Tumbleweed installation on 32 bit machine with:

-->
22: PCI 602.0: 0c04 Fibre Channel
  [Created at pci.378]
  Unique ID: 2i_g.w3edqIfWgp2
  SysFS ID: /devices/pci0000:06/0000:06:02.0
  SysFS BusID: 0000:06:02.0
  Hardware Class: storage
  Model: "QLogic ISP2312-based 2Gb Fibre Channel to PCI-X HBA"
  Vendor: pci 0x1077 "QLogic Corp."
  Device: pci 0x2312 "ISP2312-based 2Gb Fibre Channel to PCI-X HBA"
  SubVendor: pci 0x1077 "QLogic Corp."
  SubDevice: pci 0x0100 
  Revision: 0x02
  I/O Ports: 0x4400-0x44ff (rw)
  Memory Range: 0xf7fd0000-0xf7fd0fff (rw,non-prefetchable)
  Memory Range: 0xa0080000-0xa009ffff (ro,non-prefetchable,disabled)
  IRQ: 20 (no events)
  Requires: qlogic-firmware
  Module Alias: "pci:v00001077d00002312sv00001077sd00000100bc0Csc04i00"
  Driver Info #0:
    Driver Status: qla2300 is not active
    Driver Activation Cmd: "modprobe qla2300"
  Driver Info #1:
    Driver Status: qla2xxx is not active
    Driver Activation Cmd: "modprobe qla2xxx"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
--<

is stuck with the message:

-->
Software                                                                       
                                                                               
                        ��� 
  ���                                                                            
                                                                               
                           ���
  ���These packages need to be selected to install: qlogic-firmware              
                                                                               
                           ���
  ���Please manually select the needed items to install.                         
                                                                               
                           ���
  ���                                                                            
    [...]
--<

y2log tells:

-->
2017-05-11 09:39:09 <2> mortlach(7596) [Ruby] modules/Packages.rb:2080
Pkg::DoProvide failed for qlogic-firmware: The package is not available.
[...]
2017-05-11 09:39:14 <1> mortlach(7596) [Ruby]
installation/proposal_runner.rb:491 proposal returns warning with level blocker
and msg These packages need to be selected to install:
qlogic-firmware<br>Please manually select the needed items to install.
--<