The latest kernel 4.12.14-lp151.28.40 breaks the wifi on my laptop
It is a HP Laptop 14-bs153od
with wifi device:
02:00.0 Network controller [0280]: Intel Corporation Dual Band Wireless-AC
3168NGW [Stone Peak] [8086:24fb] (rev 10)

Here are the relevant difference of /var/log/boot.msg of the two kernels.

2,3c2,3
<  Linux version 4.12.14-lp151.28.36-default (geeko@buildhost) (gcc version
7.4.1 20190905 [gcc-7-branch revision 275407] (SUSE Linux) ) #1 SMP Fri Dec 6
13:50:27 UTC 2019 (8f4a495)
<  Command line: BOOT_IMAGE=/vmlinuz-4.12.14-lp151.28.36-default
root=/dev/mapper/system-root modprobe.blacklist=floppy splash=verbose
resume=/dev/system/swap mitigations=auto quiet
---
>  Linux version 4.12.14-lp151.28.40-default (geeko@buildhost) (gcc version 7.5.0 (SUSE Linux) ) #1 SMP Fri Mar 6 13:48:15 UTC 2020 (f0f1262)
>  Command line: BOOT_IMAGE=/vmlinuz-4.12.14-lp151.28.40-default root=/dev/mapper/system-root modprobe.blacklist=floppy splash=verbose resume=/dev/system/swap mitigations=auto quiet
659a659,678
>  iwlwifi 0000:02:00.0: Can't parse phy_sku in B0, empty sections
>  iwlwifi 0000:02:00.0: Failed to read NVM: -61
>  EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
>  EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
>  EDAC pnd2: b_cr_touud_hi_pci=000000001 ret=0
>  EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
>  EDAC pnd2: b_cr_asym_mem_region1_mchbar=080b80000 ret=0
>  EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
>  EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
>  EDAC pnd2: b_cr_slice_channel_hash=8000001080000014 ret=0
>  EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
>  EDAC pnd2: d_cr_drp0=000000000 ret=2
>  EDAC pnd2: d_cr_drp0=000000000 ret=2
>  EDAC pnd2: d_cr_drp0=0c000c005 ret=0
>  EDAC pnd2: d_cr_drp0=000000000 ret=2
>  EDAC pnd2: ECC disabled on channel 2
>  EDAC pnd2: Failed to register device with error -22.
>  iwlwifi 0000:02:00.0: Failed to run INIT ucode: -61
675,676d693
<  iwlwifi 0000:02:00.0: base HW address: 94:b8:6d:a4:cc:25
686a704
>  Invalid pltconfig, ensure IPC1 device is enabled in BIOS
691,693c709
<  ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'

If more information is needed, please let me know.