Comment # 47 on bug 1039163 from Jason Mader

Here are two examples, but MPEG Video wasn't working on any of the computers
with Leap 42.2 installations with NVIDIA (we do not use other graphics, so I
have no other example).  Driver: NVIDIA-Linux-x86_64-378.13.run

25: PCI 200.0: 0300 VGA compatible controller (VGA)
  [Created at pci.378]
  Unique ID: B35A.4kNYRDtRQF3
  Parent ID: _Znp.nMBktMhAWbC
  SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: graphics card
  Model: "nVidia GK106GL [Quadro K4000]"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x11fa "GK106GL [Quadro K4000]"
  SubVendor: pci 0x10de "nVidia Corporation"
  SubDevice: pci 0x097c
  Revision: 0xa1
  Driver: "nvidia"
  Driver Modules: "nvidia"
  Memory Range: 0xfa000000-0xfaffffff (rw,non-prefetchable)
  Memory Range: 0x20fe0000000-0x20fefffffff (ro,non-prefetchable)
  Memory Range: 0x20ff0000000-0x20ff1ffffff (ro,non-prefetchable)
  I/O Ports: 0xe000-0xefff (rw)
  Memory Range: 0xfb000000-0xfb07ffff (ro,non-prefetchable,disabled)
  IRQ: 37 (15024763 events)
  Module Alias: "pci:v000010DEd000011FAsv000010DEsd0000097Cbc03sc00i00"
  Driver Info #0:
    Driver Status: nouveau is not active
    Driver Activation Cmd: "modprobe nouveau"
  Driver Info #1:
    Driver Status: nvidia_drm is active
    Driver Activation Cmd: "modprobe nvidia_drm"
  Driver Info #2:
    Driver Status: nvidia is active
    Driver Activation Cmd: "modprobe nvidia"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #9 (PCI bridge)

Primary display adapter: #25

---

27: PCI 300.0: 0300 VGA compatible controller (VGA)
  [Created at pci.378]
  Unique ID: svHJ.sWjAI4_xKX2
  Parent ID: _Znp.kuTAJnFSM93
  SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:03:00.0
  SysFS BusID: 0000:03:00.0
  Hardware Class: graphics card
  Model: "nVidia GF100GL [Quadro 4000]"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x06dd "GF100GL [Quadro 4000]"
  SubVendor: pci 0x10de "nVidia Corporation"
  SubDevice: pci 0x0780
  Revision: 0xa1
  Driver: "nvidia"
  Driver Modules: "nvidia"
  Memory Range: 0xee000000-0xeeffffff (rw,non-prefetchable)
  Memory Range: 0xf0000000-0xf7ffffff (ro,non-prefetchable)
  Memory Range: 0xf8000000-0xf9ffffff (ro,non-prefetchable)
  I/O Ports: 0xe000-0xefff (rw)
  Memory Range: 0xef000000-0xef07ffff (ro,non-prefetchable,disabled)
  IRQ: 41 (93319611 events)
  Module Alias: "pci:v000010DEd000006DDsv000010DEsd00000780bc03sc00i00"
  Driver Info #0:
    Driver Status: nouveau is not active
    Driver Activation Cmd: "modprobe nouveau"
  Driver Info #1:
    Driver Status: nvidia_drm is active
    Driver Activation Cmd: "modprobe nvidia_drm"
  Driver Info #2:
    Driver Status: nvidia is active
    Driver Activation Cmd: "modprobe nvidia"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #10 (PCI bridge)

Primary display adapter: #27