfb00000-0xdfcfffff]
[ 7754.266018] pcieport 0000:00:1c.0: BAR 15: assigned [mem
0xdfd00000-0xdfefffff 64bit pref]
[ 7754.266024] pcieport 0000:00:1c.1: BAR 15: assigned [mem
0xf1400000-0xf15fffff 64bit pref]
[ 7754.266029] pcieport 0000:00:1c.5: BAR 15: assigned [mem
0xf1600000-0xf17fffff 64bit pref]
[ 7754.266033] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 7754.266035] pcieport 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 7754.266037] pcieport 0000:00:1c.5: BAR 13: assigned [io 0x4000-0x4fff]
[ 7754.280452] acpi PNP0401:00: Already enumerated
[ 7754.284026] acpi PNP0501:00: Still not present
[ 7754.306394] PM: suspend exit
[ 7756.747883] wlp2s0b1: authenticate with 18:f1:45:a2:a9:52
[ 7756.870356] wlp2s0b1: send auth to 18:f1:45:a2:a9:52 (try 1/3)
[ 7756.871904] wlp2s0b1: authenticated
[ 7756.874157] wlp2s0b1: associate with 18:f1:45:a2:a9:52 (try 1/3)
[ 7756.880592] wlp2s0b1: RX AssocResp from 18:f1:45:a2:a9:52 (capab=0x411
status=0 aid=2)
[ 7756.881271] wlp2s0b1: associated