User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML,
like Gecko) Chrome/43.0.2357.134 Safari/537.36
Build Identifier:
I have two disks. One has Win7 64b and the other Opensuse 13.2
Until now i was choosing operating system through bios boot order (F12)
For some reason, a few days ago, i have only the Opensuse working.
I found out that i have a software RAID which i never made.In Partitioner i see
sda and sdb without partitions and md126 with partitions.
My problem is similar to Bug 937363, but the given instructions was not worked
for me.
https://forums.opensuse.org/showthread.php/508833-Problem-with-dual-boot-Wi7-amp-Opensuse-13-on-different-disks
My motherboard is X58 based so supports IMSM.
The hard drives were in RAID before installations.
BIOS RAID is disabled. HDD mode is IDE.
Regards
kpaulos
Reproducible: Always
Model: ATA ST3750528AS (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 2155MB 2154MB primary linux-swap(v1) type=82
2 2155MB 45.1GB 43.0GB primary btrfs boot, type=83
3 45.1GB 750GB 705GB primary xfs type=83
Model: ATA ST3750528AS (scsi)
Disk /dev/sdb: 750GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 2155MB 2154MB primary linux-swap(v1) type=82
2 2155MB 45.1GB 43.0GB primary btrfs boot, type=83
3 45.1GB 750GB 705GB primary xfs type=83
Model: Linux Software RAID Array (md)
Disk /dev/md126: 750GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 2155MB 2154MB primary linux-swap(v1) type=82
2 2155MB 45.1GB 43.0GB primary btrfs boot, type=83
3 45.1GB 750GB 705GB primary xfs type=83