(In reply to Szymon Kowalczyk from comment #24) > Neither move ath3k out of initrd nor head kernel worked. > > Latest kernel: > > > > Linux linux-u349.site 3.19.0-rc7-3.g6b23e00-desktop #1 SMP PREEMPT Thu Feb 5 > 10:46:44 UTC 2015 (6b23e00) x86_64 x86_64 x86_64 GNU/Linux > > > > [ 5.742346] ath: phy0: WB335 2-ANT card detected > [ 5.742348] ath: phy0: Set BT/WLAN RX diversity capability > [ 5.750444] ath: phy0: Enable LNA combining > [ 5.751578] ath: phy0: ASPM enabled: 0x42 > [ 5.751580] ath: EEPROM regdomain: 0x6a > [ 5.751581] ath: EEPROM indicates we should expect a direct regpair map > [ 5.751583] ath: Country alpha2 being used: 00 > [ 5.751584] ath: Regpair used: 0x6a > [ 5.763973] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' > [ 5.764172] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90012280000, > irq=17 > [ 5.766855] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 > ... > [ 6.968743] Bluetooth: Core ver 2.20 > [ 6.968754] NET: Registered protocol family 31 > [ 6.968755] Bluetooth: HCI device and connection manager initialized > [ 6.968758] Bluetooth: HCI socket layer initialized > [ 6.968761] Bluetooth: L2CAP socket layer initialized > [ 6.968767] Bluetooth: SCO socket layer initialized > [ 6.973899] usbcore: registered new interface driver btusb > [ 9.987144] Bluetooth: Error in firmware loading err = -110,len = 448, > size = 4096 > [ 9.987152] Bluetooth: Loading patch file failed > [ 9.987160] ath3k: probe of 3-7:1.0 failed with error -110 > [ 29.202192] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 29.202194] Bluetooth: BNEP filters: protocol multicast > [ 29.202198] Bluetooth: BNEP socket layer initialized > > > > move ath3k out of initrd: > > [ 5.573570] ath: phy0: WB335 2-ANT card detected > [ 5.573572] ath: phy0: Set BT/WLAN RX diversity capability > [ 5.582490] ath: phy0: Enable LNA combining > [ 5.583691] ath: phy0: ASPM enabled: 0x42 > [ 5.583694] ath: EEPROM regdomain: 0x6a > [ 5.583695] ath: EEPROM indicates we should expect a direct regpair map > [ 5.583697] ath: Country alpha2 being used: 00 > [ 5.583697] ath: Regpair used: 0x6a > [ 8.567859] Bluetooth: Error in firmware loading err = -110,len = 448, > size = 4096 > [ 8.567951] Bluetooth: Loading patch file failed > [ 8.568006] ath3k: probe of 3-7:1.0 failed with error -110 > [ 8.568083] usbcore: registered new interface driver ath3k > [ 31.917499] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 31.917501] Bluetooth: BNEP filters: protocol multicast > [ 31.917507] Bluetooth: BNEP socket layer initialized > > > > What is funny: > > After bluetooth disappear (after resume from suspend) only shutdown wailt > and power on procedure fix it, if i choose reboot problem still exists. This looks rather like a hardware-specific or a firmware problem. In anyway, please report it to upstream. As this is no generic kernel issue, we can't debug here.