Wifi does not work after openSuSE Leap 42.3 RC installation.

Works after update using USB wi-fi module.

This is a problem with laptops without wired ethernet.

Please let me know if you need additional info.

Thank you, Toams

hwinfo --netcard

22: PCI 200.0: 0282 WLAN controller
  [Created at pci.378]
  Unique ID: y9sn.r3IVNFo7763
  Parent ID: Z7uZ.56yQ1PoHR45
  SysFS ID: /devices/pci0000:00/0000:00:1c.3/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: network
  Model: "Intel Dual Band Wireless-AC 8260"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x24f3 "Wireless 8260"
  SubVendor: pci 0x8086 "Intel Corporation"
  SubDevice: pci 0x0010 "Dual Band Wireless-AC 8260"
  Revision: 0x3a
  Driver: "iwlwifi"
  Driver Modules: "iwlwifi"
  Device File: wlan0
  Features: WLAN
  Memory Range: 0xe1100000-0xe1101fff (rw,non-prefetchable)
  IRQ: 282 (24303 events)
  HW Address: 34:f3:9a:ec:f0:59
  Permanent HW Address: 34:f3:9a:ec:f0:59
  Link detected: yes
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104
108 112 116 120 124 128 132 136 140
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457
2.462 2.467 2.472 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58
5.6 5.62 5.64 5.66 5.68 5.7
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v00008086d000024F3sv00008086sd00000010bc02sc80i00"
  Driver Info #0:
    Driver Status: iwlwifi is active
    Driver Activation Cmd: "modprobe iwlwifi"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #15 (PCI bridge)