Bug ID 1219192
Summary On the intel AX200 WiFi there is an issue with 5 GHz (2.4 GHz is fine)
Classification openSUSE
Product openSUSE Tumbleweed
Version Current
Hardware x86-64
OS openSUSE Tumbleweed
Status NEW
Severity Normal
Priority P5 - None
Component Kernel:Drivers
Assignee kernel-bugs@suse.de
Reporter R_Nik_C@proton.me
QA Contact qa-bugs@suse.de
Target Milestone ---
Found By ---
Blocker ---

There is no way to connect to WiFi at 5 GHz (2.4 GHz is fine), there is a
"configuration interface" and that's it.

When I boot older - 6.6.11 kernel, everything seems fine.. issues are on newer
- 6.7.1 kernel.

> lspci | grep Network
04:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a)

> zypper se -is iwlwifi kernel-default NetworkManager
S  | Name                             | Type    | Version      | Arch   |
Repository
---+----------------------------------+---------+--------------+--------+------------------
i+ | kernel-default                   | package | 6.6.11-1.1   | x86_64 |
(System Packages)
i+ | kernel-default                   | package | 6.6.10-1.1   | x86_64 |
(System Packages)
i+ | kernel-default                   | package | 6.7.1-1.1    | x86_64 |
repo-oss
i  | kernel-default-devel             | package | 6.6.11-1.1   | x86_64 |
(System Packages)
i  | kernel-default-devel             | package | 6.6.10-1.1   | x86_64 |
(System Packages)
i  | kernel-default-devel             | package | 6.7.1-1.1    | x86_64 |
repo-oss
i  | kernel-firmware-iwlwifi          | package | 20240115-1.1 | noarch |
repo-oss
i  | libKF5NetworkManagerQt6          | package | 5.114.0-1.1  | x86_64 |
repo-oss
i+ | NetworkManager                   | package | 1.44.2-4.2   | x86_64 |
repo-oss
i  | NetworkManager-bluetooth         | package | 1.44.2-4.2   | x86_64 |
repo-oss
i  | NetworkManager-branding-openSUSE | package | 42.1-6.1     | noarch |
repo-oss
i  | NetworkManager-dns-dnsmasq       | package | 1.0-1.2      | noarch |
repo-oss
i  | NetworkManager-openconnect       | package | 1.2.10-2.1   | x86_64 |
repo-oss
i  | NetworkManager-openvpn           | package | 1.10.2-3.1   | x86_64 |
repo-oss
i  | NetworkManager-pptp              | package | 1.2.12-2.2   | x86_64 |
repo-oss
i  | NetworkManager-tui               | package | 1.44.2-4.2   | x86_64 |
repo-oss
i  | NetworkManager-wwan              | package | 1.44.2-4.2   | x86_64 |
repo-oss

>> 2.4GHz connected, then I tried switch to 5GHz. 
>> When it couldn't do that, it connected to 2.4 again.
>> here dmesg about that.
[ 2116.959020] wlp4s0: AP is in CSA process, reject auth
[ 2132.615435] wlp4s0: AP is in CSA process, reject auth
[ 2143.199413] wlp4s0: AP is in CSA process, reject auth
[ 2159.041293] wlp4s0: 80 MHz not supported, disabling VHT
[ 2159.061350] wlp4s0: authenticate with b0:4e:26:80:7f:03 (local
address=b0:7d:64:63:f2:59)
[ 2159.062684] wlp4s0: send auth to b0:4e:26:80:7f:03 (try 1/3)
[ 2159.094116] wlp4s0: authenticated
[ 2159.098723] wlp4s0: associate with b0:4e:26:80:7f:03 (try 1/3)
[ 2159.108670] wlp4s0: RX AssocResp from b0:4e:26:80:7f:03 (capab=0x411
status=0 aid=2)
[ 2159.176913] wlp4s0: associated
[ 4993.544199] wlp4s0: deauthenticating from b0:4e:26:80:7f:03 by local choice
(Reason: 3=DEAUTH_LEAVING)
[ 4994.135435] wlp4s0: AP is in CSA process, reject auth
[ 4997.149938] wlp4s0: AP is in CSA process, reject auth
[ 4998.975834] wlp4s0: AP is in CSA process, reject auth
[ 5000.552059] wlp4s0: AP is in CSA process, reject auth
[ 5010.486930] wlp4s0: AP is in CSA process, reject auth
[ 5020.067885] wlp4s0: AP is in CSA process, reject auth
[ 5032.642366] wlp4s0: AP is in CSA process, reject auth
[ 5045.645518] wlp4s0: AP is in CSA process, reject auth
[ 5056.675184] wlp4s0: AP is in CSA process, reject auth
[ 5073.646655] wlp4s0: AP is in CSA process, reject auth
[ 5084.415274] wlp4s0: AP is in CSA process, reject auth
[ 5099.885612] wlp4s0: 80 MHz not supported, disabling VHT
[ 5099.908004] wlp4s0: authenticate with b0:4e:26:80:7f:03 (local
address=b0:7d:64:63:f2:59)
[ 5099.909377] wlp4s0: send auth to b0:4e:26:80:7f:03 (try 1/3)
[ 5099.941025] wlp4s0: authenticated
[ 5099.946520] wlp4s0: associate with b0:4e:26:80:7f:03 (try 1/3)
[ 5099.965937] wlp4s0: RX AssocResp from b0:4e:26:80:7f:03 (capab=0x411
status=0 aid=2)
[ 5100.034375] wlp4s0: associated

> dmesg | grep iwlwifi
[    7.297412] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
[    7.311782] iwlwifi 0000:04:00.0: Detected crf-id 0x3617, cnv-id 0x100530
wfpm id 0x80000000
[    7.311820] iwlwifi 0000:04:00.0: PCI dev 2723/0084, rev=0x340,
rfid=0x10a100
[    7.346507] iwlwifi 0000:04:00.0: api flags index 2 larger than supported by
driver
[    7.346525] iwlwifi 0000:04:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version:
89.3.35.37
[    7.346760] iwlwifi 0000:04:00.0: loaded firmware version 77.ad46c98b.0
cc-a0-77.ucode op_mode iwlmvm
[    7.528107] iwlwifi 0000:04:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz,
REV=0x340
[    7.693344] iwlwifi 0000:04:00.0: Detected RF HR B3, rfid=0x10a100
[    7.769562] iwlwifi 0000:04:00.0: base HW address: b0:7d:64:63:f2:59
[    7.790114] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
[    9.613899] iwlwifi 0000:04:00.0: Registered PHC clock: iwlwifi-PTP, with
index: 0


You are receiving this mail because: